Applications :: Clonezilla - Cloning A Drive To A Partition
Oct 3, 2010
My dad passed away 2 years ago and he had a toshibia laptop, and today I've decided to start using it. I would like to reformat it to Arch Linux from Windows XP.
He has a 80gb hdd with everything on one partition (thats how windows does it). I would like to create another partition (~20gb, and I know how to do this) and have clonezilla clone the main partition and save it to the 20gb partition. This is because you can't clone and save to the same drive unless its partitioned. (I'm saying partition lot).
Anyway my fathers computer is very important to me, and having it remain intact as he left it is very very important to me. I know the easiest and most sarcastic response is to tell me not to use it, but I want to use this computer.
Does anyone have experience with clonezilla? Will it back up the ENTIRE HDD like it says it will, without missing any important documents and files scattered throughout the disc? And when I do finish the cloning, format, and at a later date restore using the image I copied, will it be like I never touched it?
View 1 Replies
ADVERTISEMENT
Jul 28, 2010
I want to clone my fedora8 HDD using clonezilla.I have downloaded,and want to boot from that.I have created one partition sda8 with 740 mb and formatted with ext3 and mounted that on /mnt. I have extracted the files onto /mnt from clonezilla zip file. I appended the necessary lines told by website to the grub.menu.lst , after rebooting when i select that clonezilla from grub,it was telling unrecognized format and cant mount the partition.
how to mount the partition permanently in fstab. Tell me how to modify the grub file to work correctly to boot from that partition.
Output of fdisk
Disk /dev/sda: 80.0 GB, 80025280000 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xa95ea95e
[Code]....
View 2 Replies
View Related
Jul 28, 2011
When I first switched from windoze to Fedora I trimed a bit of space off the end of the HDD, formatted it to ext3 and installed Fedora 14 there. I have now completely rebuilt the machine and put a 2TB drive in. My intention was to upgrade to Fedora 15, but after a few weeks trying to get the new gnome to anything resembling useful, I gave up and decided to go back to the reliable 14.
I tried the old drive, and everything worked great, so I though no problem, clone that over to the new drive, and job done, no need to mess about for weeks getting all my settings back. I booted from the old drive with both connected and ran gparted, It sees both drives but won't let me copy the old partition. It complains about 'LMV is not yet supported' I tried booting from a gparted ISO with the same result.
How can I get this sorted? I've got work needing done, I don't have time to start from scratch (*AGAIN*),
View 10 Replies
View Related
Nov 2, 2010
I want to move the entire contents of my backup HD to another HD. I could manually copy everything, but I was hoping to clone the entire backup hard drive. I tried to do it with Gparted, but as far as I can tell, I can't clone between drives, only between partitions on the same drive (I've done that before). So how can I do this in Linux? I think one of my drives came with a cloning utility on a CD, but I'm not sure I still have the CD.
View 2 Replies
View Related
Apr 1, 2011
I'm trying to "upgrade" from ubuntu 9.04 to ubuntu 10.04.2 via a clonezilla (using a maverick usb clonezilla software with it's vmlinuz and initrd.img). but this clonezilla is not from a bootable usb flash drive, usb drive or CD, it's from the hard drive.
Here's what I have:
1) one 500gig drive with a primary partition under LVM. this partition has a 490gig root partition (ubuntu-root) and a 10 gig swap partition (ubuntu-swap_1). It has an extended partition (/dev/sda2) that's not under LVM consisting of one logical drive (/dev/sda5) that is the /boot partition.
2) I've upgraded the grub to grub2 (version 1.96) which has better features.
3) I've deleted the swap and reconfigured this partition with a name of (livehd) and it has an ext3 filesystem. I've copied the clonezilla software to this partition which also has the ubuntu 10.04.2 image that I want to restore to the root partition.
4) I've modified the existing grub2 using the 40-custom file so that the grub menu has the "Clonezilla Ubuntu 10.04.2 upgrade" entry in it.
5) the initrd.img from clonezilla has LVM support since I opened up the image to a directory using "gzip -d -c /boot/initrd.img|cpio -i" to check it.
6) grub2 sees the (ubuntu-root), (ubuntu-livehd), (hd0,1), (hd0), and (hd0,5) devices and can list (ls) their directories
[Code]...
View 9 Replies
View Related
Nov 12, 2010
i am running ubuntu 10.10 and windows7 on a asus eee 1015. currently i have two partitions: 80GB for windows (NTFS) and 160Gb for Ubuntu (ext4).
