Ubuntu Multimedia :: Install Ffmpeg In R19000-version Not Github?
May 27, 2011
I have installed ffmpeg via github on a ubuntu 11.04-machine.An application - ClipBucket - require ffmpeg version r19000...When doin a ffmpeg -version I get the following:Quote:
ffmpeg version git-N-29993-ga4b6000, Copyright (c) 2000-2011 the FFmpeg developers
built on May 26 2011 04:30:20 with gcc 4.5.2
configuration: --enable-gpl --enable-version3 --enable-nonfree --enable-postproc --enable-libfaac --enable-
[code]....
View 4 Replies
ADVERTISEMENT
May 11, 2010
I received a few updates today, one of which is mplayer. Now mplayer is broken and from what I can gather it's because it's incompatible with the version of ffmpeg I have installed. But the real problem is that mplayer and ffmpeg were originally installed from the debian-multimedia repo but the update for mplayer is from the debian repo. I can't go back because this new mplayer is dependent on libdirectfb-1.2-9 whereas mplayer from debian-multimedia is dependent on libdirectfb-1,2-0.
In case you want the error from mplayer:
mplayer: relocation error: mplayer: symbol codec_wav_tags, version LIBAVFORMAT_52 not defined in file libavformat.so.52 with link time reference
View 10 Replies
View Related
Jul 20, 2010
Since ffmpeg 6 is out for some time, when will Ubuntu Lucid afford such a new ffmpeg package from its repository?
View 2 Replies
View Related
Aug 18, 2015
I am running debian testing (stretch) with gnome-shell 3.16 and iceweasel 41.0b1 as the only browser on a laptop with a dual boot setup ( windows 10 pro 64 bit is the other OS). I am running firefox 41.0b1 in windows and I am able to login to github with no issues at all. I have set my ip address manually as well as the dns settings on both operating systems.
The issue is that I cannot connect to github when in debian. I have tried changing the ipv6 and dns settings in about:config with no success and also tried a different user agent profile but still no luck. Whenever i log on to URL.... i get the message "Iceweasel can't establish a connection to the server at github.com.... " I seem to be able to connect without any issues in every other https site so far.After changing my ip settings under gnome-network manager all is fine and github up and running again
View 0 Replies
View Related
Aug 4, 2010
CentOS 5, installed ffmpeg and compiled the ffmpeg.so, from fffmpeg-php-0.6.0. Everything works fine. Then upgrade the php to 5.2.13 (using an external repository)recompiled ffmpeg.so but now when trying to load php:PHP Warning: PHP Startup: ffmpeg: Unable to initialize moduleModule compiled with module API=20050922, debug=0, thread-safety=0PHP compiled with module API=20060613, debug=0, thread-safety=0These options need to match in Unknown on line 0
View 2 Replies
View Related
May 31, 2011
How to install blender 2.5 and up to the latest version in my ubuntu 10.04 o.s. I just want to have that software coz it is a latest version of blender... ..
View 2 Replies
View Related
May 23, 2011
How do I Upgrade to or Install the latest version 1.1.9 of VLC Player in LUCID?
View 2 Replies
View Related
Aug 12, 2010
[code]...
which gives me a deadbeef folder in my home folder with latest version therein. next steps are
[code]...
i installed automake all six versions in the synaptic as some are different as to what they can do. also libtool, gettext and this is what i get any thoughts? am i missing a program or 2 to install from git?
[code]...
View 9 Replies
View Related
Apr 3, 2016
I'm on Debian stable, I want to know if I could continue on Debian stable but install the latest version of KDE (5.6.1) without moving to testing or unstable. I want to install KDE latest (5.6.1) without having to have all of my other installs to be potentially unstable.
View 3 Replies
View Related
Aug 25, 2010
Which is better for my needs? how to use Git and I like it and don't think I'd want to use anything else.
I like the way SourceForge lets your project have it's own website. But all those "Unix names" are taken and I don't like the idea of having to give my project a terrible name because everything is taken.
Also, I keep hearing the way people say GitHub is so great, but what *are* those advantages?
View 1 Replies
View Related
Dec 1, 2010
I first created a fork on github from an existing git repo. Then I made changes to my fork and pushed them to github again. After that the person from who I forked included my changes in his code but made some alterations on it. What I want to do know is having the exact code he has in the repo. This way I am sure that I actually develop on the same code.
