Removed python. Now writes at boot / bin / sh: ro: No such files or directory. Kernel panic - not syncing: Attempted to kill init! . In addition to installing the new drive does not see a way out. When installing a new version of the Update mode to DVD, it overwrite the old files from previously installed packages and their settings? It is possible to recover without the update?
View 3 RepliesI just upgraded by box from Fedora Core 9 to Centos 5.2. Finally!I have a 500GB SATA drive, it's partitioned into three equal size slices, hda1 through 3. The old Fedora was on hda1, I installed the new Centos on hda3. I instructed the installer to write the MBR to /dev/hda, not /dev/hda3. Fdisk says I have sector 0 unused.First, the system wouldn't boot - it just looped through the BIOS, rebooting over and over again. The BIOS sees the disk, but it never loaded Grub. I tried re-running grub-install /dev/hda, and not I get a Grub Error 17 after stage 1.5 loads.
I can boot from rescue OK, the grub.conf man menu.lst look fine, it's pointing to "root (hd0,2)". It's either the BIOS that can't find the MBR, or the MBR can't find Grub.When I looked at the disk with fdisk after the install, hda1 was still marked bootable, hda3 was not, so I swapped bootable flags but that has not made a difference. I also appended the new grub to the old grub thinking I could get the MBR (if it is there) to load the old grub and thence find the new Centos, but that didn't work either.Mobo is an old Shuttle AK35.Any ideas? Did I mess up by not telling the system to put the MBR on /dev/hda3? Is there a way to fix this without reinstalling?
I have successfully installed CentOS 5.4, and after choosing it from the GRUB menu, I am getting the following error message:1706-Smart Array Controller Extended BIOS Data Area Memory Corrupted. Int 13h BIOS Cannot Continue - System Halted.I'm using two SAS disks that came along with the server, left the default RAID configuration (1+0) on a P410 controller
View 5 Replies View RelatedIve installed centos freebsd and mandriva but i want to manage grub from my centos and y create successfully a boot load for freebds. But for mandriva it just doesnt work... so how can a create a boot load entry for mandriva from grub centos?
View 1 Replies View Related3 partitions (in order): Windows 7, CentOS and shared data partition.
I need to increase the size of the Windows 7 partition (c:windowswinsxs seems to be something not easily remedied).
GParted didn't work in moving things around (bad sector) so I wiped out its partition (# 2 out of 3) and I was able to increase the size of the Windows 7 partition (I can reinstall CentOS easily and not much work lost).
Except ... no more grub menu (unsurprising). This incantation does allow me to boot into Windows 7.
Is there any way of rebuilding the grub menu short of reinstalling CentOS (5.5)?
I have a laptop that came with Windows Vista (64-bit) installed. I created a new partition and installed XP (also 64-bit) alongside it.Last night I shrunk my XP partition and created another new partition and installed Linux (CentOS 64-bit) on it. I made an error in judgment and didn't allocate enough space, so I need about 10 more gigs for the Linux partition. It boots up and runs, but I need about 10 more gigs of storage for the files I want to keep on the partition (and yes, they have to be on the partition, I definitely need to know how to do this, not a workaround)I went into Vista and shrunk the XP partition by 10 gigs, so now I have 10 gigs of free, non-partitioned space.
As it stands, when I start up the computer I get the GRUB boot loader. I can boot my Linux install or choose "Other" and be taken to the Vista boot loader. From there I can choose XP or Vista to boot.So, my question is... what is the best way to append the 10 gigs of free space to the Linux partition? Is this something I should do inside of Linux? I have the option to do it in Vista, but the partition shows up as "healthy" but without a file system type.I just don't want to screw up the boot loader, partitions or anything else.This isn't my area of expertise, so if anyone could give me a good suggestion or solid answer
have all ways been hiding in the background read not say a thinglets start well i look after 2 dell poweredge 2650 with 12 gig ram installed servers has been running fine onwell i though it was time to upgrade to 5 all went fine till reboot Memory for crash kernel (0x to 0x) not within permissible range ! well what i have been reading this is the norm for now What is mean by ignore it? LoLwell so i did the system keeps boot till i get to this linesbin/mingetty: /sbin/mingetty: cannot execute binary file alot, and it shows. INIT: Id "5" respawning too fast: disabled for 5 minutes ...so maybe its a memory issue so took 8 gig out left 4 in the system now it reboot alls good with only 4 gig of ram installed so is there a way to fix it to use all the ram can i get the system boot on 4 gig and then add the 8gig later on
View 7 Replies View RelatedI am trying to install CentOS 5.2 on an HP rp5700 desktop unit. These units were originally sold as a Point of Sales unit I believe, but HP also markets it as a high life cycle server for SMB market.I tried to load CentOS on this unit via CD (created from downloaded ISO of course). It presents the initial CentOS banner page and waits for the obligatory "enter" to continue. It begins the boot process up to discovering the PCI stuff and just locks up, no response. I have to power down to restart.Since this does not even get to the point of installing. I am at a loss what to do next. Has anyone had a similar issue with other PCs.The boot stops at the lineACPI: PCI Root Bridge [PCI0] (0000:00)
View 3 Replies View RelatedI've Got one Problem with My Computer soon after success installation of when the boot-loader ask me to choose OS at CENTOS 5.4, multi boot boot-loader if i choose windows then computer tries to boot windows but fail and give the error message that there is a problem on reading the hard disk, But when i restart it and start with LINUX then computer start successful with no error message, now i do not know what to do cause i need to use Windows and all my programs are in windows..
