CentOS 5 Server :: Apache Hanging On Forum Reply Posts?
Apr 1, 2010
I recently moved my site to a new server (Apache 2, PHP5, MySQL5). The site is an Invision based forum. Every few posts / topics it just hangs. The data has been written because if you stop and reload, the post / thread is there. I thought it was a write issue initially, but nope. So, the data is written but the page load never completes. It doesn't leave the page where the data has been input.
Whats the best way to trouble shoot this issue? The only thing I have done recently is reduce my MySQL timeouts, but I can't see that being an issue as the values are still big enough and there are no mentions of timeouts in the MySQL log. (For the record there is nothing in PHP's error log either)
I have checked my server-status. It all looked ok, but I have a suspicion I was hitting my ServerLimit, so I doubled that. Also enabled my Keepalives. Will keep an eye on it.
Some additional info;
1. Apache is throwing seg faults, but enabling core dumps does not produce them.
2. I have tried disabling the modules in apache but it just stops things from working.
3. I fear it may actually be DNS related. If I watch Live Headers in Firefox, absolutely nothing happens during this 'hanging' period. After that, the responses come back fairly promptly.
View 7 Replies
ADVERTISEMENT
May 16, 2011
I posted a topic in another section and tried to reply. The message pane opens and the cursor is there, but when I start typing the cursor stays put and nothing shows up.What to do? I am doing this reply from Windows right now.
View 3 Replies
View Related
May 12, 2011
Dont know how to explain this properly but in some forums on the net, no matter what text colour i change its always very light in colour. How can I change this so that the text is black as in when typing here for eg? its not the actual setting of the forum as I have looked through it thoroughly.
View 1 Replies
View Related
May 5, 2010
When i enter ip or address nslookup does not reply any answer. It shows no server found. "servfail". This is my named.conf file:
[Code]....
View 3 Replies
View Related
Sep 5, 2010
trying to configure a Centos 5.5 server (simple file server with DHCP and DNS relay). I configured and tested the config (by 'service dnsmasq configtest') of dnsmasq and I got the message 'dnsdomain:host unknown (translation of the real message : hte inconnu) and I didn't find where I could define this host ! The hostname of the server is well defined and I can see it from all Windows PC's on the LAN. dnsmasq starts (with hte same message as in configtest) but when querying DNS from PC's te.g. trying to surf the Internet), I don't get replies (3 DNS servers are also well defined and operational).
View 2 Replies
View Related
May 11, 2009
I am new in linux,I installed apache-tomcat on fedora.I can view all web pages on localhost:8080 but when I try to view them by server's url address from another computer, I don't get respond.Can it be a firewall problem or something else?
View 4 Replies
View Related
Feb 1, 2010
Our mail server keeps on hanging after a while. This happened after there was a breakdown in electricity supply and the server room air conditioners stopped working for almost half a day. We are not sure whether this is a server hardware problem or a coincidence with a break-in attempt or malware activity.
Following are the message from the server log code...
View 14 Replies
View Related
Feb 3, 2011
I've got a server running CentOS 5.5. I used the automated iptables config tool included in the operating system to allow traffic for vsftpd, Apache and UnrealIRCd. When I send large files to FTP, even from the local network, it works fine for a while and then completely times out... on everything. IRC disconnects, FTP can't find it and when I try to ping it I get "Reply from 10.1.10.134: Destination host unreachable" where ..134 is the host address for the Win7 box I'm pinging from. This is especially frustrating as it's a headless server, and as I can't SSH into it to reboot I'm forced to resort to the reset switch on the front, which I really don't like doing.
Edit: the timeouts are global, across all machines both on the local network and users connecting in from outside.
View 4 Replies
View Related
Oct 14, 2010
I am trying to solve a problem where Apache stats aren't displaying correctly in Munin. I've ran through quite a bit of checks and tests regarding Munin setup, but I think my issue is related to Apache, but my skill set there is lacking.
first, system info:
monitored server:
CentOS 5.3 2.6.18-128.1.1.el5
[code]....
View 7 Replies
View Related
Jan 20, 2011
I am installing Big Brother on a CentOS 5.2 running the default Apache 2.2.3. When I try to access any web page I get the following error: Forbidden You don't have permission to access /bb/ on this server. Apache/2.2.3 (CentOS) Server at fmsubbnix Port 80 So far I have:
1) Set the Directory options to FollowSymLinks
2) Verified all directory and file permissions are at 755
3) Set permissions temporarily to 777 and received same error so I am assuming the issue is in a config file somewhere
4) in hhtpd.conf verified <Files ~ "^.ht"> is correct
5) verified the "default" directory is correct (/var/www/html)
I have read and tried several ideas in posts listed on the web but to no avail and am at a loss as to what to look for next..
