Ubuntu Installation :: Aptitude Downloading Files Simultaneously?
Apr 24, 2011
Ubuntu Lucid 32-bit desktop machine. I run "aptitude update" and "aptitude safe-upgrade" manually from the command-line regularly to upgrade my machine. I usually don't pay that much attention to the downloading, but I noticed yesterday that aptitude appeared to be downloading four files simultaneously, rather than the one at a time that I've always seen. Would this be correct? How can I change that? I can't say I've ever noticed it before.
View 3 Replies
ADVERTISEMENT
Feb 12, 2011
I'm tring to download an iso image that's over 3GB. The file is hosted at several ftp mirrors. Is there a way to download the file from several of these mirrors simultaneously so that I can reduce the D/L time? Presently, it's will take close to 24hrs to D/L from just one mirror. I have a 25Mbps connection so my bandwidth is not an issue.
View 8 Replies
View Related
Jul 11, 2010
I am trying to upgrade an amd64 lenny system to squeeze.I've got a 2.6.32 kernel running, done aptitude update and aptitude install aptitude.When I try "aptitude safe-upgrade", it sits forever resolving dependencies.it seems to search with the resolver counting up more and more open/conflict/ whatever.I stopped it once it got over 100,000)Is it possible to get aptitude to do a safe-upgrade, perhaps using a command line option?
View 2 Replies
View Related
Nov 22, 2010
Just during the last three days, when running Update Manager, clicking Check, downloading all available updates, then Clicking Install Updates, the Downloading Files window pops up but it is blank. and it stays blank. The little rotating icon indicates something's going on but, NO. Nothing has happened, even after a couple of hours. Trying to close Downloading Files brings up a window to Force Quit. Then trying to close Update Manager has no effect. to shorten the story, finally a window pops up saying that the "AT SPI Registry" is not responding. I'm sure trying the same thing will not yield different results. I'm running 10.04.
View 9 Replies
View Related
May 18, 2011
When using the "Files & Folders" search from the Unity launcher I can set what to search for. There are several options like "All files", "Folders" etc. I would prefer to be able to search files /and/ folders at the same time (The unity label is after all "Files & Folders, not Files or Folders). Is there a way I can get it to work like that which to me would be much more efficient?
View 9 Replies
View Related
Oct 28, 2010
I'm looking for a way to use klogd and/or syslogd to log all the default message levels to the standard /var/log/messages. I also want all kernel (and possibly user) error messages to also be logged to a second file. Is this even possible?
View 3 Replies
View Related
Jun 27, 2011
I have just tried XFCE4. Everything is cool except that when i select, let's say, 5 files on Desktop i can't move them simultaneously. I can move just one file. Is this normal behavior of XFCE?
View 1 Replies
View Related
Aug 5, 2010
i want to copy one or more files or directory from one drive to multiple drive simultaneously. It like a cloning a disk. But i dont like clone entire disk. i want to copy/clone only certine files or folder. if any one can know how to copy one source to multiple destination simultaneously.
View 3 Replies
View Related
May 2, 2010
Did a fresh install of 10.04 Desktop 86_64 this weekend. One of the first issues I noticed right away was that apt was not function properly. Say for example you install the packages tor and vidalia (assume I'm running everything from root). #apt-get install tor vidalia This command will check and install necessary dependencies, for example 'privoxy'. Now if you decide that you don't want to use privoxy and instead use polipo, you would probably feel inclined to remove privoxy. Well I found that apt-get autoremove, apt-get remove, apt-get purge WILL NOT remove all the files/directories associated with the package. You'll find that after running each of these commands, there will still be directories, scripts, etc. in /etc/init, /etc, and /etc/rc*.d. The only solution I've found to completely removing a package is aptitude purge [package].
View 1 Replies
View Related
Sep 27, 2010
I have a machine with 8 cores. I have a directory of input files that I need to process using a non-parallelized program. I would like to write a script that works its way through a list of commands executing 8 commans (i.e., instances of this program; each with specific flags having to do with the current input file) until the list of commands has been exhausted. Is there an easy way to do this?
Code:
hamstrsearch_local-hmmer3.pl -protein -refspec=lotgi_2713 -hmmset=lophotrochozoa_hmmer3 -sequence_file=Aplysia_californica.fas -taxon=ACAL
View 3 Replies
View Related
Nov 14, 2010
I've been using PAN for quite some time - recently installed 0.133 from the Ubuntu software centre. Worked fine for a while, no issue. Then, a week or so, it started downloading .msg files in company with the binary files I was getting. Sometimes one .msg file for one binary, sometimes quite a few. It seems to have some correlation to the size of the binary, that is the larger the binary, the greater the number of .msg files were downloaded.This morning, it would ONLY download .msg files. I could see the decoded binary in the PAN viewer pane, but it isn't present on my system. I have made NO changes to any configuration files, other than installing the recommended updates.
