I'm trying to setup postgresql84 with uuid support, everywhere says that postgresql84-contrib should do the trick but it does not. I even generated the uuid-postgres and uuid rpms from source for uuid-1.6.1 and no luck with the uuid support.
View 3 Repliesmy server is sun x4450.Memory is 64G RAMinstall CentOS 5.3 64bit.free -m only dispaly 32G RAM,but BIOS can display 64G RAM.how to setup support 64G RAM?
View 1 Replies View RelatedI seem to have another issue with my raid system
mount -a
mount: special device UUID=fb518c74:2b6bd0f4:66db5ce6:7e004239 does not exist
but when i do mdadm -vv --detail /dev/md5 ... this is what i get --->
/dev/md5:
Version : 1.1
Creation Time : Fri Feb 25 14:07:36 2011
Raid Level : raid1
[code]....
I am working on setting up a bind 9 nameserver that will be responsible for serving up DNS records for my internal network and publicly for my web server. My configuration is below:
Firewall Gateway (Ubuntu Server 9.10) ---> switch ---> internal servers (ubuntu server 9.10 and mac os x server)
The internal servers are all on the same subnet, so DNS, web and mail will all be on the same subnet of private IPs. Each internal server is mapped with SNAT to a public IP address. And the DNS server only has port 53 forwarded to it.I am trying to figure out the best way to set up my nameserver so that it can provide records for my internal servers based on private IP addresses, and then provide records to the public for my internal servers based on their public IP addresses. I had a few questions on this:
1) Is this the correct way to think about my setup, or is this typically done in another way?
2) Does anyone have recommendations on the specific configuration I should follow?
3) Are there specific references I should look into as well?
Is it possible to setup dhcp server in such a way that even if a client disconnects for a short period of time (5 - 10 minutes) the dhcp server keeps that address for that specific client and lease it back. Tracking can be done using the mac address of the client.
View 2 Replies View RelatedWe are trying to set up a NIS server on a CentOS system. We need to have a NIS server which can provide NIS authentication to a couple of clients. We are practically new to all this stuff.
Just googled to find some ideas about installing ypserv and ypbind and portmapper. We did all that and also started them successfully. But now the clients are not able to join to the NIS domain . The error log states "YP_DOMAIN NOT BOUND".
I guess we have not entered the /etc/yp.conf, /etc/hosts files properly. Please let us know the detailed steps to setup a NIS server .
Also, please let us know what entries should go into the different /etc/<file_names>? What is meant by HOSTNAME in the /etc/hosts file?
Is there any other files which need to be changed? Are we missing any steps?
Also to add-on, while executing the ypinit command we faced the following error:
At this point, we have to construct a list of the hosts which will run NIS servers. localhost.localdomain is in the list of NIS server hosts. Please cont inue to add the names for the other hosts, one per line. When you are done with the list, type a <control D>. next host to add: localhost.localdomain next host to add:
The current list of NIS servers looks like this:
Is this correct? [y/n: y] y
Error running Makefile.
Is there any way to setup the Centos Directory Server without an internet connection?? i tried using the command: yum install centos-ds
but this just tries to connect to the internet to to download the packages. Is there a site where i can find the package so that i can copy it to my server and install it or is there some other way to do this?
I have a dvr card that is a Softlogic 6x10 line of MPEG-4 codec card that uses mpeg 4. This is the driver that they recommend that I use but it is for ubuntu. Is there a Centos 5.5 equivalent? [URL]. This is the card: [URL].
This is what appears in lspci:
PHP Code:
03:06.0 Multimedia video controller: Unknown device 9413:6010
I found this on the net: [URL] and installed
PHP Code:
kmod-video4linux-PAE-0.0-7.20100410.2.el5.elrepo.i686.rpmkernel-ml-PAE-2.6.37-0.3.el5.elrepo.i686.rpm
I get this error when I run a modprobe budget_av:
PHP Code:
modprobe budget_avWARNING: Error inserting videobuf_dma_sg
(/lib/modules/2.6.18-194.32.1.el5PAE/weak-updates/video4linux/videobuf-dma-sg.ko):
Unknown symbol in module, or unknown parameter (see dmesg)WARNING:
Error inserting v4l1_compat (/lib/modules/2.6.18-194.32.1.el5PAE/weak-updates/video4linux/v4l1-compat.ko):
Unknown symbol in module, or unknown parameter (see dmesg)WARNING:
Error inserting videodev (/lib/modules/2.6.18-194.32.1.el5PAE/weak-updates/video4linux/videodev.ko):
Unknown symbol in module, or unknown parameter (see dmesg)WARNING:
Error inserting saa7146_vv (/lib/modules/2.6.18-194.32.1.el5PAE/weak-updates/video4linux/saa7146_vv.ko):
Unknown symbol in module, or unknown parameter (see dmesg)FATAL:
Error inserting budget_av (/lib/modules/2.6.18-194.32.1.el5PAE/weak-updates/video4linux/budget-av.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
I have to deploy Linux server(apache, php , Mysql) for production environment. whether I should go for RHEL5 or CENTOS5 and why.... Also if RHEL5 then Can use RHEL5 without license if I dont want support from Red Hat.
