OpenSUSE :: Faroese Keyboard Layout - Missing The Letters
Jun 3, 2011
I've been using using Ubuntu and Arch with gnome for ages, but after the whole gnome3 and unity hubub, I decided to go with kde and openSUSE. and I'm completely loving it. However, I have one problem Ubuntu (gnome) has the option to choose the Faroese keyboard layout, but in openSUSE with kde, it's not an option. Now I really need to be able to write a lot, so I need the regular Faroese layout, otherwise I'm missing the letter "ð". openSUSE should really implement Faroese into the keyboard layout options
View 4 Replies
ADVERTISEMENT
Aug 9, 2010
I have installed opensuse 11.3 a couple of weeks ago in 2 computers and both suffer of the same problem.In my asus laptop, i have a german keyboard. It is correctly recogniced as german keyboard by ev-dev, i guess. (ev-dev managed). But i need to write some spanisch symbols too, like accents (ᠩ ? hich in a normal linux, they do work. For some reason, after rebooting, or after some time of having it running, the keyboard layout resets to an invalid setup, here accents get not over the letter (?a ?e ?i ?o ?u), so i have to select my layout again in the gnome control center.
With my other computermore or less the same.Its a desktop PC with an spanisch keyboard. But i thinck i picked German keyboard during installation and now it starts always with german with some sort of 5 secs delay when setting it. I have to pick spanisch and i always delete the german layout, but after some time having it running, it resets to the previusly deleted german layout.
View 7 Replies
View Related
Jan 2, 2011
I use several keyboard layouts all the time. In all previous versions of Ubuntu I could see which one is current. After upgrade it is not showing anymore -- there is just an irrelevant picture. If I click on it -- I see current layout name -- but not other layouts. There I need to select "Keyboard Preferences" in order to see others. Because I often switch between layouts -- this simple feature is VERY important. Why it is broken in Ubuntu 10.10?
View 1 Replies
View Related
May 29, 2010
Running Ubuntu Lucid Lynx, GNOME 2.3Keyboard Preferences utilityAdding any Spanish language keyboard layout makes my Alt_R not work in ANY layout! I see that it changes Alt_R to "Iso_L..." for all/both layouts, including USA layout. When I click "Reset to Defaults" it's fine again, USA layout shows Alt_R again. I've tried all the variants of the Latin American layout and the Spain layout and they all do the same thing.What is "ISO_L..." and what's going on?i DESPERATELY need my Alt_R to work!
View 2 Replies
View Related
Dec 2, 2009
having problems with my keyboard layout since upgrade from F11 to F12. When I reboot and login into gnome I have to switch back to my layout as it has been set to USA default layout.
View 3 Replies
View Related
Jan 15, 2011
I use 2 keyboard layouts. But when I change setting from the YaST interface in KDE, setting save only for the short time (may be some hours). Then I can't switch between layouts and have to use YaST again. What is it?
View 2 Replies
View Related
Jan 26, 2010
I'm using Gnome and OpenSUSE 11.2, and my keyboard layout changes USA from Finland every time I reboot my pc. I have to delete USA-layout from keyboard preferences every time after reboot.
View 1 Replies
View Related
Feb 23, 2010
I installed open suse 11.2 yesterday stock Education edition DVD.
I changed the keyboard because it was generating garbage instead of english chars. (everything was stock from the CD)
The replacement kb is a newer one (I favor the old kb's).
eventually the language and layout of the keyboard changes - usually to Arabic or some Eastern alphabet.
I was really starting to like open suse, but if this persists it is unusable.
Something is misbehaving - any Ideas would be appreciated.
I'm running the default desktop env - gnome.
View 1 Replies
View Related
Sep 15, 2010
I am using openSuSE 11.3 and LXDE.
How can I switch between British-English layout and Greek layout in LXDE?
View 1 Replies
View Related
Dec 12, 2010
I have a UK keyboard, so I selected the United Kingdom layout on installation of OpenSUSE 11.3.However, something keeps automatically adding the USA layout, and switching to it ! How can I prevent this annoying and intrusive behaviour ? Deleting the USA layout is not enough, it seems. It just restores it again.
View 2 Replies
View Related
Feb 16, 2010
I recently switched my openSUSE 11.1 install from KDE 3 to KDE 4.4 via the one-click-install from [URL]... I was trying to add a German keyboard layout to the default US layout. But as soon as I enable keyboard layouts (via Configure Desktop-> Language & Regional -> Keyboard Layout -> Enable keyboard layouts), the default layout gets messed up (arrow, pos1, end keys etc. no longer work). I'm running openSUSE 11.1 on a Lenovo Thinkpad T61. Several keyboard layouts worked fine with KDE 3. Could it be that some KDE 3 settings are interfering with the KDE 4 settings?