How do I correct this?Can anyone tell me what these .msg files are, and how to stop them from downloading?Are there as-good or better newsreaders out there that I can/should try?
View 3 Replies
View Related
Mar 27, 2011
How to set up a script to log on to a server through SSH, copy file from the server to the local machine, and then run a script on the downloaded file. More specifically, I've got a minecraft sever that is run on ubuntu.
I know that I can do
# ssh username@ipaddress
to log on to the server through the terminal.
After this it asks me for a password. Once I type in the password I have access to the directories on the server. How can I set up a script to log on to the server and enter password? Once I do this, how do I automate it to copy a file from that server to ~/Desktop? If I can do this, I have a script that will run from there.
I've learned that I can do
scp -r remoteuser@remotebox:/remote/directory /local/directory to copy files from a server to my local machine, but it still asks me for the server password. how do I make it so that the password is automatically entered?
View 2 Replies
View Related
Nov 19, 2010
When I try to load a php file my browser downloads the file instead of displaying the page. Here is my apache conf file.
#
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the configuration directives that give the server its instructions.
# See [URL] for detailed information about the directives.
# Do NOT simply read the instructions in here without understanding what they do. They're here only as hints or reminders. If you are unsure consult the online docs. You have been warned.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server, which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to different IP addresses or hostnames and have them handled by the same Apache server process.
# Configuration and logfile names: If the filenames you specify for many of the server's control files begin with "/" (or "drive:/" for Win32), the server will use that explicit path. If the filenames do *not* begin with "/", the value of ServerRoot is prepended -- so "/var/log/apache2/foo.log" with ServerRoot set to "" will be interpreted by the
# server as "//var/log/apache2/foo.log".
#
View 7 Replies
View Related
Feb 26, 2010
I'm trying to download Star Wars the Clone Wars torrents from two different feeds. The scantime below is temporary while I'm trying to get it to work. Will change it to 15 min later on.Below is the verbose output.
Quote:
INFO --- RSSDler 0.4.2
DEBUG writing daemonInfo
INFO [Waking up] Wed Oct 27 18:12:11 2010
DEBUG checking working dir, maybe changing dir
[code]....
View 2 Replies
View Related
Mar 17, 2010
I have an Ubuntu 9.10 server set up at my house. I have Apache2 and PHP5 installed on it. Every time I go to the server on a web page and try to load the PHP index page it downloads instead of displaying.
I have virtual servers set up and have the files stored at /home/cusinndzl. If anyone needs to take a look I can let them into the webmin panel.
View 4 Replies
View Related
Feb 1, 2011
I understand wget is used to download files. Is there a way I can search a url for what files are available for me to download. I need to install a plug-in from an adobe website.
View 2 Replies
View Related
Mar 23, 2010
I want users of my website to be able to download files from it.
When they request a download, I would like them to see a window with the following attributes: ability to choose where downloaded file goes; progress of the download, and estimate of remaining time; a button to cancel the download.
There are hundreds of sites out there that do this, so obviously it's possible, but can it be done from a php script on the server? If not, does anyone know of a script in java(/script)?
I would also like to monitor when a download failed and succeeded, and if the failure was not because the cancel button was pressed, pickup whatever system information is available about the failure cause.
View 4 Replies
View Related
Aug 4, 2015
I have some scripts that need to use a newer version of PHP, Im running Debian 6 which has PHP 5.3.3 support, I found I could install php 5.4 using [URL]. This worked, it updated my PHP to a newer version, the only issue is that when the install completed apache now downloads the PHP file instead of rendering it.
Im guessing this has something to do with the Apache configs, but I don't know what to do.
Code:
Select alltom@vps:~$ dpkg --list |grep -E '(apache)|(php5-)'
ii apache2 2.2.16-6+squeeze12 Apache
HTTP Server metapackage
ii apache2-doc 2.2.16-6+squeeze12 Apache
[Code] ...
View 1 Replies
View Related
Sep 6, 2015
I was thinking of migrating my apt-mirror repository to the recommended ftp scrips: [URL] .....
I pre populated my pool with already downloaded files, and setup the scripts.
However, if I run the bin/ftpsync, and monitor rsync with lsof -p, I can see that it is still downloading files from oldstable (wheezy) despite exclude options.
I'm guessing it's a configuration error, but I can't seem to figure it out. Any thoughts? My etc/ftpsync.conf is as follows:
Code: Select allMIRRORNAME=`hostname -f`
TO="/server_storage/srv/mirrors/debian"
RSYNC_PATH="debian"
RSYNC_HOST=ftp.us.debian.org
LOGDIR="${BASEDIR}/log"
[Code] ....
