CentOS 5 Server :: Setting Up Mail Userdb And Passdb?
Jun 30, 2010
Quick advice type question regarding setting up mail servers. Need to write in params under default auth section in the dovecot config file. Background: I have a home network set up with junk rack servers operating various Linux distros. I am sitting behind a Smoothwall linked to dyndns.org.
For this topic, I have one Ubuntu server which is just acting as my ssh so I can play around with my entwork on the Droid. Then I recently got CentOS 5 running on a Dell 1550 and I decided to try to run a mail server.
Situation: Using this site, [URL].. I set up my dovecot.conf file with this:
auth default {
socket listen {
client {
path = /var/spool/postfix/private/auth
mode = 0660
[Code]...
View 3 Replies
ADVERTISEMENT
Mar 20, 2011
I've setup my server by following a ton of goods, and it seems to work ok, but I need to start using my server for email in order to receive orders placed via my website. I've followed this guide - [URL] I followed the steps above, and tested the mail server via telnet, and all seemed to be ok. I tried sending an email via Squirrelmail, from cs@thinclientwarehouse.co.uk TO my working email simon@c1systems.co.uk, but the server returned with the following message:
<simon@c1systems.co.uk>: host mail.c1systems.co.uk[95.128.128.129] said: 550-Verification failed for <cs@localhost.thinclientwarehouse.co.uk> 550-The mail server could not deliver mail to cs@localhost.thinclientwarehouse.co.uk. The account or domain may not exist, they may be blacklisted, or missing the proper dns entries. 550 Sender verify failed (in reply to RCPT TO command)
View 14 Replies
View Related
Feb 19, 2010
I am trying to figure out how if it is even possible to set up my centos server to email messages to gmail account I have tried mail -S Test account@gmail.com but every time it say in my log files that Connection refused by [127.0.0.1]
View 1 Replies
View Related
Oct 12, 2010
I have to administer a few mail servers, a mail log server, 4 nameservers and a web server -all running on Centos 5 server distributions. Now I have a task: to avoid accidental crashes on the production servers while installing updates, my boss asked me to do clones (these clones will all be VMware virtual machines) of the servers (EXCLUDING the actual e-mails and mail log contents) and then to run those clones on VMWare Server. This way, first I will install and test updates on the clones and - if they will be running without crashes - I will apply the updates on the real production servers themselves. I have already installed VMWare Server 2.0 I have a few questions:
- How do I build the virtual machines to exclude the actual mail files and mail logs? Can I use VMware Converter for this purpose, or do I have to use another program?
- How do I actually do this cloning? Is there a tutorial on how to do this?
View 3 Replies
View Related
Apr 21, 2010
i'm trying to send a mail with "mail" on my cent os console , but without success. In Suse it's quite simple with "mail": mail -r sendersaddress@domain -s "subject" targetaddress@domain </tmp/filewithcontent
View 6 Replies
View Related
Sep 2, 2010
I am using Centos 5.4. sending e-mails through our network(LAN).i want to create a e mail address's for each user and wants to give facility to sending,viewing,replying & forwarding office e-mails
Note : we dont have a DNS server in our LAN.
View 2 Replies
View Related
Apr 5, 2010
What would i need to do to set up a mail server on Fedora 12? I already have a secure file server running on it, and im curious what it would take to also use it as a mail server.
View 5 Replies
View Related
Jan 5, 2011
I would like to run a mailing daemon on my system that would receive incoming mail and forwards it to my Gmail account. I have no experience in mail services and forwarding mail at all. where to start reading and/or look for clues?
View 3 Replies
View Related
Aug 12, 2010
I want to setup mail server on LAN (Local Area Network). How do I setup local SMTP server to be able to send emails?
View 4 Replies
View Related
Apr 16, 2011
how the whole mail server thing works, and what software handles what job. From my understanding POP3 and IMAP are protocols to pull email from a mail server, and SMTP is used to push email to a server. There are many programs that I've seen involved with creating a mail server, but I'm trying to use just Postfix. Postfix can send and receive email right?
My server runs in my basement and runs Ubuntu Server 10.10. It uses Cherokee as its web server, and it runs several other servers as well (SSH, FTP, Git, etc). My goal is to set up a mail server so that websites I run such as a Redmine or a web forum can send emails to people (e.g. an activation email for a user registering on a forum).
Anyway, I set up postfix, and now my server can receive email. I've been able to send an email from my Gmail address to drew@minipenguin.com (my server), and it works. However, if I try to send email from drew@minipenguin.com to my Gmail, it never goes through. I don't care about receiving email, as my only goal is to be able to send it.
View 5 Replies
View Related
Jul 27, 2011
I'm setting up a server and trying to make it *very* secure. Before I configured my web stack, I was about to install some security packages, Tiger and Samhain, but these packages wanted to install sendmail so that they can send outgoing notifications. From the reading I've been doing, I believe I want postfix instead of sendmail. It is my (perhaps mistaken) belief that installing postfix first will prevent them from installing this sendmail I do not want.
