I've attached 2 Screenshoots from gparted. I have 50GB unallocated free space in my disk and i want to make a new partition,but when i try to do it i get an error message saying i can't create any more partitions in this disk. I don't know if this provides any usefull info but when i creating the linux partition,from the ubuntu disk, i selected the option "Primary" instead of "Logical"(or whatever it says) at the partition type
I have 3 Ubuntu installations & a PCLINUXOS, plus Windows XP installed on one hard disk. I still can boot to each one of them and can mount each one using Ubuntu.
The problem "may" have occurred when I reduced the size of some linux partitions using gparted. I still have plenty of space in each of those partitions.
When I started gparted all of the HD was unallocated. I did that from each ubuntu installation and the PCLINUX installation, plus LIVECDs. All indicated the space was unallocated.
When I did an fdisk -l from a Puppy Linux LiveCD I got a normal start and ends of each partition.
When I tried it from Ubuntu installation or live cd, I received the following types of responses:
Code: ubuntu@ubuntu:~$ sudo fdisk -l /dev/sda5
Disk /dev/sda5: 28.5 GB, 28566397440 bytes 255 heads, 63 sectors/track, 3473 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System ubuntu@ubuntu:~$ sudo fdisk -u /dev/sda5
The number of cylinders for this disk is set to 3473.There is nothing wrong with that, but this is larger than 1024,and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Plus the Windows partition seems to go over its limits.
Since all of my OS installations are still working, I don't know how critical this is. From reading another post, I understand this might be able to be fixed by making some changes in fstab.
I have what is a weird problem, at least I think it is. I deleted some files and now my partitions do not show up in Gparted. Instead, the entire disk shows up as unallocated space. I am still able to run every partition, one of which is ubuntu and another which is Windows without any other apparent problems. here is my fdisk -l:
I was moving and resizing my Ubuntu partition and for some reason my hard drive stopped reading and royally screwed my partitions up.I know there is a command line tool in linux where you can view what partitions could be there and choose to ressurect them etc. but i cant remember what its called
I just wiped my HDD and installed Windows XP (35gb Partition) and then Ubuntu 10.10 (75gb Partition ext4) and I want to know if it's possible to make my XP partition a bit smaller, like 20-25 gb, and then add what I take off to the ubuntu partition,because I won't be using xp that much, only for things that I know work on windows only.
My harddisk had one extended partition, sda2, split into several logical partitions: da6,sda5,sda7,sda8,sda9 in this order. sda6,sda8,sda9 were [the only] PVs in one [and only] volume group.
I tried to delete sda7 and to resize sda5 (both unrelated to the LVM setup) to take the freed space. I entered both changes in GParted and clicked 'apply'. It gave some error, but had apparently deleted sda7, without resizing sda5. I tried to resize sda5 again, it again gave an error again, but sda5 was resized. I did not save any logs from GParted. Then I saw that the partition names had changed to sda8,sda5,sda6,sda7, in this order.
Now when I run 'vgdisplay', I get the error "Couldn't find device with uuid ....". Running 'blkid' gives the uuids of sda5,sda7,sda9. According to GParted and fdisk, sda9 does not exist. Also, according to blkid, the uuid of sda7 is what used to be the uuid of sda8. I am very confused. As you could expect, I don't have backups, so... (I am now creating a copy of the whole disk, in case things go even more wrong)
I have a little problem. As soon as I boot my computer, Grub gives me an error 17. It happened after I tried to resize my Windows partition with a program. I have a dual boot between Windows 7 and Ubuntu 9.04.I've tried everything I could find on this forum and on the rest of the internet, but nothing was working. Most of them require a Windows CD (god knows where it is) or reinstalling grub and all that stuff, but it's all not working.I'm currently on a Ubuntu Live CD. Gparted doesn't detect any of my partitions, but just says 232 GB unallocated space. Palimpsest Disk Utility and the Explorer see all my partitions though EXCEPT my Windows 7 partition I tried to resize.
I currently have Xubuntu and Mac OS X on my PowerBook G4, however, I recently got a netbook and use Ubuntu via USB on it and now would prefer to have only OS X on my powerbook. I would like to use Gparted to restore/fix my partitions and don't exactly know what I need/don't need and also how to resize my os x HSF+ partition back to full size? An image below shows my current setup (kinda messed up I think.) What steps should I take in Gparted to delete the unnecessary partitions and give OS X it's full size?