I want to:
- shrink the windows partition (easy, no worries);
- Shrink the ubuntu partition
- join the space thus created in a third partition that i can use for storage, media etc accessible by both windows and ubuntu
The problem:
- i could not manage to get gparted live to run off USB stick (i get the unable to find medium.... error)
- even if i would get gparted to work and i succeed in shrinking the ubuntu partition as well, the two spaces reclaimed will be divided by the ubuntu partition, which means they cannot be joined in a third partition.
so here is what i want to do:
- shrink windows and create a new partition;
- format this new partition as ext4;
- somehow "clone" the data on my current ubuntu root into the new partition;
- format the current root as NTFS and use it as the storage partition
i am aware this may mean i would have to re-set grub etc but would the cloning of the partition be possible? that i would need to clone data from a 160G partition into a 40G partition.
BY THE WAY - forgot to mention that i have tried to load clonezilla off an USB drive and i get the same error: "unable to find medium..."
View 3 Replies
View Related
Jan 28, 2010
I work in a library and want to set up several newer PCs. I cloned a HD containing Ubuntu 9.10 using Clonezilla. When I put the HD in another computer (exactly the same as the one on which I did the cloning) it will not boot.
After pressing the power button, it proceeds as follows:
BIOS loads "Grub Loading" appears on screen for several seconds Ubuntu icon appears for several seconds Icon disappears and then nothing, blank screen
Regarding Clonezilla, I used the advanced screens but chose only the default settings.
Also, if I boot to the Clonezilla CD on the cloned computer, I can choose the HD and the OS loads without a problem.
View 6 Replies
View Related
Nov 19, 2009
I'm trying to clone a Linux install to a different laptop. It's made a little complicated by two facts:
1) The 'new' laptop I'm trying to copy my Linux installation to is actually older and has a smaller hard drive then the computer I'm copying from
2) The computer I'm copying from has both a windows and Linux installation; I only care about the Linux partition.
I figured I would copy only the Linux partition from my primary computer to the laptop, sense the laptop doesn't have a large enough hard drive to copy everything. So I used the DD commands to copy SDA3 (main Linux partition) from my main computer to SDA2 of my laptop. When I came back a few hours later I was surprise to find my laptop trying to reboot itself (I never turned it off). It would keep starting to reboot, failing, and restarting itself. Not too surprising sense its boot partition wasn't changed so it's trying to boot into centos when I copied a redhat partition to it.
The problem is that when I used a redhat boot disk the rescue mode was unable to find a Linux partition to mount. /dev/sda2 exists, but trying to mount it gets the complaint "No such file or directory". "fdisk -l" lists sda1 (the boot sector) and sda2. Sda2 is the correct size and reports Linux LVM for its system. But "fdisk -l /dev/sda2" gives the error message "Disk /dev/sda2 doesn't contain a valid partition table" Did I not clone the drive correctly, or was an error caused due to the boot sector not being copied yet (the laptops boot sector is smaller then my old computers, so I can't copy from old computer to laptop)? Can I salvage the laptops partition table somehow, or do I have to repeat the cloning process? And if I do have to re-clone my computer can anyone tell me what I did wrong the first time so it works this time? I don't care if I copy just the Linux partition or both windows and Linux. Even though my main computer has a larger hard drive I'm only using about half of its available space so it should be possible to copy both partitions if I could ignore the unused sections of the harddrive.
Edit: I used DD to copy a tiny part of the Linux partition from my laptop so I could look at it. Most of it is illegible binary of course, but I scrolled through till I found some text right near the beginning:
Code:
VolGroup00 {
id="F2MWxh-....-BidcLe"
seqno = 1
[code]....
So it seems that the DD command did copy everything over to the laptop, which is good to know. I noticed that it says device="/dev/sda3" right in the middle of the code I just posted. The Linux section of my original computer was SDA3 but I copied it to partition SDA2 of my laptop. So is the problem because the boot partition is for the wrong device? I don't suppose if I modified that one line to say SDA2 it would be able to load correctly? (Not that I know how I would modify the line, short of using the DD command again).
View 8 Replies
View Related
Jun 27, 2011
I am getting a new 4kb sector HDD for my laptop, WD scorpio black 750gb, I would like to image existing partitions on 512bytes sector HDD and move them to the new 4kb sector HDD, what's the best way to do this.
present config is as follows:
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code].....
I am planning to keep the same three partitions as the primary partitions on the new drive and add few more logical partitions. I would have liked to move to GPT but since I need Win 7, I am stuck with MBR partiotion table.
Now, I understand how to partition an Advanced format disk, what I want to know is how to move the existing partitions on the 80 Gb disk to the new disk?
