I am trying to install ubuntu on my windows 7 OS using the wubi installer. The installer is trying to download amd.iso.torrent, but I guess it should be downloading i386.iso.torrent. At, the same time I am getting permission denied even though I allowed access from my firewall.
View 2 RepliesI have Redhat enterprise linux 4 and it is used for squid. This machine is behind the Cisco PIX Firewall and it is handled by our network administrator. few days ago, my boss ordered me to allow Mail (Yahoo, Hotmail, G-Mail) only to some users and block every things for them. Here also, some other users (not above) have allowed downloading, movies etc and some users have not. I did it in squid as follow for users who required mail access only:-
[Code]....
I'm trying to download Star Wars the Clone Wars torrents from two different feeds. The scantime below is temporary while I'm trying to get it to work. Will change it to 15 min later on.Below is the verbose output.
Quote:
INFO --- RSSDler 0.4.2
DEBUG writing daemonInfo
INFO [Waking up] Wed Oct 27 18:12:11 2010
DEBUG checking working dir, maybe changing dir
[code]....
I'm trying to download the .iso image through Vuze and it is not connecting and downloading.
View 9 Replies View RelatedEverytime I download a torrent and ktorrent opens and starts downloading it it always sits at a stalled. What is wrong?
View 9 Replies View RelatedWhen I start downloading torrent via transmission, utorrent, deluge every time I get disconnected network which can be fixed with restarting DSL modem, I've never had the problem in Win7 an WinXP.
View 8 Replies View RelatedEvery time I download torrents in Ubuntu 11.04 on my desktop, using Transmission or Deluge clients, the wireless transfer speed abruptly drops off, becomes very choppy, and in general doesn't remain stable. It's not only the torrent download that slows down, but it's everything including web surfing, even though I'm not maxing out my connection speed. It's not that I'm getting disconnected from my router, it's just that the wireless transfer speed drops off, becomes intermittent, and never gets back up to full speed.
At first I thought that my ISP was throttling my connection, but this issue doesn't happen with a direct cable connection to my router, nor did it happen when I was running Ubuntu 10.04 before. It also doesn't happen when I'm downloading the exact same torrents over wireless using my netbook running Ubuntu Netbook Remix. This issue ONLY seems to happen when using a bittorrent client while on wireless on Ubuntu 11.04 on my desktop. I can max out my internet connection speed by streaming videos, downloading from FTP, etc. using wireless just fine, and the transfer speed remains stable. This also seems to happen with a couple of different wireless USB adapters (rt73usb or rtl8187 drivers).
I tried every torrent client I could find for linux, and it's getting on my nerves, neither of them want to start downloading anything, what can I do?
View 11 Replies View RelatedIn the firewall, I opened port 5900 for TCP traffic. Now the console is displaying packet information whenever a connection is made. Why does it send a message to stdout/stderr for an allowed connection? How can I stop it? Logging level is set to critical only, and not-accepted packets should only be logged for the internal and DMZ zones.
View 1 Replies View RelatedI have recently installed Debian 504 AMD64, when I try to access "System" --> "Administration" --> "Users and groups" logged in as root, I get the following message:
"The configuration could not be loaded. You are not allowed to access the system configuration."
The system does not even ask for a password and the result is the same if I log in as a normal user.
I have installed from a single ISO DVD downloaded from the internet and read the DVDs of my previous Debian distro to install packages not included on DVD 1 of Debian 504 although I do not think this unusual approach can have any effect on the installation. I suspect I'll have to boot in single user mode but I have never done any troubleshooting at the command line.
(/etc/passwd and /etc shadow look OK).
As I view it, Ubuntu has a great security risk in that it still allows internet access when the VPN connection has been lost, for whatever reason. As it is now, when the VPN connection fails you get bumped back to using your regular IP, and whatever you are doing becomes transparent to anyone watching. This is simply unacceptable for an allegedly secure platform. Does anyone know of a way to fix this with a script/program, or is there a distribution/OS that allows this? Windows re-dials the vpn automatically, but still allows internet access in the mean time.
View 1 Replies View RelatedWhile reading some papers on securing apache with selinux, I have tried to bind httpd to port 3000 expecting to be blocked by the selinux, since port tcp 3000 isn't on the http_port_t list. However I was able to start the service...