View 1 Replies
View Related
Apr 22, 2011
I have 4 Keyboard Layouts and I want
Ctrl+Shift+1 for 1. Layout
Ctrl+Shift+2 for 2. Layout
and so on
is this possible ?
View 1 Replies
View Related
Jul 23, 2011
I have swapped backspace key with ` (grave) key. So I added a layout in the /usr/share/X11/xkb/symbols/us with the following lines:
key <TLDE> { [ BackSpace, BackSpace, BackSpace, BackSpace ] };
key <BKSP> { [ grave, asciitilde, dead_tilde, asciitilde ] };
Now the backspace and grave work well, but when I press shift + grave (previously backspace key), I get grave, not asciitilde.
This is strange because I tried the same thing (with the same us file) with Chakra linux and it worked without any problem.
View 2 Replies
View Related
Aug 1, 2011
I have a problem with keyboard layout and only happens with KDE applications. If I type at Firefox or Eclipse everything works fine. I already tried few stuffs like this How to enable Keyboard Layout on OpenSuSE 11.4 (Updated) but no luck so far. When I type ' + c in KDE applications I got:
ć
I was hoping ç
At Yast2 I tried: Portuguese (Brazil -- US accents) and others. Unfortunately I didnt found anything close to US - intl, US with deadkeys, etc
at console:
setxkbmap -model pc104 -layout us -variant intl (nothing)
setxkbmap -model pc104 -layout us_intl -variant intl (still nothing)
suse 11.4, kde 4, notebook hp dv7-3085dv
View 1 Replies
View Related
Mar 25, 2010
I just switched to xorg version wich has dropped HAL support. I was wondering how i can change keyboard layout as the default isn't correct. Should I add an udev rule, create a file in xorg.conf.d or can I enter the right layout anywhere in an existing config file xorg do reads that i'm missing?
View 3 Replies
View Related
Sep 25, 2010
I used YAST to set my keyboard layout to Belgium AZERTY. But my '{}@' keys dont work. [ALT]+[CTRL]....
View 3 Replies
View Related
Dec 12, 2010
Recently I faced a problem in typing in English in OpenSuse 11.3.When I try to type in English it shows me Greek letter and worse than that I think it is really Greek (not only in font) because when I enter my passwords or try to type a command in terminal I get error,I tested with UK and USA and all other English languages and I still have this problem. I even do reset in my keyboard layout setting and in KDE setting but it didn't help.
View 3 Replies
View Related
Jan 30, 2010
I have openSUSE 11.2 with default GNOME desktop and i'm facing issues with keyboard layouts, which are changing randomly. Problem is that i have GNOME in Slovak language and therefore has openSUSE set durring installation my keyboard layout to 'Slovak' but i always change it to 'Slovak QWERTY' which suits me better.
Problem is that randomly system adds back to my layouts which are 'Slovak QWERTY' and 'USA' also original 'Slovak' layout which was previously removed.
I must always manually remove this third layout and it's very frustrating. Many times on fresh system boot it's anyway back and so on and on... Where may lie the problem? Why is GNOME not respecting my settings? In Ubuntu i never have these basic issues. Are there on system boot some specific SUSE triggers which are overwriting my configuration?
View 6 Replies
View Related
Dec 3, 2009
I updated from 11.1 to 11.2. Before some intelligent person says, I should never update but do a new install: a new install isn't better, then I have other problems to tackle. And I really would like updates to work.Well, I have the following problems and I hope you don't mind me listing them all in one post *it's difficult for me to type on this keyboard layout):1. home isn't found or set up. I have modified fstab to mount /dev/sda6, which is home, but it won't mount it at startup, and also not when it's just using the disk/by-id line that had been put in.
2. the keyboard layout is american, while the system language is set to German (I'm German and would like also my keyboard to know that). I had no chance to change that, even a loadkeys de-latin1 doesn't help3. OpenOffice drives me crazy. It just doesn't start properly, or at all. It doesn't open a number of documents, but it doesn't also give any error message. Sometimes soffice.bin is in the list of processes, but OOo is nowhere seen. After killing the process (or terminating it), I can start it, but have only the opening screen and cannot really open a document.4. printing doesn't seem to work, either.Needless to say that everything worked fine before the update
View 9 Replies
View Related
Dec 2, 2010
I have a keyboard layout built in Korean language, and when i installed openSUSE 11.3 by network installation i keep keyboard layout to Korean. But after installation can't write Korean but still see Korean font in Firefox, cuz i added its font on firefox configuration settings. What shall i do? I want installed in English but still need to use Korean fonts to write something.
View 2 Replies
View Related
Mar 3, 2011
I defined a variant to my keyboard layout (Italian) editing the file/usr/share/X11/xkb/symbols/it and adding this block:
Code:
partial alphanumeric_keys
xkb_symbols "itaro" {
[code]....