I wonder how I should do this. I tried using git mergetool but I had some conflicts. So if I resolve the conflicts and make some mistake here, then I still wouldn't have the code the original repo(the repo where I forked from) has. what is the correct way to do this?
View 2 Replies
View Related
May 18, 2011
How do setup github on sabayon. And i try to connect to git git@github.com i get ths error. PTY allocation request failed on channel 0
View 2 Replies
View Related
Jan 13, 2010
I've got a bunch of HD files in .mkv format that I want to convert to a format that the 360 will read (currently just trying .avi files) so I can stream the media to my xbox360. I'd rather avoid transcoding the entire file, so I tried unpacking the .mkv file into audio and video (and subtitle if necessary) and repacking said file into avi using ffmpeg. The repacking is where I am having the problem. Here's the commands I tried at first (it might look familiar):
Code:
mkvextract tracks file.mkv 1:temp_video.avi 2:temp_audio.ogg 3:temp_sub.srt
ffmpeg -i temp_video.avi -i temp_audio.ogg -vcodec copy file.avi
However, I keep getting this annoying error:
Code:
Error while opening codec for output stream #0.1 - maybe incorrect parameters such as bit_rate, rate, width or height Where stream #0.1 is the output audio stream to the .avi file. I think I have narrowed it down to the fact that the input streams are all 6 channel (5.1 surround sound) which mp2 doesn't support (the ffmpeg audio default) so I did this instead:
Code:
ffmpeg -i temp_video.avi -i temp_audio.ogg -vcodec copy -acodec libmp3lame file.avi
I'm still getting the same error, but when I use
Code:
ffmpeg -i temp_video.avi -i temp_audio.ogg -vcodec copy -acodec libmp3lame -ac 2 file.avi
to change the sound to stereo it works. Problem is I'd like to keep my media in surround sound. Any thoughts on how to get all 6 channels in the new mp3 file? I'm fairly certain that mp3s support 5.1. And after some messing around, I haven't found that my ffmpeg can transcode audio format from 5.1 back to 5.1. So since (I think) the 360 can play .ac3 files I decided to just copy both the video and audio file to the .avi file sans transcoding using
Code:
ffmpeg -i temp_video.avi -i temp_audio.ogg -vcodec copy -acodec copy file.avi
however now about halfway through, I run into this error:
Code:
NULL @ 0x22f3a00]error, non monotone timestamps 62562 >= 62562
av_interleaved_write_frame(): Error while opening file I can't seem to find any solution to this problem anywhere online, does anyone know how to get around this? I'd prefer to use ffmpeg for this if possible. (so I can write a script and just attack an entire directory at once) For what it's worth, I'm using the latest ffmpeg in the ubuntu (karmic) default repositories.
View 1 Replies
View Related
Apr 26, 2010
i want to convert a song from ogg format to mp3 using ffmpeg the command i use to do this is
ffmpeg -i /home/john/Music/input.ogg to mp3 output.mp3
i then get then get a message back saying
"unknown format"
how do i correct this ?
View 1 Replies
View Related
May 18, 2010
The command line to convert to ogg theora
ffmpeg -y -i input.flv -sameq OUTPUT.ogv
runs perfectly on 9.04 but on 10.04 it gives errors:
Code:
ffmpeg -y -i input.flv -sameq OUTPUT.ogv
FFmpeg version SVN-r0.5.1-4:0.5.1-1ubuntu1, Copyright (c) 2000-2009 Fabrice Bellard, et al.
configuration: --extra-version=4:0.5.1-1ubuntu1 --prefix=/usr --enable-avfilter
[Code].....
View 9 Replies
View Related
May 27, 2010
It seems more and more people are encoding with the MKV container on bit torrent these days, and a lot of the shows I'm watching are starting to release almost exclusively with .mkv formatted videos. This is not a problem if I want to watch the shows on my computer but I've become accustomed to watching them on my PlayStation3 using my thumb drive. It seems the offical documentation for the PS3 includes a list of supported codecs [URL], but when I use FFMPEG to convert with libxvid video and aac audio in the MP4 container my PS3 says the output video is not supported. I've also tried most combinations of libxvid, libx264, mpeg4 for -vcodec and aac, libmp3lame for -acodec in several different container formats but nothing seems to work. I have found one option that always works:
Code:
ffmpeg -i inputfile.mkv -sameq -ac 2 outputfile.mpeg
I don't like doing it this way, however, as the output file is twice the size and the audio quality is terrible. If I don't reduce the audio channels to only two using -ac 2 FFMPEG throws an error (apparently MKV audio supports 6 channels). And preserving the video quality in MPEG video using -sameq produces too a large file (and I prefer to keep my files as lossless as possible). Ideally I want to save the files on an external HD I have but if a single episode of a show is 1.5 GB it's not very pratical.
