Ubuntu :: Unable To Login - After Installin Kde Desktop Environment
Aug 15, 2011
I have installed ubuntu 10.10(gnome desktop environment),in my laptop..everythin was workin well for the past two months...recently,i added kde plasma desktop environment,via ubuntu software centre..now,when i try to log into ubuntu,there is an error message stating "gnome power manager have not been installed correctly.please contact your system administrator",on the topmost right edge of the screen...i tried various commands like,
But,nothing has solved my problem..many suggested that it may be due to low drive space..but i cant use the mv commands too..really,i'm so helpless and its been three days,after usin my laptop..
View 1 Replies
ADVERTISEMENT
Mar 19, 2011
My ubuntu 10.10 desktop environment freezes at right after login, with the window prompt to "unlock keyring" in the foreground. The cursor still can be moved around the screen with the touchpad or mouse. Mouseover of Docky elicits the usual animation but there is no response to clicking it. There is no other response elicited from moving the mouse over or clicking anything else on the screen, including the taskbar and the hot corners i have set up. However the screen still goes dim and to sleep when left unattended and can be reawoken. The netbook also still recognises when it is plugged into a power source.
Background info: I have been dual booting windows 7 starter and ubuntu 10.10 desktop edition for about 2 months now on my ASUS eeepc1005pe netbook with no issues till now. The problem only started when i booted up into windows 7 starter without having shut down ubuntu completely. My netbook was hibernating when i mistakenly chose to boot into win 7 starter at the bootloader. Now this freeze happens every single time i try to boot into ubuntu. But i am still able to boot into win 7 starter without any problems.
The same sequence of events occurs each time i try to start ubuntu. The boot goes fine, then the automatic login occurs, then compiz loads fine then my desktop environment appears with all the same windows and programs open on the desktop as the last time i had managed to use ubuntu except that the keyring login prompt appears in the foreground and then everything freezes as i have described.
View 6 Replies
View Related
Apr 6, 2011
I have my work PC in the office, and time to time I access it via TeamViewer from home. I have access to it also via ssh, over the VPN connection. I have problems with this setup, when for some reason the work PC must be rebooted (or it just happened by itself - power failure). The Ubuntu gets to the login screen and that's it. I can not access it remotely because the TeamViewer application is not started on that PC yet. I'd like to know, if there is a way how I can access my work PC over the VPN connection - open SSH session, and write some commands, to log in that desktop environment user, and launch the TeamViewer application. Ie, if someone would be looking on the screen at that moment, she would see that login screen disappears, desktop environment is loaded, and the TeamViewer app is started.
If that's not possible, then, I guess, I'll have resort to some alternative remote access tool (ie, VNC) what could be loaded before the Ubuntu login screen is shown. Then I could access it over the VPN connection, using appropriate client.
View 1 Replies
View Related
Jan 29, 2011
I just installed Ubuntu 10.10 and when I try to log in to the regular desktop environment, only the backsplash coloring is there. I can, however log into safe mode and see the GUI there. Occasionally, I will get the treat of using the regular desktop environment, but it will ultimately freeze, and if I go to a different runlevel and restart gdm, the same thing happens....only backsplash. Here's what I've looked into, all of which has failed by the way: gdm.conf, URL... even though that "fix" was for an earlier release, and of course reinstalling a few times. *Sigh*I'm running it on a Toshiba Satellite L25-S1217, Intel Celeron, 874MB RAM, and 60GB HD with the stock Radeon graphics card.
View 14 Replies
View Related
Aug 27, 2010
I have just installed Fedora (13) for the first time. It's great ! So thanks to all its developers !
I managed to do many tweaks I wanted to, in no small part thanks to this forum, but here's one that eludes me and my google-fu.
I'd like to customize the login screen (if I grokked correctly, that's gdm). I already saw how to change the background or how to enable automatic login, but what I'd like to do is this :
1. Disable that rather annoying "pong" sound when I select a user,
2. Set a default desktop environment. Gnome seems to be the default environment selected in the drop-down menu, but me, I'd like for it to be XFCE.
View 13 Replies
View Related
Nov 15, 2010
I am using fedora 10 and I was downloading F14 by torrent. By 90 % I stopped it and shut my system now when I am going to turn on my pc unable to login my kde desktop. I am getting some message like this
Code:
/: Contaisn fail of a file system withe errors. check forced.
Unattached Inode 1440243
/: UNEXPECTED INCONSISTENCY RUN 'fcsk' MANUALLY
[FAILD]
Run 'setenforce 1' to reenable
I think my s7stem currupted but I am unable to rescue as I did last time.
