The other day there were a number of updated needed on my server which I installed with yum (the software updater GUI). Now my websites are not coming up even on the server using http://localhost
I reviewed the info and found that httpd was updated to 2.2.3-45 and am suspecting that this is the cause of the issue. So my silly little question is how do I roll back this update?
U have spent 4 days trying to configure my router thinking that it is my router that is not working but when I go to my dynamic dns or my static ip address it takes me to my admin router on the local computers.when I type httpd it says it cannot bind to port 0.0.0.0:80 i checked it is set up to listen to port 80 this is really confusing me i am beginning to think the people who built my server did not set it up properly if i go to localhost or 0.0.0.127 it goes to the apache default page fine.I have not changed anything since it wad installed except the centos 5 updates any ideas?When i login my password is root and the password is the default I have changed nothing else on the system as I still have no clue about it.Just to clarify on my router I have port 80 and port 443 set to my static ip address is this correct or should it be the eth0 Bcast ip address?Can anyone give me an idea of what i need to check? On my router I have set up port 80 and port 443 and dynamic dns and static ip address.Sorry I am totally new to linux never used it before would be nice if anyone has any ideas how i can proceed with this.
View 1 Replies View RelatedWe are running CentOS 5.4 x86 on ESX 4 Server. We have a busy Help Desk, a Forum and several name-based websites running. Weve been using CentOS for this 'purpose for several years (different versions) and so far we have never had a problem. On Saturday, I applied all the latest updates including the Kernel updates. I rebooted the server and all seemed well until Sunday morning when I didn't get my Logwatch in the mail. Then I got a telephone call from a customer asking me why I hadn't responded to a Trouble Ticket he had created on Saturday afternoon (creating a TT sends an email via sendmail to all the support staff). I did a few tests and sendmail has just stopped working. The Logwatch had been created and had been sent to root, but all mail for root is redirected to my Mail Server on e different box (GroupWise). There was nothing wrong with the mail server, but sendmail has just stopped.
Fortunately I had created a snapshot before I applied the updates, so I reverted back to the snapshot and mail started working again, but I lost 2 days info because I had run the backup before I applied the patches. Now I see there are 132 Updates available, but there is obviously a problem somewhere in there!
I've installed Apache Tomcat--6 and even jdk1.6.I've even created a tomcat.sh file to start the serverautomatically and it includes the Environment variables also ($CATALINA_HOME & JAVA_HOME) for automatic startup.Next when i'm using http://localhost:8080 to call the server it shows unable to connect.I've tried changing the port no of tomcat in server.xml file. but still its not working.
-->Then i tried using--telnet localhost comand--it shows Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
telnet: Unable to connect to remote host: Connection refused
Here I'[m stuck i don't understand how do i make the localhost work.
-->If I'm giving telnet localhost 25 the sendmail server is working.But the 80 and 8080 ports are not getting configured.
-->I've tried adding the port and its name in /etc/services file but still its not working.
-->When I'm giving the command--/sbin/chkconfig --list--->Its shows: xinetd based services:
...
...
telnet on.what should i do to get my tomcat server work properly.
I run mysqld on another server. I just switched to another dedicated server now, and i'm having trouble connecting to the mysqld server. If i run the php script from the bash console( php connect.php ) it works perfectly and connects to the mysqld server. However, if i run the script from apache ( http://localhost/connect.php ) it returns this: Can't connect to MySQL server on '(mysqld real ip)' (13) Mysql connection from another server(old httpd server) works perfectly, so it's not from the database server.
View 4 Replies View RelatedI need CentOS to communicate with an MS SQL Server 2000.I have installed FreeTDS and PHP and the following work:TSQL (using and selecting from the SQL Server)PHP from Shell (running a script from the shell)
View 5 Replies View RelatedI am running a quad core centos 5.4 box that is having a strange problem with dovecot. The administration panel is able to send emails through dovecot but not any of the user accounts (ie with webmail). I've done a bit of research with what could be wrong but haven't had any luck so far I am also having a weird problem with apache: on a c++/php bittorrent application I was going to be running on a subdomain of my main site I get a 500 error every time I try to log in. The only way to get rid of the 500 error is to clear the chache (so its horribly broken somehow). The error generated in the log whenever I try to log in is that "ffmpeg is already loaded" (which I am running on the main site and is critical). Is there a way of either repairing my apache install or excluding ffmpeg on the subdomain in the conf or something?
