I've used Ubuntu 4 years ago now I'm installing a new version. How do I get the X Window environment setup, instead of Windows environment that I'm seeing ?. I need something like KDE and XTerm.
View 2 RepliesWhat is the difference between desktop environment and window manager?
View 3 Replies View RelatedI have setup Ubuntu 9.10 ltsp server, and have the client connected with login screen. I can log on the client successfully , but I did not get to the window environment, just see a busy mouse pointer on client screen and the screen of the server is scrambled ... and not viewable. I built the image by ltsl-build-client The server is amd64 version and the client is i386 version.
View 1 Replies View RelatedBefore setting up a dedicated web- and mail-server system, I want to learn it by setting both up on my desktop environment. So far I can only find how-to's which are based on server install iso's.
Is it wise first to install a mail server by using i.e. [URL]. Get it up and running and then install a lamp server using [URL]
Both servers must use my own IP address which is related to my own domain xxxxx.com I also need to understand how to incorporated these.
My desktop is Ubuntu 11.04 2.6.38-8-generic x86_64.
I'm trying to setup a PXE boot environment.Now the diskless machine reads in vmlinuz and initrd.lz from the /tftpboot directory of the dhcp server machine (host name: antilop, runing slackware 11.0).There is a NFS export named /usr/data/ubuntu on antilop (which can be mounted from the client when runing mandriva mcnlive Toronto)When I'm trying to boot with PXE, the kernel and initrd starts, eth0 gets a valid ip address.Then a lot of error messages appear saying: NFS over TCP not available from 192.168.1.48 <- this is antilop, my DHCP server and NFS server too.
Here is the content of the /tftpboot directory:
-rw-r--r-- 1 root root 34 2010-02-11 20:49 boot.txt
-rwxr--r-- 1 tjp users 75564 2009-10-05 16:08 gpxelinux.0*
-r--r--r-- 1 root root 5755032 2009-10-28 00:00 initrd.lz
drwxr-xr-x 2 root root 2592 2010-02-12 12:59 pxelinux.cfg/
-r--r--r-- 1 root root 3890400 2009-10-16 00:00 vmlinuz
Here is the contents of my /pxelinux.cfg/default:
default aaaa
label aaaa
kernel vmlinuz
append boot=casper netboot=nfs nfsroot=192.168.1.48:/usr/data/ubuntu initrd=initrd.lz
There is no process listening on tcp port 2049 (on antilop)I asked my friend google but it didn't give a satisfying answer so far.Some said that no nfs-over-tcp exists on slackware, some said nfs clients trying over tcp must fallback to udp.
I have been looking around the web and forums for a while for the best way to set up a development office. I havent really found many specifics. I am with a new company is just starting to really take their development services seriously. We've added a couple developers and designers in the last month. I am trying to figure out a the best way to set up our environment.
We have a couple dedicated virtual servers with Media Temple. Currently, we develop everything under a subdomain of a domain we set up for development. When the site is ready to go live we move the site to its own domain. I cant believe this is the best way to go about things. So, what do you guys suggest as a setup? Software, versioning, etc. We have the ability to setup a test server in house and then push out changes to the production server but not really sure if that is needed.
We do mainly Wordpress development. If this should be posted in another area,
I have setup samba and shared /var/www/html on a shared folder so that i can access the folder directly via my IDE, however i cannor write file in there, is there any better way of doing it ?
View 1 Replies View RelatedI have a SONY digital voice recorder Model ICD-PX720. Its driver only supports Window environment and thus I have not been able to transfer the recordings (lectures) to my notebook for eventual burning on to a CD. Is there a driver or any alternative
View 3 Replies View Relatedhow to to setup a PXE boot environment. The server contains a LUbuntu 10.10-installation the client is Ubuntu 10.10 Server (I didn't mix up those two...) So, everything is going fine; the client gets an ip-adres, and boots over PXE. The login-prompt is shown. Problem: I can't login. It seems my users are deleted (better not copied). Of course the system (client) works fine when I boot the system from it's harddrive. The only thing I can guess, there going something wrong with:
[Code]....
