The find command is taking too long on my machine to complete. When I use time command, I find that sys time and user time are too small as compared to real time. Is my find process not getting scheduled properly?
I interrupted the neverending find command and got the following statistics:
Real time : 5min
Sys time : 1.1 sec
User time : 3 sec
I was running
find / -name ls 2>/dev/null
I'm having a problem with my mail. When I send mail, it takes a long time for the send to complete.In the below, datestamp is just a simple script to put in a no-white-space date/time stamp.
Code:
$ datestamp ; mail woodnt; datestamp
02-05-10@193844
[code]....
I have about 200k data entries in xml file. I wrote php script (using php-xml) to read xml file and insert into mysql. At first it went really quickly inserting, then after a while after inserting 100k entries, it slowed right down, just like it would not even doing anything. I have CentOs with 512M on VirtualBox running as server.
View 3 Replies View RelatedQuote:
#!/bin/ksh
DBcounttry_finalnofunc()
{
[code]....
in ubuntu 10.04 After logging in t All I had was the wallpaper & my widgets for around a minute, and then the usual upper and lower panels appeared.. didnt had this problem in 9.10
View 4 Replies View RelatedI have just made a clean install of Ubuntu 9.10 and after installing all updates, GDM is taking a long time (about one minute) to come up after a clean boot, resulting in a regular console prompt.
If I issue "sudo service gdm start" it does come up promptly.
What can I do? Where can I see startup logs to try and identify any problems?
I compressed a directory containing many image files. The directory amounted to 5.3gig. Compressed with TAR using .tgz the compression took a couple minutes at most and compressed down to 4.3 gig. Compressed using .bz2 the compression took about 90 minutes and compressed down to 4.2 gig. Hardly worth the extra time. Do these numbers look normal to you?
View 1 Replies View RelatedI don't know if it is just me but it seems like Ubuntu takes a long time to start up programs. For example, it takes me 10 seconds to start up "Ubuntu software center". My computer is a relatively fast one. It has 4 gb of ram and an intel core duo processor. I didn't install that many programs. Does anyone know what might be the source of the problem and how to fix it?
View 6 Replies View RelatedI switched to Fedora from Ubuntu about a month ago, and I've been very happy so far. But today I started the upgrade to Fedora 15, and something isn't right. I used the preupgrade method, and the package download took a respectable 30-40 minutes, then I was prompted to reboot my machine. I did so, about 4 hours ago. It took about 2 hours to get to the point where it says it's installing the packages, and 2 hours to get to where it is as I write this, at 116 completed packages out of 1634.
I'm pretty sure this isn't normal for ANY distribution. The machine itself is about 6 months old, so I'm pretty sure it's not a hardware issue. I'm considering interrupting the upgrade and doing a clean install, but I was wondering, is there anything I can do before resorting to the clean install option?
I just want to find out if anybody else is having a similar issue before I start trying to disable services one by one. When I boot in to F15, everything runs fine up to were it starts loading the CUPS module then it hangs for about 2 to 3 minutes, the next thing to load is Samba shares. So it could be either of these or it could have nothing to do with them. Just to add that I made 100% sure that all my samba shares mount fine and are online and have no shares mounting in my fstab file.
View 2 Replies View RelatedI am following this howto to install Apache, MySQL, and PHP5:
[URL]
I have just installed Apache and I am pointing my browser to:
http://192.168.0.100
but I am getting the error message that the server is taking too long to respond.
while installation of debian 5 from small cd ... does configuring apt take a lot of time!!! installing debian for the first time.
View 1 Replies View RelatedI tried to update fedora 15 and it took too long , even the cleaing of packages took too long At the end of the update got the status cleaning up packages that took even longer than the whole update.
View 3 Replies View RelatedI purchased a special collection boxed Superman set for my 10 year old daughter in May for her birthday and recently some second hand Zumba DVD's. My daughter is quite hard on DVD's. So I have as asked her to wait whilst I have them copied.
I will be using the Zumba regularly and know they will suffer so want use copies and save the originals.
I have done some reading and I think I have everything installed correctly.
I tried K9copy, but it immediately closed. I then tried K3b and noticed I needed 99GB of space. (I wonder if that is why K9copy closed?) The only thing I have that big is my backup external drive.
So I connected it up. I only had about 44 GB of space on it. I ticked for half the tracks which needed less space. So now there was enough space. I then clicked on rip DVD. It has been doing it continuously for 2 nights and is up to 24%.
So at this rate it will take a week to copy half a DVD to my drive and then I have to burn it to a DVD. This can't be right, can it?