I want to install postfix with the following goals in mind:
* let PHP scripts send mail using the mail function.
* various system notification functions (cron, etc.) will be able to send their emails
* emails destined for root@localhost will be redirected to admin@mydomain.com
* let tiger and/or samhain send their notification emails
* NO INCOMING OR LOCAL MAIL IS PERMITTED. Because mail for my domain is handled by google apps, nobody will be checking mail on this server. Also, this server has very limited disk space. It is therefore very important that we don't have mail accumulating in boxes that will never be checked.
* no unnecessary ports, services, or cron jobs are running.
I've been reading a variety of pages that describe postfix setup on Ubuntu but these articles are imprecise, incomplete, and describe installation of things I don't want like POP/IMAP/etc.
There's also one final wrinkle. I will be setting up postfix to send via Amazon SES.
View 3 Replies
View Related
Apr 2, 2010
I want to set up a mail server on ubuntu so i can send emails from php using the mail function. The mails will only be sent locally. When I say locally I mean just to hosts on my lan. I want to be able to set up an email address for each person on the lan but all they need to be able to do is receive email. This is for a website from which they will receive emails.
View 5 Replies
View Related
Jan 4, 2011
I would like to be able to have email sent directly to my computer at home (i.e. run some kind of mail server on it) instead of having to rely on Gmail, Yahoo or someone else. From what I've read it should be possible, but most of the guides out there seem to be oriented to enterprise-class setups, or at the very least a small business, and I think that a lot of that would be overkill for just getting my personal mail. The minimum *I think* is
- register a domain name, with the DNS pointing to my public IP (which is dynamic, so one question I have is whether I would have to use DynDNS or is DNS at any registrar going to be flexible enough to modify if/when my IP changes?)- something about MX records (I'm really unsure here, what exactly are these and where do I set them up? I don't think a free DynDNS account lets one handle this, does someone know which of their account types supports setting this up?)
- Install sendmail and postfix (which seems like a PITA, but much documentation appears to be available)
- Profit?
View 2 Replies
View Related
Jan 11, 2011
I have a web server that is only accessible to those in the local network. Since it is mainly a testing server, i want to add a test mail server to this system so i can test my programs that email out before i make them public and find out they dont work. I've done this before a while back, but dont recall how i did it or even what the software was(it was for windows, but i want to go linux this time)
View 1 Replies
View Related
Mar 25, 2011
To setting up the mail server for my site. The situation is such that it is necessary to allow access through the site (built under LAMP) to the mail server. Ligament postfix + dovecot good option? or who have a similar configs mail server.
View 1 Replies
View Related
Sep 22, 2009
i have fedora5 installed on my machine MACH1, which acts as a linux server for few machines. Its over network and we have a dedicated mail server too which is globally accessible. I wanted to set up a local mail server on MACH1, so that i shall be able to send/receive mails from all the users as well as to our other global mail server(on internet).
View 3 Replies
View Related
Dec 1, 2009
I have setup mail server on Ubuntu 9.10 and it's is working fine.I am using Webmin to addministrate my mail server.My Ubuntu server name abcs.I send a test mail from Wedmin for user gom.Why it keep adding InfoNet. What I would like is setup as gom@abcs.com.
View 1 Replies
View Related
Aug 20, 2009
I got a system with RHEL 5.3 Server with dovecot, sendmail, and thunderbird. I have found tons of stuff online about configuring a mail server, but little of it tells me how to get mail from a client to the server. I've tried to work with Postfix, Pine, Sendmail, Thunderbird, and the list goes on. I'm probably so confused now that I'm not even going to convey this properly, but let me try...... I got a system called wks90 which I decided would be my mail server. I installed dovecot, sendmail, and thunderbird. Then did some basic configuration via stuff I found online. Now the test, from the command line I use the simple "mail" command which succeeds. I bring up thunderbird and eureka!!! there is a message in /var/spool/mail/george.
Now here is where I get confused and things fall apart. I go to another system named wks50. I try some similar setup in sendmail trying to point it to wks90 as the server, I assumed dovecot was not needed, made and entry in /etc/aliases, and will use my thunderbird on wks90. So at the wks50 command line I mail -v to george@mydomain.priv. The message seems to work ok, but still goes to wks50's /var/spool/mail. How in the name of sanity do I get the mail to go to /var/spool/mail on wks90? OR somewhere that is centrally located. I tried to mount /var/spool/mail to wks50, but then wks50's mail to root started queueing up and going nowhere.
