What is the best client application for connecting through PPPoE (DSL connection)? Gnome's default network manager isn't very useful. I created a DSL connection but don't know how to use that.
View 1 Replies
I'm trying to setup PPPoE connection to establish my DSL connection, but I got
Code:
pppoe[3885]: read (asyncReadFromPPP): Session 4479: Input/output error
pppd[4104]: Cannot determine ethernet address for proxy ARP
in my sylog file.
When I do pppoe-start, it connected but I cannot ping into any destination (even to my modem in the same network). DNS servers are explicitly set in pppoe.conf and resolv.conf. Did I miss anything?
i m new to ubuntu i want to create a pppoe client with a service name. i used to create it with pppoeconf but it is not asking me for the service name. i went to /etc/ppp/peers then i typed gedit dsl-provider. i opened the file
[code]...
i put in the bottom servicename="ROG". when i pon dsl-provider it said unrecognized option servicename. i put in the header of the file this line : pty "/usr/sbin/pppoe -I wlan0 -T 80 -m 1452 -S ROG". nothing changed i still cant connect.
Does anyone know of an application other than NetworkManager that will allow me to connected to WAN via PPPoE over WLAN?
View 4 Replies View Related1st, i managed to make a VPN connection to my server and after a reboot i get this:I've tried everything that google gives me with "ubuntu vpn service failed to start pptp" search terms.2nd, I've got a DSL connection (PPPoE) to the internet. When i connect it, eth0 looses it's ipv4 ip (I've disabled ipv6). How can I keep it?
View 1 Replies View RelatedI have just installed FC11 from a DVD I created from an ISO.I also have FC10 (using here) and Windoze XP pro all on separate HDDs.I have not been able to configure my internet connection, when I try to create a new xDSL connection I get an error message; package needed 'rp-pppoe'.I don't now how to get the package without a connection.I have tried with and without Network Manager.
View 2 Replies View RelatedI've just done a fresh install of Ubuntu 10.04 lucid lynx and how to setup a pppoe connection in ubuntu. ( thats after 2 hours of googling and trial and error)
system info: its a laptop : Dell Studio XPS 16 connected to a Ethernet hub thats connected to a dsl modem..
i am completely new to the world of Linux. But i want to learn it. My problem is , i cannot connect my PC to internet. I have a shared broadband connection which needs username and password to connect to internet. I don't know clearly but its something pppoe connection through wan mini port. or xdsl. I contacted my isp but in Our country (Bangladesh) a very few people use Linux or Ubuntu so they cant help me out. i searched many forums,, googled everywhere but cant make it working. i tried some command like "sudo pppoeconfig" but still dont understand. I know there are many people who know how to do this. My Pc configuration:
Processor: Intel Core2duo E8400 3.00GHz
Motherboard: Intel DG41TY
Ram: Transend 2GB 800 buss
Hdd: Samsung sata 400gb
Lan: Realtek PCie GBe family (built-in)
Ubuntu 9.10
I have Fedora 13 also. It looks almost similar to ubuntu at network connection.. is the settings will be the same.
i need help to create a PPPoE Connection ( Breoadband)using RHEL 5 cz my ISP use this type of connection .Plz if there is someone can show me the procedure step by step.
View 3 Replies View RelatedI have wireless adapter USB rt1878 working fine.I have to setup pppoe to make internet connection?I need this help?
View 3 Replies View Relatedhow to make pppoe (ADSL) connection on fedora 12
View 2 Replies View RelatedI have wireless adapter USB rt1878 working fine.I have to setup pppoe to make internet connection?I need this help?
View 1 Replies View Relatedi have setup my connection with pppoeconf command ...i had not started it at boot time..i make a script like this....
Code:
#!/bin/bash
echo "Connecting"
[code]....
My adsl modem is in bridge mode. I can connect to internet via pppoe . pppoeconf recognise the pppoe in eth0 and setup a connection and I can use it. How can I setup a pppoe connection using pppoeconf so that it uses wireless ? I set the wireless mode to bridge in modem settings. But, after that the access point stopped appearing in "aps in range" in network manager and I can't connect to it. pppoeconf also doesn't recognise wlan0 as a valid pppoe link . but dat is normal since i don't think it can check if wlan0 is pppoe without wlan0 being connected to the modem's wireless network. How can I connect to Internet with modem in bridge mode and connections via wireless interface of modem? Is pppoe over wireless even possible ? coz the datalink layer of wlan is not ethernet rite?