Anyway, the PS3 docs say it supports h264 and xvid with aac audio, but apparently I'm doing something wrong. Has anyone sucessfully used FFMPEG to convert an MKV to MP4 for use on a PS3?
View 3 Replies
View Related
Jul 28, 2010
I have a .mkv container with proper video (h264/~6000kbps) and audio (DTS/1500kbps). For some reason I want to have similar quality but with another video and audio codecs. For video it goes well and ffmpeg is very helpful here, no problems. Also, I want DTS to become AC3/320-448kbps/5-6 channels. Commands like this:
Quote:
ffmpeg -i in.dts/mkv -acodec ac3 -ac 5 -ab 448k out.ac3
gives me not proper reordered sound in channels, so I hear center on the right, music on the left, etc.
Is there a way to make that properly with ffmpeg?
Also, I have a question about multi core encoding cause I have a quad processor. Ffmpeg seems not using them in all the way, I get something like 25% of CPU usage while encoding. Command -threads, even using the h264, does not make any extra load of cpu.
View 4 Replies
View Related
Jul 29, 2010
I'm making little animated bits in GIMP with the gap package. I can only get GIMP to encode the files as .avi. Problem here is that when I try to use any converter, it compresses 80MB files down to 1MB-4MB files and, unsurprisingly, the video quality is terrible. WinFF and ffmpeg (via terminal) output at a drastically reduced size. Is there some way to keep the files big/big-ish? I don't want to lose any detail.
View 6 Replies
View Related
Aug 31, 2010
i want to convert DVD movie to mp4 using x264 and aac. I'm having some issues with GUI apps.I use ffmpeg in terminal for all my single file converts and prefer to use it but don't know how to use it in terminal for a DVD movie to mp4.
View 9 Replies
View Related
Nov 4, 2010
Recently I installed gtk-recordMyDesktop, so that I could record my movements and send the Media File to my dad, so he could learn how to use Ubuntu too [plug]My problem is converting the .ogv file to .avi - I have tried ffmpeg but it loses quality dramatically.Can anyone tell me how to get better quality video out of ffmpeg, or let me know another way to convert the .ogv file to .avi or something that is widely used?
View 3 Replies
View Related
Feb 13, 2011
I've been recording one of my classes with my android phone, and the file it gives me is an .amr file. I'd like to convert that to .mp3, and I was hoping I could use ffmpeg to do it via the command line. Here's what I did, and the output that I got:
Quote:
roger@KarmaLaptop:~/Desktop$ ffmpeg -i Net202-week6.amr Net202-week6.mp3
FFmpeg version 0.6-4:0.6-2ubuntu6, Copyright (c) 2000-2010 the FFmpeg developers
built on Oct 5 2010 22:36:53 with gcc 4.4.5
configuration: --extra-version=4:0.6-2ubuntu6 --prefix=/usr --enable-avfilter
[Code]....
View 5 Replies
View Related
Jul 17, 2011
i have a mp4 file and i will convert it with ffmpeg and add new subtitle i use this command
Code:
ffmpeg -i Taylor-Swift-Mine.mp4 -b 768000 -r 24 -s 640x360 -aspect 16:9 -newsubtitle Mine.srt -ab 128000 -ac 2 -ar 44100 out.mp4
and output command
Code:
ffmpeg version N-30884-g54dd50d, Copyright (c) 2000-2011 the FFmpeg developers
built on Jun 20 2011 19:09:46 with gcc 4.4.3
configuration: --enable-gpl --enable-version3 --enable-nonfree --enable-postproc --enable-libfaac --enable-libopencore-amrnb --enable-
[code]...
