I am looking to put MPLab on my ubuntu 9.04 system with wine. I wanted to know if anyone has had any success with MPLab on wine and which version of MPLab you used with wine. I can get any version as far back as MPLab 5.0. If you know of any linux based versions of MPLab that would be helpful also.
I was experimenting WINE in my Ubuntu machine. After a while I've decided to remove it. I uninstalled the application that I installed using WINE (Steam - Day of Defeat). And then I ran the following command: sudo apt-get remove wine* I checked (using tab) and only wine, wine1.2 and wine-gecko where there to remove. After doing this I shutdown my computer. When I turned it on again everything was fine until I had to pass trough the login page. I've inserted my credentials and then when I clicked in "Login" it appears a dark screen and then again the Login screen.
I need to add some dll's to .wine/drive_c/windows/system(32) but I can't find the folder anywhere, I know it probably hidden and I have checked while showing hidden folders but I can't find it.
when I tried to install wine I got "Missing Dependency: wine-gecko is needed by package wine"so I looked for wine-gecko and download it but also when I tried to install it I got "Missing Dependency: wine-gecko is needed by package wine"it seems that I am in loop each package need the other what to do please?
Is there a way that i can tell if WINE is installed on my system or not. I tried installing the RPM and it says that respiratory already exists but i cant find it anywhere.
Trying to mount my NTFS file system (portable hard drive) so that is can be recognized by a program I have installed in wine (seagate manager). I've tried to change the mount point for the drive to /home/.wine/c_drive but that doesn't seem to do the trick, and messing around with the fstab file just results in error messages when I try to mount/unmount the drive.
who to change the mount point properly? /dev/sbd1 is my partition.
Either that or does anyone know how to configure wine so that it will find my drive? I've tried adding an e: drive to the drives tab and mapped it to mediaSimons' Seagate (partition label), but that doesn't seem to do the trick either.
I have recently begun contributing to the Folding@Home distributed computing project. Due to oversights in the application's design and to process the most advantageous work units, I need to run this command line app through wine. The application is very CPU/RAM intensive, but it does not put much load on the hard drive. It is multi-threaded and uses up to 100% of all 6 cores in my machine. I run it with a "nice" level of 19 with hopes that it won't slow down my normal desktop use.
Here is the problem... when running this setup, my system will frequently freeze for a fraction of a second and then resume. With the more complicated work units, this can happen 1-2 times per minute. During the freeze, the mouse will stop moving, videos stop playing, music pauses, etc. The system is completely unresponsive. However, each instance only lasts for a very short time. Since this happens so often, my productivity is negatively impacted (and it's very annoying).
I previously ran the native Linux version of F@H without this problem, but that was also processing much less complicated calculations. I have tried with wine 1.2.1 and 1.3.5 with the same results. The application does not have problems running on Windows. It has been suggested that the current Linux CPU scheduler is to blame, but is there anything I can do to resolve this now or work around it?
I've just installed Debian 8.2 KDE 64bit, installed wine, and found that a 32-bit Windows program (Agent newsreader) could not see the linux system fonts. (This worked fine on Kubuntu 14.04)
Since this is the first time that I've installed Debian, I'm not sure if I'm missing something obvious or if this is an actual bug.
Steps to reproduce: Fresh install of Debian 8.2 KDE 64bit. apt-get install wine wine wordpad # this is a small word-processor for wine that is supplied with wine menu -> format -> font all linux fonts are visible -- so far so good
Because I want to use a 32bit program, I now have to do this, I understand: dpkg --add-architecture i386 apt-get update apt-get install wine-bin:i386
But after that,if I run "wine wordpad" and look at the fonts, all the linux system fonts are gone. The only fonts visible are the nine that are built into wine (Courier, Fixedsys, Marlett etc..) So installing the i386 wine support seems to have broken something.
is it possible to install software from within a *nix system on a windows box, by letting WINE (is not an emulator) write to the windows own registry and use that software under WINE aswell as windows (xp).edit: im specifically talking about dualboot systems, where the windows partition is mounted in linux and accessable to wine. i already thought about installation in windows and after switching to linux just to install over the filesresulting in two different registries, would that even worK?
