I just installed CentOS 5.2 and then applied the updates to 5.3. Now I get repeated popups saying:
The NetworkManager applet could not find some required resources. It cannot continue.
I killed it and ran it from a terminal and saw the following output:
** (nm-applet:4648): WARNING **: Icon nm-device-wwan missing: Icon 'nm-device-wwan' not present in theme
** (nm-applet:4648): WARNING **: No connections defined
I am not an expert and have only been managing my server not too long. My server is running kind of slow so someone suggested running the 'top' command via shell, and I found a few things using major resources, but I don't know what they are or how to fix them. can someone suggest some things.
View 6 Replies View RelatedI have OpenVPN running successfully on a CentOS Linux server. All remote clients connect without a problem and can ping the server LAN (10.5.0.0/24) . The server address is
10.5.0.1. All network shares on the server are available to the remote clients via SAMBA shares and this works well.The problem is that I am unable to get the remote clients to access services on the LAN clients. For example, there is a webserver running on a Windows XP PC (on the server LAN @ 10.5.0.2) with no firewall enabled. The remote VPN clients can ping this webserver at 10.5.0.2, but cannot browse the webserver at [URL]. All clients on the server LAN can however browse the webserver. The remote clients are using Windows XP and VISTA with OpenVPN 2.1.1.
I am new to VPNs and networking, but from my research, it seems as if this may be a routing issue. I would appreciate any help you may give in getting the remote clients to access the services on the LAN clients (other than the server @ 10.5.0.1).
The server configuration is:
local 192.168.10.6
port 1194
proto tcp
[code]...
i recently got an msi wind U100x running on linux suse enterprise 10 sp1. i am totally new to linux and i believe that msi wind is not helping. i remember at some point seeing an icon in my toolbar to indicate available wifi networks, but it disappeared a few weeks ago, and i was never able to locate it again. out of dispair i reset the computer to factory settings. all i have is "no network connection" icon, and when you click on it you have both enable networking and enable wireless.
i read somewhere in help that i should have a knetworkmanager, but i can't find it anywhere. all i see in my control center is network card, and when i go in there, i go to 'user controlled with networkmanager' and i see 'micro-star international ethernet controller not configured'. before i reset to factory settings i used to have a wireless card as well.
in a word: i am totally lost and don't know where to start. any step by step to help me connect again?
on my dell latitude e6510 opensuse 11.3 kde 4.4.4 with tri boot windows 7 and two suse if boot with windows7 and I connect to internet by wired eth0 and then reboot in opensuse, networkmanager doesn't find my networkboard eth0 but only wireless, I have to reboot, enter in bios setup, exit, reboot, and then opensuse find my eth0, I tried with gnome too but is the same
View 8 Replies View Relatedi use networkmanager 0.7 shipped with CENTOS 5.4
The resolv.conf is not written correctly every time i reboot the machine...it seems to ignore all sysconfig configurations !
this is the resoult resolv.conf after every reboot
# Generated by NetworkManager
# No nameservers found; try putting DNS servers into your
# ifcfg files in /etc/sysconfig/network-scripts like so:
#
# DNS1=xxx.xxx.xxx.xxx
[Code]....
I'm using CentOS 5.4. I want to set-up a PPTP connection (I'm the client). I installed the NM pptp plugin from EPEL's repository. I have configured my PPTP connection in the NetworkManager applet but now I don't know how to connect to the server, I mean, there's nothing like 'Connect now'.
View 1 Replies View RelatedI've been running CentOS on my laptop for a few weeks now. I don't know what happened today, but when I boot up, the NetworkManager wont show up on the panel, and I don't have access to wireless networks or Internet. I tried booting my Windows partition and the wireless works fine. I can't seem to remember any latest change I've made aside from the wallpaper =) Any ideas where I should start debugging? I could see the module "iwl3945" still loaded. Here's a manual type of my lsmod | grep iwl3945
iwl3945 90177 0
mac80211 137929 1 iwl3945
cfg80211 30793 2 iwl3945,mac80211
i just finished installing CentOS 5 in my laptop. While I was trying to configure my Wireless network to connect internet, I found a guide in CentOS site which recommended to start "NetworkManger" service so as to setup wireless network. I followed and it Worked great.
But i would like to understand the difference between "Network" service and "NetworkManager" service. I had initially thought restarting "Network" service would help. explaining the basic difference between these 2 services.