View 1 Replies View RelatedI had a sata drive go down on my software raid array a couple days ago..After replacing the defective drive, I rebuilt it using fdisk to set partitions and mdadm to add the drive back into the raid array.After getting md2 to mount to /mnt I copied the /mnt/etc/fstab and /mnt/etc/mdadm.conf to the /etc directory and rebooted..When I boot, my /dev/md2 partition is not mounting to / It is not loading all of the services at boot time it should.. the size of /dev/md2 on / is even wrong.. it should be about 1.3TBwhen I manually mount /dev/md2 to /mnt I can access all of my data, through /mnt/var/www/vhosts and so on.. I am at a loss, why is the machine booting to this craziness?All of my data, that I know of can be accessed when md2 is mounted to /mnt[root@ESS000272 etc]# cat mdadm.conf
# mdadm.conf written out by anaconda
DEVICE partitions
MAILADDR root
[code]....
i want to change my server to a intel d510mo withoutchanging the installation.The old nstallation runs on a centos 5.4 asus amd board witha sata raid, sata-sil adapter in no raid modus.and that is the problem.i boot the centos on the intel board, and only the sata-sil module is loaded, so noata drive is found.How can i change this? udev? i disabled the scsi-hostadapter in modprobe.conf, but no
View 1 Replies View RelatedHow can I create/boot CentOs 5.3 ram image?I'm looking to create a CentOs ram image that once booted will not access the hard drive.
View 3 Replies View RelatedI had Windows XP Pro 32 bit and CentOS 5.4 installed on my Dell M6400 laptop and life was wonderful. Until I had to reinstall Windows. In the process, I reformated the C: partition of the drive where the Windows operating system was installed. I was careful NOT to reformat anything else. Now I cannot boot CentOS. The drive that has both the Windows and CentOS still shows the same partitions as were there before I reinstalled Windows, namely:
NTFS (C:) 171.82 GB
/boot 102 MB
(F:) 60.96 GB
is where my CentOS partition has all of my linux data and apps. I assume /boot should be the boot partition for CentOS I use Acronis OS Selector to show the partitions to boot. Now CentOS doesn't show as an option even if I go through the process of trying to detect a CentOS boot partition using OS Selector. I have researched this in the forums but have not found anything that was of help. There was a thread from someone who had trouble booting Ubuntu on a system with Windows Vista and CentOS but I did not see anything there that looked like it would help in my situation.
I applied the Kernel update that showed in the updater via the GUI.It now won't boot anymore.Memory for crash kernel (0x0 to 0x0) notwithin permissible range.WARNING calibrate_APIC_clock: the APIC timer calibration may be wrong.
View 2 Replies View RelatedI am busy to do some tests using the Adaptec 1430sa hardware raid controler .I started the setup by generating the raid 1 aray and it worked ok .I did the regular setup of Cent Os 5.5 64 bits all worked ok but the system do not boot .When I start the box it enter the minimal grub screen .I tried to install a first time on the MBR like suggested and how it need to be done for soft raid setup .nd I tried to install it on the first cluster from the boot sequence like possible on second choice
View 2 Replies View RelatedI am familiar with linux and have done some managing of servers before. I just tried to install centos 5.5 on a server, but after booting the screen was blank and my monitor said vga mode not supported. I found online to press ctrl+alt+F1, which allows me to see the rest of the boot commands. Then after I was able to see the boot commands it says enabling /etc/fstab swap, but never says ok or gets past that part.