I have been pulling my hair out trying to find out why the Wine System Tray suddenly started appearing in its own little window when running Netmeter, cluttering up the desktop. I searched the web in vain, back many tears, most people saying they couldn't understand it when it happened to them.
Then I realized that the last thing I did was to stop Cairo Dock (the novelty had worn off!) and to move the Gnome Panel to the BOTTOM of the screen in place of Cairo. I suspected this was making the Wine System tray homeless.
So I moved the Gnome panel back to the TOP, restarted Ubuntu, stopped and restarted Netmeter and the Netmeter icon appeared back in the panel where it belonged.
Would I be correct in thinking that Wine System Tray will only stay in the panel if the panel is at the top of the screen?
I'm using a slack 13.37 version and this message is occuring during wine apps running:
preloader: Warning: failed to reserve range 00010000-00110000
Instead of being only a warning, I think it's breaking down and don't know exactly it's a wine or OS problem.
Googling point me a wine problem,
url
and another Ubuntu and Wine topics .
url
url
But I'm in a 32bits option ( no multilibs ), my wine, dependencies packages and procedures are the same installed before in 13.1 . Just system was changed! Anyone have any info on that sytem or wine problem?
How can I uninstall / purge wine and any wine installed windows programs?I've tried deleting .wine (hidden folder)but in /usr/bin/ there are a number of wine related files.And wine sub menu still appears in Applications menu
What should I do to clear WINE state in my system if it's already flooded with installed Win apps and lots of registry configs? Like WINE has just been installed and nothing more. No Windows apps, no configurations were made, clear registry, etc... Is it enough just to delete "~/.wine"?
while trying to get a game to work on wine I was surprised to find out that the wine version that ships with sid is 1.0.1 released in October 2005. So I installed the latest release I found at [URL] like this :
dpkg -i wine_1.1.42~winehq1-1_amd64.deb
The install failed, I think because I hadn't remove the old wine version, and that's when the joy-ride started. Impossible to remove wine to restart properly. (apt-get remove libwine wine and apt-get -f install didn't) After some googling I tried this :
This did install the wine version I wanted, and the game ran fine after that. However the result was a borked apt-get. Tried to remove wine again with the above commands, resulting in apt-get failing to do so because it tried installing wine-unstable and reported errors similar to these : E: Could not perform immediate configuration on 'wine-unstable'. see man 5 apt.conf under APT::Immediate-Configure for details. (2)
maybe my questions sounds funny: i'm looking for a very small (or better as small as necessary) distro which runs in a virtual box an starts wine.The reason is: we have new laptops in my school runnig windows7 64bit home and we have some software which runs only on WinXP. So why not take a virtualbox wich runs wine to start the old Software?
Lot of questions about WINE... When I'm done I'm going to make a HOWTO so that others can do what I did It's hard work, but I'm nearly done.The last problem I'm having is the WINE menu on GNOME won't show up after a install of WINE from a .deb package (it usually does). This was after I compiled WINE from source and removed it with "make uninstall" and "rm -rf /.wine".So now I installed the WINE from a deb package and the Wine menu entry is not showing up.I've tried re-installing Wine and rebooting my PC but nothing seems to work.
I have a problem running a game on a fresh Slackware64 install.
Slack version is 13.37
I've followed alien bobs instructions for a multilib environment from here:[url]
And then used sbopkg to download and compile wine version 1.2.2, which went through just fine.
After that I grabbed cabextract from sbopkg and ran this: wget [url] sh winetricks d3dx9 To get the DX9.
But, when I try to run the game, this is the error I get:
Code:
The game it self ran perfectly on the 32 bit version of Slackware, tested with 13.0. So now I think I'm missing some libs or something, but I have no clue which.
I don't know if it's just my system, but after applying the latest Wine update, the mouse cursor in Wine windows is now purple/magenta/pink, whatever. Not a big problem, just annoying. I've looked through the various config files in ~home and /usr/share/wine, and can't find any parameter that might even remotely address this.
