cannot restrict share access to a single user. I've played with the security and valid users options in the smb.conf and I can get it to mount if I remove the valid users option, but this does not provide the access restriction I need. I also left it open and tried making the folder permissions rwx for backupadmin only and that didn't work. I'm using a credentials file which I include below, but I've tried manually entering them in the command too.
[root@aaphst02 /]# mount -t cifs //aapsan01/aapxen01 /mnt/aapxen01 --verbose -o credentials=/root/smbcreds
mount.cifs kernel mount options: unc=//aapsan01aapxen01,ip=10.0.1.34,user=backupadmin,ver=1,rw,credentials=/root/smbcreds,pass=********
I'm trying to set up a test system for Windows 7. I've been having trouble getting it to map drives on the domain where I work, so I wanted to set up a test system with a similar setup so I can play around with settings without mucking up our network. Only problem is I can't get it configured to even work with XP, which does work on our domain.
When I type \server in the Run box I get the explorer window showing all of the test shares I've set up. But when I try to access them, it says the network path could not be found. Here is my smb.conf file:
[global] workgroup = MAJOR netbios name = VPN realm = MAJOR.COM
i did install and configure samba buy google tutorials. I can ping the centos box from windows but cannt access folder which is on centos. I can ping the machine.
I installed Samba on CentOS, create a principal share called "public" . I want to populate this share with subfolders, and to grant access rights to specific folders for specific users. The content of "public" will be visible for all Samba users, but they will have read/write access only to the specified subfolders based on my security policy. I need the best way for doing this kind of stuff...
I can't be the first one with this problem. What am I missing?
I have setup Samba servers in the past, just none under SELinux. The last one I configured was a couple years ago, so I wouldn't doubt I'm a bit rusty.
---- Environment summary: Clean server install of CentOS 5.4 includes SELinux - lets call this 'server' - updated samba to 3.0.33-3.15.el5_4.1
Client1 - Windows XP sp4 - WINS configuration uses 'server' noted above Client2 - Windows Vista - WINS configuration uses 'server' noted above
---- What works / what doesn't ------ Clients can see the server (XP and vista) in network neighborhood. The following does not work from windows (xp or vista) net view net view \server net view \server-ip net view \servershare
This does work on the server smbclient -L \server smbclient -L \server --user validuser smbclient -L \client1 --user validuser
---- What I have configured and tried (config/output below) -------- firewall ports for samba are open SELinux enforcing or permissive file context is set on share samba booleans are set
***firewall -A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m tcp -p tcp --dport 445 -j ACCEPT -A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m udp -p udp --dport 137 -j ACCEPT -A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m udp -p udp --dport 138 -j ACCEPT -A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m tcp -p udp --dport 139 -j ACCEPT
***SELinux mode/booleans # sestatus SELinux status: enabled SELinuxfs mount: /selinux Current mode: permissive Mode from config file: enforcing Policy version: 21 Policy from config file: targeted
# getsebool -a | grep smb allow_smbd_anon_write --> off smbd_disable_trans --> on
# getsebool -a | grep samba samba_domain_controller --> on samba_enable_home_dirs --> on samba_export_all_ro --> off samba_export_all_rw --> off samba_share_fusefs --> off samba_share_nfs --> off use_samba_home_dirs --> on virt_use_samba --> off
I have a samba-share that mounts on my desktop. But how do I find it from applications? When I browse from application is not visible in the desktop folder.
PS. I find it with smb://pathway, but I don't know how I can do it from some gui-applications.
I need to access a windows share at my university's server. When I am at the university, I can access the share by nautilus (or dolphin) in a similar way to ftp:
smb://domain%5Cusername@server/share
The thing is that when I try the above anywhere else except the university, it does not connect. I guess it has something to do with the domain, but I am not sure.
