How can I turn off the Authication Password when installing new hardware. I am the only user and only download from trusted sites but I'm continually asked to authenticate with my password.
View 5 RepliesI just did a standard install of Fedora 12 including the specification of a root password and a user ID/Password.
When Fedora starts, it accepts the password for the user ID but it shows an authorization failure for the root passwword. However, in a terminal session the root password is accepted when I enter the "su -" command.
How do I get the Gnome Desktop to accept the root password?
Related to this is an interesting security issue when I use the "su -" command to switch to the root user in a terminal session. Apparently, I do not get full root privileges as far as Nautilus is concerned. Nautilus loads but has a very restricted range of files/folders. It won't let me access "Computer" so that I can drill down through "Filesystem", etc. In contrast, Gedit run from the terminal will allow editing of all files after I enter the "su -" command in the terminal window.
I have run "yum update" to install the latest version of all packages but nothing has changed. I'm downloading the DVD image of Fedora 11 but I hate to do a another total Fedora install if I can avoid it.
I am running Ubuntu 10.10 in a VM and I want to disable ALL password prompts.
I understand ALL the security risks, and I accept them.
How to turn off, that Ubuntu ask for password after a while? For example, I go away from the computer for 20 minutes, then I come back, but it asks for my password. How to turn it off?
View 2 Replies View RelatedThe other day I wanted to make a small change to my (user account) password, but I kept getting errors about the new password merely being the old with changed case, or just a cyclic shift etc.Security issues aside, is there any way I can override these checks so that I can make whatever minor changes I like to my password?
View 1 Replies View RelatedI am running Ubuntu 9.10 on a PC. When the computer is on standby and I want to fire it up again, Ubuntu demands a password. Since the computer is inside a private house, and I never put it on standby unless I am at home, entering a password is an unnecessary nuisance. Is there some way to turn this feature off?
View 3 Replies View RelatedCould someone please tell me how to turn my password settings back on for mintupdate? Somehow it got turned off. I don't like how software can be updated without my password now.
View 9 Replies View RelatedI do not need this facility, frequently need to leave the computer, and can find no place to control this having to re-submit password when I return.
View 3 Replies View RelatedI remember my password very well and have no need of password recovery. Everywhere I look it's how to recover and I don't want that. The kind where you boot into root recovery console to change the password.
View 4 Replies View RelatedI'm having some ldap & sso issues and need to turn of failed attempts=3 in /etc/pam.d/system-auth file. I don't want to just delete that line. what would be the best method?
View 2 Replies View RelatedMy daughter from New Zealand gave me her Acer Aspire 4315 Laptop/Notebook Linux System in December 2009 so that I could use it in bed on days that I was unable to get out to use my main computer as I am a very ill man. I was able to log into the unit as she just said to me to use her name and password to. I have been able to use the unit on the internet at home and my other daughters home through a home wireless system. I clicked on the Upgrade Icon which it did, I think it went from a 7. something to 8.something All the way through the set up it asked me questions and I just clicked yes thinking that was what I had to do. My problem now is, that when I turn the unit on it asks me for a username and password. I put the details my daughter gave me but it tells me invalid user and password. All I do know is that a friend of my daughter installed the Ubuntu Program onto the Laptop/Notebook. Can anyone tell me how or what I have to do now to be able to use the unit again as I am getting very frustrated with the whole thing. I am not used to using Ubuntu and am totally lost with it as I have always been a Microsoft user.
View 9 Replies View RelatedI have Ubuntu 9.04, and a HP laserjet 1018 printer.
I install the printer using:
And when it ask me about plugin I give the path to it. (the 3.9.2 version of the plugin, because Ubuntu 9.04 has the 3.9.2 version of hplip)
well I install the printer, everything works perfectly.....but, when I turn off the PC, and turn it on again, the printer does NOT work!, I send work for being printed but mothing happens , Ubuntu tells me that the job was printed but ... no case, my printer does not print it.
I have to install it again since cero. what can I don to stop install it every time I turn off the computer ?
I was recently upgrading from Ubuntu 10.4 to 10.10 when with 14 minutes remaining on my install it froze and quit upon a restart it wouldn't boot correctly.
I decided to put 10.10 on a cd and it boots to a black screen asking for a login then password, login enters alright but the password won't show any characters being entered. Hitting enter results in "pc-login incorrect".
I have installed Ubuntu Server 10.10 in Virtual Box in order to evaluate it for a project.I have installed Gnome and can log in fine using my password. However, whenever I am prompted for my password when doing anything SUDO I am told my password is incorrect, starting Synaptic, for example
View 9 Replies View RelatedI have an acer aspire one running linpus
Generally I'm very happy with it apart from not being able to run some of the software I use but I do like the linux system.
Now, though, I find that it is progressively holding me back as more and more things I want to do require a change that involves the password protected access and I don't know it.
I tried 000000 and 111111 I don't know if anybody knows another default password. It maybe I did change it but I have no idea what to.
