I'm trying to download Star Wars the Clone Wars torrents from two different feeds. The scantime below is temporary while I'm trying to get it to work. Will change it to 15 min later on.Below is the verbose output.
Quote:
INFO --- RSSDler 0.4.2
DEBUG writing daemonInfo
INFO [Waking up] Wed Oct 27 18:12:11 2010
DEBUG checking working dir, maybe changing dir
[code]....
I'm trying to download the .iso image through Vuze and it is not connecting and downloading.
View 9 Replies View RelatedEverytime I download a torrent and ktorrent opens and starts downloading it it always sits at a stalled. What is wrong?
View 9 Replies View RelatedWhen I start downloading torrent via transmission, utorrent, deluge every time I get disconnected network which can be fixed with restarting DSL modem, I've never had the problem in Win7 an WinXP.
View 8 Replies View RelatedI am trying to install ubuntu on my windows 7 OS using the wubi installer. The installer is trying to download amd.iso.torrent, but I guess it should be downloading i386.iso.torrent. At, the same time I am getting permission denied even though I allowed access from my firewall.
View 2 Replies View RelatedEvery time I download torrents in Ubuntu 11.04 on my desktop, using Transmission or Deluge clients, the wireless transfer speed abruptly drops off, becomes very choppy, and in general doesn't remain stable. It's not only the torrent download that slows down, but it's everything including web surfing, even though I'm not maxing out my connection speed. It's not that I'm getting disconnected from my router, it's just that the wireless transfer speed drops off, becomes intermittent, and never gets back up to full speed.
At first I thought that my ISP was throttling my connection, but this issue doesn't happen with a direct cable connection to my router, nor did it happen when I was running Ubuntu 10.04 before. It also doesn't happen when I'm downloading the exact same torrents over wireless using my netbook running Ubuntu Netbook Remix. This issue ONLY seems to happen when using a bittorrent client while on wireless on Ubuntu 11.04 on my desktop. I can max out my internet connection speed by streaming videos, downloading from FTP, etc. using wireless just fine, and the transfer speed remains stable. This also seems to happen with a couple of different wireless USB adapters (rt73usb or rtl8187 drivers).
I tried every torrent client I could find for linux, and it's getting on my nerves, neither of them want to start downloading anything, what can I do?
View 11 Replies View RelatedI couldn't find an answer myself. So, the problem is that every single bittorrent program I tried downloads files I checked to ignore so I know this is not a program related issue. For example, there are 2 pictures in a torrent, I select only one but in the end I have both downloaded.
View 9 Replies View RelatedI use deluge and it worked for a while then randomly I got this error message when trying to download a .torrent file:"/tmp/Manchester_Orchestra___I_m_Like_A_Virgin_Losing_A_ ___-1.torrent could not be opened, because an unknown error occurred.Try saving to disk first and then opening the file."
View 2 Replies View RelatedI'm trying to create a torrent file via the command line. I used "transmisson-create", but since the .torrent file is binary I can't read it using "less" or "nano". Is there a way of verifying that the torrent I created was correctly done? I know I could probably upload the .torrent file to my public server and then use another torrent client to test, but I simply want to see what's inside the .torrent file to verify that it got all the files I wanted. I cd'd into the directory with the files that I want to torrent and ran the following command.
Code:
$ transmission-create -p -t http://tracker.openbittorrent.com/announce *
I have utorrent running on wine without issue. I click on the utorrent.exe and it opens and runs great. My problem is that even after setting .torrent files to open with utorrent (instead of transmission which is the defualt) and then try to open them NOTHING happens. I have to go into utorrent and open the torrent files. This is kind of a pain in the butt cause I want to be able to download and run them from my browser so after the download is finished it gets loaded into utorrent.
View 7 Replies View RelatedI'm thinking on trying Debian, I searched through their website and I went to the download site and I see there are 5 dvds torrent files? Which one should I download? I mean is debian that heavy that i need 5 dvds to get everything installed? By the way is there a kde version? I want kde.