I use Clonezilla to copy partitions but it is not compatible unless both the target and the source disks are already using 4096 sector size.
I can use Acronis True Image WD Edition to clone Win 7 but how do I clone Ubuntu?
Also my Laptop's chipset is limited to SATA 1.5, will it cause any issues, I know the bandwidth is not an issue.
View 7 Replies
View Related
Sep 3, 2010
I used Clonezilla to image a Ubuntu partition of 18GB and restored it to a partition of 30GB. (showing as "sdb1") I understand now that I should have put it onto a partition the same size as the original and then resized that partition with Gparted, but I put it directly onto a larger partition and thought all was well, but now I'm running into disk space warning messages. It still works fine but the OS still seems to think it is still on an 18GB partition and that it is running out of space. The partition "sdb1", is on a large drive I partitioned with Gparted. The various utils I have to look at partitions do not agree:
*Disk Utility reports sdb1 size as 33GB
*KDE Partition Manager reports sdb1 size as 30.28GB with 15.59GB used (therefore 14.69GB free)
*KDiskFree reports sdb1 size as 18.3GB with 1.8GB free
*Gparted reports sdb1 size as 30.28GB with 27.54GB used
*Gparted (used after booting from a Mint installation) give same result
*PROPERTIES (using live knoppix DVD) shows size of files as 16.0GB (16.5GB on disk)
After booting with Knoppix DVD and trying to copy everything onto another drive (to see how many GB there are) gives "invalid or incomplete multibyte or wide character" error message. how to sort this out, without resizing the partition as I've got a lot of data on the HD now.
View 1 Replies
View Related
May 24, 2011
I'm trying to backup a drive with an LVM2 partition. 8 of the 10 partitions in the LVM restore fine, two do not. SDA1 is the boot partition, SDA2 is an LVM2 partition with 10 partitions inside of it. When I restore the image created by Clonezilla the partition names are there but two of the partitions are unreadable and unmountable. I'm certain Clonezilla is skipping these two partitions because its entire image is around 40G and when I TGZ these two partitions I get an 80GB file. Clonezilla doesn't appear to give any errors and as it "winds up" it shows that it's unmounting the LVM partitions and I see my missing two in its list but when Clonezilla makes the image it never mentions the two I (really) want. I'm trying Clonezilla's DD method right now but it appears to be DDing each partition (going through the LVMs right now).
View 1 Replies
View Related
Aug 4, 2011
Recently purchased an SSD drive to replace my existing mechanical drive. My source hard drive is a 750gb and destination SSD is 256gb. My current partition setup on my source drive looks like this:
/home 639 GB, 137GB used
/ 46 GB, 6.4GB used
My destination SSD drive's partition table current looks like this:
/home 238 GB
/ 18 GB
I originally was going to use Clonezilla to do the partition copying but found out that the destination partition must be equal or larger than the source one.
View 3 Replies
View Related
Aug 10, 2010
I had to change my disc for a bigger one, and i want to transfer all my dataconfigurations, etc to a partition in another disk, a simple ctrl C, ctrl V will do or theres a specific tool that i need? I dont want to download all the updates, programs and go through the hassle of reconfiguring everyhtingmy new disk have windows 7 and i installed a fresh ubuntu on it but i want it to be a clone of my old onePS: i just notice now that grub no longer recognize both win7, the old and the new. What's wrong?
View 3 Replies
View Related
Jan 2, 2010
I'm trying to restore an image from a 40gb partition(6gb used) to a 100gb partition. I set everything up in gparted and and restored the partition image with clonezilla. In gparted, the partition shows the full 100gb partition with 6gb used, however when I boot windows and open the properties on the C: partition, it shows that it's only 40gb. Is there some setting to restore the partition image and use the full 100gb?
View 7 Replies
View Related
Mar 14, 2011
restore of Win XP partition - he wants to be able to "press the button" and restore the whole partition with XP using Clonezilla. Is it possible - to do this restore without Clonezilla CD? And he's planning to have 3 partitions on his HDD:Windows XP system partition partition for backing up system partition partition for personal data
View 1 Replies
View Related
Apr 13, 2011
have a binary image that I can copy to a partition and have done so successfully in the past. The image is smaller than the partition size, and everything is all good. However, I noticed that in copying the 5 gb image to the 9 gb partition there are 4 gb that are unnoticed by the system. It still registers the partition at the correct size in Gparted and Disk Utility.
