I just installed the snmp packages on Centos 5.2, and when i tried to use the snmpwalk command, the data is not showing and i got this error: No more variables left in this MIB View (It is past the end of the MIB tree).
View 1 RepliesI just installed the snmp packages on Centos 5.2, and when i tried to use the snmpwalk command, the data is not showing and i got this error: No more variables left in this MIB View (It is past the end of the MIB tree).
View 5 Replies View RelatedWhen I open Nautilus v2.16.2 in CentOS 5.4 then I miss at the left side a tree view of the whole directory tree.
Only a list of all files in the current directory is visible.
How can I enable/show ?
I'm trying to configure SNMP service to send traps to SNMP server. I've installed net-snmp-utils, now I need to configure the "snmpd.conf" file...
View 2 Replies View RelatedSo I've been trying to get my windows C: and D: partitions (mounted to /windows/C and /windows/D respectively) to show along side "Filesystem" and "Home Folder" in tree view on the left panel in Nautilus.
I know I can drag and drop any folder under the Places view mode, but I never use Places and prefer Tree view mode.
In the left pane of Nautilus File Browser, I can only display directory and file names. I don't have the button at the top of the pane which allows me to select an alternate view such as Tree view.
View 6 Replies View RelatedI am trying to monitor a Centos 5.3 box using SNMP and I am having a lot of trouble getting the data that i need from it. Everytime I try to get information from the UCD-SNMP MIB it returns "End of MIB". It is my understanding that UCD-SNMP is a standard package when Net-SNMP is installed and should always be there. Then why can't I access it? I have tried removing the reinstalling Net-SNMP, but that hasn't worked. My server is update date on all it's patches as well. It is quite old hardware, but I don't believe that should affect SNMP from being gathered. Iptables is down, and I cant' even get it from the local machine.
View 1 Replies View RelatedI have a box that I installed Elastix on as I'm trying my hand at Voip and Linux. I'm basically very green when it comes to Linux and the console. As I was following a guide @ engineertim.com to securing the box, it asked me to: wget [URL], But I get: Resolving engineertim.com... failed: Temporary failure in name resolution. I searched around and tried configuring resolv.conf to no resolve - :) unintended pun
I changed /etc/sysconfig/network to include GATEWAY=192.168.1.1 From the internet I have a modem-192.168.2.1, a telecom voip box-192.168.15.1, and then my router 192.168.1.1 I'm able to ping machines attached to the router but nothing beyond that. I tried to get the results for ifconfig via putty on this machine but it says command not found. I can get it when I log in at the box in question though.
if am using --log-prefix "BANDWIDTH_OUT:" --log-level 7 to capture packets, I think is there a way to view these?
View 4 Replies View RelatedI have a straingh problem with kill. I start a skript run.sh. With Ubuntu i can kill run.sh and the whole pstree is killed. with centos it does not work?
[Code]....
why does centos do not kill the wohle tree? is there someting with the bash? ubuntu use 4x and centos 3.2
In a nutshell, my situation is that I need snmpgetnext. My understanding is that this should be installed with net-snmp (net-snmp.x86_64 specifically); this is not occuring. I cannot use it as a command, and I have tried quite a few searches (whereis, find / -iname "snmpgetnext", "snmpget*" | grep next, "*next*" | grep snmp, and a host of similar oddities). Can I find snmpgetnext in a yum repository, preferably an official one?
More specifically, I'm using a software package that requires CentOS with kernel 2.6.18-53.somethingorother. This is a separate issue that has been brought up with the vendor. Generally this just means I install CentOS 5.1 and don't do a full upgrade. we are monitoring with Nagios. The Nagios check_snmp plugin won't compile without a valid path to snmpgetnext, which I can't get to install. This is severly hampering my ability to monitor the server.
I have a serious problem in booting centos 5.4 x86 as shown in the attached picture.I tried to backup before using fsck command, but I could not make a backup of damaged lvm on hard drive.First I made a rescue centos at virtualbox, and installed centos 5.4 x86 on virtual hard disk.And I attatched damaged hard drive. S I can see this damaged hard drive's lvm as attached picture.Please let me know how to backup my files and to use "fsck.ext3 --rebuild-tree using livecd".
View 2 Replies View RelatedI have 2 Centos 5.2 install that cant be snmp queried from another machine and I am unsure of what to check next.
To make sure it was not an incorrect iptables rule i temporarily turned off iptabes with the same results. I have checked the hosts file and it is correct on both machines.
