I am researching the CentOS Cluster Setup. Does anyone know of a guide on this or have a thread linked that I can look at? I want to build a small cluster and then be able to add to it as it grows. Mainly I want to have web hosts, data, and mail behind it. The DNS will probably be on there own.
View 5 RepliesI've setup my server by following a ton of goods, and it seems to work ok, but I need to start using my server for email in order to receive orders placed via my website. I've followed this guide - [URL] I followed the steps above, and tested the mail server via telnet, and all seemed to be ok. I tried sending an email via Squirrelmail, from cs@thinclientwarehouse.co.uk TO my working email simon@c1systems.co.uk, but the server returned with the following message:
<simon@c1systems.co.uk>: host mail.c1systems.co.uk[95.128.128.129] said: 550-Verification failed for <cs@localhost.thinclientwarehouse.co.uk> 550-The mail server could not deliver mail to cs@localhost.thinclientwarehouse.co.uk. The account or domain may not exist, they may be blacklisted, or missing the proper dns entries. 550 Sender verify failed (in reply to RCPT TO command)
setup a mail server using sendmail on Redhat 5/Centos 5.
View 3 Replies View RelatedWhat is the easiest way to setup an incoming and outgoing mail server on centos? Without using a control panel, such was webmin.
View 2 Replies View RelatedIs anyone can help me how to setup sendmail ( Centos 5.2 ) as mail relay for Microsoft exchange. I will put the mail relay in DMZ and Mail server in Local Network.v
View 1 Replies View RelatedI just recently purchased a vs from a company and i am trying to set up a web site on it with kloxo and set up the mail for it upon setting up the mail settings it says:
"It is very essential that you set the my name to a properly resolvable hostname, since otherwise, many public mailservers like hotmail will reject mails from your server"
Now this is my first time setting up a vs before i have set up linux vm's to get email access but that was about a year ago.
how to setup sendmail ( Centos 5.2 ) as mail relay for Microsoft exchange. I will put the mail relay in DMZ and Mail server in Local Network.
View 3 Replies View RelatedI am setting up a CentOS box as a NAT firewall that needs to also send mail. It needs to send this mail using an outside provider's SMTP. The provider requires SMTP over SSL. None of the machines inside the NAT will ever send mail except via the provider's SMTP nor will they ever receive mail except to local clients via the provider's IMAP servers.
So for the example the machine is TESTMACHINE. There is one internet facing ethernet port connected to a DSL modem via pppoe.
The SMTP it needs to send mail via is mail.host.net which requires SMTP over SSL (port 465) and username/password authentication.
The sendmail documentation is quite confusing on how to get this simple setup operating, so an example showing the appropriate changes to sendmail.mc and other require config files.
I put together a 3 PC cluster approx. 6 years ago with Redhat, at that time I was in Grad. School. Now I am in a small company and we are planning to go for a cluster setup. I have chosen to go with Centos5.
The last time around I used NFS, RSH etc. for file sharing, communication etc. Would it be OK for me to go with the same stuff or some new software/technology has come in.
The Centos cluster setup is for high-performance computing.
I am trying to build GFS2 cluster with 2 or 3 Fedora 14 nodes, but I've encountered some problems from the start. First luci does not work at all in Fedora 14. There is no luci_admin and even if I manage to start luci service, I get a blank white screen when I try to open it from the browser. I've googled a bit and found that I'd might be able to setup GFS if I manage to build cluster.conf manually and start the cluster suite, but I cannot find documentation on how to create cluster.conf anywhere. If anyone knows how to setup GFS2 without a cluster suite or how to configure cluster.conf.
View 9 Replies View RelatedI am working in a project that needs to set up an Apache Web Cluster. The cluster needs to be High-availability (HA) cluster and Load-balancing cluster. Someone mentioned the use of Red Hat Cluster Suite, but, honestly, I can't figure out how it works, I haven't been able to configure it correctly. The project currently have two nodes, but we need to support at least three nodes in the cluster.