I ran into this today accidentally turned on networkmanager and it took it upon itself to rewrite some things and proceeded to make any DNS lookups on my server Especially those reverse DNS for SSH and SFTP take so long they would just time out instead of completing.. Disabling networkmanager did not undo the damage either. Short fix, Erase your resolv.conf file and add 2 lines to it as so, your nameservers!
nameserver xxx.xxx.xxx.xxx
nameserver yyy.yyy.yyy.yyy
save, and run the following commands
service network restart
service httpd restart
service sshd restart
Mine had a search line added by networkmanager and some others, when i reverted it back to as above, almost instantly after restarting the services the systems lookups were once again, lightning fast. DNS lookups were taking upwards of 20 seconds for unknown reasons after this happenned
get an error "NetworkManager not find some required resources. It cannot continue"Killing & restarting yields: "Icon nm-device-wwan missing: Icon 'nm-device-wwan' not present in theme'.How do I fix this? Is NetworkManager just wireless? If so, can I turn it off permanently?
View 1 Replies View RelatedI am trying to use CentOS 5.4 to set up a secure laptop, largely because of it's SELinux functionality. Unfortunately I couldn't get wireless to work properly using the default NetworkManager so I installed wicd. Initially it buggered up my whole installation but after relabelling files using SEL I can now use my system again. but.. I can't use it with SELinux enabled, as it denies the required accesses for wicd to work. I also get similar SELinux denials for wpa_supplicant. A couple of snippets from /var/log/audit/audit.log -
[Code]....
After reading and trying tons of tutorials and several OS reinstalls, I'm stuck trying to load wireless on my Dell Vostro 1400 laptop. Before you say search forums! I hurry to tell I did. No solution seems to work. WLAN chipset - Broadcom's BCM4311 / BCM 2050. 1st scenario - native CentOS 5.3 drivers Although CentOS recognize WLAN card and displays it's name correctly, neither network or NetworkManager sees any of wireless networks.
2nd scenario - Broadcom's drivers Most know Broadcom has released Linux drivers. I had some more luck with them than in 1st scenario although problems occur. After successfully compiling Kernel module, wireless networks are discovered and can be successfully connected but no pages load. It seems like DNS is not resolving at all and page loading timeouts instantly. Tested on TKIP-encrypted network.
I just upgraded by box from Fedora Core 9 to Centos 5.2. Finally!I have a 500GB SATA drive, it's partitioned into three equal size slices, hda1 through 3. The old Fedora was on hda1, I installed the new Centos on hda3. I instructed the installer to write the MBR to /dev/hda, not /dev/hda3. Fdisk says I have sector 0 unused.First, the system wouldn't boot - it just looped through the BIOS, rebooting over and over again. The BIOS sees the disk, but it never loaded Grub. I tried re-running grub-install /dev/hda, and not I get a Grub Error 17 after stage 1.5 loads.
I can boot from rescue OK, the grub.conf man menu.lst look fine, it's pointing to "root (hd0,2)". It's either the BIOS that can't find the MBR, or the MBR can't find Grub.When I looked at the disk with fdisk after the install, hda1 was still marked bootable, hda3 was not, so I swapped bootable flags but that has not made a difference. I also appended the new grub to the old grub thinking I could get the MBR (if it is there) to load the old grub and thence find the new Centos, but that didn't work either.Mobo is an old Shuttle AK35.Any ideas? Did I mess up by not telling the system to put the MBR on /dev/hda3? Is there a way to fix this without reinstalling?
I've installed the CentOS 5.1 from a CD only yesterday and everything is working fine except Mysql that came from the CD distribution. I have detected that my system has mysql.
[root@onion /]# rpm -qa |grep mysql
mysql-5.0.22-2.1.0.1
[root@onion /]# find . -name mysql
./usr/bin/mysql
./usr/share/mysql
./usr/lib/mysql
However I'm unable to find mysqld, safe_mysqld or mysql_install_db in my filesysytem.
[Code]...
Is it possible to list/find/compare the program versions on a Centos system, against Redhat/Centos Errata/Security/Bug lists? Sort of looking for a way to make sure that all the packages on a system are ok, and not a security risk-- Without having to update every package. A pseudo code, in my mind is:
[Code]...
I am trying to get the wireless enabled in my laptop. Following is the dmesg log I get:
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[code]....
Where can I find a bunch of GDM theme RPM's for CentOS 5.4? All my efforts at Googling only results in Ubuntu (.deb) themes.
View 4 Replies View RelatedI have a OpenSuSE 11.1 box that is running mysql and apache. My database is only about a megabyte in size and I only have a few users per day on my site. How is it that with 8GB of RAM over 5GB is being used?
