CentOS 5 Hardware :: Request For Working Xorg.conf For ATI 4xxx Systems?
Nov 10, 2010
I just set up a new CentOS 5.5 system (using the 5.5 DVD, yum updated all packages to latest) which unfortunately due to various issues and most critically availability, has an ATI-4350. The install went OK but X does not detect the card properly so it's using the slow VESA driver. I followed the instructions here [URL] to download and install the ATI driver. It appeared to be correctly installed but not used.
Display still detects my monitor and 4350 as unknown and using some "Vendor supplied driver". Yet under the "Dual Head" tab, if I would to enable it, the ATI-4350 comes up as an option, hence implying that the driver was corrected installed and the card is actually detected. I suspect it might have to do with my Xorg.conf, although trying to edit in several ways didn't make it work.
View 1 Replies
ADVERTISEMENT
Dec 11, 2010
I've just done a fresh install of Lubuntu 10.10 on an older Sony Vaio laptop. Having learned the hard way about editing xorg files, I wanted to create a backup of the xorg.conf file so that I dont have to do another install when I screw everything up. In a terminal, I typed
[Code]....
View 8 Replies
View Related
Apr 9, 2010
I have installed Kubuntu 8.04.2 on a USB stick with persistence to keep any changes I make after a reboot and it works fine. I then installed the 185 Nvidia driver to give me higher resolutions and it works fine.
But each time I reboot, my updated xorg.conf is replaced with the default xorg.conf that ships with that version of Kubuntu and a backup is made of my updated xorg.conf (the correct one) which looks like xorg.conf.20100409135913. I have to put the backup xorg.conf back in place to get my Nvidia driver to work with the correct screen resolutions again. Otherwise my screen resolution is too low.
What could be causing this behavor? I'm sure it not the persistence feature of the USB stick failing since a backup is made of my original xorg.conf.
I might add more information. The xorg.conf that gets changed after a reboot says "This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database." #
View 11 Replies
View Related
Feb 16, 2011
1. What is the difference between files (xorg.conf and xorg.conf-vesa)
2. No matter how hard I try I can't change keyboard layout in xorg.conf-vesa (I change it in file ) but there is no actually anything changing, it starts to get annoying - for example - below goes my xorg.conf-vesa, if I uncomment and set line from
[Code]...
View 3 Replies
View Related
Jan 26, 2011
I've read the how-tos (thank you oldcpu!) and wikis about how xorg.conf take precedence over the section configuration files in etc/X11/xorg.conf.d/, if it exist. I also understand that the xorg.conf can be partial. If it is missing some sections, these will be taken from the corresponding xorg.conf.d section config file. Currently I'm using a xorg.conf generated by nvidia-settings in one of my home machines, due to a dual-monitor setup. After generating xorg.conf, the device sections are:
in xorg.conf:
Code:
Section "Device"
Identifier "Device0"
Driver "nvidia"
[code]....
My question is if the Option "UseCompositeWrapper" "True" will be used or not. In other words, if a section exist in xorg.conf then it's correspondent in xorg.conf.d/ will be completely ignored *or* only the lines in xorg.conf.d/ that already exist in xorg.conf will be ignored?
View 5 Replies
View Related
May 3, 2010
I'm running the ubuntu based Green OS and cant get my video card properly configured. i've already gone through the forums to figure out what i need to do to get my ATI card working but my system wont let me access the xorg.conf file. i can see it using the the GOS file editor but it wont let me save the modifications. when i attempt to edit from a terminal window with su privelages it tells me that /etc/x11/xorg.conf does not exist. i've even tried booting into recovery mode and using the root instead of the sudo command. nothing i've tried will let me open the file.
View 3 Replies
View Related
Feb 10, 2011
I have a number of CentOS servers with latest 5.xI have 3 nameservers in the resolv.conf files. All 3 nameservers test out fine when checking for domain lookups.I'm having some trouble with ns1 and shut it down.l None of the CentOS machines fail over to the ns2 & ns3 entries. Basically everything stops resolving even though the other 2 nameservers are alive and well.
View 1 Replies
View Related
Jul 11, 2010
I have installed debian testing squeeze, I have such issues, so no X11 working when startx
Code:
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
[code]....
how to make the X11 working ? I have the console but well X11 is better and needed for apps such as skype
View 5 Replies
View Related
Mar 8, 2010
I'm trying to get full 3D acceleration working with an Intel 82865G Integrated Graphics chipset on my Arch install. I'm wondering if it's possible to get it to work with xf86-video-intel, as I can't seem to get the Intel-provided drivers to compile. As also stated, I have to xorg.conf to speak of, so I can't exactly go in and simple edit lines, unless I wrote it from scratch, which I'd really rather not do, LOL. I've tried Google (including their special Linux search mode), and LQ Search, and I can't seem to find information that's relevant enough to me that I can use. Here's glxinfo (only the (hopefully) relevant portions):
Code:
[root@archie mrcode]# glxinfo | grep -i "direct rendering"
direct rendering: Yes
[root@archie mrcode]# glxinfo | grep -i "renderer"
[code]...