View 6 Replies View RelatedI need to know file names in torrent without opening torrent client. Know and extract for further actions.
View 2 Replies View RelatedI've been using PAN for quite some time - recently installed 0.133 from the Ubuntu software centre. Worked fine for a while, no issue. Then, a week or so, it started downloading .msg files in company with the binary files I was getting. Sometimes one .msg file for one binary, sometimes quite a few. It seems to have some correlation to the size of the binary, that is the larger the binary, the greater the number of .msg files were downloaded.This morning, it would ONLY download .msg files. I could see the decoded binary in the PAN viewer pane, but it isn't present on my system. I have made NO changes to any configuration files, other than installing the recommended updates.
How do I correct this?Can anyone tell me what these .msg files are, and how to stop them from downloading?Are there as-good or better newsreaders out there that I can/should try?
How to set up a script to log on to a server through SSH, copy file from the server to the local machine, and then run a script on the downloaded file. More specifically, I've got a minecraft sever that is run on ubuntu.
I know that I can do
# ssh username@ipaddress
to log on to the server through the terminal.
After this it asks me for a password. Once I type in the password I have access to the directories on the server. How can I set up a script to log on to the server and enter password? Once I do this, how do I automate it to copy a file from that server to ~/Desktop? If I can do this, I have a script that will run from there.
I've learned that I can do
scp -r remoteuser@remotebox:/remote/directory /local/directory to copy files from a server to my local machine, but it still asks me for the server password. how do I make it so that the password is automatically entered?
When I try to load a php file my browser downloads the file instead of displaying the page. Here is my apache conf file.
#
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the configuration directives that give the server its instructions.
# See [URL] for detailed information about the directives.
# Do NOT simply read the instructions in here without understanding what they do. They're here only as hints or reminders. If you are unsure consult the online docs. You have been warned.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server, which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to different IP addresses or hostnames and have them handled by the same Apache server process.
# Configuration and logfile names: If the filenames you specify for many of the server's control files begin with "/" (or "drive:/" for Win32), the server will use that explicit path. If the filenames do *not* begin with "/", the value of ServerRoot is prepended -- so "/var/log/apache2/foo.log" with ServerRoot set to "" will be interpreted by the
# server as "//var/log/apache2/foo.log".
#
I have an Ubuntu 9.10 server set up at my house. I have Apache2 and PHP5 installed on it. Every time I go to the server on a web page and try to load the PHP index page it downloads instead of displaying.
I have virtual servers set up and have the files stored at /home/cusinndzl. If anyone needs to take a look I can let them into the webmin panel.
Ubuntu Lucid 32-bit desktop machine. I run "aptitude update" and "aptitude safe-upgrade" manually from the command-line regularly to upgrade my machine. I usually don't pay that much attention to the downloading, but I noticed yesterday that aptitude appeared to be downloading four files simultaneously, rather than the one at a time that I've always seen. Would this be correct? How can I change that? I can't say I've ever noticed it before.
View 3 Replies View RelatedI understand wget is used to download files. Is there a way I can search a url for what files are available for me to download. I need to install a plug-in from an adobe website.
View 2 Replies View RelatedI want users of my website to be able to download files from it.
When they request a download, I would like them to see a window with the following attributes: ability to choose where downloaded file goes; progress of the download, and estimate of remaining time; a button to cancel the download.
There are hundreds of sites out there that do this, so obviously it's possible, but can it be done from a php script on the server? If not, does anyone know of a script in java(/script)?
I would also like to monitor when a download failed and succeeded, and if the failure was not because the cancel button was pressed, pickup whatever system information is available about the failure cause.
I have some scripts that need to use a newer version of PHP, Im running Debian 6 which has PHP 5.3.3 support, I found I could install php 5.4 using [URL]. This worked, it updated my PHP to a newer version, the only issue is that when the install completed apache now downloads the PHP file instead of rendering it.
Im guessing this has something to do with the Apache configs, but I don't know what to do.