View 2 Replies View RelatedI have a dedicated server running Centos 5.2. I have a Wordpress MU site that's setup over apache 2, mysql 5, php5, and I use phpmyadmin as well. I'm able to read the database as my website appears perfectly fine, however, I can not write to it. What exactly do I need to install on my Centos sever to allow my site to interface with the database? I've used shared servers and VPS's with no problems but this just won't work. The support team seems clueless and I'm ready to ask them to reinstall my entire OS and everything else again.
View 2 Replies View RelatedI try to update my kernel to 2.6.18.128.4.1.el5 using
# yum update
After # yum update # rpm -qa kernel*|sort gives the following:
kernel-2.6.18-128.1.14.el5
kernel-2.6.18-128.1.16.el5.centos.plus
kernel-2.6.18-128.4.1.el5.centos.plus
kernel-2.6.18-92.1.18.el5
kernel-2.6.18-92.el5
kernel-devel-2.6.18-128.1.14.el5 .....
This my grub.conf:
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that all kernel and initrd paths are relative to /boot/, eg.
# root (hd0,0)
# kernel /vmlinuz-version ro root=/dev/VolGroup00/LogVol00
# initrd /initrd-version.img
#boot=/dev/hda
default=1
timeout=5.....
yum update installed:
CentOS (2.6.18-128.4.1.el5.centos.plusxen) and
CentOS (2.6.18-128.4.1.el5.centos.plus)
both are not working. I have to run the system using: 2.6.18-128.1.14.el5. Upon trying again #yum update it says that no packages are marked for update. Can I manually install the desired kernel? Do you know a reason why yum update is not automatically installing the proper kernel?
I'm running CentOS 5.4 and noticed that for the past month there haven't been any new updates showing up either on 'yum check-update' or 'yum update' (I'm interested in basic and security updates). Although this may be right, I wonder if there is an online reference where I can check the updates that are released for CentOS (security bulletins) and make sure if there is anything wrong with my update system.
View 11 Replies View RelatedHey all! For the past week or so, I've had a losing battle with the Update Manager. I try to install my updates, but... well this screenshot should describe my explanation. Does anyone have any ideas as to how I could get my updates installed?
View 1 Replies View RelatedI installed updates a few days ago and now my computer just hangs. After the blue and white bar at the bottom of the screen disappears when loading F11, I get a blank screen with the following: ADDRCONF (NETDEV_UP): wlan0: link is not ready. I think this happened after I had some kernel updates installed. The only way I can get Fedora to run is by booting up with a previous version. How do I fix this? I seem to be having alot of issues with updates messing up some part of my system lately.
View 14 Replies View RelatedI am running openSUSE 11.4 KDE 4.6.5 on my desktop AMD64. Just added R47 repo in order to upgrade KDE 4.6.5 to 4.7. However, after running zypper up I saw lots of packages not being updated.code...
View 4 Replies View RelatedI noticed this today for the second or third time since getting 10.04: all my machines are installing security updates automatically, despite the fact that KPackageKit is set to 'only notify about available updates.'
Am I just being stupid, missing a setting somewhere, or is this a bug? Aside from the fact that I like to know what's being installed, I often use my laptop on satellite or other bandwidth-metered connections (as was the case when it happened today), and I don't want the OS to start dictating how much I owe my ISP at the end of the month!
I'm running Ubuntu 10.04, and I had some trouble with an old Drupal installation, so I ran the script below in an effort to revert PHP back to version 5.2. The script below didn't work for me, and now Update Manager gives me the message "Not all updates can be installed", presumably because the script changed the repository for some of the software from lucid to karmic.Script which "broke" Update Manager:Quote:
#!/bin/bash
# by Ruben Barkow (rubo77) http://www.entikey.z11.de/
# Originally Posted by Bachstelze http://ubuntuforums.org/showthread.p...74#post9080474
[code].....
I am a recent convert to Ubuntu and have the Ubuntu 10.10 version installed on my computer.All has been going on well until I installed FreePops. Since then, when I check for updates through the Update Manager, it shows that it's searching for updates but then it brings up a pop up stating the following "Failed to download repository information" and under this the following is mentioned "W:Failed to fetch [URL], E:Some index files failed to download, they have been ignored, or old ones used instead."I have removed FreePops from Synaptic Package Manager but the above mentioned error still appears and updates cannot be installed. I have rebooted my computer also and performed the updates but the error still appears.