View 3 Replies
View Related
Feb 5, 2010
I have been able to get a few of my desired tools working 100% (dban, gparted, ophcrack, UBCD) but what I would ultimately hope to get working is CloneZilla! I was able to get the Clonezilla user interface to load correctly but when I choose any of the options I encounter an error "ntfs volume version 3.1" repetitively. I have a feeling it is because I am launching the iso wrong in my menu.lst config file for grub. This is what I have.
title CloneZilla
find --set-root /CloneZilla.iso
map --heads=0 --sectors-per-track=0 /CloneZilla.iso (hd32)
map --hook
root (hd32)
chainloader (hd32)
boot
View 8 Replies
View Related
Mar 30, 2010
I've tried to run a Clonezilla VM using vmplayer. All works fine except when I get to the cloning section. I have three partitions on the HD; partition A, B and C.
A = Partition to clone
B = Partiton onto which the clone image of PartA is to be saved
C = OS partition which is running the Clonezilla VM.
I would like to save the partition as an image but when it actually comes to the nitty gritty of partition cloning Clonezilla does not recognise PartA or PartB. I get error massages along the lines of "No unmounted partitions found." When I drop into a shell prompt the fdisk -l output shows nothing. However, running from the liveCD it recognises both these along with PartC. Is there a way of carrying out the cloning using this method by tweaking vmplayer settings or is the project just not possible ?
View 5 Replies
View Related
Dec 4, 2015
I have read several manuals and online html on how to clone a partition to a greater one, I am still not sure about what to do.
Code: Select all# df -k /srv /usr
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/md5 38445384 195236 36297128 1% /srv
/dev/md3 8648896 1088016 7121540 14% /usr
What is the recommended procedure to clone i.e. /dev/mdx (/usr) partition to a greater one, say /dev/mdy, to accommodate for growth, whilst preserving attributes including timestamps (and yes, that means also including ctime).All of # cp -ax SOURCE DEST, # rsync -ax SOURCE DEST and # cpio modify ctime.Some sites recommend dd, i.e.:
Code: Select all# dd if=/dev/mdx of=/dev/mdy bs=512 conv=noerror,notrunc,sync
URL....However, I am not sure what will dd copy do with end of partition, and will it see the remaining space on /srv (it's contents are dummy and will be overwritten).
View 8 Replies
View Related
Oct 16, 2010
I have a dual boot and every program I try to clone the ubuntu partition seems to want to have the entire hard drive to clone to.In other words, if I attach an external hard drive and select the ext4 Ubuntu Linux to clone to a purposefully made ext4 partition in an external drive - every program wants to copy to the entire external hard drive.Any suggestions?I think that clonezilla allows more freedom but I just dont quite get it - the options seem a little confusing in that I am worried that I will copy the partition back to my actual machine.
I am probably being a bit paranoid, but if anyone can think of a simple program that allows me to simply copy one partition to another purpose made (external) partition then please let me know!!
View 3 Replies
View Related
Nov 1, 2010
I am trying to clone my internal drive on my laptop using the dd command after starting up my computer using the 10.10 installer CD. Nothing happens when I follow the instructions from this site: [URL] When I follow these instructions, it doesn't work. I know that I am not being specific here but all I can say is that nothing happens. What am I doing wrong. My internal drive is 250GB and the partition I created on my DOS formatted external drive is 250GB as well.
View 9 Replies
View Related
Oct 3, 2009
I have a rock solid server running CentOS 5.3 (probably 5.4 soon enough). Basic LAMP box with a few tweaks thrown in. Everything is running perfectly, with one problem - the drive is too small (I project it filling up to dangerous levels in 6-8 months). So, what I'm looking to do is basically clone the drive, store the image, pull the current drive and replace with a bigger drive (same number of heads and cylinders though), and install the image.
What I did do once, a million years ago, is put the new drive as a slave on the same IDE cable, and use dd (working from a live CD of the distro) to copy from the master (smaller) to slave (larger). Then, yank the smaller, change jumper on bigger drive from slave to master, and away I go. Next step as I recall was using gparted to get access to all the space on the new, bigger drive.
Is this more less still a reasonable way to go? I recall the issue was making sure the old smaller and new larger drive had the same number of heads/cylinders (although I don't remember exactly why).
View 7 Replies
View Related
Dec 12, 2010
I recently upgraded to a bigger hard disk. I used CloneZilla to copy my 150GB ext3 /home partition on my Ubuntu system to a shiny new 800GB ext3 /home partition. However, I've filled it up to almost 150GB, and I keep getting warnings that I have only 300MB available. It looks like the free space is being reported incorrectly. GParted recognizes the size of the partition as 800GB, and Nautilus reports the same when I boot from a live CD. I've tried using tune2fs to remove the reserved blocks and e2fsck -f to fix any errors, but nothing's changed.
