Fedora :: The Service Does Not Use The System Environment Variable For JAVA And JRE Setup?
May 6, 2010
i have added a tomcat startup service using chkconfig. I have set up JAVA_HOME and JRE_HOME as well ass alternatives to point to the correct location.I have an init script in /etc/init.d. When i start the tomcat service using [ /etc/init.d/<x> start ] everything works fine and the environment variables for JAVA_HOME and JRE_HOME are used correctly.Now i added the service <x> using chkconfig --add so that it can start on boot up. But now the service does not use the system environment variable for JAVA and JRE setup by me.Also after complete bootup if i try to start the service using [ service <x> start] the environment variable in the shell are not used. don't want to exclusively declare variables for JAVA_HOME and JRE_HOME in the init script.
View 2 Replies
ADVERTISEMENT
Jul 28, 2010
I am a newbie to Linux. I tried setting environment variable using export JAVA_HOME=/usr/java/jdk1.6 but that was not permanent (i.e is was there for that terminal session). I want to know how can i set environment variable permanently in Fedora 13 just like we do in windows.After google search, some user suggested to edit bashrc and profile file for setting environment variables but above file contains some shell programs.
View 3 Replies
View Related
Jun 4, 2010
OS: Centos 5.5_x86
I've searched quite a bit for how to set up Java environment variables with the newest java JDK. I installed java using the following commands:
yum groupinstall "java development" (I need it for the application I am trying to run)
yum install "java"
I have them both installed however I can't seem to get java to function. The application I am trying to run requires that I set java environment variables any solutions?
View 1 Replies
View Related
Apr 16, 2011
I am supposed to create an environment variable with the PRINTER variable, which should resolve to the word sales. Would the command be like this?: env PRINTER - NAME=SALES (is this the command to create that variable with resolving the word sales to it?)
View 3 Replies
View Related
Jul 18, 2011
i am looking for ideas to set up a calender/ scheduling system (or online service) for a doctor's office to set up patient appointments. i would like to set it up so that only the doctor, technician and receptionist can access it and set up appointments from 3 different computers.
View 2 Replies
View Related
Sep 22, 2010
I want to change my Java from OpenJDK into IBM JDK.
my IBM JDK is installed in /opt/ibm/java-i386-60
my default JDK is OPEN JDK (i don't know where it's installed)
my question is, how i can change my default Java form OPEN JDK into IBM JDK
View 1 Replies
View Related
Oct 28, 2010
I have a java program where I want to run it every 30 seconds. So what is the best way to run in that form? Is it running as a service or a cron is best? How to do with it
View 2 Replies
View Related
Jul 7, 2010
I have a java program which I need to run as a service or daemon. What is the most stable method to do it? It will be heavy processing socket programming which will be continously receiving data?
View 4 Replies
View Related
Sep 7, 2011
I installed new jre in linux. but i when i checked env variable $JAVA, it is showing old version. how to set the default java env variable to new installed location
View 1 Replies
View Related
May 21, 2010
installing the software BluePad, which allows a user to control their desktop environment with a Java-enabled mobile phone. I am still adjusting to Fedora (and some other Linux distros) from Windows and I am unfamiliar with installing and executing software programs. Also, if you could also include any pre-requirements involved in the installation..
View 3 Replies
View Related
Oct 15, 2010
I am trying to install the Matlab 7.5 compiled runtime for 64-bit Linux (MCRInstaller.75.glnxa64.bin) and keep getting a "No Java Runtime Environment(JRE) was found on this system." error message.
I understand the JRE is bundled with MCRInstaller and will self-compile/install. However, I don't have admin access, could this be the source of the problem? If so, how could I fix it (not sure how to direct it to install locally without going into the source code)?
I got around this error before, but stupid me didn't write down what I did and I forgot.
View 3 Replies
View Related
Apr 27, 2015
I'm trying to add 2 new environment variables (Debian . I have created a "/etc/profile.d/java.sh" file and in it I have added these lines (and just for the record, I've also tried adding those line to the profile file with the same results as explained below).
Code: Select allexport XAPPLRESDIR=/usr/local/MATLAB/MATLAB_Compiler_Runtime/v83/X11/app-defaults
export LD_LIBRARY_PATH=/usr/local/MATLAB/MATLAB_Compiler_Runtime/v83/runtime/glnxa64:/usr/local/MATLAB/MATLAB_Compiler_Runtime/v83/bin/glnxa64:/usr/local/MATLAB/MATLAB_Compiler_Runtime/v83/sys/os/glnxa64:/usr/local/MATLAB/MATLAB_Compiler_Runtime/v85/runtime/glnxa64:/usr/local/MATLAB/MATLAB_Compiler_Runtime/v85/bin/glnxa64:/usr/local/MATLAB/MATLAB_Compiler_Runtime/v85/sys/os/glnxa64
The first variable "XAPPLRESDIR" is added just fine (I check by doing echo $XAPPLRESDIR). The second variable is not added. Here's what I discovered though, if I change the variable name to LD_LIBRARY_PATK (I change the word "path" into something else) then it works just fine... So how am I supposed to add this variable? I need it to be named just that...
View 1 Replies
View Related
Jun 28, 2010
Well on a Rsps forum it says that the reason i keep crashing in the client is cause my Envieronment Variable isnt set for Java. i was wondering how to do this.please make it deatailed since i am new to ubuntu and i dont know most of the things like usr/java
View 9 Replies
View Related
Mar 8, 2011
how to set environment variable as i am getting following message during ./configure.
checking for GtkGLExt - version >= 1.0.0...