I can setup variables in ~/.bashrc for my own shells. I can also setup variables globally in /etc/bashrc.but then how do I setup variables for a group in Linux? So that users who belong to this group will see the variables, but not others?
View 2 Replies View Relatedi need to setup a demo desktop environment for ppl to try out a java based gui. i need to put this demo on a VPS server, run a vncserver, and use a web-based vnc viewer for ppl to access to it. what is the best desktop environment for this case, 1. my vps server only has about 200m memory left 2. i need to have java swing set running 3.it doesn't have to be cool, but it needs to be quick. i heard that freeNX is quicker, but i doubt there will be a web-based viewer around. i tried both gnome and xfce4 on my virtual machine and vnc to it, strangely i found out gnome is somehow faster than xfce4 which is supposed to be otherwise.
View 4 Replies View RelatedI have two computers on my home lan I am trying to share files between...My desktop which is running Ubuntu Server 10.10 (x64) with a GUI, and my laptop which is running Ubuntu Desktop 10.04. I have tried a million different tutorials regarding SAMBA setup, but they never work.
In addition, most of those tutorials are geared towards hybrid Linux/Windows environment. I do not have any microsoft product in my home. I have created the share on my server, but I'm not sure how to connect to it from the laptop (once again at this point in the tutorials it explains how to access it from a Windows PC). I tried using the menu doing this:
Places-->Connect To Server-->Service Type-->Windows Share (for the server I tried my server hostname and IP) to no avail. Does anyone know of a recent step by step tutorial for setting up a complete Ubuntu environment? Is there a simpler method I can use since I do not particularly need to use SMB protocol?
All I want to do is share my music folder from my server so I can access it (from the same LAN) on my laptop...Arrrghhh frustrating.
I was trying to setup a cross-platform development environment with qt, an thus looked for the qt-sdk package I used to install on my 32-bit machine.This package appears to have been deleted from 64-bit ubuntu maverick, but I do not understand the details...
- Has this package been renamed, or is there another one in place of it?
- Is this package going to be available again in the future?
PS: I am aware that one can install the sdk by downloading the installer, but for unattended install I prefer the apt package...
I install ubuntu server 11.04 I select ubuntu server from boot menu then enter username and password and then i see a command line line and a black background How i can setup a graphical app (some thing like genome) for my server I do not know any thing Any body can explain all step of this for me how I connect to internet how download graphical app and install it? (I connect to web with windows 7 and adsl internet)
View 6 Replies View RelatedI edited /etc/profile to look like:
# /etc/profile: system-wide .profile file for the Bourne shell (sh(1))
# and Bourne compatible shells (bash(1), ksh(1), ash(1), ...).
if [ "`id -u`" -eq 0 ]; then
[code]....
When i type env, it just shows: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin It also shows JAVA_HOME, CLASSPATH and others were set up. Trying to get updatetool in glassfish usable for any user and during any session. I did the export command in a shell, and it worked, but not after closing the session. how to do environment variables.
I planned to setup raid 1 mirroring for my small home environment. Then I selected two new harddisk and connected to my system. I inserted my fedora dvd and I clicked raid button in the graphical installation process by refering redhat docs. I installed successfully in /dev/sda /dev/sdb it works fine. For testing purpose I removed one harddisk /dev/sda. My system didnt boot it shows grub error. Why this happened? Since I have configured raid mirroring why the system is not booting from second harddisk /dev/sdb.
View 1 Replies View RelatedI am attempting to set up a firewall in my home network environment. the rest of the environment is windows, sorry I am attempting now so bear with me. what I have is a cable modem coming in, then my fedora 11 box with 2 nics, then the wireless router and the rest of the network.
everything works fine until I put the linux box in. If I put the firwall in the firewall sees the internet but the wireless router directly after does not. I am doing something wrong with the dhcp I am guessing. I dont want the firewall to give the address to the network I want the router to. I tried to get the firewall to do it (yum install dhcp leafnode) but it kept saying something didn't work right.
so I figure I will let the cable modem give the firewall an ip and the router give the rest of the network their ip's but how do I get the firewall and router to see each other and allow passthrough?