I am running OpenSuse 11.3
I'm running Ubuntu 9.10 on a VPS with linode.I run around 10 sites from this vps and whenever I try to do anything thats related at all to email (such as user registration, contact form submission) the process itself can take anywhere from one to five minutes. I realize that this is most likely due to a misconfiguration with how my email has been set up.
View 3 Replies View RelatedIt takes an exceptionally long time for basic graphic actions to occur like switching tabs in Firefox, redrawing windows that have been (un)maximized/minimized, and switching between windows. My video card is not a bad one, a GeForce 9500 GT and Windows handles it just fine. I'm using the current NVIDIA drivers 265.35. It seems like if I can't get some better response time I'll be using Windows much more.
View 3 Replies View RelatedI am backing up data from a remote server onto a local ntfs partition. It seems that the rm -rf and cp -a commands are taking a long time to complete in what should be short, incremental backups.Has anyone had similar problems when backing up to an ntfs partitionHere is my rsnapshot.conf:
Code:
#################################################
# rsnapshot.conf - rsnapshot configuration file #
[code]....
I am using KVM and created four guest Operating systems on it.The server host is Ubuntu 10.04.I am using 4 websites in a reverse proxy environment.One of our website is running on CentOS VM.Right now there is no traffic on the website static HTML pages.I do not have any clue as why it was taking longer time to be accessed.
View 2 Replies View RelatedRunning first upgrade after installing 9.10.
Currently on item "Configuring linux-image-2.6.31-20-generic" and the progress bar/terminal readout has not changed for an hour or so I'd say.
Don't want to cause issues by killing it halfway through, especially as it presents an opportunity to learn something!
I had this come up in logwatch: /dev/sda5 4.8G 3.6G 960M 80%/
Any ideas how I can find which files are suddenly taking up the space?
I am working in ubuntu 9.x (linux karmic kernal) .I have restored the content from CD to hard disk. In the mid way of this process, it was failed. I would like to know this below thiongs,
1) which position it got failed ?
2)Any offset option is there in linux to point the particular CD position ?
I want to search in many many files for a string.
I used find /archive/* -print0 | xargs -0 grep 'robert' -sl
Is there a simple method to do it ?
When i open one of the web browsers i use and try to load a web site it's taking to long to respond and sometimes it doesnt load the website at all. I have tried with firefox,epiphany,opera with all the same results. I am sure that this is not a problem with my internet connection because i don't have these problems with windows.Also the network manager connection settings are correct
I also tried choosing the old kernel(2.6.32.24) to boot from but no success.The problem is the same as if i am using the 2.6.32.25 kernel. The strange thing is that i can download packages from synaptic with full speed. Last think.I have recently downloaded the recommended updates from the update manager but i don't remember what are the things that where updated.
how to run a shell script taking command line arguments in a jsp page.
View 1 Replies View RelatedI'm trying to do a
find /photos/* -type f -mtime +365
to find all my pictures that are over a year old, but I keep getting argument list too long. How can I view what all the results are, even if it just dumps it to a file that I have to open?
How to break strings of command into multi-lines in crontab? e.g.
Code:
# the following is a very long a gruesome command to be run at 09:59 Monday to Friday.
59 09 * * 1-5 source $HOME/some-definitions; sh /usr/local/my/long/name/application/bin/hello $(date +\%Y\%m\%d) >>/var/log/my/long/name/application/log/hello.log
I need to delete all *.trc files that are older than 30 days and I am getting a "Argument list too long" error. There are other files that should not be deleted which is why I am using the "*.trc" and newer files need to be kept as well. I have seen other postings but they do not cover both of the conditions. Below are 2 of the many attempts at doing this but I cannot get this to work.
find *.trc -mtime +31 -print| xargs rm -f {}
find *.trc -mtime +31 -print -exec rm -f {} ;
I have 4 Linux machines with cluster.My target is to find all kind of IP address (xxx.xxx.xxx.xxx) in every file in the linux system remark: need to scan each file in the linux system and verify if the file include IP address if yes need to print the IP as the following
more /etc/inet/file.example1
182.23.2.4
255.255.0.0
10.10.1.1
I am trying to do a find/grep/wc command to find matching files, print the filename and then the word count of a specific pattern per file. Here is my best (non-working) attempt so far:
wc `find . ( -name "*.as" -o -name "*.mxml" ) -exec grep -H HeightResizableList {}` ;
Is there a way to specify to find that I only want text files (and not binary files)? Grep has an option to exclude binary files, so I thought find probably has a similar feature, but I've been unable to find it.
View 2 Replies View Related