following attempt to install mesa-libGL-devel?
[code]...
Look like I've created a circle as the last rpm depends on the first? Note that for the second rpm, Xau and Xdmcp are loaded:
[code]...
Short description of the problem: I need to have freeglut3-dev, libglu1-mesa-dev, libgl1-mesa-dev and libgl1-mesa-swx11 installed at the same time. How to do it?There are no hardware drivers for my GPU (ATI Radeon HD 4290), so I must use the software rasterizer:libgl1-mesa-swx11. Fortunately I have a very fast hex-core CPU so rendering in software doesn't slow down the computer.I make OpenGL games in C, so I need these packages to be able to compile my games:freeglut3-devlibglu1-mesa-devlibgl1-mesa-devBut if they are installed, libgl1-mesa-swx11 must be replaced by libgl1-mesa-glx.libgl1-mesa-glx is the hardware rasterizer and doesn't work, because I don't have the needed hardware drivers.Currently, I have to install/remove/reinstall those 4 packages before compiling a program and then do it again after compiling to be able to run the program,
View 1 Replies View RelatedI'm working on a Fedora 13 server trying to intal some soft following the same steps I did with some other server with Fedora 12 ( not 13, like the new one ).First problem that I found was with 'yum install kernel-devel'
Response: Nothing to do !
Then I tryed 'yum -v info kernel devel'
Response:
Installed Packages
Name : kernel-devel
Arch : x86_64
code....
Second problem that is stopping me is 'yum install gcc' Some dpendency problem that can not be solved. Tryed --skeep-broken but nothing is installed.I don't have gcc on my sistem.
from what I understand kernel-devel does not bring in ALL the header files for install modules. so what i would like to know is how to install true headers instead of using kernel-devel. I found one tutorial, but it was way out of date.
View 3 Replies View RelatedI was trying to compile a new (stable) kernel and got an error when I tried "make xconfi packages and uninstalling 81 packages (will attatch pix once home). I'm using Fedora14 with KDE packages and uninstalling 81 packages. I'm using Fedora14 with KDE so much stuff to get qt-devel?
View 4 Replies View RelatedI have a new system I built this week. I have the nvidia drivers installed, but desktop effects, googleearth and Quake4 all try to load the /usr/lib/libGL.so.1 from mesa-libGL and fail to start.I have two other machines, both with nvidia video, and don't have the problem with them. I've looked for differences on the systems, but haven't located anything so far.
View 2 Replies View RelatedI have tried to install this package with yum and also directly - download the rpm, then rpm -Uvh ....
Both yum and rpm hang - yum when running the transaction test.
Any ideas about this package.
This is running F12, uname -r => 2.6.31.9-174.fc12.i686
On F13 i386 inside Virtualbox. Host is a Win7 x64 box.
This may just be more idle curiosity than anything else since the server still works. . . but it's really bothering me because I can't explain it.
My (limited) understanding is that the devel files are just the source files and shouldn't actually affect peformance.
Yet, prior to installing httpd-devel (and its dependencies), /etc/init.d/httpd restart takes about 2 seconds total. After installing httpd-devel, the "stopping" phase of the httpd restart take 5-7 seconds (which seems really long when you're just sitting there waiting on it.
yum install httpd-devel also installs the following for dependencies:
db4-cxx
db4-devel
cyrus-sasl-devel
apr-devel
apr-util-devel
openldap-devel
expat-devel
All but one of those are devel files as well. And here's the real kicker: Uninstalling them through YUM doesn't put things back to normal (even after reboot).
I'm no linux expert. But I wouldn't think installing devel files would have this effect or any effect like this since they're just source code files (?). Can anyone explain what's happening or give me tips on how I can watch the apache process stop and see what's hanging it up?
I have a problem to install the VMware Server (VMware-server-2.0.2-203138.x86_64.rpm) on "Fedora 13 Desktop Edition 64-bit".I traied all tips I found, but nothing was OK.Please look my linux configuration and the error messages:
(VMware installation)
[root@localhost BKP]# rpm -Uvh VMware-server-2.0.2-203138.x86_64.rpm
Preparing... ########################################### [100%]
1:VMware-server ########################################### [100%]
The installation of VMware Server 2.0.2 for Linux completed successfully.Before running VMware Server for the first time, you need to configure it for your running kernel by invoking the following command: "/usr/bin/vmware-config.pl".
code....
This is a clean FC12 install but I did add a few repos to support chromium and adobe - pretty much as described here:
[URL]
This is what happens - I tried all the cleanup suggestinons with no effect. Anyone got any ideas please? Thanks...
[eric@zeppelin ~]# yum repolist
Loaded plugins: presto, refresh-packagekit
repo id repo name status
[code]....