OS: Centos 5.5_x86
I've searched quite a bit for how to set up Java environment variables with the newest java JDK. I installed java using the following commands:
yum groupinstall "java development" (I need it for the application I am trying to run)
yum install "java"
I have them both installed however I can't seem to get java to function. The application I am trying to run requires that I set java environment variables any solutions?
I have a server set up with Ubuntu Karmic. I am making it a printer server, and my printer is compatible with Ubuntu. (I tested it on my laptop, also using ubuntu) My problem is, the driver installer is graphical and my server is not. Is there a way I can just run the installer in server WITHOUT installing gdm or a desktop environment? So far, everyone I've read says to have xserver,xorg,fluxbox(or other gui), etc. I just want to run the installer through SSH, and I know about the -X tag.
View 5 Replies View Relatedi have added a tomcat startup service using chkconfig. I have set up JAVA_HOME and JRE_HOME as well ass alternatives to point to the correct location.I have an init script in /etc/init.d. When i start the tomcat service using [ /etc/init.d/<x> start ] everything works fine and the environment variables for JAVA_HOME and JRE_HOME are used correctly.Now i added the service <x> using chkconfig --add so that it can start on boot up. But now the service does not use the system environment variable for JAVA and JRE setup by me.Also after complete bootup if i try to start the service using [ service <x> start] the environment variable in the shell are not used. don't want to exclusively declare variables for JAVA_HOME and JRE_HOME in the init script.
View 2 Replies View RelatedMy problem is that I can't setup a diskless environment with CentOS 5.4 (server) and CentOS 3.9 (hosts). On the host, I've recompiled the CentOS 3.9 kernel, with these mods:
- added kernel level IP autoconfiguration;
- added NFS file system support;
- added Root file system on NFS;
- added e1000 driver (the host has a gigabit network card);
Then, I have followed the guide at this link: [URL]
But in my dhcpd.conf I'he put other parameters:
ddns-update-style interim;
allow bootp;
allow booting;
subnet 192.168.195.0 netmask 255.255.255.0 {
range192.168.195.70 192.168.195.90;
option routers192.168.195.254;
option subnet-mask255.255.255.0;
option domain-name"lnf.infn.it";
option domain-name-servers192.168.195.254;
option time-offset-18000; # Eastern Standard Time
default-lease-time21600;
max-lease-time43200;
filename"linux-install/pxelinux.0";
next-server192.168.195.254;
}
host dante79 {
option host-name"dante79";
hardware ethernet00:20:38:01:C3:7C;
fixed-address192.168.195.79;
}
After a discussion we had at my LUG tonight, I wanted to find out where Ubuntu stored that choice so as to make it my default choice.I looked in /etc/gdm, /etc/X11, and in various hidden files and directories in my home directory but could not find a likely suspect for further interrogation.
View 4 Replies View RelatedI have a pencil case I carry with a USB hub and 9 USB sticks in it. I like their unique icons and their root windows to pop up upon insertion. If this is answered elsewhere, I looked several times in several ways on google and these forums.
I tried this:
The autorun.inf file on the USB root written this way:
[Autorun]
Action=Start Blue512MB
Icon=BlueFlashIconBlueFlashIcon.ico
Label=Blue512MB
Then put the BlueFlashIcon.ico icon image in a folder titled BlueFlashIcon In Ubuntu (Mav) I get the new personal icon image for that USB stick appearing on the desktop but the USB root window won't pop open automatically when the stick is inserted. I have to dig to the desktop, find it and click it or go into Places on the menu. If when I put nothing special on the flash, no autorun.inf, no icon image, then the window for the USB pops open upon insertion, which I like, but only get the generic icon that looks the same as all 9 external drives. The labels are unique but icons offer faster recognition over reading labels, when they are needed, much nicer to use~
Ideas? Do I have to use .svg icons or another kind of text file? How do I set up a unique icon for each USB drive AND have the window pop up upon insertion?