View 13 Replies
View Related
Mar 1, 2011
I did fresh install of Slackware64 ver. 13.0 and immediately updated it to slackware-current by following the directions here: http://slackwiki.org/Upgrading_SlackwareSo far all is normal and functional except for xorg-server.When I did Xorg -configure under ver.13.0, it worked perfectly and detected my nvidia 8800 GTS vidcard and 1440 x 900 lcd monitor.However, after upgrading to "current" and xorg-server-1.9.4, I'm getting a segmentation fault and cannot configure a working xorg.conf.I've been searching xorg seg errors, but haven't found a solution yet.My /var/log/Xorg.0.log:
[ 234.357]
X.Org X Server 1.9.4
Release Date: 2011-02-04
[code]....
View 14 Replies
View Related
Jun 29, 2009
Is there a Linux HOWTO for setting the xorg.conf file and installing drivers?
View 1 Replies
View Related
Sep 22, 2010
I recently tried to plug in a second monitor to my graphics card in an attempt to mess around with a dual monitor set up. This created a duplicate effect (which I expected at first) but downgraded my original monitor to the second monitors max resolution. Now my xorg.conf appears to be blank and I dont believe my fglrx drivers are working anymore.
When I try to start compiz from bash I get the following:
Code:
When I attempt fglrxinfo:
Code:
I'm running Kubuntu, Karmic
AMD64
ATI Radion x1350
What could have happened? All I did was plug in a second monitor and restart!
View 1 Replies
View Related
May 22, 2011
I have used nVidia my entire linux life (about 5 years clean and sober from M$). Recently, I have switched over to an ATI Radeon HD 5550 card. After many trial and error setups, I finally got the resolutions and screens set properly with a xrandr command, which I have now added to a shell script in ~/.kde4/Autostart. It has worked for me for a while now, but I really would like to get it set in the xorg.conf.d files so that I don't have to wait that extra few seconds after login for the screens to fix themselves.
Is there an easy way to take what xrandr does and export it to the xorg.conf.d files? If my video card recognizes my default monitor as DFP2 and the tv that I only sometimes use with this computer as DFP1, how can I ensure that the login screen for openSUSE/KDE4 appears on my default screen (an issue that drove me nuts a few months ago when I tried Ubuntu to see what all the fuss was about)?
My xrandr command that I use to fix it all is:
xrandr --output DFP2 --auto --pos 0x0 --primary --output DFP1 --auto --right-of
I am using the proprietary Radeon driver from the ioda repository. DFP2 is a monitor which has a optimum resolution of 1920x1200, and DFP1 is an 1080p HDTV. I can not reverse the output plugs for the screens even though my monitor is an HDMI monitor because I use the actual HDMI port on the video card to output audio to the television and the other plug is a DVI that I convert to HDMI for the monitor.
View 1 Replies
View Related
Jun 28, 2011
Does anybody have experience with linux tuning. I`m realy interesting about sysctl.conf tuning settings for batch(3d rendering, phisycs simulations, etc.) servers. Does anybody has an experience with linux tuning - I mean memory and CPU settings for heavy loaded systems. What kind of settings You have in Your clusters ? I`m working with Red Hat Enterprise 5 x86_64.
View 2 Replies
View Related
Jun 2, 2010
Sorry if this was well covered here when most up-to-date Slackers moved to 13.0, but I have just jumped from 12.1 to 13.1. Generally very happy that I do not have to think about xorg.conf as I always found the structure of this conf file a tad confusing. However if I do need to (for example) change my video driver (I might for example want to try the nvidia driver from NVIDIA) or configure my touchpad - how do I do this ?
I understand that xorg.conf can still be created. If I do so, do I have to put all the stuff in that used to be there or can I just add the stuff I need to make the changes I am looking for?
View 4 Replies
View Related
Aug 18, 2010
i i use ubuntu 10.04 and i buy a mouse, and i cant install it. i read on forum i need to put :
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
[code].....
wireless via Bluetooth � 3-button laser mouse with scroll wheel � resolution 1600dpi, adjustable on 800dpi � range up to 10m � computer with Bluetooth or dongle required � 2x AA batteries required
View 14 Replies
View Related
Jul 19, 2011
i lost touchpad functionality during gdm login (i cant tap clicking) after playing with xorg.conf
would somebody kindly paste-ing their xorg.conf for eee pc (1000HE) ?
View 2 Replies
View Related
Aug 5, 2011
I just did a net install on an old powerpc G4 and it seems pretty successful.except i cant change any of the monitor settings from the control panel in gnome (or LXDE)its showing 'not recognised' and only allows 768 x 1024 in very restricted colour.I dont think there is a hardware problem:
- the monitor is a generic old CRT which has worked fine with everything before this.