I decided a few days ago it was time to reinstall ubuntu since Lucid looked fun and interesting. Everything went really well (my table functions even worked with no configuration!) until I decided I wanted to resize my linux partition so I could install a win 7 virtual machine. I had some issues getting gparted to let me expand my partitions into free space, so I started diking around with various settings commands and I managed to screw up my partition table badly enough that I needed to boot with the live cd. After a few hours in panicked trouble shooting mode, I finally got grub reinstalled and managed to boot things regularly. But now Gparted is completely nonfunctional; it shows the entire HD as unallocated and says "can't have partition outside of disk". Apparently one of my partitions is oversized.
Here's my output of fdisk -lu and sfdisk -d: sudo fdisk -lu Code: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x5c5ef856 .....
I want to resize and eventually remove some partitions on my drive but I need to know how this will affect grub and what to do if I need to fix it.I currently have 3 standard partitions and 1 extended partition on a 160Gb drive.
1st Partition -Windows XP about 60Gb with about 35Gb used. NTFS
2nd Partition -Ubuntu Lucid 10.04 amd64 about 40Gb, 22Gb used ext4
3rd Partition -Linux swap about 2.5Gb
Extented Partition -Ubuntu 9.10 about 49Gb with 23Gb used ext4
I'd like to shrink the Extended partition down and add the space to the 2nd partion where Lucid is. Eventually, I'll want to delete the whole extended partition and add all the space to the Lucid partition.
After using GParted to resize these partitions, what will happen when I boot? Will I need to tell grub where the swap and 9.10 are? I am not changing the start of the first two partitions so I would assume there will not be any problem with them (I'm not sure how moving the start of the swap might affect the Lucid installation though).
Gparted does not recognize my intel ICH7 fake raid 0 partitions rendering it useless. Am I missing a package that will add this? I know the live disk can do this. Is it something to do with dmraid? using 10.04 64 bit ubuntu
i installed win7 ultimate on a 2TB HD and was hoping to dual-boot it with meerkat, i did a standard install and shrunk the partition using win7 disk management to leave 500GB for ubuntu.problem is ubuntu can't detect the existing win7 install, when selecting advanced setup it just shows one big unallocated partition.
i went back into win7 and extended the partition again, then booted into ubuntu live cd to see if maybe gparted would do the trick. gparted also cannot detect the existing win7 install and just displays unallocated 1.82TB.in terminal if i do 'sudo parted /dev/sda print' i get this message:
Warning: /dev/sda contains GPT signatures, indicating that it has a GPT table.However, it does not have a valid fake msdos partition table, as it should.Perhaps it was corrupted -- possibly by a program that doesn't understand GPT partition tables. Or perhaps you deleted the GPT table, and are now using an msdos partition table. Is this a GPT partition table? Yes/No? ^C
I have installed ubuntu many times before and never encountered this problem. The installer shows partition sizes which do not match my current sizes at all. This occurs during LiveCD too, I have taken a screenshot of the problem. GParted seems to be showing incorrect partitions while the one the right is correct.
I will be installing Ubuntu Server 10.04 LTS. The partitioning install section is text based and IMO a bit cryptic. I was wondering: Can I first set up my partitions with Gparted live disk and then pop-in the server install disk and install using the partition structure I made with GParted?
Basically, I would like to have a separate /home partition on my hard disk that will be shared by two different Ubuntu releases. In other words, I would like Maverick and Lucid to be on their own separate partitions, but to share the same /home. I already have Lucid installed (no separate /home). I know how to use GParted with the Live CD in order to edit partitions, but the main question I have is how do I migrate my /home folder to its own partition without ruining data? I've skimmed through some GParted tutorials but they don't exactly detail what I want.
Once that is done, I need to know if it is possible for Lucid and Maverick to share the same /home partition, and how would I set that up?
I installed linux to my whole hard drive. I want to make it a little smaller to dual boot windows just for games. Gparted wont let me resize my partitions at all.
I resized all of my partitions using GParted, I got Windows 7 and Vista to boot up again ok but I can't get F11 to boot. I am not using GRUB nor do I want to, I tried using the install disks and doing a repair and "chroot"-ed my filesystem and everything is still there, there is just something small missing that I am not remembering to do. I have the NST files on my Windows drives and it tries to boot but F11 complains that there is no boot disk. I'll try to boot once again and write down the exact error message.
I do not know what I have done but I used to be able to see the partitions on Hard Disk wich has WinXP and Ubuntu 10.04 as well as other partitions I have created.
I can access the partitions but cannot any longer see them with Gparted. Enlosed 2 screenshot ( Gparted and Disk Utility which shows the partition)
Gparted LiveCD version 0.6.3-3. boots and loads GUI, then searches endlessly for partitions. No luck running it from command line either. Dell laptop set up to dual boot, Windows XP/PCLinuxOS. I want to shrink the Linux Root partition to give more space to the Home,
After I formated my windows partition using GParted it became Unallocated and moved under Extended partitions. I can't create the unallocated partition as primary one, or drag it out of the extended ones. I tried GParted live CD also, but nothing worked.