View 6 Replies View RelatedWe have CentOS 5.3 and are using sendmail for outbound emails. We are trying to switch over to authsmtp service. Authsmtp requires sendmail built with SASL suport.
How do I find out if my sendmail has been built with SASL support? If it is not, is it easy to build it with SASL support?
I'm trying to setup RAID 1 on a CentOS 5 server for a zimbra email server.I get a partion schema error. Can I do this?The server is a HP Proliant ML150 G3 server with two 80GB HDD.
View 1 Replies View Relatedhow to install freeradius with dialup admin support on CentOS 5. .
View 1 Replies View RelatedI have installed CentOS 5.3 with Xen on a PowerEdge 2650 machine with 6GB of RAM. As usual, PAE was already enabled so I did not have any problem with utilising all of the memory. However after upgrading to the latest release of the kernel (2.6.18-128.7.1.el5xen), memory available decreased to 4GBs. Then I switched back to the old kernel and 6GB was there. Then finally have switched back to the new kernel and 6GB is again there. So now PAE seems to be enabled but what concerns me is the inconsistent behaviour. (Also I am not sure the reason was the upgraded kernel.)
View 2 Replies View RelatedWhat is the easiest way to setup an incoming and outgoing mail server on centos? Without using a control panel, such was webmin.
View 2 Replies View RelatedI am trying to get an X window server setup on my CentOS 5.3 server rack. I have gotten as far as to doing:
yum groupinstall "X Window Sever" "GNOME Desktop Environment"
EDIT-Forgot to mention that I did Xorg -configure before testing the config. Only errors I got were:
(EE) LoadModule: Module ati_r500 does not have a ati_r500ModuleData data object.
(EE) Failed to load module "ati_r500" (invalid module, 0)
[Code]...
Linuxquestions--I posted this over on the CentOS forums, which are not as booming. Then I remembered these forums for when I had my VPS way back when and you guys were pretty helpful, of course expected me to mostly do my own reading which I dont mind its just having a hard time understanding some of the things in what I was reading. I even believe I came here with this problem before but abandoned the issue because my VPS was not powerful enough or something of the sort, but this was many years ago also on CentOS using apt. Now using yum which I like much better.
I am trying to set up a mail server on centos5 using sendmail and dovecot, and eventually spamassassin and some antivirus filter as well. I'd also like to get the proper secure auth mechanism set up at some point too. But for starters, I've been having a lot of difficulty trying to even connect to the mail server from a client computer in the local network. I installed Eudora on the client and after some tweaking in dovecot I was able to connect to the mail server, but then when I try to send an email I get a "connection refused" error, with nothing being logged on the server that I can see.
The last time I set up a mail server was Fedora Core 2, so the configuration files have changed a bit to say the least, and I can't really refer back to those to set up this new server. Does anybody know of a good step-by-step doc on getting the mail server going? I've read the man pages and other various readme's, but these really only list out the available options with no really good explanation of what needs to be done to get the mail server going. If there isn't a full write-up on how to do this, I'll put something together when I'm finished so others can use it in the future.
I have just installed CentOS 5. I have set mysql database to access from remote machines. But now the problem is it is not connecting from the local machine now.
View 5 Replies View RelatedWe have two CentOS 5 servers in production (web and database). We are setting up a single staging server that will mirror the configurations of these servers as closely as possible. What is the easiest way to ensure the exact same software and configs as the production servers are setup on the new staging server. Our contracted data center provider has already informed us that they do not perform images and NO we do not have physical access to the machines. It is undetermined whether we will be virtualizing the staging server into two virtual servers yet, so for the purposes of this post lets assume we are not. I'm seeking a faster/more precise method than doing this by eye and hand.
Some information on our web server code...
I just recently purchased a vs from a company and i am trying to set up a web site on it with kloxo and set up the mail for it upon setting up the mail settings it says:
"It is very essential that you set the my name to a properly resolvable hostname, since otherwise, many public mailservers like hotmail will reject mails from your server"
Now this is my first time setting up a vs before i have set up linux vm's to get email access but that was about a year ago.
i try to install mysql-server how do i create a password for it
yum install mysql mysql-server
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: mirror.optus.net
* updates: mirror.optus.net
[Code]...