- the display card is an AGP 32Mb - original with this G4 and was working.
- the computer works great in Mac OS10.3 - (but OS10.3 doesnt support flash or up to date web browser any more, hence trying debian).
i have searched debian forums and various sites, but i couldnt find a fix. It looked like i should edit xorg.conf file but I am not able to find it. I looked in /etc/X11 - but not there.could someone tell me please, do i need to find xorg.conf?
View 7 Replies
View Related
Feb 18, 2011
I install Debian 6 in my thinkpad W500.
W500 has two video card : Intel integrated and ATI discreted .
Now I am using Intel Integrated video card . I find no xorg.conf file in /etc/X11 .
How to make Debian 6 using two different video cards through changing BIOS setting ?
View 8 Replies
View Related
Feb 3, 2010
While trying to implement some of the suggestions in the fedora 12 common problems (Intel Graphics)I discovered I cannot get the resolution correct using a xorg.conf file . Here is the file# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
[code]....
View 5 Replies
View Related
Sep 2, 2010
Cannot edit xorg.conf on Fedora13. I do it from the root but changes is not saving.
View 7 Replies
View Related
Mar 31, 2010
I am running Crossover Office on a laptop on OpenSuSE 11.2 with a fair bit of success (Outlook is still twitchy related apparently to the http stack). But whenever I do disk I/O to a windows app and I have a second monitor plugged in it flashes to black.
In prior OpenSuSE versions I used to be able to stop this by adding entries to disable the TV output in xorg.conf but now it appears that there is no xorg.conf in use. How do I disable this in the post-sax2 era?
Dell Lattitude E6500 4Gb x64_86
View 1 Replies
View Related
Oct 19, 2010
How to create /etc/X11/xorg.conf for openSUSE 11.3?
View 4 Replies
View Related
May 26, 2010
i have VIA UniChrome Pro IGP grapgics. When i install linux max resolution 800x600@60hz and xorg.conf file are blank
some time ago i used fedora "xrandr" works great. But i don't liked fedora, as ubuntu
so i need program thats have option "Model"
Example: LCD 1028x768 or other
View 2 Replies
View Related
Jun 6, 2010
I've got an i5 Macbook Pro, on which I've got Ubuntu 10.04, which I use 90% of the time (mainly for work).
I've added a few lines to xorg.conf to make the graphic card run cooler and thus get some more battery life. Sometimes, though, I do need full graphic potential, for which I have another xorg.conf prepared without those lines, so I can switch back and forth when I need it.
Currently, to change back and forth, I rename the files accordingly and reboot, which is a pain in the neck. I tried restarting gdm after switching files instead but it didn't quite work (maybe I wasn't doing it correctly).
So, fellow experts, what's the easiest and fastest way to switch between two different X11 config files?
View 1 Replies
View Related
Oct 13, 2010
I've just installed the latest ubuntu (10.10) on vmware workstation and noticed the resolution is not 96 dpi so my fonts look a bit unsharp
I wanted to change that and noticed I don't have an /etc/X11/xorg.conf? So my question is of course...where should I put the "Option..." line to change it to 96 dpi?
View 1 Replies
View Related
May 7, 2010
Ubuntu 10.04
I can't find xorg.conf on /etc/X11/ How to create it?
View 7 Replies
View Related
Aug 15, 2010
I noticed that Sid/unstable (Gnome - kernel 2.6.33 - xorg 1.7) does not use xorg.conf file for X driver. The X driver seems to get detected automatically by the kernel and xorg, which is done perfectly even with 3D support. But I noticed that it uses the xorg.conf file for the input devices. When I renamed it, the keyboard and mouse were disabled. Is there a way to get the input devices detected automatically also and get red of xorg.conf file completely?
View 5 Replies
View Related
Jul 3, 2010
get my VIA chrome 9 video card running with my Beamerproperly installed the openchrome driver and edited the /etx/X11/xorg.conf but the resolution settings are ignored. Something seems to be wrong with my hsync settings:
Code:
$ cat /var/log/Xorg.0.log | grep -i "CHROME"
(--) PCI:*(0:1:0:0) 1106:3371:1458:d000 VIA Technologies, Inc. CN896/VN896/P4M900 [Chrome 9
[code]....
View 5 Replies
View Related
Feb 20, 2011
I just did a clean install of 13.1 on one of my laptops and the scroll doesn't work on the synaptics touchpad. I've seen some comments about adding a file to the /etc/X11/xorg.conf.d/ directory. I don't have this directory. Is it ok to add this, or did I screw something up during the install. I did another 13.1 install about a week ago and it is also missing this directory. Is this just something in current and not in 13.1?
View 1 Replies
View Related