I have fresh install of SuSe11.2 64x My software updater applet tells me there are about 50 or so updates required. I check all and then click install, get prompted for admin password but then nothing happens except the software updater window closes and if I hover my mouse over the applet it tells me it is updating.
however hours later and nothing appears to have happened. If I click the updater applet all the selected updates still appear in the update window. I have added all the standard repos and have network connectivity. I'm a bit baffled here - it worked perfectly fine on my last 11.2 on the same machine.
I'm using suse linux. Its new one to me. Without using any password I am using this linux. If I want to install a software it shows that the software is read only. I was used the guide to install the software but it ask me that to give password in terminal. If I enter in to account setting to create a new password. It asked the old password. Without the password the system was booting. How can I set the password?
View 2 Replies View RelatedTo install horde/ imp. I found this page : [url]
I get stuck at the part where it says Youll need to use the MySQL root password. Then, in your database administration screen for MySQL, set the password for the new MySQL user horde to something nicely random and hard to guess; keep a momentary record as youll need it below.
It is really frustraing to get stuck at something so simple as installing horde imp on centos. how to get it installed on a CENTOS 5.x system ?
It seems xdg-su is unable to accept my admin/root password whenever I try to install a new AIR application or make an upgrade.Upon every attempt to add my admin/root password I get an error: "su: Authentication failure". In the end: "Error# 5100"!I have recently upgraded to Lucid, but the problem has arisen back in Karmic.
View 1 Replies View Relatedhello i am trying to change my password, but when i type in the new password i get this:"The password is longer than 8 characters. On some systems, this can cause problems. You can truncate the password to 8 characters, or leave it as it is."my question is what kind of problem could i get and how can i change so i have to log in every time i start the computer?
View 9 Replies View RelatedI m Trying to get vsftpd usergroups to work i accidentally moved a file called passwd from /etc/vsftpd/ to /etc/, resulting in my root access is destroyed! how to restore the passwd file so i can keep working, or do i have to re-install the entire box?
View 4 Replies View RelatedI'm really new to Linux so this will probably sound like a pretty naive question to most users, but how do you change the root password?To install Java, I have to type # su into Terminal,which then asks for the password.What's weird is that when I start typing a password, no characters show up. I don't know if this is supposed to happen or not.I've found a bunch of different sites on the Internet that explain how to change the root password, but none of them seem to work for my specific work station.
I've got Ubuntu 9.10 64 bit. In the GRUB boot menu, I can choose to boot normal or in recovery mode (I'm led to believe older versions don't have this option).I've tried typing # sudo passwrd into Terminal, but I already have a root password set up apparently, so I can't change it there.
I thought these were the same password?In-fact, they WERE the same password on the set-up I currently have.But now, weirdly, I can log in fine but I the exact same password is not using in order to perform admin tasks.I've tried a recovery mode, console, and then "password (username)" in order to reset the password.This does reset the password I need to use to log in, but the password still does not work for performing admin tasks
View 4 Replies View Relatedi changed my password and whenever i log in i get a message that ur login keyring password and user password do not match, so how do i change my login keyring password!!
View 1 Replies View Relatedeverytime i try to vnc to my box, it pops up the keyring authentication, which is obviously a huge problem when logging in remotely.how do i change my keyring password to match my login password?
View 4 Replies View RelatedI have a rather difficult problem. Every time I need root privileges and I am asked to authenticate (i.e. Update Manager, mounting a partition, etc), the password window comes up, shakes and immediately closes, leaving me with no chance to enter a password. What to do?edit: this is NOT the login window, just the little dialog that pops up when you need elevated privileges.
View 5 Replies View RelatedI know this has probably been asked too many times here but I need to secure my emails. Personal matters of course. But yeah. I use the program "Password and Encryption Keys" to generate a key to sign my emails with but I do not know what to do. To be blunt, I'm stupid when it comes to this. IF not, steps in creating a key? and giving it (my public key) to the significant other? Finding where both keys are? Implementing it into Thunderbird? If it helps any here's some extra information: Ubuntu distro: Ubuntu 10.04 Email client: Thunderbird
View 7 Replies View Relatedi changed my account password but now when i log in a keychain manager pops up and asks for the old password to join wifi.
how can i update the keychain password to match the account password?
I am new to using Ubuntu 10.10 that was installed by a friend of mine, but he didn't give me a password for administrator and now when I try to install VLC I am blocked by a password prompt. To make things worse I can't use F1 key, esc key, tab key, 1key (I copy and paste 1 from other pages when I need it). I am at a loss here and all I want is to change the administrator password without validating the current password first.
View 2 Replies View RelatedI have a brand new install.I was doing some housekeeping and made a more sure password.Something went wonky and I got locked out.So I booted to root and changed the password.I'm back in the box now.But, my keyring password no longer matches my user password.So every time I want to do something I am asked for my old password.How do I change my keyring password to match my login password?
View 3 Replies View Related