Ubuntu :: Run From CD Doesn't "see" External Hard Drive?
Jun 22, 2011
Hoping to retrieve data from my normal hard drive, which has spontaneously decided to make the root directory unreadable start from a bootable CD (9.10), and I can at least see the (remains of?) the 247 Gb file system.But I can't see my USB external hard drive, though judging by the power indicator the USB port itself is OK.
Is there some special trick I need to carry out to make the external drive visible as a storage device so I can start rescuing files? and (apart from take a backup the day before) any tips on persuading data out of "unreadable" folders?
In Ubuntu 10.04 all I had to do was turn on my external hard drive and it would automatically be detected and mounted. I just switched over to Ultimate Edition, which I think is Ubuntu 10.04 with a lot of stuff added on to it. The funny thing is when I turn on the external hard drive it doesn't get mounted, and I don't think it's even being detected. I looked in gparted and it doesn't show up there. If I boot into Ubuntu 10.04 and turn on the hard drive it still gets detected and mounted, so there's nothing wrong with it. Ultimate Edition can detect other things connected to USB, like my iPod, so I'm wondering why it can't detect my hard drive.
Edit: When I do tail -f /var/log/messages and if the drive gets detected, this is what it says:
[ 230.520892] usb 1-2.4: new high speed USB device using ehci_hcd and address 6 [ 230.639400] usb 1-2.4: configuration #1 chosen from 1 choice [ 230.639717] scsi9 : SCSI emulation for USB Mass Storage devices [ 235.631550] scsi 9:0:0:0: Direct-Access Maxtor OneTouch 0122 PQ: 0 ANSI: 4
I have a 1TB usb External Hard drive (Segate), I would like to install linx on that drive. I tried red Hat it does not find hard drive. I run open suse, I partition the hard drive. After installation of disk 1 it reboots, at that point it does not go to usb external drive.
a friend of mine just given me an old 2004 IBM NetVista 8305 desktop and suggested to use Linux Ubuntu which is something new to me. So i installed it via USB memory stick & it works. After installation of the OS I am impressed with functionality & speed. when i conect the external hard drive via usb it doesn't show & i tried my usb flash disc it showed the same problem. I tried both disk in my laptop (Windows XP) & it works.
I had this corrupted external hdd and so I formatted the main partition on it on windows but messed up in the formatting and ended up having to format the entire thing. I got some weird message about it not being initialized (no not mounted) so I was in compmgmt.msc in windows and right clicked it in device manager and it asked for master boot or GUID I selected the latter and formatted. Worked fine and all for a bit but now it doesn't show up as a drive. I noticed when using compmgmt.msc it showed up that it had installed driver software and was being recognized but in the partition editing area there was nothing on this drive, reinstalling driver software doesn't seem to help. Also GParted wont load up when I have it plugged in and Disk Utility doesn't show it. I am requesting help to fix this problem within Ubuntu 10.10 somehow so I can use it properly.
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
I have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
I recently bought 320 GB Trancend external hard disk and working fine days back.Earlier i could copy from and to the hard disk with out any issue. I dont know what happened after that now i am not able to write any files in to the external hard disk. This is not NTFS formatted device. here is some of the out put from terminal.
Code: sundar@sundar-sundar:~$ fdisk -l Disk /dev/sda: 120.0 GB, 120034123776 bytes
I would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation
Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.
I have 350GB external Western Digital USB hard Drive.When I try to remove it from the system by executing Safely Remove Drive menu the fedora 15 system gets stuck.The processor starts giving a hum sound and it goes on even if it is left for half an hour in the stuck state.The Mouse is not working and everything is halted.
i have installed fedora 14 with so many libraries ,development tools installed on my pc but i usually have to present some projects which can run on my system .........and can't be executed or compiled due to absence of libraries and tools there so, i there some way to so that i can use this current installation on my hard drive of my pc to some external media like external hard disk and plug and use that installation anywhere on any system..
I have been trying to install centos on my hp servers and when i get to partitions my hard drives the OS does not detect any harddrives. I have 4 scsi drives and i believe a intergrated smart array controller.
So I recently got a WD MyPassport external hdd with 500gb capacity. I formatted it to NTFS so that it would be more efficient transferring data between my Ubuntu and Win7 dual boot. But now I want know if it is possible for me to create a 100gb FAT32 partition on the external without destroying the data on it.
My Toshiba 500Gb USB hard drive is not being detected anymore when i insert it in 9.10. It only started doing this from last week, it was fine before (and it works fine in Windows XP). The connections are fine and all, because when i type "lsusb", i see it as follows:
Bus 001 Device 003: ID 19d2:0063 ONDA Communication S.p.A. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 004: ID 0930:0b09 Toshiba Corp.
Is it possible to use Ubuntu for a malfunctioned external hard drive?A year ago my external hard drive malfunctioned and I cant get into it, though it plugs in alright and the computer recognizes it, I'm hoping that maybe precious files havent been wiped and are just stuck in there.Is there anyway that Ubuntu can help?Also, if there is, what exactly is the first thing I do or type into the terminal?
I'm trying to get ubuntu 9.04 to recognize a Maxtor One Touch III USB external hard drive. This drive has been formatted and used on a Windows XP. I cleared everything off but am trying to see if I can arrange it so that I can back up from linux and access (if need be) from a Windows machine.