At least one output file must be specified Do you see i can't convert my file now how i add subtitle to my video in ffmpeg
View 1 Replies
View Related
Jan 23, 2016
The github site has a .deb package that I would like to use but the package is not in the debian repository. I am not sure how best to go about installing it. I think my options are to click on the .deb file and download directly to a directory or I could look at somehow finding the file in a repository. Also, I think there is a way to use aptitude or apt-get to download directory from the website. Are there advantages/disadvantages to the ways mentioned?
View 4 Replies
View Related
Jan 28, 2011
I created a private/public pair. I put the public on github.But I can never push to github.Every time, it says public denied. In order to push, I need to do this:eval ssh-agentssh-add ~/.ssh/github_dsaThis is driving me nuts that I have to do this every time. So, I just put it in my ~/.bashrc file. I feel like that's a hack. Is this normal?
View 1 Replies
View Related
Jan 14, 2010
have downloaded from internet to a mp4 format, so I can play them in my Nokia 5800.This is command line that works perfectly:ffmpeg -i "input.avi" -f mp4 -vcodec libxvid -s 640x360 -b 768kb -r 25 -aspect 16:9 -acodec libfaac -ab 96kb -ar 44100 -ac "output.mp4"n:Is there a way to make it really quiet so I can run it from cron..
View 2 Replies
View Related
Jan 17, 2010
I installed Audacity to convert an mp4 to an mp3. Now, I don't necessarily need Audacity to do this, but for the time being I'm more concerned with getting Audacity to work properly as opposed to getting an mp3 onto my iPod.
In Audacity, I went to Edit>Preferences>Libraries. For the MP3 Export Library, Audacity recognizes LAME, but under the FFmpeg Import/Export Library it says "FFmpeg library not found." I hit the Download button and read this page on how to install FFmpeg, noticing the warning about needing FFmpeg 0.5 or later on Linux.
I fired up Synaptic and searched for "ffmpeg," chose the vanilla version and installed it along with two dependencies which I don't exactly remember but I bet they were libavformat52 and libavdevice52.
Back in the Audacity Preferences window I chose the "Locate..." button to point to the newly installed libraries, but Audacity is not recognizing/installing them successfully. I've tried pointing to the following files:
/usr/lib/libavformat.so.52
/usr/lib/libavformat.so.52.36.0
/usr/lib/i686/cmov/libavformat.so.52
/usr/lib/i686/cmov/libavformat.so.52.36.0
/usr/share/lintian/overrides/libavformat52
[Code]....
Did I install the wrong version of FFmpeg or libavformat? Any pointers?
View 4 Replies
View Related
Mar 15, 2010
I have a file with about 6 .flv files and I wish to batch convert them to libmp3lame. I have tried making a #!bin/bash script with all the files in e.g.
Code:
ffmpeg -i filename.flv -sameq -acodec libmp3lame -f asf filename.mp3
I have inserted all the filenames individually into the script but when I ran it I got too many errors and i was wondering if someone knew a quicker way to do it e.g. a script that would batch convert all .flv files in that folder to .mp3 format.
View 8 Replies
View Related
Mar 31, 2010
how can i merge two files with ffmpeg?
one is : /home/pt/t/pa1.flv
the other is : /home/pt/t/pa2.flv
1 o merge with ffmpeg
ffmpeg -i /home/pt/t/pa1.flv -i /home/pt/t/pa2.flv -vcodec copy -acodec copy /home/pt/t/dd.flv
the problem is: the merged file ( /home/pt/t/dd.flv ) just contain one file--the first one
/home/pt/t/pa1.flv,there is no the second file--/home/pt/t/pa2.flv in the /home/pt/t/dd.flv
[Code].....
View 4 Replies
View Related
Apr 24, 2010
I just installed 10.04 today and i love it I'm trying to install some software tried devede but i didn't like it only text menu's and nothing more.I also found tovid software looks really cool and i was wanting to try it i tried to install the debs but no go the tovid website say's to install from subversion it also says something about installing ffmpeg from subversion.So what is subversion and how do i install from it?
View 2 Replies
View Related
Jun 20, 2010
I recently developed a taste for the Alac format and ffmpeg will oblige with this line of code
Code:
ffmpeg -i <input> -acodec alac <output>.m4a
and this worked beautifully one file at a time and
How does one do all the files in a given folder? Is there an asterisk one adds as in shntool.
View 2 Replies
View Related