I tried to install SDL-devel on a 64 bit Fedora 12 computer. I get this
Code:
[root@Fedora dolphin-emu-read-only]# yum install -t SDL-devel
Loaded plugins: presto, refresh-packagekit
Setting up Install Process
Resolving Dependencies
[Code]...
I need to insall SDL-devel to compile Dolphin, can I force it to continue or not perform a dependency check? When I try to remove it, it tried to remove tons of files as dependencies, can I stop it from doing that?
I have some question about package manual installation - time by time I am facing up with some circle dependances issue: 2 packages could be dependent by each other (f.e. pearl or odbc), so error comes when you try to install it with dpkg -i option, so I would like to know how to install this packages together?
View 3 Replies View RelatedI am creating an openSUSE 11.2 Kiosk image. I have everything pretty much locked down but when I go into the gconf-editor under /apps/nautilius/preferences/show_desktop and uncheck the check box my mouse pointer changes to the circle icon that looks like it moves in a circle. Sortta like the busy or what it does during boot. Hard to describe by typing it out but if you make that change you'll see what I am talking about. I had this setup like this in previous versions of openSUSE so I am not sure what it is doing or what else I need to do to make the mouse pointer just the arrow like normally. I don't want the users to be able to right-click on the desktops to get a menu nor add icons so unchecking the show_desktop has served my needs.
View 3 Replies View RelatedIm not able to install the package mesa-32bit from this repository: Index of /repositories/X11:/XOrg/openSUSE_11.3. It tells me to make a huge change on architecture on many packages, plus downgrading mesa to 7.8.2 from 7.9 !
View 9 Replies View RelatedIve also tried downloading RPMs to a usb stick and it said it was the wrong ones for my machine.
How do i find out if my machine is x32 x64 x86?
Anyway im trying to install kernel headers and devel from the fedora installation disk but i dont know how to get to the cdrom thru terminal as i cant copy the RPMs to desktop by drag n drop or using software installer.
I dont have an internet connection to the pc so i cant use yum (which would make things so much easier) so can anyone tell me how how to install these packages thru terminal?
I used Acronis' Disk Director Suite 10.0 ["DDS"] to create 7 logical partitions of 23GB each, into one of which I asked Fedora 11 to install. Fedora 11 completely ignored me and created 2 primary partitions of its own: a 217.4GB, a 2GB and a 2GB "unallocated." I will likely delete this installation for a number of reasons. How can I force fedora to install into a 23GB logical partition that I created for just that purpose? If I can't use DDS-created partitions then why do I need DDS-created partitions?
View 8 Replies View Relatedi have newlly creatde g drive ntfs formatted so can i install f14 in that partiotion if yes than how ? means which option i need to select when the screen appears which shows select parttion [use free space , replace existing partion and all]
View 7 Replies View RelatedCan anyone explain why aptitude install libgl1-mesa-dri actually removes a lot of packages? I just ran it without checking and the job was done...
aptitude install libgl1-mesa-dri
The following packages will be REMOVED:
bsh{u} bsh-gcj{u} gcj-4.4-jre{u} gcj-jre{u} libcolamd2.7.1{u}
libcommons-beanutils-java{u} libcommons-collections3-java{u}
libcommons-compress-java{u} libcommons-digester-java{u}
libcommons-logging-java{u} libdb-je-java{u} libdb4.7-java{u}
libdb4.7-java-gcj{u} libgcj10-awt{u} libgraphite3{u} libhsqldb-java{u}
code....
I am looking for a thorough document that explains:
1) Creating a local repo
2) Using kickstart to access that repo
3) Performing a network install using kickstart
Some background: I have several racks of servers that I need to install Fedora on. These servers CANNOT be placed on the internet; hence the need for the creation of a local repo on some other machine (which will be connected to the servers via a local network). I am not sure how to create a local repo, so that one of my questions.
I'd also like to automate as much of the install as possible and kickstart is the only thing I know of for that. I am no guru with kickstart, but I have used it before to successfully install Fedora Core 6 -- I am hoping there are no great changes with the current releases of Fedora (12-14)?
A local repo of Fedora Core 6 was created by someone (some time ago) on a workstation (running FC6). This is what I've used in the past to install FC6 on previous servers (via a kickstart CD). However, I dont have the documentation on how the repo was created or how the kickstart CD was created I've gleaned some ideas ok kickstart from the pieces I've read on web, but none of it has been specific to the latest releases of Fedora.
I'm using an ATI Mobility Radeon 3450, an R6xx card, with the radeon driver. I've been wanting 3D acceleration and was considering trying the experimental DRI support with Mesa 3D. So my questions are:
1. How experimental is experimental at this point? Is the specific mesa-dri-drivers-experimental package more-or-less static?