View 5 Replies View RelatedOk I have 5 virtual hosts on one IP but only 1 domain (forwardconference.org) will be sending emails out to people....confirmations and such. The other sites may send out some emails...like back to my personal email address not hosted on this server. That works. But to people on like aol or yahoo or hotmail....it doesnt
Problem is, most people are not getting the emails. Mailq reports them being deffered for some reason. I'm having our ISP setup a PTR to forwardconference.org....does this mean all my emails from either of the sites....even if I put a different FROM: address in the php mail script...will come from [URL]? Or should I just setup my server as its own SMTP server?
I am trying to set up a Mail Server -- Virtual Users with Postfix, PostfixAdmin, Courier, Mailscanner, ClamAV On CentOS 5.5 using this guide. These are the version and softwares I have used till now:-
[Code]....
I have a HA cluster, all nodes have same network supplied by one ISP. And if the error occur with ISP the system will fail. So I want to set up HA cluster with different network (supplied by different ISP) between nodes. How can I do this?
View 5 Replies View RelatedWhats the best way to setup a cluster for HBase database system?
View 1 Replies View RelatedI would like to setup postfix to act as a relay for the outgoing mails of a couple of servers each serving it's own domain.The mails we are talking about are standard administrative emails like user registration, password reset request. The volume of those mails will naturally grow as the site grows. Which for me poses the problem that depending on the growth of the site you will sooner or later hit the quotas imposed by (my otherwise preferred) providers like GMail or smtp.com.
So what I need is a mail relay that will only accept mails from authenticated clients from hosts in its access list and relay their mail without restrictions. Is that possible with postfix? What has to be changed in the config and what are the pitfalls?
I have a Fedora 10 machine that I want to setup to send email. However I don't want it to be a full blown SMTP setup.What I am looking to achieve is when something sends email from the local machine (e.g. from cron) to an address I want it to use an MTA on the local machine which will then connect to, and authenticate with, my e-mail providers SMTP server this will then take care of actually sending the e-mail.I don't want, or need, to setup a full blown SMTP service (i.e. only the local machine should be able to use it) so sendmail seems a bit over the top for my needs. Nor do I want to mess about with MX records (am I right in thinking this will mean I have to manage all mail for my domain?).
View 2 Replies View Relatedis it possible to join Windows Server 2003 to CentOS 5 Cluster?
View 1 Replies View RelatedIf I need to append a set (or sets) of data to a file(or files) on remote hosts what is the best mechanism by which to do that? My first thought was ssh but the command syntax to append to a remote file isn't clear to me. Can anyone point me in the right direction here?
View 4 Replies View RelatedI need to setup a named server for a class room with 10 imaginary hosts the sub domain managed by this name server is s123456.eca.edu.au where 123456 is to be replaced by your student id. The named server will forward unresolved queries to the dns server.
View 1 Replies View RelatedI am running an application that requires use of my /etc/hosts file. In it, I have my machine name and its LAN ip address. The program creates a service on a specific port, then attempts to connect to it based on the host name. So my hosts file has to be correct.I added the nameservers to resolv.conf and now my application will not run. My guess is that the computer is checking the name servers first, timing out then checking the hosts file.Is there a way I can tell the system to check the hosts file first, then DNS. I thought it should behave that way by default, but it does not appear to.
View 1 Replies View RelatedI am familiar with windows 2008 cluster servers, and I just started testing with centos cluster. I am creating a simple 2-node cluster, for a simple ping test.
Node 1: 10.0.0.1
Node 2: 10.0.0.1
Virtual ip: 10.0.0.10
So far, I can ping a virtual ip, and manually relocate it between the nodes, but I didn't figure out, how to do this automatically. So this is my question: How can I setup the cluster, to it automatically failover the a service to another node case one node fails?
What I did not realize was, that DLM uses the external Ethernet Interface even when talking to the local machine/node. So iptables was blocking my DLM daemon. With iptables down or the TCP port for DLM opened, cman starts, mount works.What I have here is a fibrechannel SAN which will be directly attached to several servers in the near future. Thise servers should be enabled access to a single filesystem on the SAN (shared).I heard that the right filesystem choice for this kind of setup would be GFS, because it has a Distributed Lock Manager and one FS journal for each node.