xdm which refuses to load a window manager. I run Debian squeeze. xdm tries to execute /etc/X11/xdm/Xsession, which is actually an empty file, and fails with the error 'too many open files'. Afterwards xdm terminates the session and executes Xreset. Here the entries from the log:
Sat May 22 11:27:19 2010 xdm info (pid 2246): sourcing /etc/X11/xdm/Xsetup
Sat May 22 11:27:23 2010 xdm info (pid 2246): sourcing /etc/X11/xdm/Xstartup
Sat May 22 11:27:23 2010 xdm info (pid 2275): executing session /etc/X11/xdm/Xsession
[code]....
I was unable to find anything valuable concerning this problem. This is kind of annoying because I always have to switch to a console, stop X and startx X manually using startx. Then everything works out just fine. Unfortunately I am not yet that familiar with the setup process of X.
I've been learning linux for a while now with half an eye on making a career out of it in future. One sizeable gap in my knowledge at the moment is networking. Is it feasible/desirable to set up a network of virtual machines to use as an environment to learn networking? My budget is non-existent so I was hoping to be able to get a basic understanding of the principles from installing a few desktops, a virtual gateway etc on VMware workstation on my laptop, and doing a lot of reading online.
Is this feasible, or will I just end up learning about virtual networks instead of real ones? Also how much power would be required, because my 3GB RAM lappy has just gone bang and all I have now is a (new) 1GB RAM lappy.
I am wondering if it is possible to have programs remember which monitor they were last placed on when re-opening them?
View 1 Replies View RelatedI'm running Fedora 11 (same problem on my 32 and 64bit systems), I have Logitech bluetooth mice and keyboards hooked up to both of my systems. Occasionally, one of my keyboards stops responding and I simply open up the Bluetooth Preferences window, delete the keyboard and then set it up again. However, now when I click the Setup New Device button, nothing happens! This is happening on two seperate systems. Am I to believe this is the result of a bad update? I've checked my yum log and it hasen't updated any bluetooth packages for a few weeks now and this just started the other day. Any ideas what could be wrong?
View 1 Replies View RelatedI am trying to get an X window server setup on my CentOS 5.3 server rack. I have gotten as far as to doing:
yum groupinstall "X Window Sever" "GNOME Desktop Environment"
EDIT-Forgot to mention that I did Xorg -configure before testing the config. Only errors I got were:
(EE) LoadModule: Module ati_r500 does not have a ati_r500ModuleData data object.
(EE) Failed to load module "ati_r500" (invalid module, 0)
[Code]...
Linuxquestions--I posted this over on the CentOS forums, which are not as booming. Then I remembered these forums for when I had my VPS way back when and you guys were pretty helpful, of course expected me to mostly do my own reading which I dont mind its just having a hard time understanding some of the things in what I was reading. I even believe I came here with this problem before but abandoned the issue because my VPS was not powerful enough or something of the sort, but this was many years ago also on CentOS using apt. Now using yum which I like much better.
I had a friend load Ubuntu on my PC. Everything work pretty well except i cant use the effects like rain, fire, wobbly window or drag my window into another one of my desktop. My comp has Radeon HD3100 Graphics card in it. Is there any graphics drivers I can dl to make the stuff work.
View 3 Replies View RelatedHow do I move the Window control buttons when the window is in full screen mode? I.e.: I know how to go into gconf-editor:
Code:
gconf-editor --> apps --> metacity --> general --> button layout = ":minimize,maximize,close"
(I've intentionally disabled the menu...)
What I want is my window controls to be on the right side of the window when the window is in full screen mode.
Also I've had an issue with the Unity dockbar glitching out. I can still click on the buttons (i.e. the logout button) but it displays like a nintendo game inserted crooked. Is there a way to 'restart' unity without log out/ log in?
Any one else experienced any glitches with unity auto hiding/showing?