I am trying to play with /etc/pam.d/samba on Centos 5.6 (2.6.18-238.19.1.el5) but it seems that Samba is ignoring this file.
Example:
And samba authentication is still possible afterwards.
Default samba packages:
The package seems to be compiled with PAM enabled:
I have the following version of centos,kerbose and samba (Samba version 3.0.33-3.29.el5_5.1, krb5-libs-1.6.1-36.el5_5.5 , krb5-workstation-1.6.1-36.el5_5.5 , centos-release-5-5.el5.centos) i have configured it and qhw i givit give me the following error Failed to set password for machine account NT_STATUS_ACCESS_DENIED) Failed to join domain: Access denied
[Code]...
I have Windows 2008R2 Server acting as Domain Controller for Windows7/XP clients. and CentOS 5.3 Installed configured as Samba Server, I want to make it as ADS member server so any user to login to any machine, and be able to access their Samba share.
View 3 Replies View RelatedOn this moment i configure a testenvironment with 1 Microsoft active directory server and 1 Opensuse 11 samba filesharing server. But i have a issue. The samba server is add to the domain and the servers can communicate with eachother. I can login to the domain on the samba server and the LDAP settings tab on yast2 samba configuration tool tell me that samba and the MS LDAP server can communicate with eachother. I can see the shares on the samba server but i can't autenticate myself. When i whant to logon than see i always "domain: domainname.local" and "access denied". My question is now how can i give the MS administrator account rights to view the shares and configure the rights for the other users.Samba config file
PHP Code:
[global]
workgroup = WIN-FVJBNQIJE9O@WOENSDRECHT.LOCAL
[code]....
I changed the password on my samba server and now I cannot mount the share anymore from my Windows 7 box. The logs shows no errors whatsoever about authentication, is that normal? I remember from a long time ago that I never saw samba do that and it has made troubleshooting very difficult.
I changed the password with the smbpasswd wanuser command the samba version is 3.2.5
here my samba.cfg file
[global]
server string = asdfadf
log file = /var/log/samba/%m
panic action = /usr/share/samba/panic-action %d
[Code].....
When I crank up the log level, samba shows lots and lots of totally irrelevant messages like connected and disconnected, but not why it got disconnected. On the Windows 7 machine, I get an error that the user and password is not correct. Why does Samba not report it?
I have a Debian 5.0 system, fresh install, updated with aptitude. Now i'm using vmware to test my system, but the 'real' system, is a small network with around 30 workstations connected in a cisco switch + router. So i test the configuration at home, and when it's working and done, i will copy it to the real network, because i don't want to mess it up
So i installed the newest samba to act as a PDC. You can read my configuration in the following lines:
Global Settings
Share Definitions
I added root with 'smbpasswd -a root' command. When I try to connect to the domain with a Windows XP, it says: ' The username cannot be found '
I h ave a samba server which authenticate with MS AD, and this is working fine with XP and etc. But recently we have bought some pc's with Windows7 and when I try to access this share through Windos7
I am getting this error:
Is there any special thing that I need to do on client (windows7) side or server side for this to work?
My systems details:
OS - Red Hat Enterprise Linux Server release 5 (Tikanga)
Kernel - Linux server 2.6.18-8.el5 #1 SMP Fri Jan 26 14:15:21 EST 2007 i686 i686 i386 GNU/Linux
Samba - samba-3.0.23c-2
I have a samba server for company file shares but we do not use domain services or active directory service. Each workstation is its own standalone system. (And we want to keep it this way.) I would like to have some centralized authentication though, and it looks like Kerberos will provide that. After a lot of searching though, I can't find any instructions for setting up samba to authenticate users using kerberos without an ADS (active directory service) or domain. Is this possible?
View 1 Replies View RelatedInstall and configure Samba as a primary domain controller with LDAP on Linux.i setup it step by step following article without error until step 10.i want to join windows client when press user name and password for domain then display message:The following error occurred attempting to join the domain BIGTIME:
The network path was not found.
I've been trying to set up my printer that I'm sharing through a desktop running Windows 7 and am having trouble getting the authentication details to stay saved, or even work, for that matter.
No matter whether or not I tell the New Printer program to remember my authentication details, it doesn't. If I tell it to prompt me if it needs details, I get no prompt. So, in order for me to print a document, I have to tell it to print, then go into the print queue and authenticate it from there.
1. IIs there a way, either manually or through GUI, to either save my authentication details or just have it prompt me upon printing to save me from going into the print queue?