View 6 Replies View Relatedi have a routed and a PPPoE type internet connection, recently i tried a thing in terminal with the pppoeconf option since the network manager has problems with connectiong to the internet with a pppoe DLS connection, or anyway in my case it does not work. Ok i did the pppoeconf thing i inserted my pass and my user and left the program to do its thing, ok it all worked fine but then i restarted my system and suddenly the network manager did not want to recognize my network it hat as options some weird ipupdown options for connection and when i tried the pppoeconf thing again it did not work. what could i do to reactivate at least one way my connection, if i understood correctly the terminal type connecting and the network manager are two different things. now i am using my router and it should connect but the network manager still does not see the connection.
View 3 Replies View RelatedI want to create a broadband connection in suse 11.4 , in the windows the connection Properly works but in suse ...i recently installed qinternet , it runs the dsl connection , and shows this massage : " connected , connection established " , but no internet
View 14 Replies View RelatedI've been trying to use gnome-schedule to create a scheduled task that would dial my pppoe connection automatically. For this I used "sudo pon" command (after configuring the pppoe connection using pppoeconf ). Although the command gets executed, but then it waits for me to enter the password. I want it to be automatic & shouldn't require me/anyone to authorize it. Is there a way to enter this password automatically for the scheduled tasks?
Also, I'd like to use network manager, instead of pppoeconf, for the same purpose. How can I set network manager to dial a pppoe connection at scheduled time?
I am deployed to Iraq and the Earthlink ISP here uses PPPoE to configure a connection to their wireless broadband. His english skills are pretty good and from what I gather, he's got a DSL connection that he's trying to connect me to. He showed me how he does it on a Windows machine but I can't figure it out on my ubuntu laptop. That windows machine didn't need any IP addresses or server names. It only used a username and password to connect. Of course a strong wireless signal detected was also pre-requisite.
I know my laptop works because I've had great success with it here lately, just not on the Earthlink service.I see their wireless is broadcast and I can connect to it. I just can't figure out how to post my credentials and authenticate.I don't see a way of entering my username and password because I don't know how to install (or configure) for PPPoE.I did use the pppoeconfig and got to the part where I add my username and password, but most of what's going on up to and after that, I do not have the knowledge base to use. So I figured that allowing the defaults and recommended settings would be acceptableYou'll have to forgive me if I've asked another dumb question here. I'm another one of those Linux enthusiasts who is learning and I'm just not willing to switch back to MS just to get internet while deployed.
I have an internet connection which requires pppoe setup to login with the specified username and password ip address is dynamic.Above are the screenshots for your reference for which I establish the internet connection.the pppoe settings can be done through "sudo pppoeconf" but for the screenshot No. 2.what is the procedure? I need to specify the service name for my internet connection.how to configure my internet connection.
View 8 Replies View RelatedI cant get my wired internet connection to work. The command 'dpkg -s pppoeconf' returns ' installed ok installed'. My connection is through a router which is probably in a semi-bridge mode and I need to dial a connection to get the net started. The connection Auto eth0 is setup properly with the correct cloned MAC Address (that of my laptop).
I've also executed 'sudo pppoeconf' and ran the whole series of steps which towards the end said that my connection will be set on boot. However, the net doesnt work directly and I dont know how to dial manually either. 'sudo ifup eth0' returns 'interface eth0 already configured'. I tried some 10-15 threads but none worked. Ubuntu is handicapped without internet.
I'm trying to configure Iptables and I just want to block everything but http/https. However, my connection is pppoe, so I have the ppp0 interface. Pretty much every Iptables tutorial that I found don't teach how to deal with this kind of setup. I'm forwarding the ppp0 to eth0 and I could configure the input rules and they're working. After this, I need to configure the output but nothing seems to work.
The current working rules are:
Code:
Chain INPUT (policy ACCEPT 7858 packets, 5792K bytes)
pkts bytes target prot opt in out source destination
299 201K ACCEPT all -- any any anywhere anywhere state RELATED,ESTABLISHED
0 0 ACCEPT tcp -- any any anywhere anywhere tcp dpt:www
0 0 ACCEPT tcp -- any any anywhere anywhere tcp dpt:https
11 820 DROP all -- any any anywhere anywhere
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
0 0 ACCEPT all -- eth0 ppp0 anywhere anywhere
0 0 ACCEPT all -- ppp0 eth0 anywhere anywhere state RELATED,ESTABLISHED
Chain OUTPUT (policy ACCEPT 10791 packets, 1951K bytes)
pkts bytes target prot opt in out source destination
I don't understand what those "state RELATED,ESTABLISHED" rules do. Also, I don't know if this rules are secure, because i'm very confused about the ppp0/eth0 interfaces.
I`m trying to establish pppoe connection from Linux clinet to Win server.
I get in ppp.log message:
As I see in this log server gets IP address to client but after connection terminates.