My work uses an internal software suite where the data is hosted with a linux server. It uses mysql and samba shares. We are currently opening a new location and need to be able to access the samba shares. We are able to access the mysql databases. The samba shares are used to store various files for the software such as updates, invoices (as pdf files), etc. I've setup vpn connections using windows servers in the past but I can't, for the life of me, get a VPN server setup on our linux server that windows will connect to. I've tried openvpn and pptp. I'd prefer to use the built in windows client to connect.
I am trying to properly mount a samba share in order to access it from a terminal and run a script that I've written over a folder in the share. How could I do that? I tried smbclient but after successfully logging in I couldn't issue the sh command. Isn't it possible to have it mounted in the /mnt folder like a normal filesystem?
I've used Samba for several years and when it works it's great. Unfortunately from time to time it seems to get messed up and either all the 7 machines on my home network can't be seen or I can't access the shares on some. I have 2 Windows XP computers 4 Kubuntu and one Linux Mint KDE, all the latest versions. I'd rather not plough through all the documentation for Samba, but would really like a "model" smb.conf with a few comments about parts that might have legitimate variants. I have researched this with Google searches many times but have failed to find the information I need in concise form.
I have a fedora 10 box with two network card on eth0 I have a pppoe connection to the internet, on second card eth1 I share my internet connection end I set up a samba server but I don't know if the settings are good. How to do this settings right to work fine, the ip are assigned by dhcp I don't use any static ip .When I try to browse the internet from the other computers some site's like {.com ; .org ; .info} are block, other site from {.ro} are working. Someone tell me something about turn off all my filters, but I don't know where to find this filter to turn it off. And when I use samba I can't have and internet access or vice versa. My network look like that:
I have ubunto desktop 10.04 LTS I installed samba and able to access the share on windows machines. However i want to access the share on 300 windows machine(for example) systems at a time Is it possible.
I am trying to mount a file server directory on a client machine. I tried using NFS, but could not mount the share on the client. Several respobses were given to a post on this problem. but I still was not able mount the NFS share. I decided to try instead to mount the directory as a Samba share because I can already access it using Samba from windows, or from KDE or Gnome using smb://fileserver as a desktop location icon URL. When I try to mount the Samba share I get error messages that nearly identical those that occurred with NFS. . Here are some of the setup parameters
CentOS 5.4 on client and server behind a D-Link router server IP: 192.168.0.44 (can ping it client) client IP: 192.168.0.101 (can ping from server)
[code]....
This is the only error message that these commands have produced in the messages log, secure log or smbd log for either machine. My immediate goal is to set up the simplest possible local mount that will allow Grsync to backup to the file server.
I have set up a Samba share via my CentOS 5 server (the samba share is actually a mounted filesystem, not local machine space). I have been successful in adding permissions for my windows users within the smb.conf, but have an additional need that I cannot figure out. I would like for my Windows administrators to be able to create folders and assign permissions from their machines (and their Windows GUI). Ultimately I need the folders on the Samba share to behave correctly when Windows group permissions are applied by these administrators.
When the folders are created, the "Everyone" identity cannot be deleted and sometimes "Creator Owner" or "Creater Group" show up. I have seen several threads start down this path, but haven't seen a definite answer (I may have just missed it!).
The file permissions on the folder are RW for user,group and world.(umask=0000) My main problem is with SELinux, I've tried to audit2allow and that seemed to work, all I had to do then was chcon the directory and files to type samba_share_t but the tool fails with Operation Not Supported. Am I to assume you simply cannot share files from a mounted ntfs drive under SELinux? Because I've just spent 2 hours trying and I've just about ready to just give up and just go back to windows when I need to share those folders. There's no way i can copy the folder contents to my Linux partition, far too big for that. Has anyone EVER been able to do this? Do I have to disable SELinux to do it?
I have Linux installed on one machine with samba running and a second machine running XP. They are going through my router and I am using the same username/passwords for both machines and I have even gone to the point of allowing access to everyone for the share I created and the worgroup in samba is MSHOME just like my XP machine. When I view (or search) my workgroup computers my Linux machine shows up and so do the shares I created but when I try to open them I just get a message that permission is denied and I may not have permission to use this resource. I even tried setting access to the shared folder to 777 but still I can't open this share. Has anyone got any idea of why this is?