2. Would I be better off with Mesa 7.6 from the repository or 7.7? What would be the best approach before installing it?
I'm taking a course in school on computer graphics and we are using Linux as the main operating system. I myself am more accustomed to using windows but have always wanted to give Linux a try. So the other day I dual-booted my laptop with Fedora 12 and so far I'm liking it. I do have one main question however. I need to install Mesa to do my OpenGL programming with but I'm not sure how to install it. I have downloaded a tar.gz file from the Mesa website and have tried running it from the terminal by using these commands: (note: the commands are from the Linux Newbie Guide i found on google)
cd /Tudor's Home/local
tar -xvzf /Tudor's Home/MESA/MesaLib-7.7.tar.gz
cd "the new directory it was extracted to" (gets changed to the actual extraction folder)
./configure
make
make install
Now, I'm not sure why this doesn't work. The extracting doesn't even work so I'm not sure whether these commands are the same in Fedora or what I am doing wrong? I have installed aMSN from an rpm file and it worked perfectly but I'm not sure how to install using makeFiles. Any good tutorials on makeFiles and how to install them? or a link to Mesa as an rpm file? So I can start learning OpenGL.
i'm trying to rebuild mplayer and facing the same error - lame-devel package can't be found as when i try to use rpmbuild. I'm not sure why and how to fix it. Here are steps and information:
[Code]...
In several threads I read about installing an ati card on fc12. mesa-dri-drivers-experimental should be a good choice. So I installed it, made a reboot and nothing changed. In the xorg.conf "vesa" ist set. When I put "mesa" there and reboot, x dont starts. Whats wrong? Btw I am using igp hd 4200 and fc12-64bit
View 3 Replies View RelatedI installed mesa-dri-drivers-experimental package using yum in Fedora 12. I have an ATI Mobility Radeon HD 3450. After the reboot as soon as the fedora bubble fills up the screen goes blank with a blinking cursor. You can type in that black screen and do nothing else. When you press alt+ctrl+del a few services are stopped and the system is rebooted.
View 2 Replies View RelatedI've been struggling with getting my graphics card configured under a fresh install of F13. I have an ATI Radeon HD 5450 1GB DDR3 and when I run glxinfo this is the result:
Code:
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating, ....
What concerns me are the lines:
OpenGL vendor string: Mesa Project
OpenGL renderer string: Software Rasterizer
If I try to enable Desktop Effects it tells me I have no 3D acceleration. So 3D acceleration not supported for this card using the open source, stock install drivers? I'd like to avoid the proprietary ATI ones if I can. Background on the video card here: [URL]. It's the cheap-o model in the HD 5XXX series and based on the article above it seems to be more of a beefed up version of the HD 4XXX chip design than a true HD5XXX series card.
I just found new mesa-dri drivers in the updates-testing repo, installed all of them, uninstalled kmod-nvidia, and it just worked with my geforce 9500GT. For me, this is a huge step forward, the only thing still giving problems is the DVI signal, so I'm stuck in VGA. Even then, I was able to get a better resolution with the DVI signal using this testing drivers than with the nvidia ones (I tried several links suggested by DBelton in the nvidia-installation thread for fixing the DVI issue, to no avail).
View 4 Replies View RelatedI have a program that needs kernel headers. The machine is running CentOS release 5.4 (Final).
uname -r output: 2.6.18-164.9.1.el5
When I try to do a - yum install kernel-devel or kernel-headers I get:
kernel-headers i386 2.6.18-194.3.1.el5 updates 1.0 M
Why don't they match?
I've got a new 5.5 64-bit install that has been updated to 5.6 this morning. While installing nspr-devel through yum i get stuck at the following dependency:
nspr-devel-4.8.6-1.el5.x86_64 from base has depsolving problems
--> Missing Dependency: nspr = 4.8.6-1.el5 is needed by package nspr-devel-4.8.6-1.el5.x86_64 (base)
nspr-devel-4.8.6-1.el5.i386 from base has depsolving problems
[Code].....
I found out that to compile my new kernel - which requires 'qmake' - I need to install the "qt-devel" package. Doing so - according to the package manager - would require uninstalling 81 packages and downgrading almost 50 other packages.
I'm running under Fedora 14 w/ KDE and it's asking to remove things like Amarok and OpenOffice. Am I missing a step or something?
qt-devel 00.png
qt-devel 01.png
qt-devel 02.png
I'm trying to install the package imlib2-devel in a CentOS 5 x64 but I'm getting the following message
Quote:
GPG key retrieval failed: [Errno 5] OSError: [Errno 2] No such file or directory: '/etc/pki/rpm-gpg/RPM-GPG-KEY-rpmforge-dag'
I already installed the rpmforge package. I'd like to know what that message is about and how I could solve it.