View 1 Replies
View Related
Dec 24, 2010
I'm a used Ubuntu user on a pc, and I like the french keyboard layout because it allows me to type accentued characters easily.I found a win-fr keyboard layout but it's much like windows and not so good.I found xmodmap.fr keyboard layout and I'd like to know if it was possible use it with my Mac SL 10.6.5, maybe I could do xmodmap xmodmap.fr or a way to convert to mac layout file.
View 1 Replies
View Related
Nov 20, 2010
Recently i have bought a Dell Inspiron n5010 laptop and installed ubuntu 10.10. I have a windows 7 installed as well. In windows Us English Table for IBM Arabic 238_L keyboard layout works for my pc. But, i can not find this layout in my ubuntu.
View 2 Replies
View Related
Jan 9, 2010
since today's update my keyboard is acting strange. Letters e a c b f d won't come out right. They show for example e. and then I can't type anything more except the same letter over and over, until the eeeeee transforms into some weird symbol, sometimes asking me to choose between several ones...already checked languages and keyboard settings, nothing will do...
View 9 Replies
View Related
Aug 8, 2011
Yesterday, after browsing for a while, my keyboard suddenly started to show different characters than typed. The keys are just typing different letters than pressed. For example, the j displays a 1, the k displays a 2, and so on. This only happens on the x server. On the terminal, before starting the x server, the keyboard works just fine.
I'm running Ubuntu 9.10.
View 4 Replies
View Related
Feb 28, 2011
I use KDE since 4.4 so far with minor bugs, now on latest version my keyboard recuse to type the backslash '/' using Portuguese- Brazilian Layout, but the interrogation carachter '?' type fine...strange it works on 4.5, 4.4 and Gnome 2, but updating to KDE 4.6 its stopped working...
PS: I already set to Country:Brazil and Languages Portuguese and US, and in Yast/Languages Portuguese and US are set to default and secondary languages...
View 5 Replies
View Related
Jan 30, 2016
I recently built my first computer which has Debian Jessie running on it.
Everything was running great until I updated the computer a few days ago. After doing that and turning it on a few hours later, the keyboard started missing letters (as in it wouldn't register every key click) and was also typing some letters over and over again. It seems that it doesn't matter what key I press, the same problem occurs.
I tried using the keyboard on my laptop; it worked perfectly. I also tried connecting up another keyboard I had laying around and that seemed to have the same issue. Both keyboards are mechanical.
View 7 Replies
View Related
Aug 5, 2010
I have a wireless keyboard and for some reason it is typing random letters, symbols, and numbers while I am not even touching the keyboard. I tried a different wireless keyboard and that worked for awhile, but even that started to do the same thing. I plugged in a cord keyboard and that has been working fine, but I am unable to type my password if it goes into sleep mode or select my windows partition. It's very confusing and I plan on reinstalling both windows and linux anyways it's that time, but I have to figure this problem out before I do.
View 2 Replies
View Related
Aug 10, 2011
on a newly installed opensuse 11.4 x86_64 I am unable to find the settings to switch keyboard layout from english to german to french or any other language .it used to be in the system settings Keyboard-->Keyboard layouts -->> activate german btw french etc...
View 2 Replies
View Related
Jan 13, 2010
I have added a Latvian keyboard layout to my Ubuntu 9.10 system (Russian as the system language). I cannot type Latvian letters with diacritical marks. I chose an apostrophe-based keyboard layout, so that I get the letter I need by pressing an apostrophe before. For example, to get ā, I would press 'a.The problem is, when I press ' followed by a letter or space bar, nothing appears on the screen. I continue typing as normal, but each time I press an apostrophe, the next character I press displays nothing on the screen. I have tried installing a Latvian language pack through System -> Administration -> Language Support. It was generally a useful addition. But it did not solve the problem. I still could not type Latvian. After that, I tried removing the Latvian layout from settings and adding it again. It did not help. I tried removing the layout, restarting my computer, and adding the layout back. The problem was not resolved.
I have tried different Lativan layouts (with tilde, with F, and standard). I had the same problem regardless of the layout I used. I browsed dozens of forum threads, and in one of them I found a workaround for this problem. For example, to type �, I hold down Shift and Control together, and while holding them press u0160 (because 0160 is a hex code for � in the character map). The first 0 is not significant, so to save time I type u160. I looked up the hex codes for the letters I need in Applications -> Accessories -> Character Map. In that application, at the bottom of the window, for each letter there is a code U+(four hex digits) e.g. U+012A. I wrote out all the codes I need on a small paper slip and stuck it to my monitor.Entering symbols this way is rather inconvenient. But at least it is possible.How to enter Latvian letters using just a Latvian keyboard layout? Is it a bug I should file? Would be great to find out.
View 4 Replies
View Related