View 5 Replies View Relatedthere slackers, Can you give me some resources on using TOR? [URL]... I have used TOR and privoxy using a tutorial online, however, if you have some good links, I will study them.
View 2 Replies View Relatedwhere I can find a SIProxd RPM for CentOS 5.4/5.5 ? (64 bit architecture)I can't seem to find one and when I did an install from source, due to problems with libosip2, it gave me this error: [root@static-host src]# siproxd siproxd: error while loading shared libraries: libosip2.so.4: cannot open shared object file: No such file or directory
View 1 Replies View RelatedDoes anyone know of any decent web guides that will help me set up a DNS service running on 127.0.0.1 that will automatically forward requests like [url] to httpd running on 127.0.0.1 yet forwards requests to [url]to a 'proper' DNS service?
View 5 Replies View RelatedFedora 15 Alpha
3861 user 20 0 904m 128m 33m S 0.7 6.4 1:11.52 xulrunner-bin
1323 user 20 0 1555m 95m 31m S 13.5 4.8 4:06.87 gnome-shell
3494 user 20 0 1028m 50m 21m S 12.8 2.5 1:43.32 evolution
I just wondering what is the difference between RES, SHR, and VIRT.
1) The VIRT always seems to be higher. Is this using the paging file system. (virtual memory on the harddisk, the swap memory)
2) Is the RES memory the actual physical RAM memory?
3) Is shared memory sharing memory with other processes?
4) Just a final question. As I am running on a HP Mini 210, memory and CPU is a resource I don't have a abundence of. So if was to compare for example 2 difference browsers i.e. firefox and midora. What should I brench mark between to 2 to find what one uses less resources?
I got a fairly powerful media system standing in the living room. Most of the time it is idle, maybe playing some music. At the same time I got a pc in my office that is less resourceful. Sometimes I'll run programs through ssh with the -XC command. This way a program will seemingly run on my office pc, while it is actually running on the media system. However:
- 1 Sound doesn't transfer to the office pc.
- 2 When using a program I need to constantly be aware where I save my files. Sometimes it is located on the remote computer, sometimes it isn't.
Is there an alternative way to use the resources on the media system? E.g. run a program that is stored on the office pc and process it on the media system?
Both systems run Ubuntu (office 10.04 - media system 10.10).
I just recently upgraded to 10.04 (LTS), and I have been using stardict app for a long time with nothing but success on each of my laptops anc omputers I have had over the past 5 or so years. However, now on one laptop after starting the stardict app, using panel the applet I create on my xfce4-panel (as per normal), and looking up a word (highlight and press shift key which i use for quick word search using stardict), the app begins using 100% cpu resources and I am forced to kill the process.
The problem is intermittent, meaning it only occurs half of the time I am using startdict, while the other half of the time it operates normally. I have been trying to see if there is some sort of pattern, perhaps other apps running at the time the problem occurs, but I have not noticed anything that looks suspect, since I generally fire up stardict after boot in and have had it happen (the problem) without even any other apps open (just testing to try and find some sort of pattern to locate the potential issue).
I use a standard set of dictionary files for each of my comps, and currently have stardict operating fine on 2 other laptops, both running 10.04, with the same set-up (xubu, same apps, and settings pretty much) and no indications of this problem on either (other) laptop.
I installed ubuntu 10.10 a few days ago which ran very well on the live CD but after I upgraded to 11.04 Ubuntu uses just under 100% of my cpu after a few mins loged in and my ram usage increases by about 5MB per sec starting the second I log in. I am using Classic Gnome and it seems to do this wether I have metacity or compiz turned on. Does anyone know what is going on or know about a way to lower ether my cpu or ram usage
View 3 Replies View RelatedI am going to write two or more programs that will take control of the same resources on Linux. What are the common methods/functions that can do locks/synchronizations in C?
View 1 Replies View RelatedI was thinking of converting openproj to kplato, but I can't edit the resource I've added. Even when adding the resource all I could do was add the name and work type.
I didn't find anything in a google search, or at koffice.org/kplato, or in the deskop help.
How do I edit the initials, email, available... all the other resource fields?
I have a problem with kmix, which uses 100% of my processor without stopping. And this is providing to rise of temperature above 80 degrees Celsius. The problem became actual after one of updates of 11.4 series.
View 9 Replies View RelatedDoes ubuntu use less resources than windows 7/vista? what exactly does this mean? when i'm using ubuntu, my laptops gets somewhat hot, but when i'm on windows 7, it doesn't.
View 9 Replies View Related