View 7 Replies
View Related
Sep 11, 2009
I'm running a Dell D630 laptop that uses the onboard intel i915 chipset for both audio and video. This is in a docking station that's connected up to a larger monitor. The laptop boots just fine as it has been for quite a while now. I get to the login prompt, enter my credentials and then after pressing enter and it looks like it's going to load my profile, the wallpaper updates but then the screen goes black for a moment and I'm then brought back to the login prompt again. The system is up on the network so I was able to ssh into it and capture the following from the logs during a login attempt.
Sep 11 08:03:27 jdesilets kernel: [drm:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
Sep 11 08:03:27 jdesilets kernel: ------------[ cut here ]------------
[code]...
View 10 Replies
View Related
Jun 6, 2010
I installed Gnome desktop environment recently then ;I' ve lost KDE desktop effects settings. I just can see Compiz Configirator. I cant configure effects independently. There is same settings in gnome and kde. And also I cant change windows appearence.
View 4 Replies
View Related
Jul 20, 2011
a server at work has been accessed through the desktop environment as root. I know this is a risk and since I have never done it before I was wondering if there are any files created by the desktop that could compromise the system and how could I clean it up.
View 2 Replies
View Related
Dec 5, 2010
i enabled gnome desktop effects ignor the warning and now i am not able to login to genome dektop. 1.how to disable desktop effects by commands. ALSO sometimes i get this error could not update ICEauthority file /var/lib/gdm/.ICEauthority. 2. how to solve this bug.
View 2 Replies
View Related
Aug 28, 2010
In installin application from rpm packages...
View 4 Replies
View Related
Jun 4, 2011
A couple days ago the update manager alerted me to a series of updates that were needed so I installed them. I didn't try printing anything until the next morning to find that both of my network printers were GONE! I went to add them back and they installed just fine but any time I try to print I get "Not Conencted" errors. But if I navigate to the printers directly (they both have web interfaces) they are fully functional and print just fine (self test print samples). Ubuntu 11.04 can see the printers when I search the network. I have tried CUPS and the Preferences/Printer/Add method and both add the printers just fine and let me do any type of configuration except I can't print.
I am not sure what was updated that might cause this type of thing. What can I do? Printers are both Brother network enabled printers and have worked 100% perfectly until the last update.
View 1 Replies
View Related
Jun 19, 2010
Didn't see a guide on this on the wiki. Correct me if I'm wrong and feel free to add some tips. (Keep in mind that I am a total beginner with Linux)This computer comes with Windows 7, which I seek to wholly replace, not partition. More info on the computer can be found here-Download Squeeze Installer (don't know which source to use or if I'll pay for a Live CD or Live DVD)-Install Debian Squeeze-Restart computer-Set up Squeeze/KDE-Use Squeeze-Compute happily ever afterJust have to ask, what do I do about about wifi connectivity? It seems that certain Aspires have trouble connecting to wifi when Debian has been installed and I really need to be able to use the 'Net with my lappy. Where would those drivers/firmware be found?
View 12 Replies
View Related
Nov 25, 2010
what best desktop environment for a pentiun iii 1GHz, 256 Mb RAM and 64 Mb of video card. Like Gnome, KDE, Fluxbox, Openbox, Blackbox, XFCE or other, don't care if have or not menus or docks, I need it became fast and can see videos not in slow-motion.
View 4 Replies
View Related
Jan 12, 2010
Now I know this is an Ubuntu forum, but my question is really for Linux distros in general. An obvious newbie to linux, I was just wondering if I could change the default desktop environment that comes with distros: for example Ubuntu comes with GNOME. There is a way to change that to something like, for example, xfce or Openbox right? Or are these environments set for each distro?
View 1 Replies
View Related
Apr 19, 2010
I have a shell I have written in C# for Windows. I have ported it over to Linux (Ubuntu) and it works well as an app running under Gnome.
What I would like to know is how to use the shell I have written instead of Gnome? What I want is a way of booting straight into my custom shell without the default desktop environment loading.
View 7 Replies
View Related
Apr 24, 2010
I am a different distribution Linux user but considering to install Ubuntu Server 9.10 to run my personal website.
Question about Ubuntu Server version - does it come with some desktop environment like Gnome or KDE? I would be running Ubuntu Server on my home machine so it would be a nice bonus if I could use it to browse internet or check email.
View 9 Replies
View Related
May 6, 2010
I know you can install the Kubuntu desktop in ubuntu via synaptic. But as many of you well know this also installs a whole bunch of KDE programs and such like. Is there a way just to install the desktop environment?