How to install and config SNMP in my CentOS Web Server
View 1 Replies View Relatedi tried to configured snmp configuration for opennms monitoring tool to get disk alert ..when i entered the following command i doesint receive any sysobj id can somebody say how can i get my sysobjid in centos 5.4
View 2 Replies View RelatedI am having issues installing nagios-plugins using yum. Been using Suse don't have much experience with CentOS (CentOS release 5.2 (Final), ) Linux hoster 2.6.18-92.1.22.el5 #1 SMP Tue Dec 16 12:03:43 EST 2008 i686 athlon i386 GNU/Linux It says
"Error: Missing Dependency: perl(Net::SNMP) is needed by package nagios-plugins"
Whereas net-snmp-perl.i386 is already installed.
yum deplist nagios-plugins
Loading "fastestmirror" plugin
Loading mirror speeds from cached hostfile
[Code]....
how can i view/monitor what a user is typing in other terminals in centos?
View 1 Replies View RelatedI have installed Net-SNMP.It is binded to port udp 161I start it with the command: snmpd -Lo
when I do snmpget -v 1 -c public localhost system.sysObjectID.0on the same machine the snmpd is running on- I get a respond SNMPv2-MIB::sysObjectID.0 = OID: ccitt.1when I send same request from another machine (using SNMPc program) - I see no reaction.I used "wireshark" to monitor packets, and I see the requests sent from the other machine. I also see them get to the first machine.
mkvmerge -o <filename without extension>_TV.mkv -S <filename> && mkvextract tracks <filename> 3:<filename without extension>.*** && perl /home/brian/Desktop/ass2srt.pl <filename without extension>.*** && rm <filename without extension>.***
Doing these commands for multiple command line file inputs is the goal. So I can just type ./script.sh *.mkv in my terminal.This is what I have so far, but it doesn't work whatsoever.
I need to enable SNMP on our Suse linux boxes, so that What's Up Gold can monitor them.
I need to add the community name, that I know, but where?
how to make mib file for snmp....
View 3 Replies View RelatedI have enabled SNMP monitoring in my debian box (using apt-get install snmp) and configured it to allow my PC to query the server.
I'm able to query the server and get SNMP data but when I get STG to give me a per/second graph of the interface octets, it only updates the data every 12 seconds or so.
Is this a setting in SNMP which could be causing this problem? If so, how can I enable it so that SNMP can give me up to the second octet rates.
2 machines (one of them working as a server to monitor the network with IP 192.168.100.110 and the other one to be monitored with IP address 192.168.100.1):
In the first machine:
snmpwalk -v1 localhost -c public sysName (working fine)
snmpwalk -v1 192.168.100.1 -c public sysName (don't works -> Timeout: No Response from 192.168.100.1)
In the monitored machine:
snmpwalk -v1 192.168.100.110 -c public sysName (it works)
snmpwalk -v1 localhost -c public sysName (dont works -> Timeout: No Response from localhost)
I'm trying to sniff snmp traps being sent to a NMS. I'm setting -s to 0 but when I start sniffing, some of the packets, instead of being decoded, show me messages like this:
Code:
[len1468<asnlen1663]
What is that supposed to mean?
OS: Centos 5.5_x86
I've searched quite a bit for how to set up Java environment variables with the newest java JDK. I installed java using the following commands:
yum groupinstall "java development" (I need it for the application I am trying to run)
yum install "java"
I have them both installed however I can't seem to get java to function. The application I am trying to run requires that I set java environment variables any solutions?
I am facing issues on few machines but rest all are ok. They have the same config but I don't know what is wrong. I tried as much as I could but couldn't fix it. Here is the rpms installed on this client
[code]...
The same config is working for all clients but have problems with few machines. May be I am doing something wrong in config or testing at very basic level.
I have an issue when sending snmp traps. I have an embedded system connected to a SNMP manager. I am sending traps from the box to the manager continuosly. After sometime I don't see any trpas coming out.
I get this error message.
Cannot open file /proc/net/tcp ...
: Too many open files
Cannot open file /proc/net/snmp ...
: Too many open files
What could be the reason for such an error?
I have recently set up nagios on a ubuntu server (9.10), and set it up to monitor all the servers, switches etc, following the quickstart guide provided on the nagios website.My problem is this:I have setup the nagios-plugins, and tried to set it up to monitor the network switches via SNMP but receive the following within the nagios web interface:SNMP problem - No data received from host I tried it from the command line, and got the exact same error.Is there some further configuration I need to do to be able to get this data?I've used up all my google-fu, and read over everyone else's problems on every forum I could find, but to no avail.
