I'm trying to configure sending mail from my site under Ubuntu 10.04 LTS.I have installed LAMP and postfix. To test mail I created the file test.php with code:
PHP Code:
$to = 'mymail@gmail.com';
$subject = 'The subject';
[code]....
I'm running SUSE linux Server version 11. I want to configure mail server with postfix & cyrus-imap. For that, i have read many documents in Internet by i met issues. I'm running DNS in this server & it's ok Now I cannont send mail through command line.
[Code]....
I'm using Ubuntu 10.04 with Fluxbox.
Since I installed Chromium-browser, it has been set as the default system browser (don't know why, don't know when, maybe I clicked accept somewhere without paying attention). Now every web link I click (for example from Skype), Chromium will be opened instead of Firefox.
How can I make Firefox my system default browser?
I need to set this preference using the command line.
I have two Roboards that need to communicate with one another. I have sucessfully installed Ubuntu 9.04 using the 386 kernel based on instructions found online.I can use the GUI to set up an Ad-Hoc network using one Roboard ("Create New Wireless Network"), call it Manet, and connect to "Manet" using the GUI on the other Roboard and ping/ssh between the boards. However, when I try to create the same wireless network using the command line using:
ifconfig wlan2 down
iwconfig wlan2 key off essid 'Manet' channel 5 ap any
ifconfig wlan2 up
I don't see any entry in iwconfig under "Cell". It keeps giving me "Not Associated"When I try to enter the same information on the other Roboard to try to connect to the network, it doesn't connect and under iwconfig, I don't even see any entry for ESSID. Could somebody please tell me why it works when I use the GUI and not the command line.
Does anyone know why Nautilus would allow me to login to a server but not display any files, but when I log in via the 'ftp' command-line binary, it works and allows me to display all the files, make directories, etc.? I was able to login via FileZilla too.
Here's part of the log:
Code:
Response:220 Microsoft FTP Service
Command:USER ----
Response:331 Password required for ----.
Command:PASS ***********
Response:230-Welcome to the Alentus FTP server.
Response:230 User ---- logged in.
Command:SYST
Response:215 Windows_NT
Command:FEAT
Response:211-FEAT
Response:SIZE
Response:MDTM
Response:211 END
Status:Connected
Status:Retrieving directory listing...
I am trying to send e-mail from command line by using "mail" in fedora. It goes to e-mail server in the same network but it is refused by other outside this network with message: "..... Connection refused by name@yahoo.com ......
View 1 Replies View RelatedI have kubuntu 9.10 and I would like to configure Ubuntu to can send mail from command line with mailx. I've saw that I need to install a MTA. But I don't know wich install and how.
I follow this tutorial:
[URL]
But when I try to send a message, in the mail.log says me:
Code:
Jan 5 10:21:33 david postfix/smtp[3795]: 41AEA41DBE: to=<pepelu@gmail.com>, relay=alt1.gmail-smtp-in.l.google.com[209.85.223.73]:25, delay=1086, d
elays=1022/0.01/32/32, dsn=4.7.0, status=deferred (host alt1.gmail-
[Code].....
I have just got myself up and running on a ubuntu 32 bit server with postfix using this guide here [URL]...at-ispconfig-3 and everything is working great ( i didnt install ispconfig )
I want to get a command line mail client running but I am having some permission issue.
sudo aptitude install heirloom-mailx
then when i type mail this happens
mail
/var/mail/jj: Permission denied
i also tried mutt etc but always get permission denied.
Having an odd problem running a mysqldump via crontab. I have the script running on other servers and they work fine, so not sure how to actually troubleshoot, but the script looks like the following;
If I run it as a cronjob as root, it finishes in a second and a 20k file is there. If I run it from the command line as root it does the backup (takes a few minutes) but does complete the backup and can be unzipped and read successfully.
I have a very simple gawk script to add commas to numbers to make them more readable:
It works perfectly from the command line, but when run from cron it doesn't add the commas.