Here is what I get with fdisk -l:
/dev/sda1 * 1 14219 114214086 83 Linux /dev/sda2 14220 14593 3004155 5 Extended /dev/sda5 14220 14593 3004123+ 82 Linux swap / Solaris
I am having problems mounting an iso on my external hard drive. I do not want to move it onto my linux partition because it is 3.6 GB. I have a directory made (/media/iso) that I would like to mount it in, but if that doesn't work then I don't care where it goes. After I mount it I want to be able to run it using Wine, but that will come later. For now I just need to get it mounted. And, of course, I am fairly new to linux/ubuntu.
I have a 250GB external hard drive that I want to format to ext4. It will be used to store back ups of my documents, music and pictures. I tried booting the Ubuntu 9.10 Live CD (amd64) and using gparted to delete the partitions that where on the hard drive leaving only unallocated space, then creating one new partition that was ext4. I clicked apply and after a short time it said all operations completed successfully.
Now the problem is it won't let me transfer any documents onto the hard drive, or even create a folder or file. If I go into the properties of the hard drive, under the permissions tab it says I am not the owner...?
I just bought WD External Hard drive for my laptop and found out that there is no support for Linux. I am running Ubuntu 9.10 and need advice on installation.
I've been checking the Forums and I can't find anything similar to my problem yet. I have 2 external drives that my UBUNTU 9.10 doesn't recognize, although I can see them perfectly in Win XP.I was using them in Ubuntu until 2 weeks ago, when this problem started and I can't find a way to see/mount them again. GPARTED doesn't find any of them; and when aply fdisk -l, can't see them either (only my internal HD).
I have another question. When again restart the computer, I lost everything I had installed before. I am sure there is option somewhere to be turned on. I do not know where it is? Is there anybody can tell me where it is? I have installed UBUNTU on the external hard drive.
I run 10.04 lucid in a laptop with EXT4 as filesystem, and I tried to mount an external hard drive from a Windows that, obviously, uses FAT32. Its the first time I try to mount a hard drive (external) since the upgrade to 10.04. Do I have to download some packages via synaptic? If not, what do I have to do?
Plus, I have run Code: sudo fdisk -l and this is what I get
I have an external hard drive which connects to a usb port. until recently i could unmount it by right clicking on the desktop icon and selecting unmount. now when i try that it tells me that i can't because the device is not in fstab and i am not the root. i checked mtab and it had this line '/dev/sdb1 /media/usb0 msdos rw,noexec,nodev,nosuid 0 0' i changed that to '/dev/sdb1 /media/usb0 msdos user,rw,noexec,nodev,nosuid 0 0' thinking that would fix it, but it didn't. i unmounted using 'sudo umount /media/usb0' and restarted my computer and now the line in mtab reads '/dev/sdb1 /media/usb0 vfat rw,noexec,nodev,sync,noatime,nodiratime 0 0' and i still can't unmount without using the sudo umount command. i also tried adding '/dev/sdb1 /media/usb0 msdos user,rw,noexec,nodev,nosuid 0 0' to fstab and that didn't help
I want to backup my documents, using Fwbackups, on an external hard drive (a LaCie Ethernet Disk mini). But I can't seem to access that drive from FWbackups. As a first test, I tried a One-time backup (to backup some of my personal folders).Using Nautilus file manager, I access the external hard drive simply by going to Network, then to "Edmini FTP" or to "EDmini SMB". But when I need to pick a destination folder in Fwbackups, I can't seem to find the external hard drive. I tried "local folder", then Browse, but Network doesn't appear.
(Can I find it somewhere else?)I tried "local folder", then copy pasted the location from Nautilus [URL] but that didn't work - I get the red button, and when I do try the backup, I get "ERROR : The destination folder [URL] could not be created: [Errno 2] No such file or directory: [URL] So how do I choose my external hard drive as destination ?
I am setting up a Linux laptop for my parents, and want to also create some backup scripts to allow them to easily back up to an external hard drive. [And for them to be able to use it, it has to be super simple.]
For security purposes (should the external drive ever get lost or stolen), I want to encrypt the entire device using TrueCrypt. That means my scripts will have to use TrueCrypt to mount the backup volume using the device name. [Right?]
Now to the actual question(s): 1) Is there a way to ensure that an external hard drive will ALWAYS be assigned the same device name when plugged in? [That would be the simplest solution for me.]
2) Alternatively, is there a way (using bash scripting) to "find" the device name of a particular external hard drive, even if it might not be known in advance.
Just got a WD Elements 2TB External Hard Drive for my home computer (Ubuntu Lucid)in which I will load all the media files (pics, music, video), it mounted automatically to my user, no problem, but I have two questions:1.) I can see that it has some stuff on root level, an autorun folder, a System Volume Information folder, and an autorun.inf file. Do I leave them there? Or do I delete them?2.) The marriage saver question. My wife cannot access the drive, even though it does appear as a folder with an "x mark" inside her media folder of the filesystem, but she gets something like she does not have sufficient user privileges or something like that.So how do I make it so that she can also access the drive, or certain folders of the drive, which would be an even better option as the backup stuff would be inaccessible to her
Any opinions on this? I think it would be very convenient for me, but I don't want to cripple the speed of my computer if it is going to slow it down substantially.