I'm preety sure selinux is enforcing. Also, if I bind httpd to tcp 81 selinux denies the start of the service, as expected!Did I miss something? Why is httpd allowed to start binded to a port that's not explicitly allowed?
I am fairly new to Fedora or rather use it only for some school exercises I get. I have to setup a Samba server with some basic settings and it doesn't want to work. I first tried it on the Fedora VM I got from school (version 11). It somehow worked, but extremely bad ... the Windows client had to wait for over a minute to get either access or an errormessage, that the server was not found (but when entered the ip in the adressfield on top it worked (with a minute or more to wait)). I tried updating the VM - no improvement. So I decided to download Fedora 12, installed it and the Windows client gains instant access on first glance. But when I try to get access to a specific share, it only tells me, that I am not allowed to access it Oo.
Here is my config:
Code:
I even turned off iptables and Windows firewall.
The funny thing is: I tried exactly the same config on my homeserver (copy and paste), which runs Arch, and it works with no problem. But on Fedora I cant access it from nowhere. Not from WinXP, Win7 or any Linux. Simply won't work.
I dont have any gui on Fedora
I use Transmission to download torrents off the internet. The problem is whenever I start the download, I cannot access the internet via my web browsers, Chrome AND Firefox. Altho, I can use Pidgin or Empathy to communicate. Why should I do ? I am assuming it is causing some sorta congestion .. I tried giving the downloads "low" priority, applying temporary speed limits but it doesn't help.
View 5 Replies View RelatedI would like to be able to monitor which programs are allowed to access the internet, but a search for programs to do this has turned up nothing. Preferably, I would like a notification to come up every time an application uses the internet. Is there any (n00b friendly) software available to do that?
View 2 Replies View RelatedI keep receiving the error message in the title above whenry to enterebmin.abc.com/webmin. I'm on Ubuntu 9.10. Other errors I'll receive are "You do not have access to any Webmin modules". Wondering if anyone knew what settings our permissions on files I could change to avoid these error
View 1 Replies View RelatedI use deluge and it worked for a while then randomly I got this error message when trying to download a .torrent file:"/tmp/Manchester_Orchestra___I_m_Like_A_Virgin_Losing_A_ ___-1.torrent could not be opened, because an unknown error occurred.Try saving to disk first and then opening the file."
View 2 Replies View RelatedNote: Not upgraded yet, still using Ubuntu Lucid Lynx.Recently I've had a strange problem with my internet connection. When downloading something I am unable to use the internet with other net clients. An example, this morning I was downloading a very large set of backup files from an online server where I store backups. The files totalled 1.5 GB and I was downloading them using a SFTP client called FileZilla - during the download I was UNABLE to access the internet using Firefox, pages did not load at all - NOT slowly, but NOT at all, the "can't find the server" message was displayed by Firefox.LikewiseThunderbird was not able to check/download email. Confirmation that no internet access (other than FileZilla) was possible was shown by trying to 'ping google.com', the response "ping: unknown host google.com". During all this FileZilla was downloading very happily and quickly and as soon as the downloads finished everything worked as normal.
The problem is not limited to FileZilla, when downloading a file with Firefox the same problem occurred. It is as if when downloading something all other net connections are put on hold including DNS lookups. In the past my internet connection might slow down as a result of downloading but I'd still be able to access the web and email just slower as a result of the download. This problem has only started happening in the last week or thereabouts.
I am using Squessze and Gnome. When I try to use the gui System>Administration>Network or Users and Groups I get the error The configuration could not be loaded. You are not allowed to access the system configuration.Everything was working before. I read around a bit. In some cases,it was caused by mismatching group and password files after using the gui. I do not know how to check if they are matching. Of course I do not know for sure that is the problem in my case.
View 14 Replies View RelatedI'm getting my first web server configured, and as per a tutorial I found, I used shorewall. However, it blocks all internet access (even from apt) to my server! Does anyone know a decent firewall program or a good guide on configuring shorewall?
View 1 Replies View RelatedI wanted to know if there was a firewall program out there that can open specific ports when a program/process is run and disable the ports again when the program is closed.