*** pkg-config cannot find gtkglext-1.0 >= 1.0.0
*** Set the environment variable PKG_CONFIG_PATH to point to the correct
[code]...
View 18 Replies
View Related
Apr 22, 2011
How are environment variable set in tcl? I tried "set $env(MYVAR) xxxx" but it didn't work.
View 1 Replies
View Related
Jul 25, 2010
I'm setting my CLASSPATH in /etc/profile.d/jre.sh. In a login shelleverything is fine. In an xterm window, the CLASSPATH consists of two of every intended entry.In jre.sh I am doing aCode:export CLASSPATH=$CLASSPATH:/many/paths/to/jarsSo I'm guessing this is getting run twice in the xterm case. Can someone explain what's going on here and what I should do to remedy this?
View 12 Replies
View Related
Feb 4, 2010
I'm trying to set the environment variable. java_home and path.
I used the following instruction:
export JAVA_HOME=/usr/lib/jvm/java-6-sun-1.6.0.14
and to check :
echo "java_home=$JAVA_HOME"
and every thing is ok.
But since i close the terminal every thing is deleted.
View 13 Replies
View Related
Jul 27, 2010
I've 7 PC's on my network. I've to setup an internal mail service, to send mails inside the network. I've installed Fedora 12 on one machine and the rest run's on Windows XP. What all packages do I need? How can I configure it?
View 2 Replies
View Related
Apr 17, 2011
I'm looking for the place where $HOME environment variable set. It is after login, to my mind.
I'm using Linux debian 2.6.32-5-686.
View 3 Replies
View Related
Jun 19, 2010
I'm trying to configure subclipse with JAVAHL for ganymede. I have everything installed and the right version of the JAVAHL.
I have seen that a lot of people uses java.library.path in the eclipse.ini file to set it up or just write a script for launching eclipse.
I have read about the .gnomerc file but i couldn't find it or create one and make it work. I'm using a 9.04 ubuntu.. is there anyway to configure an environment variable for gnome? What i want is just click on the shotcut and have it working, not having to run a script or all that stuff.
View 1 Replies
View Related
Oct 10, 2010
I just upgraded to 10.10, I use Tilda (terminal client) on my desktop but now when I type "clear" it says "TERM environment variable not set." instead of clearing the screen. Also commands like "tree" does not show folders and iles in color like they did before upgrading.
View 4 Replies
View Related
Oct 20, 2010
I have just installed Ubuntu onto my machine and my question is if it automatically comes with the PATH environment variable?If so, how do I add something such as python.exe to the PATH environment variable?
View 2 Replies
View Related
Dec 1, 2010
I am trying to create a launcher which runs virtual box from a custom config directory. For this I have to set an environment variable first then call VirtualBox command. From terminal it looks like:
Code:
helena@mint ~ $ export VBOX_USER_HOME=/mnt/shared/VirtualBox/
helena@mint ~ $ nohup VirtualBox > /dev/null 2> /dev/null &
If I have to create a shortcut for this, I am not sure how to define variable & call the command in a single command. There are some examples on:
[URL]
Code:
"DISPLAY=:0 xterm"
but when I try this, it wont work. My test.Desktop entry (I have started x on :1):
Code:
[Desktop Entry]
Encoding=UTF-8
Version=1.0
pCode]....
View 2 Replies
View Related
Nov 23, 2009
i have to set environment variables , after the installation of intel(R)MKL for linux OS given in intel mkl user guide, which are INCLUDE, LD_LIBRARY_PATH, MANPATH,LIBRARY_PATH, CPATH, FPATH, NLSPATH using the script file which, in my case,is "mklvarsem64t.sh"How can i set these environment variables?Do i need to set all these variables?
View 2 Replies
View Related
Apr 25, 2011
set the PATH environment variable?
View 4 Replies
View Related
Jul 17, 2011
In C, there's a global variable 'environ'. With the help of linux manual, I know it's defined in <unistd.h>. But the fowllowing program is also right without <unistd.h>:
Code:
#include <stdio.h>
extern char **environ;
[code]....
View 3 Replies
View Related
Jan 6, 2010
When I put a "test" target in my Makefile containing
Code:
@echo "CXX= $(CXX)"
it tells me "CXX= g++".
But I have nothing in the Makefile assigning any value to CXX, and as far as I can tell I have no CXX environment variable (no "CXX" appears when I run the shell command "env", and "echo $CXX" returns a blank line. So where's the g++ value coming from. Is this just built into Gnu Make, or is there a configuration file for make somewhere?
View 2 Replies
View Related
Mar 31, 2010
My actual mail is via pop3 from verizon. What I've done so far is just pull my pop3 mail onto my main machine at my house. But I'm finding I'd rather have a single imap server on my network so then all my machines could see the same mail.
I don't really want the imap server to poll verizon for mail, I just want the imap server to check pop3 mail at verizon only when one of my mail apps checks into it to look for mail.
View 1 Replies
View Related
May 19, 2015
I have been trying to change my PATH environment variable to no avail. I am using Jessie i386 with MATE. Using my .bashrc file works but not well because with subshells the modifications get repeated. I want the change to occur on login.
I tried modifying ~/.profile ~/.bash_profile /etc/profile and /etc/environment and one or two others but in no case did my change get picked up even after logging out and in again and even after rebooting. I searched the Internet and found each of the above places to make the change but they don't seem to work with Jessie.
Where do I make the necessary change?
View 7 Replies
View Related
May 14, 2011
I am trying to save the PATH environment variable from the Terminal running on a Ubuntu system.I typed in the following however it does not get saved.
export PATH=/home/david/Komodo-Edit-6/bin/:$PATH
View 1 Replies
View Related