I want to send a simple mail from my terminal
I'm using opensuse and a Know that I have postfix installed...
I don't know what I need configure first...
I know that I need a SMTP server to send e-mails write?
When I try send e-mail with the command mail I received this message :
Code:
mail -s "meeting reminder" -c professorgenival@hotmail.com micromerces@gmail.com
mailq:
Code:
(host mx4.hotmail.com [65.55.92.168] refuse to talk to me: 421 cannot conect to SMTP server.
I was reading about fetchmail But I can't understand....
Code:
This won't work in a script but it WILL work on the commandline...
Here is my output when I try the script:
Code:
Also, what is the at the end of the path in the error?
How can I verify JavaScript on a site (not on the same server) is working from command line access of the URL?
On checking some of what was written in 2005 I find most of it isn't still relevant (if it was then - I noted the w3m-js stuff mentioned in 2005 hadn't been updated since 2003).
Since then a couple of times I've looked into it but didn't make much headway but also didn't spend a lot of time on it. So far as I could tell from other posts I'd seen others hadn't either.
Recently I found out about Mozilla's SpiderMoneky js library and that it could be linked into elinks text browser and did same on my RHEL5 system.
I found Spidermonkey rpms in the EPEL (Fedora sponsored) repository:
js-1.70-8.el5.i386.rpm
js-1.70-8.el5.x86_64.rpm
js-devel-1.70-8.el5.i386.rpm
js-devel-1.70-8.el5.x86_64.rpm
I was able to download and install using rpm then compile elinks from source to include the above. Running elinks version after that shows the ECMAScript support is compiled into the new elinks binary. Also setting various ecmas* flags in the elinks.conf does have effect so clearly it is using them. (As opposed to another system where I use the original RHEL5 provided elinks RPM it complains about the ecmas* stuff being invalid options.)
It appears that by default it has this enabled but just for good measure I added:
set ecmascript.enable = 1.
Despite that when I pull up the page I see:
This product requires use of a browser that supports JavaScript
As a test I set the above to 0 on the off chance it was backwards and saw the same thing.
I then set the following:
set ecmascript.error_reporting = 1
On pulling up the page I now see a popup box:
Quote:
JavaScript Error:
A script embedded in the current document raised the
following exception:
TypeError: Window.Focus is not a function
OK
That seems to suggest that despite the earlier message about needing a browser that supports JavaScript that it is in fact executing at least one JS but that it is getting an error. Can anyone confirm that?
Does anyone have any idea what I�d need to do to deal with the Window.Focus message?
Essentially the site is a login page and even though I am able to input username and password after opening in browser when I tell it to POST it simply returns to the same login/password page.
And of course it doesn't have to be elinks/spidermonkey. I'd be interested in finding out if anyone knows a way I can verify a site that is running JavaScript is actually responding properly from command line rather than via a browser?
The SpiderMonkey stuff from Mozilla when compiled into elinks is supposed to do that but given my results Im not sure if it is or not.
Most of the documentation I can find on JavaScript stuff appears to be aimed at developers testing their own JS code from command line rather than accessing a web page with JavaScript.
I'm writing a Bash script to take IPTC keywords from a text file and write them, via Exiv2, to several (first batch is 100) JPEG files in a single directory. The script has one while loop inside another while loop, both terminated, but I'm pretty sure that's not my problem. I think it's how I'm incrementing the "counter" variable, although it could also be the method of parsing the text lines from the file (using cut with delimiters that have worked fine in simpler scripts).
Here's the code as I've worked it up to this point.
Code:
And yes, "keywords" checks out in Crimson Editor, Emacs GUI and nano as an ASCII file with UNIX line endings. No issues on that score.
Feeding each line consecutively into a terminal (excepting the exiv2 command) works fine: each variable echoes with the part of the text line used as a variable value as it should, even when the b variable is incremented the quick&dirty way (up arrow three commands and hit enter).