2. This isn't exactly on-topic, but it came up while I tried to set up the printer. Has anyone else had their SMB URI come up incorrectly with the spaces incorrectly rendered as "20" instead of "%20:?
A time ago I've been trying to implement a PDC linux server with Samba and Openldap for centralized authentication for windows and linux clients, but I can NOT get it. So I read somewhere that there is another option called Directory Server and maybe that is possible to do. According to your experience do you recommend any 'how to' or 'tutorial' that will permit implement a PDC server for authenticating and sharing files and printers for windows and linux clients?
View 2 Replies View RelatedI am able to see my samba shares on a windows xp machine, but the username/password combination fails.I setup samba with YaST.firewall is disabled.
View 7 Replies View RelatedOur system setup: windows server domain controller 2008 We are installed sambain Ubuntu 11.04, with ads authentication using winbind,i can able to give the access restriction from Linux for windows ADS User for linux samba share folderall are working fine from Linux,i want give the access fro domain user from MS -windows , what is the file permission owner ,etc, any one try this concept please give me a any document any example
View 1 Replies View RelatedI added my linux server to a windows AD using winbind / samba. Everything worked just fine. After changing the OS to Debian lenny x64 I get a "segmentation fault" when trying to change user passwords. I am using the exact same configuration, on my 32 bit Server everything works.
debian:~# passwd <user>
sgmentation fault
tail /var/log/syslog:
kernel: [689689.005934] passwd[11209]: segfault at 0 ip b7b84418 sp bfc37fc0 error 4 in pam_winbind.so[b7b7e000+b000]
Debian Lenny 5.0
[Code].....
I've been working for hours with Samba on Ubuntu Server 9.10 (Samba version 3.4.0), trying to get it setup simply as a fileserver that performs authentication to an NT 4 server (yes, I know, old and out of date). After much struggling, I finally realized that my configuration *was* working when the clients connecting (from XP, and Win2k clients, mostly) were actually joined to the domain (where the PDC is the NT 4 Server) and logged into the domain.For various reasons, many of the Windows clients at this location don't actually log into the domain, even though they have login/passwords that are valid users on the domain and they'll typically have some drives mapped to the PDC.
By the way, I have this working on another Linux box running Samba 3.0.28, so I'm sure it's possible, I'm just lost as to how to do it.I can provide plenty more information if it would help diagnose the situation. Does anyone have an idea of how I can get this to work? I'm sure it's possible, since the exact scenario worked in a recent version of Samba.
Making a Samba Server with LDAP authentication. Will post as I go along. Found these sources, anything/hiccups I should know before jumping in? Figure would follow the official documentation then check the others for comparative errors.
https://help.ubuntu.com/10.04/server...ap-server.html
https://help.ubuntu.com/10.04/server...amba-ldap.html
http://tuxnetworks.blogspot.com/2010...cid-short.html
Also Do other computers that want access to server also need samba installed (or just client)?
The server is 10.04 and my proposed client is 10.10, does this create problems?
Do I need to use ACL? I see them only in certain places.
Using xfce after Ubuntu install, not sure if this matters.
I have installed Samba 1.2.63-0Ubuntu4 (system-config-samba) on Ubuntu 10.04, and it has been working without any issues for a few months now, but now the username/password authentication does not work anymore and I can't figure out why
I have tried changing username/password(thinking maybe i forgot the correct credentials) and the new username/pass does not work either.
I have also tried "sudo service smbd restart" in terminal to restart samba but this does not work either
I can still see visible shares when browsing server via "network neighborhood" on XP,,, and can access the shares that do NOT require authentication
username/password are made up of standard characters as well
I have been able to accomplish my goal of creating an AD-like authentication using LDAP,SAMBA and LAM. From what I have seen you can have this type of setup but it doesn't allow the passing of group policies to the desktops of the users.
View 2 Replies View RelatedSo far I've been able to get Samba to connect to the my WORKGROUP and I can see my Vista PC as well as my 3 hdd's but when I try and open the folder, any folder, C$; D$; or E$ I'm confronted with a user name and
password prompt. No user name or password combination that's associated with either machine, openSUSE or Vista will grant me access. Why am I seeing this prompt and what I would really like to know is can it be
disabled all together? Otherwise, what user name and password does Suse want? Do I need to tell Suse in a terminal a user name and password?
I maintain a samba PDC for a small business, our current setup does not work very well; on a hardware upgrade I directled imported the old ldap database and attempting to add machines to the domain causes all sorts of trouble.