View 2 Replies View RelatedToday when I started my computer I got an error from the updater saying the Following
Ubuntu 10.10
Not all updates can be installed
Run a part upgrade to install as many as possible.
This can be caused by:
*A earlier update that hasn't been complete
*Problem with parts of the installed software
*In offical program packages that havent been "?Something?" By ubuntu
*Common changes in a early version of ubuntu
So what should I do? Just take Part update? And do you know what may be the cause of this. Only thing I installed lately was a "game" from the ubuntu Program central and I haven't run it and I restarted my computer 1 time before this when having it installed.
Running fine for a couple of weeks now, my Ubuntu Lucid install on a Sony laptop Vaio VGN-N21E went through some updates an hour ago. After the updates were installed, I shut the laptop down. The shutdown was slow but graceful with no errors. Now, when I try and power back on, I get errors about CIFS stating that the network share I map to could not connect. Also, that the network could not connect. I usually connect wirelessly and had no problems until now. It lets me log in but freezes after I see my desktop. No cursor or keyboard response...no response to CTRL+ALT+DEL...I can only manually force shutdown....
View 9 Replies View RelatedMy laptop is sadly rather elderly and the battery is broken, so if it is unplugged it loses power and immediately turns off. Unfortunately I managed to accidentally do exactly this in the middle of upgrading from Lucid to Natty. I turned the computer back on, some automated disk checks were run, and I'm now apparently using Maverick.
Launching Update Manager, I get the following message:
"Not all updates can be installed
Run a partial upgrade, to install as many updates as possible.
This can be caused by:
*A previous upgrade which didn't complete
*Problems with some of the installed software
*Unofficial software packages not provided by Ubuntu
*Normal changes of a pre-release version of Ubuntu"
Clicking the "Partial Upgrade" option, the system starts to upgrade but exits with the following in the Terminal:
"dpkg: parse error, in file '/var/lib/dpkg/updates/0121' near line 42 package 'texlive-xetex':
duplicate value for 'Status' field"
Basically I have no idea what to do from here. The functions that I need from my computer are working (internet, music player) and I don't really need much more than that but I'd rather it was working. Also I can't install any updates or upgrade to Natty until this is solved.
i was being a little impacient with my friends Dell Inspiron 1545 tonight.. i was updating to 11.04 from 10.10 and decided to install adobe flash player plugins at the same time... so since i was installing 11.04 it wouldnt install adobe...i went back to the distribution upgrade now this pulls up... Not all updates can be installed run a partial upgrade..... i hit run partial...now this comes up.. Can not upgrade An upgrade from 'maverick' to 'lucid' is not supported with this tool. when i hit reload this comes up AN ERROR HAS OCCURRED W: GPG error: [URL] maverick Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 16126D3A3E5C1192
View 9 Replies View RelatedIve gotten a project from a local school in a very rural town to upgrade the computer systems on a very low budget. So, being a F/OSS advocate I ran the idea of a linux environment which, in reality will cost hundereds (maybe thousands) less for them, and also cut down "down-time" due to viruses and such. I was thinking of Ubuntu since its got a great community, and personally, I love it. Problem is, this school is on a limited bandwidth for internet, so installing ubuntu and performing the updates is not a feasible idea since the cost will be astronomical. My question is, how can I go about an simply "update" the ubuntu 8.10 LiveCD so that when I install it, It will have all the updates? Another thing that would be nice, is that this school would like to have their own wallpaper, so if I could change the default wallpaper while I'm performing this "update" will be very nice.
View 5 Replies View RelatedIn general CentOS search automatically after startup for available software updates.Then after some (~20-30) minutes an icon appears in the toolbar which the user can click and install the updates.How can I manually speed up/trigger IMMEDIATELY the search for updates (without waiting for the built-in search)?