View 7 Replies
View Related
Oct 26, 2010
I just updated today my ubuntu from 10.04 to 10.10. All worked ok until I rebooted my computer. After that, it showed me the terminal window instead of the desktop environment i had. I tried to reinstall ubuntu_desktop, but nothing.
View 2 Replies
View Related
Nov 5, 2010
I recently upgraded from 10.04 to maverick(desktop edition). the problem is my netbook edition environment is not working properly.. can any1 tell me how to reset/reinstall the packages for netbook environment?
View 4 Replies
View Related
Nov 29, 2010
Instead having a large desktop environment why dont we use the desktop environment from plan 9.
View 2 Replies
View Related
Jan 28, 2011
Last night I upgraded to Ubuntu 10.10 and ran into some problems. I can only work in the desktop GUI in safe mode, the regular Desktop environment loads up rarely. Here is some hardware info:
Toshiba Satellite L25-S1217
Intel Celeron 1.6 GHz
RAM 874 MiB
Available disk space 47.5 GiB
Now, here is the dmesg output....notice the errors at the bottom (Idon't know what they mean, but I suspect that xwindows is having trouble mounting)
[Code]....
View 1 Replies
View Related
May 13, 2011
I'm running a regular installation of Ubuntu 10.10 with Gnome.I would like to try LXDE and other desktop environment,BUT without installing the entire Lubuntu.Last time I tried something like that,I installed the kubuntu-desktop package which came with a ton of software I didn't want.I couldn't even remove it easily, so I followed a tutorial which made me remove some of the software I had BEFORE messing with KDE.So what I'm asking is simple-is there a standalone package that installs nothing but another desktop environment? I also want to be able to remove it with a simple apt-get remove.
View 1 Replies
View Related
Jun 18, 2011
I have an older IBM P3 laptop im running ubuntu on. And im wondering if there's a way to change the desktop environment to one which would use less system resources. Im currently running the default. I've used other distros way back in the day that would allow you to use KDE. Can KDE be installed and would this be a better option for an older computer?
View 6 Replies
View Related
Nov 24, 2010
how to to setup a PXE boot environment. The server contains a LUbuntu 10.10-installation the client is Ubuntu 10.10 Server (I didn't mix up those two...) So, everything is going fine; the client gets an ip-adres, and boots over PXE. The login-prompt is shown. Problem: I can't login. It seems my users are deleted (better not copied). Of course the system (client) works fine when I boot the system from it's harddrive. The only thing I can guess, there going something wrong with:
[Code]....
View 1 Replies
View Related
Jan 6, 2010
According to the Wubi FAQ one can "select the desktop environment within Wubi" - does this mean that after installing Ubuntu using Wubi, once can opt to log in with KDE etc. each time? Or do they need to be installed separately?
View 5 Replies
View Related
Feb 8, 2010
I recently had to get a new PC, I am left with one that while it doesn't do what I needed to, still works just fine so I would like to turn it into a barebones file server. I could do this under Windows, I have an old copy of W2K server install I got from my networking class... but I'd rather do it via Ubuntu.I know there are automated install options but I can't figure out how to make use of them. All I need to have it do, is on install:Install X11 as the desktop environment (lightweight, resource friendly).Install VNC to allow me to remotely administer the server and fine-tune any configurations Setup up the NIC so I can obviously network it.
If there's a way to strip off the extra programs (ie: games, office software, graphics editors, etc), that'd be fine. I'm unsure if I want to do any media streaming (specifically of music, unsure if the onboard graphics is suited to video)I don't have a spare monitor to hook this up with, and I want to stash this machine in an out-of-the way place where it won't be noticed.Can anyone help me or point out an 'idiot's guide to automated installing Ubuntu' by any chance?
View 1 Replies
View Related
Jul 22, 2010
how do I stop 10.04 automatically going into the desktop environment?I want to be able to select command line, or gnome, or lxde
View 2 Replies
View Related
Sep 29, 2010
For some reason when i booted up today i got the message: "You are not running under a composited desktop-environment. The Desktop Art Plugin cannot work without one."
Any Idea what this means or how I can fix it? it has stuffed around with my conky positioning too for some reason. Im running Ubuntu Lucid 10.04 with Gnome DE
when i do a screenfetch is says - 'Finding desktop environment...found as 'GNOME'[URL]..
View 2 Replies
View Related
Oct 24, 2010
I have been using Debian desktop environment for years. There, I can sudo init 1; do maintenance; exit to desktop environment again. But when I `resume' from Ubuntu-10.10's maintenance mode, I can just Ctrl-Alt-F1 to login and there seems not an interesting process running.
View 4 Replies
View Related