Running the above script in eval mode (sh -x) stalls after setting the b variable to one and reading in the first line of text. I'd like to know why. I'd also like some advice on another reliable method of parsing the read-in lines.
So, in finishing my nFlux slack current edition.I have set it up for users to do certain things in console
and one of the things I want is a way to view slackbook-2.0 in runlevel 3 console.I cant find a pdf reader that works in command line mode and I cant figure out how to either convert slackbook 2.0 pdf into html/text Or find a slackbook download that is html or text?I tried converting it using pdftotext, which didnt work very well So, I need a command line pdf viewer or a converter that works good?
Is there an easy to use program that I can use to send mail from the command line? I want to be able to create a batch script to send mail from different text files. What I'm looking for is something like:
mailapp mailserveraddress destinationmailaddress mymailaddress filetosend
I want to delete all may mail root in command line and i don't find this... the command mail + "d" work fine but i want use it in a .sh
I explain too : I use fetchmail to have mail from a gmail box, and use RIPMIME to save the attachment in a folder... these work fine, but the i want delete these mails.
I am using Ubuntu 9.10 and when I tried to send mail from the command line I get: /usr/lib/sendmail: Permission denied. any takers on this.
View 6 Replies View RelatedI have installed CentOS 5.5 with no GUI - how do I enable/setup the "mail" client command to be able to send email via my Exchange 2007 mail server on my LAN?
View 1 Replies View RelatedI've successfully mounted a network share with mount.cifs for the past 2 years using fstab with credfile.
[Code]....
Yesterday I moved this system to a new datacenter, but did not alter fstab or the credfile. The //server/share directory has IP rules in place, but this was updated with the new system IP while we moved the system. Now, I am mysteriously unable to automount //server/share. The local error is 13 (permission denied). The Windows server we are mounting returned a code that is defined as "username is valid but password is incorrect" Again - no changes (content or permissions) were made to my credfile or fstab entry. I've restarted netfs a few times, including rebooting the system twice. What is baffling is I can successfully mount //server/share via command line: Code: mount -t cifs //server/share /mnt/mycooldir -o username=foobar,password=1234
The username and passwords are identical in credfile and the mount options - I copied & pasted username / password from the credfile itself.
Writing script to create backup of file by adding datetime to file name. Basically test for file presence if there, cp with datetime then rm original cp works fine from command line but get cannot stat `full path to file': No such file or directory
Code:
Here are the errors: cp: cannot stat `~/html/CVP_dadamail/.dada_files/.logs/errors.txt': No such file or directory rm: cannot remove `...': No such file or directory
The for statement is a placeholder as I have same file to backup out of several directories. using "bash -x scriptname" -OR- inserting echos, I can see I've constructed the strings properly. Believing it might be related to the hidden directories, I tried setting the shopt "glob" options to no avail.
Ultimately I'll add the other directories to the for loop and then run this from a cron job, so if you see potential pitfalls knowing I'm headed in that direction...believe construct would be
Code:
I'm running a desktop-less version of Debian via Sun VirtualBox. The reason I'm doing this is because I don't have enough graphics or RAM power to have a desktop environment running on top of my current desktop; also, I want to learn Linux through the command prompt. I'm running the AMD64 version of Debian; I'm not sure if that's relevant.
My main goal is to be able to email useful files from the virtual Debian to my main computer, so that I can save them for later if I ever decide to do a "real" installation of Debian on this computer. I realize now that there's probably some "easy" way to do this by reading the virtual machine's hard drive, but at this point, my curiosity wants to see this issue resolved. I started off wanting to find a command-line program to send my email with, and one was built-in. The syntax ~$ sudo mail -s "Subject" email@yahoo.com "This is a test email."
C^D
Cc:C^D ~$
is what I found. I tried it, and (unsurprisingly), it failed. I then learned that the mail command calls exim4, or something along those lines, so I needed to configure exim4. Soon thereafter, I learned that Yahoo's SMTP wasn't public, but Google's was. So, I found this web page which described how to configure exim4 to allow for email to be sent to a Gmail account. I made one, and followed the page word-for-word.