I have a windows box running w2003 server on 1 volume with 2x ntfs basic partitions. c: = the windows bit, d: = the data bit for user data.I have cloned (clonezilla) the volume to another and deleted the data (d bit and want to extend the c: into the freed space.I'm booted from a partedmagicv5 cd and using gparted to attempt this.I can't see a way to do this with gparted but then, I could be thick. Maybe I clone off reformat and copy back?Is there a better way or even is this the correct forum (please don't refer me to Microsoft website:-) for this type of question?This is a test box so not worried about breaking it, but the test is to try to solve a live problem at a school I support which is running out of hd space.
I have logical partitions on my drive numbered /dev/sda5 through /dev/sda14.I want to reclaim unused space from one of the partitions in the middle /dev/sda7. First I intend to resize /dev/sda7 by leaving the beginning of the partition as is and shrinking the end to create some unallocated space between /dev/sda7 and /dev/sda8. Then I would like to create a new logical partition in this unallocated space. My question is what will be the device name of the newly created logical partition? Will it be /dev/sda15 (I hope)? Or will it be /dev/sda8 and all partitions after this be renamed?
The GParted manual states that if a partition is deleted, all of the following partitions will be renamed, but it doesn't say anything specifically about renaming partitions after adding a new partition in the middle of a partition table.
I am trying to partition my unallocated part of the disc in my laptop in ubuntu 10.04 using Gparted.Here is a screenshot of my disk and its partitions:
when i select the unallocated space i can ONLY create a PRIMARY partition..the LOGICAL and EXTENDED ones are grayed out.. i want to partition this unallocated space in two or three parts, and it seems i only have one (out of the four) primary partitions left.. so i cannot create the partitions i want!
So, my GParted (Ubuntu) won't create an NTFS partition (the option is greyed out). I'm trying to create an NTFS partition to allow for a Windows 7/Ubuntu dual-boot. Everywhere I check, they suggest either creating the NTFS partition in GParted BEFORE installing Windows OR leaving it "unallocated" with the Linux partition after it.
I have tried both now, with two results:
1) GParted can't create an NTFS partition within Ubuntu 9.10.
2) On the other hand, the Windows 7 Installer says that Windows can not create a partition or find a partition when I attempt to select the "unallocated" portion.
how to create extended ext3 partition using GParted? Every time I select "New" for unallocated space I can only create primary partition. Other options (extended and logical) are always greyed out.
I'm running a modified version of OpenSUSE 11.1 from the susestudio builder. I've run across a weird issue whereby gparted is unable to create anything more than an hfs filesystem.
It seems that the package libparted simply doesn't exist in any of the repositories I'm using. I am figuring this would affect what gparted is able to do, although I'm unsure since the program itself runs fine.
I am trying to create a partition using gparted for my centos installation but I accidentally deleted my partition table. my partition was created on windows7 and dual boot with ubuntu. I am trying to recover it using test disk with ubuntu live cd but after I recover it still I neither can't boot on windows or Ubuntu here is the result of patition quick seart
I'm new to learning about computers and different OS's, so I decided to get my feet wet. I've been trying to dual boot ubuntu on my laptop with windows 7 currently installed, and I've gotten to the stage where I'm creating the partition devoted to ubuntu.
When I opened Gparted, it didn't read my partition information correctly. First off, it reads two of the files as "unknown" under File System. Second, the labels don't match the disk space. For example, according to my windows disk manager my C: drive is 218.88 GB, but according to Gparted, the 218.88 GB drive is labeled "recovery". It doesn't add up.
I tried posting on the Gparted forum but no one's responded. Next, I tried creating the partition on windows disk manager, and when I boot ubuntu from the CD to install it, I get to the "partition selector" screen of the install process and it still doesn't read my partition info correctly.
I'm stumped, and more than a little bewildered. It's like my computer is schitzo. The Windows side reads the partitions as fine and healthy, and the Ubuntu side can't even read the info properly. I was hoping someone out there knew what was wrong, or if someone could ask me specific questions to help troubleshoot the problem. Or maybe this problem is already solved and I just haven't found the right thread.
I'm trying to install Zorin OS to my computer, but I can't create a partition on my HD to get it to work. This is my first attempt at having multiple OSs on my computer, and my first delve into anything Linux, so I'm sorry in advance. My problem is that my computer (running Windows 7) already has 4 partitions, so creating another for Zorin won't work. I'm attaching a screenshot so you guys can see the partitions I have at the moment.I really hope to figure this out tonight so I can start to explore the OS asap!