View 2 Replies View RelatedI have my firewall setup so that only specific subnets/IP addresses can access the system. My issue is that I have remote user/laptop who needs to access the system, but is constantly on a different subnet/dhcp IP address. Is there configuration for iptables where I can enter the mac address of the laptop to allow access to the system and not specify a subnet or IP address?
View 3 Replies View RelatedI've got my server mostly configured with Samba file shares - I can access from Linux and OSX computers. I've enabled Samba Clietn and Sambar server in the openSUSE firewall settings (on the server), but Windows 7 can't seem to connect. I've been trying to tweak registry keys in Windows and such, but had no luck. However, when I turned off the firewall on the server, I was instantly able to connect. Is there some other service or port I need to open for Windows 7?
View 4 Replies View RelatedI am looking for a solution for our LAN traffic monitoring and would like to use some opensource linux application. I have a linux box with two NIC cards and what I thought is the following: Our setup is as follows. Internet comes in through the router and into the firewall. From the firewall it goes into our switch and distributed among the workstations.
I have no access to the router or the firewall as they are centrally configured. I would like to place a device into the loop through which I could monitor the LAN traffic.
Can I put a linux box between the firewall and the switch and have all packets going through registered and logged? I have a proxy server (non transparent) and that captures some but not all. I would like to get all packets registered without interfering with the LAN etc.
I have a Perl script behind a firewall. I want to access this script from Python on Google App Engine. I have access to the server running the Perl script via the following methods: SSH VPN What are the ways I can do this with Python on GAE? Can I use something like wget, login through ssh and run the script using perl interpreter?
Currently it is a CGI script that I can access through a web browser if I'm inside the firewall. My only other option is to turn the process around, i.e. have perl send data outside the firewall to google app engine. But I want to know if this is possible as it is now without changing the perl script.
Just went to download 8.04.4 and to use the torrent. Guess what, the links on the page point to 8.04.3 torrent download which gets you a 404 error. To get by this, go into the address window of your browser and change each 8.04.3 to 8.04.4 and you will get the torrent.
Just thought I would pass this on if anyone was trying to get it via the torrent. If anyone is watching, maybe the links should be updated on the download pages.
Does anyone have the torrent url for the final 10.04 LTS? I don't seem to be able to find it......
View 4 Replies View RelatedI am interested in downloading ubuntu 10.04 on a cd for a friend. I want to use a torrent to get the file so I can seed after the download. When I go to the alternate download page located here: http:[url]....It gives me multiple options on which torrent to download:
ubuntu-10.04-alternate-amd64.iso.torrent
ubuntu-10.04-alternate-i386.iso.torrent
ubuntu-10.04-desktop-amd64.iso.torrent
ubuntu-10.04-desktop-i386.iso.torrent
ubuntu-10.04-server-amd64.iso.torrent
ubuntu-10.04-server-i386.iso.torrent
I am confused as to which I should download.I know that amd64 is for the amd architecture and i386 is for intel, but what is the difference between alternate and desktop?
I have a fresh install of SuSE 11.2. I have installed Communigate Pro (Email server) and Webmin. From my workstation (on the same LAN), I can access the web interfaces for both CGP and Webmin right after the server boots up. But after about 10 minutes or so, I can no longer access either web interface. The server itself still functions normally. I can get on the internet with the server, and I can control Webmin via localhost:10000.
The only thing that allows me to connect to it from my workstation again is to either restart the server, or go into "Network > Linux Firewall" and click "Apply Configuration". What's going on that makes my remote access stop working?
I could no handle/circumvent on the past week, despite of the several "googling" and documents reading. I will try to mention all needed bits... I'm managing a network with the following structure:
eth0: internal net
eth1: DMZ
eth2: 10 mbit/sec sync line with eight public /29 IP's + a /30 interconnection network. All public IP's must use the interconnection's network gateway.
eth3: ADSL with ppoe with fixed IP (ppp0).
Now, a few extra info:
- All internal traffic is routed through ppp0 except when it's destined for DMZ and public IP's range.
- DMZ traffic is routed either through ppp0 or eth2. This is done by source IP.
- eth2 has on IP from the interconnection network, and six public IP's are also defined on eth2. Command: "ip addr add ...."
[code].....