I am using the "harddrive" option in a kickstart config to have it pick up isolinux files from a USB flash drive. I have been able to get it work by specifying the device name directly, but if I specify a LABEL or UUID, it does not work.Here is what my ks.cfg looks like.
Code:
install
text
harddrive --partition=LABEL="/install" --dir=/
lang en_US.UTF-8
[Code]...
It almost seems like the version of Anaconda in Centos5.4 does not support specifying UUID or LABELs, but I have not been able to confirm that from the Release notes.Appreciate any tips/references/documentation.
I am currently involved in setting up an openldap server on a CentOS platform. I am having some issues with getting it set up to the point that I can remotely manage the server via phpldapadmin in a web browser. I am running into an issue when starting the slapd daemon.
See the output below to better understand:
I have installed the nagios by FAN 2.0 CD. In this distro all the required softwares are bundled. Now i do not know where to start. How can i monitor my other server on the network. I have google on the internet but it is not giving the clear idea. Is there any document on the net or how to which can show that how to configure nagios with centreon or originally from changing nagios files.
View 6 Replies View Relatedi try slicehost out with CentOS5, What is the right direction to setup FTP access to my server?
View 1 Replies View Relatedon my server I have atMail and a intranet site being hosted using mySQL for the database locally, and obviously backing it up would be a good thing. I got the backup package from the list if you use the add/remove software called dump-0.4.etc.. can't seem to find much on how to use it, set it up, nothing. Granted I could be looking for the wrong thing which I'm sure is the case. As of now it's looking like a USB drive is going to be my only option, that will change in the future as this "project" goes further (we are a windows shop trying out Linux, and the next step is going to be adding another server that's a file server at that point we'll probably go to NAS for the backup and then transer that to a USB for offsite/secondary backup).
View 2 Replies View RelatedHave setup a CentOS 5.5 with IPSConfig that has been running for maybe 6 months, it was only intended to be a web server for multiple domains. Issue now is that a web developer has created a form that he is trying to email from the site, I did not have anything configured for mail and he does not care to write a script that would not require the mail service to be on the web server.
Have configured/reconfigured main.cf multiple times but no success.
Postfix appears to send the outbound email to the queue but never goes out. Have setup mail service for the domain "land***.com" in ISPConfig and tested with a single user created for the domain from the server.
What did I miss in the configuration to get "connection refused"?
Nov 2 11:27:19 WC01 postfix/cleanup[6711]: E4DFA1190011: message-id=<20101102162712.E4DFA1190011@WC01.nors***.com>
Nov 2 11:27:19 WC01 postfix/qmgr[6665]: E4DFA1190011: from=<admin@land***.com>, size=377, nrcpt=1 (queue active)
[Code].....
should I remove the domain from mail services and would postfix work on its own on a server with ISPConfig?
I am trying to build a Vehicle Tracking System in Centos 5.3 with project OpenGTS [URL]. Here a very simple guide to setup guide. But according to the guide things are not working. The components of OpenGTS:
(1) Apache Ant
(2) Apache Tomcat
(3) Java
(4) Mysql
(5) Java Mail
(6) OpenGTS
In this whole project java installation is creating problem.
I am trying to setup an OpenVPN server using CentOS 5. I ahve installed everything, configs are good, server starts fine. I have generated my certificates using the easy-rsa 2.0 included with OpenVPN. I have downloaded all the certificates to my machine and setup my client to connect. I am having that typical problem everyone seems to have where my client says certificate verify failed. However I can use openssl on the server to verify and it is ok. What am I doing wrong here?
Code:
[root@GSFOVPNxxx01 openvpn]# openssl verify -CAfile ca.crt gg-jbloomer.crt
gg-jbloomer.crt: OK
[root@GSFOVPNxxx01 openvpn]#
client output
Code:
2010-12-07 08:44:33 MANAGEMENT: CMD 'hold release'
[Code]...
I just dont get it, I have racked my brain and google until my eyes bleed and can not figure this one out.I am sure it is something simple that I am missing.
I was able to setup password-less ssh on two CentOS 5.5 servers, I don't encounter any problem on root account but when I try on another user it fails and ask for a password
This what I've done.
centostest1 = Source
centostest2 = Destination
On Source Server (centostest1)
1. ssh-keygen
2. ssh-copy-id -i id_rsa root@centostest2
ssh-copy-id -i id_rsa user@centostest2
3. Now to test
ssh root@centostest2 <--- no problem, no password needed
ssh user@centostest2 <--- problem, it asked the password for user
I am trying to setup Tomcat on CentOS 5.2,This is that ive done so far...Installed Apache, which works fine and I get the "Apache 2 Test Page powered by CentOS" Did this
yum install tomcat5 tomcat5-common-lib tomcat5-jasper tomcat5-jsp-2.0-api tomcat5-server-lib tomcat5-servlet-2.4-api