I have been having off and on issues with my samba file shares. I am sharing a NTFS formated hard drive where the mount point is in my home directory, as well as a printer connected via USB. I am to the point where printing works (using it as an ipp print share, samba is configured for it, but I don't know if it works or not), and I can access the shared folder from Windows, but I can't access the shared folder from any Ubuntu machine. I get the error:
This is my first post. I am not all that new to Linux. I have done lots of reading on the OS but always felt a little timid when it came to trying out stuff.Here is my problem I have a stand alone samba server I am trying to setup to share all my digital photos and other doc. I can see the share from other machines. On the windows machines you can see the users home directory and the share itself in an folder icon. Whenever I try to access the share it asks for a passwd. I enter the passwd and the share folder is visible when I click on the folder I get and error message.
I installed samba server on fedora13 last week and share some files from samba server GUI. I also created samba user and password for shared folders but I can't get access samba share folder from neither fedora machine nor Windows XP. When I open samba share from other fedora such as smb://192.168.10.2. I can see share file and when I browse folder, password required box is appeared but after I put samba username and password. The Error message is Unable to mount location Failed to mount Windows share. Even when I browsed samba share from windows xp.
Error message is \192.168.10.2smbshare is not accessible. You might not persioon to use this network resource. Contact the administrator. The network path was not found. How can I get access samba share from both fedora and XP that is what I installed on server:
I'm relatively new to liunx and I have recently installed Fedora 9 to act as a media server. I thought everything was going well until I tried to connect to my Samba share but could not.Not sure what the netbios is but I believe this can be anything I want?So as far as I can tell, the laptop can see the Samba Share, Fedora can see it's own Samba share but nothing (both laptops XP and Vista or the Media Player) can connect to the /public folder..I don't login to either Laptop with a user account, so I believe I do not have to create a user.
i want to do a script that check samba shares with command smbstatus and see if one of the folders is accessed by unauthorized user by comparing with list of authorized users.
I have Samba shares on a Red Hat server vmware virtual machine. We just upgraded our vmware tools and vmware hardware to vsphere and now I can't authenticate to the samba shares. It prompts for credentials, but it won't take the login. Has anyone seen this or have any idea how to fix this?
How come I can access samba share, and windows workgroup computer and don't have any samba package installed? Sudo aptitude show smbclient says not installed. Sudo aptitude show samba says not installed.
I have a samba server on my LAN. It can be accessed without any problems from Windows machines on the LAN without password. I have two computers that I have updated to OpenSuse 11.2 (both used to run 10.3). Since doing this upgrade I can no longer access the samba share from the Suse machines. Basically, both Dolphin and Konqueror ask for a username and password to access "avoca" (the workgroup).
I have configure few folders access by 3 users, In common folder only users that create that document can do changes. The rest of the users can only read the file but can not do changes. Ownership of the folder is admin, group is sambashare which already have the access create and delete files. All the 3 users already in sambashare main group, and they only can edit the file that they copy or create to the common folder .........
why cant I access samba share by short-hostname from win7.when I ping short-hostname, the answer is the actual ip and short-hostname.mydomain.com pinging short-hostname does work, but accessing it from start-run does not! accessing by ip or short-hostname.mydomain.com works fine.ssh by short-hostname from win7 works fine too.
I am using samba t share my files.I am sharing /media/MEDIA folder. it is a ntfs partition mounted with ntfs-3g with write/read access from linux.I can see and browse my shares and also create files in the root of this partition, ie /media/MEDIA, but in its subfolders i do not have write permissions.
another interesting thing is that i have permission to create directory and delete files everywhere and in any folder, subfolder but when trying to create files i get not enough free disk space error.by the way i dont know if this config file is correct, i find as template in internet.