But I am having trouble setting up GFS. I have managed to create a GFS on a small testvolume (local HDD so far), but am unable to mount it. It seems that GFS/DLM needs a lot of cluster services to run, which I do not all understand / know how to correctly setup. Also: Will the lock_dlm stuff need Ethernet communications to handle file locks? And if so, will it fetch the node list from /etc/cluster/cluster.conf to determine who to talk to?
I created a cluster with two nodes and a machine for managers with luci, if a machine reboot the cluster function by transferring the resource (IP address), if forced to stop the machine (pull the plug) the cluster does not work.
View 1 Replies View RelatedI'm having some trouble configuring clustering in a 2-node cluster, with no shared FS. Application is video streaming, so outbound traffic only...The cluster is generally ok - if I kill -9 one of the resource-applications, the failover works as expected. But it does not failover when I disconnect the power from the service owning node (simulating a hardware failure). clustat on the remaining node shows that the powered-down node has status "Offline", so it knows the node is not responding, but the remaining node does not become the owner, nor start up the cluster services/resource-applications. eth0 on each node is connected via a crossover cable for heartbeat, etc. Each eth1 connects to a switch.
[root@lmshw01 ~]# cat /etc/cluster/cluster.conf
<?xml version="1.0"?>
<cluster alias="lmshw-clust" config_version="35" name="lmshw-clust">
[code].....
I have a two node cluster, and a third system which has luci installed.
node1 is nfs0
node2 is nfs1
both nodes have identically the same configuration. They have a fresh installation of Centos 5.5 + yum update. I am unable to join nfs1 to the cluster, as it is giving me the following issue:
Sep 29 23:28:00 nfs0 ccsd[6009]: Starting ccsd 2.0.115:
Sep 29 23:28:00 nfs0 ccsd[6009]: Built: Aug 11 2010 08:25:53
Sep 29 23:28:00 nfs0 ccsd[6009]: Copyright (C) Red Hat, Inc. 2004 All rights reserved.
[code].....
I have just installed a two server cluster with ricci luci and conga on centos 5.6 32bit , both servers are vmware guests and have a shared storage disk connected to them both
with a GFS2 file system on them + fencing agents configured to work with VMware Vcenter.
(this is supported by vmware and works great on 4 other centos clusters i have been runing for 4 monthes with no CLVMD).
In this setup i used for the first time CLVMD as recommnded by RedHat so i could have the flexablitly of LVM under the GFS2 file system but , i have been getting some Strange problem with it , some times after a developer has done some IO heavy task like unziping a file or a simple TAR the load goes to 10 - 15 and no task can be killed , trying to reboot the server hangs.
After hard shutting the server every thing works ok until the next time some one does the same IO work as before.
I'm having a very strange problem with red hat cluster. After testing it in the lab, I tried to install a new cluster and received the following error: cman not started: Cannot start, cluster name is too long or other CCS error /usr/sbin/cman_tool: aisexec daemon didn't start I've checked the internet for that error, but nothing. I decided to to take the example from cluster.conf man, which looks like that :
[Code]...
And still I get the same error. I can find my servers both from DNS (FQDN and short name) and they also appear in /etc/hosts.
I'm trying to pass multiple dpmains thru one ubuntu server to various hosts on my local network.
[url] should be sent to the /var/www folder on the local host.
[url] should be forwarded to an IIS box on my local network (owa.nunya.local)
[url] should be sent to another ubunto box on my local network (smtp.biznet.net)
I have tried placing VirtualHost entries in /etc/apache2/sites-available/default and [url]and [url] both work but [url] gets forwarded to the c:inetpub folder on the IIS box.
I just wanna simulate HPC and and other kinds of clusters in VMware workstation 7.0 , in my HP 520 laptop which is dualcore and 3Gb RAM. So can u please help me out regarding this.. I am interested to work in clusters. I am new to this hpc and other clusters..please can any one gve me document on cluster installation and configuration. I would be grateful to them.. I am using Centos OS.
View 4 Replies View Related