I need to work with other computer. How could i make it? Should I use SSH over VNC, or?... There is a lot of information about it, but, maybe, too much information. I just need to connect to my other desktop. In win i've used TeamViewer. What should i use here?
I have a Debian VPS running Lenny and I'm trying to setup a way to run remote desktop sessions from it. I went with FreeNX, NX client for windows from nomachine, XDM and xfce4. All seems to have installed well, but I can't start an NX session on my box. I can connect to the server and authenticate, but the client hangs on "Downloading the session information," eventually timing out. The log output is below - I'm not even seeing an error message. Any ideas?
The only thing I noticed during install, which was about 400 packages since this was a barebones VPS, was that I should consider recompiling the kernel with CONFIG_SOFTWARE_SUSPEND=y. I don't know if this has any impact on session information, however, since this is a new session, not one I'm trying to resume.
I have a problem with my Terminal Server Client, I cannot seem to connect to any windows server via IP address. Can anyone please recommend any tool I could use to connect? I need to work on the server for admin interfaces example Admin Kits for workspace protection
I'm working on getting a Debian box up and running for training labs for Cisco, and would like VNC access to this Debian box. My main laptop is a MacBook Pro, and I have a Windows 10 desktop.What the problem is: Using the MBP's built-in VNC viewer, I receive a "Connection failed to "Server" Make sure Screen Sharing or Remote Management is enabled on the remote computer. using Chicken (of the VNC), I receive a "The server refused the connection".I'm using tightVNC as a server on the debian box. This is a fresh install of Debian.URL...
I have an iMac with OS X and Windows 7 on it. I can use screen sharing through the Finder in OS X to view my Ubuntu desktop (it's on an old emachine in my loft) by default. How can I view and control my Ubuntu box in Windows 7?
In my company we all using ubuntu os. For my ERP i connected windows 2003 server through remote desktop connection. Connections are working properly. But i have to configure for print. I have printer connected with my windows xp os. I have to give print on 2003 server via remote desktop connection.. and i want print out on my local windows xp machine. How i have to configure...
I am trying to connect to my Company network through VPN. I use a Lynksys router which is most likely not the problem, as I can get the VPN and Remote Desktop to work from a WinXP Pro laptop connected to the same router. I have tried several RDC clients, none of them establish a connection. The VPN connection is active, I can ping and Traceroute to it , but I cannot get the RDC to work. The RDC should connect to 188.8.131.52 on the company network.
How do i set up a remote desktop connection from my Windows 7 machine to a SFTP server im trying to set up running on Fedora 10.Ive installed vnc server on fedora, and tried tightvnc and real vncviewer on windows and i cant get it to connect. Im not sure how the firewall works in fedora, but ive added the port to the "other ports" section of the firewall. On the windows firewall ive also added the vnc programs to the exception list.
i have installed ubuntu 9.04 and desktop xubuntu. i want access the sever from my windows xp using either rdp or vnc. i am able to use the ssh but thats only command line. i need the gui desktop. i have installed x11vnc,tightvnc etc. but whenever i try to connect from my vnc manager,its giveout error.machine actively refused it. i havent configured any port or anything like that.
Does anyone know what could be causing a Remote Desktop connection to a 10.04 box to be closing after some period of time? I have three systems all running 10.04 with Remote Desktop enabled. I'm using UltraVNC on Windows 7 to connect to them. If I open a connection and leave it open for a long time (like overnight, for example), when I come back in the morning, I still see the VNC window but as soon as I click on it, it closes. I can immediately open a new connection to the box but it now shows two active connections. At first I was thinking maybe there's an idle timeout value but given that Ubuntu still seems to think that the original connection is active, maybe the problem isn't on the Ubuntu side but on the UltraVNC side?
how i can get remote desktop to work on a outside Internet connection i can get it to work on my router but my brother cant access it from his pc i have vnc view on his pc but ever time i try to connect from his pc it keep saying cant connect any idea how i would fix this i have the firewall on my lunix system turned off
If you do a search on the web you can find where to download Microsoft's Remote Desktop Connection 7 client (rdp client). To get it to work under Wine (I used Crossover Office) actually was pretty simple. You will need to copy four files from an existing Windows 7 system. Two of them, mstc.exe and mstscax.dll are located in the C:WINDOWSsystem32 directory. The other two files, mstsc.exe.mui and mstscax.dll.mui, are located in a subdirectory within C:WINDOWSsystem32.
The name of the subdirectory will depend on the language and locale of the Windows system you are using. If your language is English and you are in the USA, they will be located in C:WINDOWSsystem32en-us. Copy those 4 files to some temporary directory on your Linux system. Next create a new Wine Windows XP "bottle". Use either Crossover or Wine to browse to the SAME wine C: drive subdirectories as on the Win7 PC (see above) and copy the respective files into each subdirectory in your Wine Bottle. Two files each into 2 different directories.