View 4 Replies
View Related
Nov 8, 2010
I bought an 1tb hard disk today and cloned my old 160gb ubuntu install to the new disk using gddrescue (from this tutorial [URL]) and everything worked fine. The problem is that I can't resize my home partition to fill the rest of the disk. I've tried using a live-cd and booting from my 160gb hard disk but I still can't resize the partition.
Here's the "sudo fdisk -l" output:
Quote:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code]......
View 2 Replies
View Related
Oct 25, 2010
we have a Win NT4 system used for an important application used at two places. At one place it has gone bad. I want to create an image from good system and restore it at the second location. Is it possible to do this using "clonwzilla live cd"? Does it harm the good system? Can I save the created image to an USB drive?
View 3 Replies
View Related
Apr 23, 2011
I used Clonezilla an older version not the latest to backup an entire NTFS Windows XP drive to DVD last year. I have a series of three (3) of these DVD's but now cannot restore the backup image back to the same PC. The problem is that when booting with Clonezilla I don't have an option to restore from a CD or DVD drive since the computer comes with two working CD/DVD drives that are detected by the BIOS when the POST is displayed. I used one of these drives to boot with Clonezilla and the other one containing the backup image Disk 1 of Disk 3. Clonezilla only detects the two hard drives and a USB drive which is removable. Is there a bug in the restore process because it allowed me to backup the entire image of the hard drive onto a DVD last year but this time around there are no CD or DVD drive options available to choose other then the CD drive Clonezilla was used to boot up.
View 8 Replies
View Related
Mar 1, 2010
Is there a utility app that will allow 'ghosting' your current Linux harddrive to another. For example, my current drive is 40Gb, I'd like to ghost/clone it to a 320Gb harddrive. Using an app like this saves re-installing the O/S, software, configuration and allows making a disaster-recovery drive.
View 3 Replies
View Related
Apr 22, 2010
I'm trying to make an image of my whole hard drive (320 GB) to save on an external hard drive. I'm using Ubuntu Jaunty Live CD to do it, with this command
Code:
sudo dd if=/dev/sda | gzip -c > /media/ExpansionDrive/imagedd.img
At the beginning everything is going fine, but after few hours the transfer rate is incredibly low. After 1/2 hour, 20 Gb have been copied.
After 1 hour, 27 GB
After 2 hours, 40 GB
After 4 hours, 54 GB
After 8 hours, 71 GB
Is it normal? I've also tried to use ddrescue, but I have the same problem. Is there any other tool to clone hard drive with a constant transfer rate?
View 1 Replies
View Related
Jan 20, 2010
I have a Shuttle XPC with 3 drives. /dev/sda is a 320GB SATA drive with a basic installation. Two partitions, a swap and the rest is on /. The other two drives are 1.5TB SATA configured as a software mirror as /dev/md0.
I want to use dd to clone the 320GB boot/OS drive to a 750GB SATA I have at home. Last night I put the 750 in a USB enclosure and at about 6:00 PM fired off: dd if=/dev/sda of=/dev/sdd
It's now 7:16 AM and the dd is *STILL* going. Is this unusually long to clone the drive? Is there any way to check the progress or a way to launch dd with a progress indicator?
View 3 Replies
View Related
Mar 13, 2010
Tuesday night I wanted to make a backup of my Ubuntu ext4 partition via Clonezilla so I configured that an image had to be made and it would be saved on the NTFS external disk. But it said it needed 23 hours to create a 5gb backup, so I resetted my computer as this took too long. But after this, Ubuntu nor Windows recognized my drive.
I called Seagate and they told me after troubleshooting 30 minutes, that there is no option of fixing the drive and I had to send it to RMA. What could be wrong? Clonezilla works via a bootable ISO on Debian. The disk drive is still spinning. I already rebooted the external drive, but it's not working. In Linux the disk is no longer mounted and cannot be mounted:
Code:
brw-rw---- 1 root disk 8, 16 2010-03-12 00:50 /dev/sdb
brw-rw---- 1 root disk 8, 32 2010-03-12 00:50 /dev/sdc
brw-rw---- 1 root disk 8, 48 2010-03-12 00:50 /dev/sdd
brw-rw---- 1 root disk 8, 64 2010-03-12 00:50 /dev/sde
What could have happened? Would the data still be accessible on the internal drive? Did I just loose 1.5TB data that was stored on the external disk?
View 4 Replies
View Related