I sudo-mailled a test email to my Gmail account, and nothing happened. I waited a bit longer, and still, nothing happened. Finally, I started looking around, and found out about the exim4 logs in /var/log/exim4. In my mainlog, I think that it's telling me that Google denied my connection: <date><time><random numbers and letters> == **********.gmail.com R=send_via_gmail t=gmail_smtp defer (111): Connection refused
So, now, I'm just stuck. I don't know what I did wrong, I checked my exim4.conf.template twice for spelling errors, but I don't think I made any. At this point, I can only hope that someone else has had a similar problem, or knows what I'm doing wrong (or haven't done yet).
How can I send gpg encrypted mail automatically from the linux command line?
I'm a little stumped on this one, I've tried using mutt but it doesn't encrypt mail unless it's used interactively.
Does anyone know if you can use the build in mail command to do this some how?
I'm am not remotely familiar with the linux operating sytem and just need a simple 'cut and paste solution' that will allow me to send .gz files as mail attachments, from the command line.Recently I moved my website to new hosting company, they are using cpanel and I have set up a couple of commands; the cpanel scheduler runs them for me as required.
1.creates an mysql dump and saves it to folder ( in root of my space )Works fine.2. delete the file created above, after 15 mins. Also works fineWhat I really want to do is email the .gz to myself before it is deleted, this is were I am stuck.This is possible ( I believe ) but it is beyond my understanding and ability to write the scipt/command that will make this happen.Please make any instructions really simple and clear as I am really new to this.on the server and this information is provided below and may be helpful to you (but I certainly to not know anything about this type of stuff)
I'm having a problem with my mail. When I send mail, it takes a long time for the send to complete.In the below, datestamp is just a simple script to put in a no-white-space date/time stamp.
Code:
$ datestamp ; mail woodnt; datestamp
02-05-10@193844
[code]....
I have recently installed Ubuntu 11.04 from the alternative installation CD; the installation was just the command line system. On top of this I have installed xorg and awesome window manager. The only problem I am having is with sound; I am unable to hear sound played through both browser-based Flash and locally stored files.
Is there something that I have to do before I can use sound? Edit: I have solved the original problem however I would like to know if I can remove pulseaudio as it seems that I am only using alsa.
I am attempting to write a very basic script that monitors a server's load and automatically emails an administrator upon the load reaching a certain threshold...
1.) `uptime | awk -F ' ' {'print $10'} | cut -d ',' -f1 | awk -F '.' {'print $1'}` -- the output from this command results in a decimal figure, so when that value is parsed and placed in an if statement, the value is not seen as a number. load-monitor.sh: line 9: [: 4.96: integer expression expected/How can I allow a number like "4.56" to be seen as an actual number within the if statement and be compared to 4, for instance?
2.) I am running a cPanel server on CentOS 5.4 -- when I run mail -s "SUBJECT" $EMAILADDRESS the command just hangs, and stracing the process shows it stuck on a read syscall.
3.) If I wanted to write this script in PHP, I have one primary confusion -- how can I mimic the functionality of obtaining the output from uptime via awk, etc. so that I can determine what the server load is at a given time? Which PHP function(s) would assist in that regard?
Can anyone tell me what the pros and cons are between heirloom-mailx vs mailutils? This is for ubuntu 10.04 LTS. AT this point my only purpose is to use the mail command line program to occasionally send log output to email aliases.
View 2 Replies View Relatedi've gotten my fedora 12 to the point where i can run python3 scripts from command line and can call up python 2.6.2 idle with the command 'idle' from command line. what command will call up python3 (3.1.2 to be exact) idle?
View 5 Replies View Relatedi have been using ubuntu for a while now and i need some help with my cursor selection option.when i change my pointer through system -> preferences -> appearance -> theme -> customize -> pointer,the pointer only seems to work in a browser window. any other place and it switches back to the default pointer.. does anybody know how to fix this??
View 4 Replies View Related