I guess I got the whole concept of mail wrong somewhere in my thinking. I just want the mail from any client to wind up at one server (wks90) and in a central location on wks90 so that any client like wks50, wks60, and wks70, using thunderbird, can read the mail from that central location. To me this sounds like I need to mount that central location to each client, but how do I then deal with the queuing root mail? Or is sounds like a need something like that old "movemail" command to take it and move it. I have another server that is the HOME server (server1). The physical location of all $HOMEs is here i.e. /home/george.
View 4 Replies
View Related
May 23, 2010
setting up my LAMP server to send email messages through my cable network SMTP server. If you respond please realize that I am new to linux/apache. I cannot send emails out with the built in email server on Suse and don't even know if it is enabled. I used to do it with my IIS/ColdFusion server but there were options for the outbound SMTP server and authentication. I have searched and think I have to use something called Pear but to be honest the instructions are vague to say the least and it all looks greek to me.
View 2 Replies
View Related
Oct 6, 2009
I would like to setup postfix to act as a relay for the outgoing mails of a couple of servers each serving it's own domain.The mails we are talking about are standard administrative emails like user registration, password reset request. The volume of those mails will naturally grow as the site grows. Which for me poses the problem that depending on the growth of the site you will sooner or later hit the quotas imposed by (my otherwise preferred) providers like GMail or smtp.com.
So what I need is a mail relay that will only accept mails from authenticated clients from hosts in its access list and relay their mail without restrictions. Is that possible with postfix? What has to be changed in the config and what are the pitfalls?
View 1 Replies
View Related
Oct 12, 2010
I have a few mail servers, a mail log server and a web server running on Centos 5. Now I have a task: to avoid accidental crashes on the production servers while installing updates, my boss asked me to do clones (these clones will all be VMware virtual machines) of the servers (EXCLUDING the actual e-mails and log contents) and then to run those clones on VMWare Server. This way, first I will install and test updates on the clones and - if they will be running without crashes - I will apply the updates on the real production servers themselves.
I have already installed VMWare Server 2.0 I have a few questions: How do I build the virtual machines to exclude the actual mail files and mail logs? Can I use VMware Converter for this purpose, or do I have to use another program? How do I actually do this cloning? Is there a tutorial on how to do this?
View 4 Replies
View Related
Feb 12, 2009
I have one server at home, connected through a router that gives me a static IP:192.168.1.2 - My PC192.168.1.3 - CentOS serverI enabled the port 80 into router forwarding system and I can connect properly to CentOS server, using the IP my internet provider gives me. My router automatically forwards a changed IP to my dyndns.com account so I can also access the server through a domain name (I pay to have it linked to one of my domains).My next step is to configure the mail server (dovecot) , so I can send emails from my local server(192.168.1.3).I was wondering if anyone has any tutorial links or tips to have the mail server configured through a home internet provider + home router.
View 5 Replies
View Related
Oct 14, 2010
Could it be the IMAP file is corrupt?I have set up mail server on Centos to receive via dovecot.One of my user accounts (A single account out of a hundred)cannot receive their mails.
View 3 Replies
View Related
Jul 22, 2011
I am running a CentOS 5.6 Server with a website and Forum. The website has a contact form and users can email various people in the organization. I have setup sendmail to send any mails like this to my email address on a Windows machine.The problem is that there emails don't have a header which has the senders original email header. It comes from localhost on my sendmail. How can I get any mail generated from the apache site to ALSO send mail to root on the Centos Server? That way I should be able to see the header and report the spammer or block them.
View 2 Replies
View Related
Feb 22, 2010
What is the easiest way to setup an incoming and outgoing mail server on centos? Without using a control panel, such was webmin.
View 2 Replies
View Related
Nov 23, 2009
I followed the Wiki guide for configuring my Postfix server for SASL / TLS. I don't get any errors and I assume it's working but when I try and test SASL (saslauthd), I don't get the response noted according to the Wiki and I don't understand why.
View 3 Replies
View Related
Feb 18, 2010
I try to install SSMTP mail server on Centos 5.4 and I have a following error >>
[Code]....
View 3 Replies
View Related
Oct 1, 2010
i have successfully done the setup of postfix and dovecot on this link [URL]I run Cent OS on top of window 7 via VM Player,i want to access mailbox from windows 7 using email client like Thunderbird and Outlook. What setting i need to do in my mail server ?
View 1 Replies
View Related
May 23, 2011
I am using Postfix on CentOS to send mail through a relayhost. The mail sends fine, but on certain clients such as the mail client on the iPhone or Windows Live Mail, the message is received with '(No Sender)' in the sender field. The Apple Mail client on the iMac works just fine.
Here is the PHP code I am using to send the mail code...
Wondering if there is a configuration setting in /etc/postfix/main.cf I can use to fix this problem. I have scoured the help files but have come up empty.
View 5 Replies
View Related
Feb 15, 2011
I am trying to setup CentOS server 5 with tftp where the Cisco switch configs can be sent. I have the following:
[code]...
View 14 Replies
View Related