Code:
Select alltom@vps:~$ dpkg --list |grep -E '(apache)|(php5-)'
ii apache2 2.2.16-6+squeeze12 Apache
HTTP Server metapackage
ii apache2-doc 2.2.16-6+squeeze12 Apache
[Code] ...
I was thinking of migrating my apt-mirror repository to the recommended ftp scrips: [URL] .....
I pre populated my pool with already downloaded files, and setup the scripts.
However, if I run the bin/ftpsync, and monitor rsync with lsof -p, I can see that it is still downloading files from oldstable (wheezy) despite exclude options.
I'm guessing it's a configuration error, but I can't seem to figure it out. Any thoughts? My etc/ftpsync.conf is as follows:
Code: Select allMIRRORNAME=`hostname -f`
TO="/server_storage/srv/mirrors/debian"
RSYNC_PATH="debian"
RSYNC_HOST=ftp.us.debian.org
LOGDIR="${BASEDIR}/log"
[Code] ....
Actually, I don't think it works like I thought it did. A few guides I found listed the exclude options, but the sample config file has this:
Code: Select all## If you do want to exclude files from the mirror run, put --exclude statements here.
## See rsync(1) for the exact syntax, these are passed to rsync as written here.
## DO NOT TRY TO EXCLUDE ARCHITECTURES OR SUITES WITH THIS, IT WILL NOT WORK!
#EXCLUDE=""
So it looks like it doesn't exclude the suites at all.
I keep on downloading tar.gz files into my downloads folder and i cant do anything with them. what i need to do to install the file so i can use it? An example, i am trying to install Frets on Fire, and am failing bad.
View 9 Replies View RelatedI need to download some very large files (circa 75 GB) from a remote server via SFTP. I've been using SFTP via the command line on my Linux netbook. Around halfway through, the transfer stops and says "stalled." Can anybody recommend a reliable way to download these files?
View 1 Replies View RelatedHow do I download all the files form here: [URL]. I am on freeBSD 7.0 and I tried wget with the -r switch and it gives me URL's only. Maybe this is simply not an ftp site I don't know. How I can download all those files with the same directory structure.
View 5 Replies View RelatedIs there an easy way to get all of the multilib files from [URL]? I've tried:
1.) wget - won't use wildcards on an http server, and trying to get the whole folder just gets me index.html
2.) ftp - it's not an ftp server and I can't login anonymously via gftp. I wasn't expecting this to work, it was just something else to try.
3.) rsync - If this could work, I may not be using the right syntax. I tried (-n for a dry run first):
Code:
rsync -avn [URL]
And it just sat there doing nothing until I hit ctl-c.
Obviously I could download each file from my web browser but I figured there had to be a more elegant Unix-y way without all the clicky-clicky. Are the files hosted on an ftp server anywhere?
I currently mirror the updates repository to my computer using rsync. I was wondering if I could save space and bandwidth by only rsyncing the .delta.rpm files? Are there any disadvantages to this or does zypper/YAST handle updates just fine with it?
View 3 Replies View RelatedI want to limit bandwidth for downloading files with squid. I want to reserve bandwidth for other traffic (esp. web browsing). I know about delay pools but I don't understand well. Some users use download managers to download large movie files. I don't want to block downloading but I want to give them limited bandwidth. May be 5KBps or 6KBps because I have only 512Kbps (64KBps) connection.
View 1 Replies View RelatedI am looking for a file sharing program to install on my dedicated server that will allow me to upload large MP3 files and allow my clients to download them. these files are recordings of counseling sessions for families who are seeking help for their children.
What I am looking for is similar to the system this company uses [URL].
New apache install, php files are downloading rather than displaying, does anyone know whats causing this. When I compiled php with apxs it automatically added this line:
Code:
LoadModule php5_module modules/libphp5.so
I restarted apache, and also try adding this line:
Code:
AddType application/x-httpd-php5 .php5 .php4 .php
and then restarting.