I'm 95% sure the original database (which predates my employment) was created using the idealx smb-ldap tools, unfortunately on our current platform (debian lenny) these tools seem to be broken; the only things hey seem to do reliably are set passwords and add posix users, asking them to do anything involving samba/windows causes errors. The idealx tools seem to be abandoned, and I don't know enough perl to try and fix them.
Since the idealx scripts seem to be abandoned, and most of the good samba+ldap how-tos references the idealx tools, I was wondering what people use nowadays to manage there ldap directories; surely they aren't importing .ldif files to add new users/machines like I've been doing. Are people just writing thier own management scripts/web-apps? Or are the smb=ldap tools just broke on debian?how to generate the NT/LM password hashes and proper SIDs, does anybody have anything they could point me to about this?
I've been searching around the web for help and have been really pulling my hair on this one. I have a Windows 2003 Server w/ AD on it. I have two linux machine, both running the same version of RHEL 5 (compute-1, compute-4)
When I log into compute-1, and do an "id dhuynh", I get this:
uid=1501(dhuynh) gid=1500(domain users) groups=1500(domain users),2013(dusers),1501(certsvc_dcom_access),1507 (BUILTIN+users)
When I log into compute-4, do do the same command, I get this:
uid=1500(dhuynh) gid=1504(domain users) groups=1504(domain users),1505(certsvc_dcom_access),1501(BUILTIN+user s)
Notice that the uid and gid are different. How do I get them to be the same? This is affective the file permissions in certain shared directories. I've check /etc/samba/smb.conf and they are identical. I also check /etc/nsswitch.conf and they are identical too.
how to make a new Ubuntu 9.10 box use our LDAP/Samba server for user authentication. Our Red Hat and Windows machines all use it just fine. I've been trying to use the auth-client-config and libnss-ldap packages for this purpose, but I must be missing something. I'm pretty green with LDAP, so this is my first time diving in... Is there a good How-To or step-by-step read on this? All of my searches lead me to setting up Ubuntu as the server, and that isn't what I want. I've also tried the steps listed in [URL] for the LDAP Authentication section.
View 1 Replies View RelatedI have to rename a group of machines in my little samba domain (tbd backend) but there is an ugly bug that makes this impossible. have set 'rename user script' variable corectly, also checked all configurations.When i change computer name in my windows box, it shows an error saying something like "Error calling remote procedure"Looking on server side, username for the machine gets correctly changed in /usr/passwd, and also in samba database.But samba log says:
===============================================================
[2009/10/08 11:10:32, 0] lib/fault.c:fault_report(42)
INTERNAL ERROR: Signal 11 in pid 11052 (3.0.33-3.7.el5_3.1)
[code]....
I had installed Centos 5.4 , then upgraded to 5.5 hoping that new version has samba 3.5.x. However the updated Centos 64-bit 5.5 also has Samba 3.0.33-3.28.el5.
How can I update samba at least to Samba 3.0.37 ? The reason is, there seems to be security concerns on samba website, and I wish, at least update to latest 3.0.x .
I am not able to connect samba server from other linux pc giving error: NT Authentication Failure
But am able to access through anonymous login from linux Same is working fine will all smb users through windows. I am using rhel 5.
I've been running a Samba server under RedHat 8 for five years without a hiccup. I want to cut over to a F10 box but cannot get shares accessible. smbclient attempts fail over NT password error. SELinux is disabled. Server is visible on the network. Users require no password access to shared data.
smb.conf follows:
# Samba config file created using SWAT
# from UNKNOWN (>)
# Date: 2009/06/12 14:15:15
[code]....
I've installed CentOS 5.3 on a machine, and I need a Samba version 3.2 or higher. Since 3.4 is out, I thought I'd grab that. But, "yum list|grep samba" gives me only version 3.0.33. Is there a package of Samba I can grab that will upgrade the 3.0 installation so that I don't have two laying around? If not and I need to compile from source, do you have any suggestions for what arguments I should give configure? I'm not used to Linux coming from the BSD world
View 1 Replies View RelatedI'm wasting hours on this problem: I'm setting up an always-connectable VNC server loaded via xorg.conf.
This is what I did: yum install vnc-server
How can the linux boxes authenticate from Windows Active Directory ? The Apache should also authenticate from Windows Active Directory ?
View 3 Replies View RelatedI've configured kerberos authentication on my centos 5.2 box. When I kinit with a username in AD and not on the centos box, I get a TGT. However, I cannot log into the centos box as any of the AD users. This is probably a stupid question but do I also need to create the account's on the centos box that I have in AD? If so, does that mean i can then use pam to authenticate users on my cyrus imap process running on the centos box?
View 2 Replies View Related