View 2 Replies View Relatedi want to change boot install message "wel-come to CentOS" .How can i change it.
View 1 Replies View RelatedProblems with xen 3.1.2 creating and installing domU CentOS 5.5 I am trying to do a virt-install --prompt --paravirt, and the install error out while trying to download install RPMs. I have googled for xen centos virt-install and various permutations. I have found similar howtos for 5.4 and 5.3, but they resulted in the same outcome. I did find several posts with similar issues, but no solution was posted.[URL]..
View 4 Replies View RelatedI am in the process of building a new server on an Asus P5QPL-AM motherboard and an Intel E8600 processor.explain to me the difference between the two versions and what would you recommend.Also, is there any advantage of SATA over IDE hard drives?
View 1 Replies View RelatedFor various reasons, I have to learn my way around CentOS. I have an old computer (P3) with Slackware on it. I threw in a second HDD that I had lying around and installed CentOS to it. I was figuring that I'd just decline installing GRUB or point GRUB to Slackware as the second OS and end up with dual boot.
The CentOS install, though, blew right past that part with offering me any options. It put a small boot partition on the CentOS drive and now the box boots straight into CentOS.
I've spent the better part of the day trying to get GRUB to boot the Slackware drive and had no luck, though I've learned a lot about GRUB error messages.
By the way, CentOS uses GRUB v 0.97.
Question: someone could point me to a reference.
Here's the output of fdisk -l on that computer (/dev/sda is a 4GB SCSI disk that was originally the boot disk for Windows 2000 server on that computer):
Code:
Here's the currentGRUB file. I added the section about Slackware. I've also tried pointing it at:
Code:
I've also tried:
Code:
Code:
Slackware's LILO:
It's been six months or more since I used this computer. It's my experiment-er "play" computer and I had taken the HDD out to test a computer for one of the members of my LUG, so I can't remember exactly how I configured the LILO install, but, if I did what I usually do, I installed it to the MBR of /dev/hda. I have considered just blowing away LILO, but I'd be happier if I could just use GRUB to call LILO.
This on a Vostro 1220 Laptop w/ Intel 5300 wireless:
A.I have long boot up time.I think it's because of the eth0 network search which I don't use.I have an intel wireless 5300 card running.How can I speed up the boot time, i.e. disable or change the eth0 at boot, the searching?
B:When I restart or shutdown, the screen flashes repeatedly and gets some garbled colors along the top before finally rebooting looks like windows ME or something).This vostro has an intel x4500HD vid chipset in it.
C.How do I get into gnome configuration editor to turn on Metacity compositing? Alt-F2 and run gconf-editor doesn't do it. I don't do compiz, but need compositing.
D.I need to install Chromium Browser as it sync my bookmarks.I have RPMforge enabled btw also...how can I do that? I.e. rpm repo for chromium?
This will help me get off to a running start so I can get up to speed on CentOS..
I meet a problem about "Your boot partition is on a disk using the GPT partitioning Scheme but this machines cannot boot using GPT." in installation. Does GRUB-0.97 on CentOS 5.4 support GPT?
View 4 Replies View RelatedIf I boot my CentOS 5.2 box, then insert a Verizon aircard, then modprobe usbserial I end up with /dev/ttyUSB0 and 1. If I then warm boot (init 6) the machine and modprobe usbserial /dev/ttyUSB0 and 1 are there and usable. If I cold boot the machine (init 0 and power on) then modprobe usbserial, /dev/ttyUSB0 and 1 do not show up. If I unplug the aircard and plug it back in, the devices are created and ready to go. The machine will be in an unattended environment and I can not remove the device on every power up. How can I get the machine to find the usb device on the cold boot vs the warm boot? I don't understand why there is a difference to begin with...
[Code]....
I have two servers, both running CentOS, but one running Cpanel as the control panel and the other running Webmin.
I would like to sync the web folders using rsync. However, when I sync the files from the Cpanel host the permissions look as follows:
Code:
But that doesn't work on the Webmin server which needs the following:
Code:
It seems the Cpanel install has the group as 'nobody' whilst webmin has it the same as the file owner. I can fix this by running:
Code:
But as the file transfers will be frequent, I don't want the files to be inaccessible until chown is run.
So, what I really want to know is - how can I change things on the 'webmin' server so that files with ownership owner:nobody will run?