View 3 Replies View RelatedI am installing Big Brother on a CentOS 5.2 running the default Apache 2.2.3. When I try to access any web page I get the following error: Forbidden You don't have permission to access /bb/ on this server. Apache/2.2.3 (CentOS) Server at fmsubbnix Port 80 So far I have:
1) Set the Directory options to FollowSymLinks
2) Verified all directory and file permissions are at 755
3) Set permissions temporarily to 777 and received same error so I am assuming the issue is in a config file somewhere
4) in hhtpd.conf verified <Files ~ "^.ht"> is correct
5) verified the "default" directory is correct (/var/www/html)
I have read and tried several ideas in posts listed on the web but to no avail and am at a loss as to what to look for next..
I am using the latest Ubuntu 10.04 Lucid lynx. Sometimes ago while I am updating my operating system to linux-image-2.6.32-25-generic (2.6.32-25.44) with update manager, after downloading all the files it was running the installation. During installation suddenly my pc turned off, may be for some power issue. Then while I again start my pc and tried to restart the update process the update manager show me a message. "Not all updates can be install. Run a partial upgrade, to install as many as updates as possible."
This can be caused by:
* A previous upgrade which didn't complete.
* Problem with some of the installed software.
* Unofficial software packages not provided by Ubuntu.
* Normal changes of a pre-release version of Ubuntu.
Then I tried to open the synaptic package manager. But it didn't open either and show another message which suggest to run the command in the terminal: "sudo dpkg --configure -a". And unluckily it wasn't work. and show the messgae:
"dpkg: parse error, in file '/var/lib/dpkg/updates/0103' near line 0: newline in field name `#padding'".
Everything was fine and dandy then I installed tonight's updates (about 6 of them - 2 or 3 for GTK and a couple of others) and now the close button at top right of the Firefox window doesn't work The buttons are still there, and the minimize and restore work ok, but the close button just flickers and leaves the window open. Also, if I right-click the tell-tale in the bottom bar of the desktop and slect "close" nothing happens. The FF window stays there
I can't think of any other way to close the window besides ending the processes in System Monitor. I can open other windows (like Home folder or Synaptic) and close those without a problem by clicking on the close button. It's just Firefox with the problem, so I don't think it is a Window Manager problem.
I've got 10.4.1(rev190?) installed in what I guess is Wubi and have been running dual boot for a couple of weeks now. My other OS is XP. I recently ran the updater then shut the computer down for a week. I can't remember now if I had to restart to complete any updates or not but my laptop battery is fried so once I unplugged it after it completed shutdown all power was removed from the system for 9 days. Today I tried to boot Ubuntu and after I chose it from the boot menu it flashed some sort of message about WUBILDR really quick (I wasn't able to read it all) then went through its normal boot until the Ubuntu splash screen where one dot went red and the system hung.
I allowed it a good 15 minutes to see if it would unhang but no dice. It boots fine on XP. Any advice? I'm reading the Wubi Megathread right now but as I'm new to Ubuntu I figured I'd check to see if anyone else experienced these particular problems here, too. Right now I'm going to download the Ubuntu installer to a disk to try some of the Megathread troubleshooting.
I ran Update Manager and installed updates. Now flash video and other things with flash content wont work.
To give one example. I go to a web I use frequently and the following message is displayed at the top: "Additional plug-ins are required to display media on this page"
I click on "install mising plug-ins" and select Flash Player-installer. Bu then it tells me it's already installed! This has only happened since last night when I installed the updates!
There have been no updates recently (for almost two months) on any of my CentOS 5.5 boxes when I run 'yum check-update'. I may be misunderstanding the repo setup, but looking at the file mod dates, it seems that there hasn't been an update since 2011-01-06:[URL]...Meanwhile, a prominent North American Enterprise Linux vendor has had multiple security and bug fixes since then:[URl]...Is CentOS 5.5 still getting updated, or am I missing something (quite possible).
View 12 Replies View RelatedAfter doing an update a couple of days ago (had previously upgraded to 5.6), the font size in firefox (file forward reload, etc), terminal and the panel (using xfce) are significately smaller. Searching the web, mail lists and the forums have not resulted in finding anyone else with this problem. I did notice that glibc has a bug that is currently being worked on at Redhat but it is unclear if the font problem I am seeing is related. Note also, that the initial upgrade to Centos 5.6 was successful.
View 8 Replies View Relatedalthough there is inbuild apache in my fedora9 , but i am unable install it by manually. Is it a problem , if already i have apache in my system?
View 1 Replies View Related