Next using either Crossover or Wine execute the RDC 7 application. wine mstsc.exe In Crossover you can just click the button the RUN a COMMAND and just enter "mstsc.exe". The RDC login screen should appear prompting for a Server address and a login ID. You can also change various other "options". I have not tested alot but it does seem to work pretty well so far.
Im using Ubuntu and i need help dose anyone know how i can get remote desktop to work on a outside Internet connection i can get it to work on my router but my brother cant access it from his pc i have vnc view on his pc but ever time i try to connect from his pc it keep saying cant connect any idea how i would fix this i have the firewall on my Linux system turned off.
I was working on my desktop under Ubuntu 9.10 when I got a message in the the upper right telling me that my Remote Desktop Connection had been activated. I don't know who it was, but they proceeded to open up a terminal and start typing a bunch of stuff. This scared the living @#$^ out of me, so I didn't really pay attention to what he was doing and immediately dove for the reset button. I disconnected my network from the web and found that RDC was NOT password protected.
Now, I probably did this a little while ago while I was playing around with it, but I also set up an account with dyndns.org. Would this possibly increase the number of attacks on my network? Just in case, I have removed my listing. Also, would any of this incident be logged somewhere? How/Where would I look to see if I'm being poked and prodded for another security hole?
My home linux box is behind a Linksys WRT110 router. I have enabled the Remote Desktop from System-->Preferences-->Remote Desktop. I then run TightVNC from my WinXP box. As I wish to run a secure connection, my first obstacle comes from PuTTY. In PuTTY, my settings are as follows:
Host Name(or IP address) Port xxx.xxx.xxx.xxx 22 SSH-->Tunnels:
I recieve "Network error: Connection refused" I have gleened all of this information from other boards and tutorials. I know there is something critical that I am missing.
Is there a way gnome can allow a remote desktop / VNC connection if no user is logged in? If the server gets rebooted I can't access it (remote desktop / VNC). Someone physically has to go there and log in. Surely there must be a way as gnome is running just waiting for a login.
I have recently installed fedora 14 and configured vpn to access my work network. I need to access some windows machines which although I can ping I cannot remote desktop into. When I go to Applications>Internet> Remote Desktop Viewer and put in the machine name (either just the machine name or the FQDN including the domain name) I get an error "Connection to <machinename> was closed".
I would like to set up a remote desktop connection between two computers over the Internet. I already tested remote desktop within a local network but it's far from secure enough this time. I will try to follow this guide [URL] (ssh portforward and internet). This still leaves ufw and how it should be configured. Let's say I have this setup, server computer has ip 12.341.245.124 and the client has 78.12.543.234 how should ufw be configured to be secure? This remote desktop wont be connected to a local network
Windows 2008 R2 running on VMWARE, workstation 7.0, host machine is Ubuntu 64bit, latest release. Have clients connecting via LTSP using Remnote Desktop Connection. I tried several options for RDC like -a 16 for 16 bit graphics, but to no avail.What can I do, to have a better Remote Desktop environment? One thing I have not done, is install the Xserver Via Chrome Custom X server on the LTSP server?
I'm using slackware 13.1 and I have a problem to accept remote access to mysql server.The steps I have followed to do that thing are:vi /etc/my.cnfline skip-networking is commented bind-address my_ipaddressI opened the port 3306 of my firewallAlthough I can connect locally, i.e. mysql -u a_user -h localhost -pI can't do it remotely i.e. mysql -u same_user -h my_ipaddress -pI have also turned off my firewall, but nothing.telent 3306 my_ipaddress results in: telnet: connect to address my_ipaddress: Connection refusedMy my.cnf file is:
Is there any way to do remote desktop from Mac (Snow Leopard) to Centos 5.5?I have turned on remote desktop in Centos and got the address ([url].....) to access remotely. Then I installed vnc-Viewer in my Mac. Put the address like (mypcname.com:0) then clicked connect. I get error message "Failed to connect: Operation timed out (60)".My Mac and Cenotos is in the same network.
I want to remote-desktop into a windows box that happens be hooked up to a linux server.The linux server uses a static IP. I've already enabled remote-desktop on the windows machine, but am wondering what I need to do server-side to make the server's ip forward to the windows machine. I know this can be done with iptables but I'm not sure how to work it.
How to setup my server to use it remotely from my Home from a WindowsXP PC.I want to access my CentOS server. Please help me installing GUI or Remote desktop on my server.I have installed FREENX client on my WIndows XP PC now what next to do. what configuration do i need to do.If you have any link to tutorial please let me know.