View 3 Replies
View Related
Jan 1, 2011
I'm actually running Centos but I don't see a Centos forum yum stanza/url for the source repository please?
View 3 Replies
View Related
Sep 5, 2010
Good forum server(application) for Centos5(Linux) Server
View 3 Replies
View Related
Jul 22, 2011
I am running a CentOS 5.6 Server with a website and Forum. The website has a contact form and users can email various people in the organization. I have setup sendmail to send any mails like this to my email address on a Windows machine.The problem is that there emails don't have a header which has the senders original email header. It comes from localhost on my sendmail. How can I get any mail generated from the apache site to ALSO send mail to root on the Centos Server? That way I should be able to see the header and report the spammer or block them.
View 2 Replies
View Related
Jul 15, 2009
I am having a problem during a fresh install of CentOS 5.3 on an IBM Intellistation Z Pro 6221. I have tested the installation media (CDs). The install runs normally until I am asked to specify the appropriate keyboard.I take the default (English) and hit next. The keyboard and mouse keys become unresponsive though the mouse pointer moves. I can go no further than this. This behavior is the same whether I install in text mode or graphic mode. I have tried the noprobe installation option without success. The box I am doing the install on dual boots fine between Windows XP and CentOS 4.7 currently.Does anyone have an idea of what the problem may be?
View 2 Replies
View Related
Jun 25, 2009
I run an centos server. From the console I can ping google.com and get a reply. But when I ping another address say xyz.com, the IP address is resolved (11.22.33.44) but there is no reply. In the same network in our office from my desktop I ping [URL] and there is a reply.I turned of the firewall but still the same problem.
View 9 Replies
View Related
Dec 2, 2010
anyone can explain me why whois sometime does not reply for some ip only ?
View 4 Replies
View Related
Nov 5, 2010
I've been allowed to work on the server of a forum. I was given the username and password, and with them logged in successfully on the server using PuTTY, but now I'm not sure what command I use to do anything to the users on the forum For example how would I change someone's username or password, etc.
View 3 Replies
View Related
Jul 30, 2011
I have a web server with the specs below and my apache server is being a hog using all my RAM 7gigs or 8gigs of ram. When there is a rush of traffic at once my whole server crashes and I have to reboot apache. The way my site is set up I have a tube script and I use the tube script to host videos on my forum I have 1000 videos on the tube script. I brought a bigger server and more ram because of the down time I been having . I am really trying to figure out why its crashing and using so much ram. I installed eAccelerator didn't seem to help with the apache server.
Intel Quad Core Xeon X3430 (4 x 2.40 GHz, 8MB Cache)
> 2-bay Supermicro Chassis and Motherboard
> 8 GB REG ECC DDR3 (twice your current setup)
> 250 GB Enterprise Grade SATA II
> 10 TB Bandwidth 1gig Uplink Port
> CentOS 64 Bit (Latest Stable)
TOP Command and free -m command screenshots are attached this is with only 160 people online at once
View 6 Replies
View Related
Mar 28, 2010
I saw many people were talking about how to optimize apache and mysql here and also in other forums and blogs. I am currently hosting some sites and some IRCD processes (a tiny network)in a dedicated server with spec:
Quote:
Intel Dual Core 1.6GHz E1200
1GB RAM
160 HDD
10Mbits port
We got about 30,000 to 40,000 page views per day. I would like to ask people here about the opinion of apache and mysql optimization based on this server spec and current number of page view.
View 4 Replies
View Related
Apr 29, 2010
I have Centos 5.4 installed on my server. Everything works perfect, however sometimes apache does not work properly. When I write my domain to browser it tries to reach the site, however it can't get any result. (There is no "browser couldn't find" error). The browser just tries to get the content.
When I login to my server with ssh using my domain name, there is no problem. (Named works.) When I give the "service httpd restart" command the problem disappears.I looked at httpd log files but there wasn't any problem at that time.I use the API's of the Facebook and Twitter, so there are many Curl requests are made with PHP. Could that be the reason?
View 2 Replies
View Related
Sep 23, 2010
I'M trying to configure SVN in CentOS 5 without Apache, the connection should be possible with some SVNClient like tortoisesvn or another.