Actually, I don't think it works like I thought it did. A few guides I found listed the exclude options, but the sample config file has this:
Code: Select all## If you do want to exclude files from the mirror run, put --exclude statements here.
## See rsync(1) for the exact syntax, these are passed to rsync as written here.
## DO NOT TRY TO EXCLUDE ARCHITECTURES OR SUITES WITH THIS, IT WILL NOT WORK!
#EXCLUDE=""
So it looks like it doesn't exclude the suites at all.
View 5 Replies
View Related
Sep 20, 2009
I keep on downloading tar.gz files into my downloads folder and i cant do anything with them. what i need to do to install the file so i can use it? An example, i am trying to install Frets on Fire, and am failing bad.
View 9 Replies
View Related
Apr 1, 2011
I need to download some very large files (circa 75 GB) from a remote server via SFTP. I've been using SFTP via the command line on my Linux netbook. Around halfway through, the transfer stops and says "stalled." Can anybody recommend a reliable way to download these files?
View 1 Replies
View Related
Apr 8, 2010
How do I download all the files form here: [URL]. I am on freeBSD 7.0 and I tried wget with the -r switch and it gives me URL's only. Maybe this is simply not an ftp site I don't know. How I can download all those files with the same directory structure.
View 5 Replies
View Related
Feb 17, 2010
Is there an easy way to get all of the multilib files from [URL]? I've tried:
1.) wget - won't use wildcards on an http server, and trying to get the whole folder just gets me index.html
2.) ftp - it's not an ftp server and I can't login anonymously via gftp. I wasn't expecting this to work, it was just something else to try.
3.) rsync - If this could work, I may not be using the right syntax. I tried (-n for a dry run first):
Code:
rsync -avn [URL]
And it just sat there doing nothing until I hit ctl-c.
Obviously I could download each file from my web browser but I figured there had to be a more elegant Unix-y way without all the clicky-clicky. Are the files hosted on an ftp server anywhere?
View 5 Replies
View Related
Mar 24, 2011
I currently mirror the updates repository to my computer using rsync. I was wondering if I could save space and bandwidth by only rsyncing the .delta.rpm files? Are there any disadvantages to this or does zypper/YAST handle updates just fine with it?
View 3 Replies
View Related
Jan 23, 2010
I want to limit bandwidth for downloading files with squid. I want to reserve bandwidth for other traffic (esp. web browsing). I know about delay pools but I don't understand well. Some users use download managers to download large movie files. I don't want to block downloading but I want to give them limited bandwidth. May be 5KBps or 6KBps because I have only 512Kbps (64KBps) connection.
View 1 Replies
View Related
Jun 5, 2011
I am looking for a file sharing program to install on my dedicated server that will allow me to upload large MP3 files and allow my clients to download them. these files are recordings of counseling sessions for families who are seeking help for their children.
What I am looking for is similar to the system this company uses [URL].
View 4 Replies
View Related
Oct 17, 2009
New apache install, php files are downloading rather than displaying, does anyone know whats causing this. When I compiled php with apxs it automatically added this line:
Code:
LoadModule php5_module modules/libphp5.so
I restarted apache, and also try adding this line:
Code:
AddType application/x-httpd-php5 .php5 .php4 .php
and then restarting.
View 2 Replies
View Related
Jul 13, 2011
For my project, I'm interested in the Scatterometer Products of Oceansat 2 from an Indian page [URL]
It's no problem for students to get a password to access and download their data for free. Nevertheless it's quite complicated to download the files by hand, since you have to mark every file by hand and click on a download button at the end of the page. When I tried it with my Script (which is below), and an internal server error 500 occured. I hope you're not too busy and could have a look on the script where the cookie and IP are entered manually for trial purposes.
The construction of the page is:
The adress, where you have to login:
http://218.248.0.134:8080/OCMWebSCAT...controller.jsp
The adress, when your're logged in:
http://218.248.0.134:8080/OCMWebSCAT...controller.jsp
[Code]....
View 3 Replies
View Related
Feb 17, 2010
I want to write a shell script which will simultaneously collect OS user information and write in an individual text files.Can anyone tell me the syntax of the script.N.B. The user name will be mentioned in an array within the shell script.
View 8 Replies
View Related
Jan 19, 2010
i installed a package with dpkg --install and told it to ignore an unmet dependency because the package it depended on could not be installed with apt-get (it was a perl module) and i have manually installed the perl module, it works... however every time i do "apt-get upgrade" or anything like that it wants to remove the package i forced to install because it still thinks there are unmet dependencies, is there a way to either tell it to ignore that the package has unmet dependencies (i mean ignore that always, not something i will have to add every time i use aptitude) or is there a way to convince it that the package it thinks is missing (the unmet dependency) is actually met.
View 3 Replies
View Related