View 6 Replies View Relatedsnmpwalk -v1 -c public localhost system
No log handling enabled - using stderr logging
MIB search path: /root/.snmp/mibs:/usr/local/share/snmp/mibs
Cannot find module (HOST-RESOURCES-MIB.txt): At line 0 in (none)
SNMPv2-MIB::sysDescr.0 = STRING: Linux ipbrick 2.6.30.10-586-smp-64gb #2 SMP Mon Dec 28 14:44:55 GMT 2009 i686
SNMPv2-MIB::sysObjectID.0 = OID: NET-SNMP-MIB::netSnmpAgentOIDs.10
DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (17496443) 2 days, 0:36:04.43
SNMPv2-MIB::sysContact.0 = STRING: Root <root@localhost> (configure /etc/snmp/snmpd.local.conf)
SNMPv2-MIB::sysName.0 = STRING: ipbrick
SNMPv2-MIB::sysLocation.0 = STRING: Unknown (configure /etc/snmp/snmpd.local.conf)
SNMPv2-MIB::sysORLastChange.0 = Timeticks: (1) 0:00:00.01
SNMPv2-MIB::sysORID.1 = OID: IF-MIB::ifMIB
SNMPv2-MIB::sysORID.2 = OID: SNMPv2-MIB::snmpMIB
SNMPv2-MIB::sysORID.3 = OID: TCP-MIB::tcpMIB
SNMPv2-MIB::sysORID.4 = OID: IP-MIB::ip
SNMPv2-MIB::sysORID.5 = OID: UDP-MIB::udpMIB
SNMPv2-MIB::sysORID.6 = OID: SNMP-VIEW-BASED-ACM-MIB::vacmBasicGroup
SNMPv2-MIB::sysORID.7 = OID: SNMP-FRAMEWORK-MIB::snmpFrameworkMIBCompliance
SNMPv2-MIB::sysORID.8 = OID: SNMP-MPD-MIB::snmpMPDCompliance
SNMPv2-MIB::sysORID.9 = OID: SNMP-USER-BASED-SM-MIB::usmMIBCompliance
SNMPv2-MIB::sysORDescr.1 = STRING: The MIB module to describe generic objects for network interface sub-layers
SNMPv2-MIB::sysORDescr.2 = STRING: The MIB module for SNMPv2 entities
SNMPv2-MIB::sysORDescr.3 = STRING: The MIB module for managing TCP implementations
SNMPv2-MIB::sysORDescr.4 = STRING: The MIB module for managing IP and ICMP implementations
SNMPv2-MIB::sysORDescr.5 = STRING: The MIB module for managing UDP implementations
SNMPv2-MIB::sysORDescr.6 = STRING: View-based Access Control Model for SNMP.
SNMPv2-MIB::sysORDescr.7 = STRING: The SNMP Management Architecture MIB.
SNMPv2-MIB::sysORDescr.8 = STRING: The MIB for Message Processing and Dispatching.
SNMPv2-MIB::sysORDescr.9 = STRING: The management information definitions for the SNMP User-based Security Model.
SNMPv2-MIB::sysORUpTime.1 = Timeticks: (0) 0:00:00.00
SNMPv2-MIB::sysORUpTime.2 = Timeticks: (0) 0:00:00.00
SNMPv2-MIB::sysORUpTime.3 = Timeticks: (0) 0:00:00.00
SNMPv2-MIB::sysORUpTime.4 = Timeticks: (0) 0:00:00.00
SNMPv2-MIB::sysORUpTime.5 = Timeticks: (0) 0:00:00.00
SNMPv2-MIB::sysORUpTime.6 = Timeticks: (0) 0:00:00.00
SNMPv2-MIB::sysORUpTime.7 = Timeticks: (1) 0:00:00.01
SNMPv2-MIB::sysORUpTime.8 = Timeticks: (1) 0:00:00.01
SNMPv2-MIB::sysORUpTime.9 = Timeticks: (1) 0:00:00.01
End of MIB
Why are some errors in the beginning of the output? How can I remove them? The file HOST-RESOURCES-MIB.txt is in /usr/local/share/snmp/mibs.
I have created this thread as it sis realy hard for me to send traps from my Linux workstation... I m lost with v1/v2/v3 snmp... So here is the initial configuration: (without traps)
rocommunity myrocom
rwcommunity MyL33tP4ss 10.5.32.202
rwcommunity MyL33tP4ss 127.0.0.1
syslocation "FR"
syscontact root
From there i can "poll" my system. But what should i do if i want my Linux system sending traps when disks are full or system overloaded etc...I have found information on Internet but not easily understandable It is for v3:
rwuser admin
createUser admin MD5 mypasword
#
# From there i would have to comment the lines regarding the communities
#
[code]....
10.5.32.202 is my management host ... is this config ok ? But it seems that trap2sink is for v2 ? How does it work ?