Following this guide i proceeded:
yum install subversion
useradd -d /home/svnroot -c subversion svn
passwd svn
svnadmin create /home/svnroot/proyecto_1
pico /etc/csf/csf.conf (enabled ports and restart with csf -r)
[Code].....
how to connect to the repository from my PC?
I don't know how to do it
I understand that this svn are running with svnserve but i don't know the way to connect from my PC with a svnclient, like rapidsvn or another.
View 2 Replies
View Related
Dec 24, 2010
I need to do this to pass PCI compliance tests, I know it's not necessarily the best thing to do but it has to be done.
How would I go about compiling this version as it's not on the official repo?
View 4 Replies
View Related
Apr 16, 2011
I have installed apache 2.2 from source and it works prefectly.
I compiled and installed php 5.2 but php pages resolve to page not found.
I checked the logs but did not find anything also apache has loaded the php5 module successfully.
Below is the apache configuration
[URL]
View 3 Replies
View Related
May 6, 2010
i have a mail server that uses Postfix as a mail server, it runs ok, but i need to add some features to a specific users only.what i need to add is Auto-reply message for some users only.
View 5 Replies
View Related
Dec 28, 2010
operating system: CentOS 5.5 git version:1.7.3.4 ldap server:OpenLdap Http server:Apache 2.2 the software above have been installed. How to config /etc/httpd/conf.d/gitweb.conf file to let git authed by ldap?
View 2 Replies
View Related
Feb 3, 2009
I updated my CentOS 5 box recently. But after then my Apache can no longer work; every time I try to start apache, it says started OK but then dies immediately and no error message at all. When I tried 'apachectl restartI', it says apache not running. It has been running fine before the update. I've looked at /var/log/httpd.log but there is not any message about my problem.
View 14 Replies
View Related
Feb 5, 2009
I've installed Apache Tomcat--6 and even jdk1.6.I've even created a tomcat.sh file to start the serverautomatically and it includes the Environment variables also ($CATALINA_HOME & JAVA_HOME) for automatic startup.Next when i'm using http://localhost:8080 to call the server it shows unable to connect.I've tried changing the port no of tomcat in server.xml file. but still its not working.
-->Then i tried using--telnet localhost comand--it shows Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
telnet: Unable to connect to remote host: Connection refused
Here I'[m stuck i don't understand how do i make the localhost work.
-->If I'm giving telnet localhost 25 the sendmail server is working.But the 80 and 8080 ports are not getting configured.
-->I've tried adding the port and its name in /etc/services file but still its not working.
-->When I'm giving the command--/sbin/chkconfig --list--->Its shows: xinetd based services:
...
...
telnet on.what should i do to get my tomcat server work properly.
View 2 Replies
View Related
Apr 21, 2009
We have Apache installed on CentOS 5.3 in our laboratory. Indeed the server is running fine for almost two years since it is actually the first CentOS 5 that was released just regularly updated. Now, most of our applications are custom made PHP applications and until now we somehow managed to avoid using PHP to fetch files that are on the internet itself. But now we are desperate because we need to allow PHP to fetch files through Apache but it seems as if Apache is not allowed to make a connection to the outer world. Additionally we use a proxy server to connect to the outer world so right at the beginning http_proxy is used to set that environmental variable. And for the root user it all works fine after that but it seems as if the apache user is not allowed to access the internet. Just to make a remark our web server can be accessed from the outer world so its a one way street for now.
View 1 Replies
View Related
May 25, 2009
I run mysqld on another server. I just switched to another dedicated server now, and i'm having trouble connecting to the mysqld server. If i run the php script from the bash console( php connect.php ) it works perfectly and connects to the mysqld server. However, if i run the script from apache ( http://localhost/connect.php ) it returns this: Can't connect to MySQL server on '(mysqld real ip)' (13) Mysql connection from another server(old httpd server) works perfectly, so it's not from the database server.
View 4 Replies
View Related
Aug 23, 2009
I'v multi v-host . need to make each V-Host work under separate user (not apache user).
There is one module/patch call " mpm-itk " . In Debian/Ubuntu every thing is sweet
just do
apt-get install apache2-mpm-prefork libapache2-mod-php5 or aptitude install apache2-mpm-itk
that is all
But in CentOS 5.3 , there is always some difficult different (Why ? I do not know)
Kindly, Look to this solutions : [URL]
Is there possibility to avoid this complications ?
- I need solution without compiling + patching the apache , Is this possible ?
View 1 Replies
View Related