How can i add a PPPOE connection witch connect automatically on system start up in text mode in centos 5.4
View 3 Replies View RelatedI have this strange problem. I can't setup my PPPoE connection through the kPPPoE. My ISP told me that this PPPoE has something like name server or something like that and i must use some other package to connect.
View 3 Replies View RelatedPPPOE connection Timed Out-i have downloaded the rp-pppoe utility and installed for PPPOE connection.As per the instruction given with the utility i followed that .i have given pppoe-setup and given all the parameters required like service name , username ,password,firewall as none ,dsn as server an all the option .finally i got the message as congratulation you have successfully setup the pppoe connection.you can use pppoe-start and pppoe-status.
View 11 Replies View RelatedI have a number of Ubuntu machines running. Our NAS is FreeNAS. I am typing this on an Ubuntu 10.04 desktop that is successfully connects to an NFS share on the FreeNAS box every day. In addition, we have 3 10.04 server machines that also stay connected to the share successfully, Yesterday, I installed a new 10.04 server machine using IP 192.168.0.11. Everything works except connecting to the NFS share. It always returns with: mount.nfs: mount to NFS server '192.168.0.13:/mnt/amrd0s2/public-NFS' failed: timed out, giving up
Here's what I have checked: I can ping 192.168.0.13 (obviously) The NFS export mask is set to 192.168.0.0/16. The other machines are all on the same subnet as this problem machine (192.168.0.*) nfs-common, nfs-client, and portmap are all installed and running correctly. portmap is running correctly showmount -e 192.168.0.13 give the proper response:
Export list for 192.168.0.13: /mnt/amrd0s2/public-NFS/ 192.168.0.0 iptables isn't even installed (these machines are segregated in a private network behind a hardware fire all) There is nothing related to NFS is any of the syslogs. dmesg has one entry: [6.025966] FS-Cache: Netfs 'nfs' registered for caching which is insignificant. how to at least debug the nfs-client short of downloading the source and actually stepping through the code.
I was wondering if there was a way to connect over ssh "backwards". For example, lets say there's a client connected to example.com via ssh from behind a router. Well you wouldn't be able to ssh to that client unless the proper ports were forwarded on the router right? So I'm wondering if there would be a way to connect to example.com through ssh then from there connect to the client using the already existing ssh connection.
View 4 Replies View RelatedI have an ubuntu 7.10 ICS server that works fine and I have routed my traffic using firestarter to my windows PC. my server's IP is 192.168.0.1 and my windows client is 192.168.0.2. now, I have bought another PC and I want to assign 192.168.0.3 to it and connect it to ubuntu server. in windows, all I needed to do was to connect the first client to first network card, second one to second network card, bridge two connections in my server, assign 192.168.0.1 to the network bridge in my server and 192.168.0.2 and 192.168.0.3 to my clients, then share my internet connection. I also could access shared files in any computer from all of them. can I have the same functionality with a linux server?
I'll make a list to make it easy if you don't wanna read the whole post:
things I want:
1. assign one ip address to multiple interfaces in linux, making them bonded.
2. sharing the internet connection with both clients.
3. ability to use all shared files over a network.
I would like to know how to configure a pppoe connexion? I am testing version 11.2 on live cd but I can't manage to connect my laptop. I used the "green plug software", I filled all the blanks (I am not a total beginner because I have been using Mandriva for a year) but afterwards I can't select pppoe instead of eth0 What should I do?
I read on this forum NET INSTALL PPPOE - Alionet, communaut francophone d'entraide openSUSE et SUSE Linux that the only reason that I can't configure a pppoe connexion is because I am using a live version of 11.2 as result that it only recognizes an ethernet connexion and a modem (everything I said, is said in the forum I linked, but you'll have to read it in french )
I try to configure a pppoe connexion to Tl2, my internet connexion provider. I live in France. My modem is a Bewan ADSL ethernet 100, no need to configure it.
I have a Compaq Presario CQ61, instaled Ubuntu 9.10 and Windows 7 on it.
It works great except the PPPoE connection in Ubuntu, when i dial in Windows my download speed reach up to 91 Mb, rebooted in Ubuntu, downloaded same file from the same server with a speed of maximum 3 Mb, cheked in Windows again 80 - 90 Mb constant. I can't figure what slow's the internet connection in Ubuntu.
(NO iptables configured, NO HTB, CBQ ...etc configured) .
EDIT: I don't have any modem or router. I am using PPPoE directly from my PC. I didn't mentioned that I instaled Ubuntu two times but didn't figured out what was causing the problem, so I instaled Fedora 12 (64), this works fine and the speed reached 85 Mb. I instaled latest Ubuntu 10.4 on the same Laptop, the problem is not solved, the speed reaches up to 3Mb, when in Windows or Fedora reaches up to 95 Mb (yesterday).