The installer can't see my raid controller (I assume) as I'm getting the following error:"Error opening /dev/mapper/isw_jbhgjgjj_Vol0: No such device or address"It just sees them as 4 individual drives: sda, sdb, sdc and sdd.Please note that I have set up the RAID 5 in the controller bios interface and the image name is Vol0, which it seems that it tries to load but for some particular reason it can't.I have also tried different bios settings and nothing worked.
View 3 Replies View RelatedI'm running a fresh install on an intel i7 system on an asus p6t deluxe v2 motherboard with the onboard NIC (Marvell Technology pci-e). I know the NIC is working as when I boot into the onboard OS that Asus provides (Asus Express Gate SSD)I have a working net connection.Booting up CentOS hangs at determining IP information for eth0 and eventually fails with the following error:PING xxx.170.30.1 from xxx.170.31.231 eth0: 56(84) bytes of data---xxx.170.30.1 ping statistics ---4 packets transmitted, o received, +3 errors, 100% packet loss, time 2999ms, pipe 3 failed.
RTNETLINK answers: file exists.
RTNETLINK answers: file exists.
RTNETLINK answers: file exists.
[code]....
I'm trying to install a dual booting machine with OpenSUSE v11.1 32bit and CentOS v5.2 64bit. I installed OpenSUSE first and allowed it to install and configure grub in the MBR and after that I wanted to proceed with CentOS v5.2. The installation went fine with two notable exceptions:- when I had to configure grub installation parameters, CentOS offered me only 2 solutions: either install it on the MBR of the first hard disk or not installing it at all. Other distributions are more flexible allowing you to install it in the boot sector of the root partition for example. Because I didn't want to ruin the existent grub onfiguration, I reluctantly accepted not to install it for CentOS assuming that I could manually configure the entry later in grub's menu.lst file.
- when I was presented with the options for software components installation, I've clicked on virtualization category/function because I intend to use the machine as a VMware host. There was no guidance on screen at that point and I blindly assumed that by choosing the virtualization function I would get necessary tools and drivers that will help me further on. It seems that this was a wrong move as you can see it below.
After completing the installation, I tried to search for a template or guiding on how the menu entry in menu.lst should look like but the grub directory was empty, not surprisingly because I've told CentOS earlier not to install it. Using the files in the /boot directory from the CentOS installation I tried to improvise a menu entry but it's not working. The boot stops with famous Error 13: Invalid or unsupported executable format. Using the file command to check what kind of files I'm trying to load as kernels I'm getting :
marte:~ # file /mnt/vmlinuz-2.6.18-92.el5xen
/mnt/vmlinuz-2.6.18-92.el5xen: gzip compressed data, from Unix, last modified: Tue Jun 10 19:20:51 2008, max compression
[code]....
The first server I installed installed fine. The second server, installed with the same config, went to "kernel panic not syncing no init found try passing init= option in kernel" error. I tried reinstalling but it keeps going to that error after install reboot. The storage is ISCSI connected via Intel Server Adapter, which allows it to boot from ISCSI. Not sure if that's the cause for the problem, but the first server is connected to the same ISCSI and installed just fine.
Is there a way that I can make sure ISCSI module installs during installation? Although I think it is installed since it's able to copy the files and setup /dev/sda. I just wana make sure that it installs during setup.
I'm trying to create a CentOS based liveCD that mounts a NFS share and executes one script there. The NFS never mounts altough while logged I can mount it with the very same command that I use in the KS.
In the %post I have :
%post --log=/tmp/post.log --erroronfail
mkdir /mnt/nfs
mount -o nolock 10.23.1.1:/csc/RemoteHome /mnt/nfs
I added the --log in order to debug, but nothing is written in /tmp/post.log. I tried redirection on the mount command with >> /tmp/debug.log but this is not written. Maybe during the post sequence /tmp is RO ? Anyway, I tried with ifup lo, service portmap start in the %post, but doesnt change (I even have a service : command not found in the live cd creator output).
Here is the remainder of the KS :
lang en_US.UTF-8
keyboard us
timezone US/Eastern
[Code]...
I've got two USB webcams I'm trying to get running with CentOS 5.4 x86_64. I've downloaded and installed the gspca driver from http://mxhaard.free.fr/spca5xx.html. Running lsusb yields:
Bus 002 Device 003: ID 0ac8:307b Z-Star Microelectronics Corp. USB 1.1 Webcam
Bus 002 Device 002: ID 0ac8:307b Z-Star Microelectronics Corp. USB 1.1 Webcam