I am new to fedora and installed wine to see if I could get the sony reader software working (required to access sony bookstore from my sony ereader). Well the program did not work though it did create icons on my desktop. wine kept crashing and I said lets just get rid of it. I uninstalled wine via yum remove and nothing appeared to happen so I did rpm -qa |grep wine and saw lots of stuff. So I simply did yum remove wine* and then a rpm -qa |grep wine was empty. however wine is still under applications on my desktop and still has a category for programs--reader. I should also mention that while wine was installed I attempted to remove the reader via the wine uninstalller but a) wine gave a message of a core crash and b) all the uninstaller did was give me the option to reinstall the reader program. so now when I attempt to open an epub it tries with the sony reader software. I know I can just right click to use another program but for now I want wine gone completely from my pc and the sony program gone.
I opened KPackageKit in my new Fedora system. I want to get wine. The description says "A Windows 16/32/64 bit emulator". But wine stands for Wine Is Not an Emulator.
My problem is that I need to move a moderately complex system from an old system to a new system. The old system is a core 2 duo running on an asus p5k-se (p35 chipset) M/B, Nvidia 8500 gt, 3 x sata II hard disks, 1 x sata dvd, 1 x ide hd, 4GB ram. It runs opensuse 11.1 kde 4 as a desktop system + samba server, apache server, database server + other non-opensuse software. In addition some of the opensuse software is not the default 11.1 versions as later versions were required. The nvidia driver is from the nvidia repo. There are several file systems, some under LVM.
The new system will be a core5 760, asus p7p55d-e M/b (p55 chipset), nvidia 240, 3 x sata II HD, 1 x sata dvd, 4GB ram and possibly 1 x ide HD. This M/B also includes USB 3 & sata III. I have no USB 3 devices but this may eventually change. I have no plans for sata III and believe that it may be better to attach any sata III SSD to the sata II bus.
What I would like to do is to move the hard disks from old system to the new system. What I would like to know is, if the system is left at 11.1, is the system likely to work with the new hardware. If the answer is no, if the system was upgraded to 11.3, would the transfer of the hard disks then work? In order to upgrade from 11.1 to 11.3 using the DVD i believe I should get rid of all non-default repos. I assume that I should also get rid of anything that was installed from them, e.g. the nvidia driver and any software versions installed manually outside RPM. Also is there any default 11.1 software that should be removed either before or after the upgrade to 11.3
My system decided to crash on me, hard. It was humming along happily for about 2 months and now doesn't boot. If I boot from hard-disk, I get grub. Launching the first kernel choice hangs. I thought maybe the install was corrupt, so I booted from usb install disk. The usb hdd didn't boot; something about an error trying to access /dev/sda . Unplugging the internal disk and plugging in the usb install disk does result in the system booting. Plugging in the internal disk in a running system usb-booted system does not result in the system detecting the disk.
How do I know if the disk is physically broken? This seems unlikely since it does manage to launch grub consistently. Or is this still possible? How can I try to mount whatever is left? The usb install disk doesn't even list the /dev/sd*. Any pointers on how to reformat the drive if it's not being mounted?
I am trying to use xfire with wine. I downloaded the xfire installer and i already have wine installed, and i right clicked the xfire installer and opened it with wine, i followed all the steps to install, and when i finished and tried to open xfire, nothing happened.
as soon as i start a windows app or go into the wine config the sounds coming out of ubuntu just stop and the only way to get them back is to restart. does anyone know how to fix this?
I went to the Wine HQ website & I did the step by step how to install wine on Ubuntu 9.10. This is the log from the terminal
Code: warren@ACER-Aspire-9300:~$ sudo add-apt-repository ppa:ubuntu-wine/ppa Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /etc/apt/secring.gpg --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --keyserver keyserver.ubuntu.com --recv 883E8688397576B6C509DF495A9A06AEF9CB8DB0 gpg: requesting key F9CB8DB0 from hkp server keyserver.ubuntu.com gpg: key F9CB8DB0: "Launchpad PPA for Ubuntu Wine Team" not changed gpg: Total number processed: 1 .....
The following packages have unmet dependencies: wine: Depends: wine1.2 but it is not going to be installed E: Broken packages warren@ACER-Aspire-9300:~$
I have uploaded a newer edition of WINE through a ppa to 'sysyem-admin-software sources', but would like to know how to update wine so that it utilises this ppa upgrade as i cannot get linux to recognise the update.