I copied 10.4 from a 20gig hd. onto an 80 gig hd with Clonezilla and now I can't get Gparted to expand the partition to include the 50 gig that is unallocated. Obviously I cloned the drive incorrectly.
I have a dual boot machine ( win 7 & Ubuntu 10.04 ) which is reporting insufficient space on the Linux partition. I boot up into gparted and reduce the size of the the preceding partition but when I try to increase the size of the following ( linux ) partition, it won't allow it. Attached is a screenshot of the gparted info screen.
I have booted up in a Gparted system disk. I'm trying to use Gparted to resize my current linux partition. It sits on a one HDD with another Windows partition.I have delete the windows partition (626GB) and now want to resize my linux partition to use all this unallocated space. When trying to resize the linux partition (293GB) I am not able to do so. No space is shown to be available to use. I can only make the partition smaller. Can anyone think of why I won't be able to increase my linux partition to use this now unallocated space?
I have 3 Ubuntu installations & a PCLINUXOS, plus Windows XP installed on one hard disk. I still can boot to each one of them and can mount each one using Ubuntu.
The problem "may" have occurred when I reduced the size of some linux partitions using gparted. I still have plenty of space in each of those partitions.
When I started gparted all of the HD was unallocated. I did that from each ubuntu installation and the PCLINUX installation, plus LIVECDs. All indicated the space was unallocated.
When I did an fdisk -l from a Puppy Linux LiveCD I got a normal start and ends of each partition.
When I tried it from Ubuntu installation or live cd, I received the following types of responses:
Code: ubuntu@ubuntu:~$ sudo fdisk -l /dev/sda5
Disk /dev/sda5: 28.5 GB, 28566397440 bytes 255 heads, 63 sectors/track, 3473 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System ubuntu@ubuntu:~$ sudo fdisk -u /dev/sda5
The number of cylinders for this disk is set to 3473.There is nothing wrong with that, but this is larger than 1024,and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Plus the Windows partition seems to go over its limits.
Since all of my OS installations are still working, I don't know how critical this is. From reading another post, I understand this might be able to be fixed by making some changes in fstab.
I have 4 primary partitions on my hard drive. One of these partitions has been divided into 3 logical partitions with some free space left over. The order is this: "swap", "/", "/home", and about 80GB of unallocated space. I want to incorporate that unallocated space into the home partition. I tried this by booting a live CD and starting GParted but it didn't give me the option to increase the size of my home partition or the primary partition as a whole. The only thing it would let me do is decrease the size of my home partition.
I have installed ubuntu in my 500GB passport drive. The ubuntu partition size is 120GB. I want to increase the root partition size because i ran out of disk space for "/" I have installed Gparted and accidentally created new partition table. Then all my disk space turned into unallocated space. So, i immateriality rebooted my system. Then, I am not able to boot into the drive. Moreover it is not detecting in windows too. How to undone that "MISTAKE" ??
I have a server setup running VirtualBox and several Windows guests. I'm running the box headless and start the windows machines using
sudo vboxheadless -s "WinXP Pro SP3"&
via SSH session from my MacBookPro in terminal. I then connect to the Virtual Machines running MS Remote Desktop from the MacBookPro. All of this works perfectly except that I've run out of space on my partition for Virtual Machines and need to create a few more. I have plenty of room on the HDD but when first installing Ubuntu Server I only partitioned and formated about 1/4 of the drive. Is it possible to run a command in my SSH session at the command line to partition the unused portion of the HDD, format it, and expand my current partition into that space? Or, do I have to use something like gpartedlive, boot from the CD and do the partitioning?
Currently, I have on internal HDD 160GB in size. 20GB are for windows XP partition and the rest is assigned for ubuntu partition(s?). i want to make it now more equal in size, but how can i do that? I'm using ubuntu 11.04...
How does one back up the oses and increase the partition size?
I have a dual boot of Windows 7 and Ubuntu and have made the partitions for each too small. I want to save them and then reinstall them on the new partitions. I've tried clonezilla, but it only restores them to the original partitions. How can I reinstall them on the new partitions?
Is it possible to increase the size of a partition that is using LVM?I have 5GB of unpartitioned and unallocated space on my disk. I wish to add this to my VG. This free space is physically before the LVM partition.Can I increase the size of the physical partition using pvresize? Or is the only way to to create a new 5GB partition, add it to the VG and allocate it to the LVs? This is not ideal as I wish to minimise the number of partitions I have on the one disk.
whenever I try to download anything I get the error there's not enough space on my home partition; thus I was wondering if anyone would be able to tell me how to increase its size? I'm using ubuntu via vmware workstation.Here is the output of df:
Filesystem 1K-blocks Used Available Use% Mounted on tmpfs 254964 0 254964 0% /lib/init/rw varrun 254964 52 254912 1% /var/run
As can be observed above, I have used almost 70% of the available partition space with only 1.7 GB remaining. I have plans to install Microsoft Office 2007 on Wine and I know that 1.7 GB is not enough for the installation. I don't mind reducing the size of my Windows partitions in order to increase the size of the root.
I have done it quite often. Inserted and run the computer from a live CD so that the hard drive is not mounted an changed the partitions. It worked on the old reiserfs when I wiped the windows partition on my laptop to increase the space, it worked on ext3 partitions. Now I resized the swap partition and reduced the NTFS partition on my desktop - no problem. But it does not increase the ext4 partition. No error message it just does not do it. I tried several times with the suggested maximal setting, with a custom setting, etc. It just does not change size. Just for interest I booted into Suse11.0 live CD and tried from there. There I get the answer cannot resize partition as the file system does not allow resizing. Is something wrong with the system or does the partitioner not work with ext4?
fedora 12.i have one partition which is mounted on a rootfiles folder having space of 700gb which is located on a /directory.but when im adding data on rootfiles my /root directory space is also getting increased.so could any one telme how to increase the size of root partition.i want to resize my rootfiles folder to 600db and want to add 100gb to my / directory.how can i do this plz helpme this is important 4 me.first i will free 100gb then i will add 100gb to root directory.but i dont want to loose any data on rootfiles folder.
I have nearly 200GB of space free on the HD with my linux main EXT4 partition, and I'm wondering if I can convert a large part of this to a new NTFS partition that I can use for my windows XP paralell install?
Basically, what do I have to do to resize and create the new partition and how do I get windows to recognize it?
I removed an ntfs partition I had in my HD and then resized my home partition with gparted to occupy all the available space. The resulting partition is supposed to be 129GB, and gparted/partition magic see that size. But the system does not, and all tools report the old partition size and the same free space I had before resizing.
When I downloaded the ISO file thru DAP it showed up as 699.44MB but when I completed the download onto my HDD (XP SP3 & NTFS) it shows up as 716,230KB (see below) with a result when I try to burn on to a CD. I get an error that the file is too large. Whats happening, is there a solution to this?
Finally i have installed ubuntu 10.10 on my home PC. Its working so so good i cant really imagine :-). At the time of partition due to my immaturity, i selected the size of '/' to be 10 Gb. Now i want to increase it without reinstalling ubuntu. Is there any safe way of doing it ? i did some research and came to know that Gparted might be of some help, but i will really be grateful if any of you can guide me.
the use of livecd for example, can i use liveusb instead ? i was thinking of making liveusb of centos 5.5.
I am very much new user of ubuntu and hardly know anything about linux. What is swap memory? I have dual boot system with windows7 and ubuntu 9.04. My hard disk size is 320GB and RAM is 4GB. Currently swap memory size is 4.3GB. Can I increase swap size? Will it have any advantage? How to do that?