I have old laptop without CD (already it's dead), FDD was not from the beginning. This laptop have USB but can't load from USB. I install grub2 but it's work not correct. It boot system only 1 per 3 times. Don't show text correctly - sometimes I saw black squears & not letters (only in this f*g grub2; why developers don't made normal uninstaller?).
View 3 RepliesI want to load grub2 from grub4dos.I want to load directly the grub2 core. I know how to load first 512 bytes from some patition by chainloader and load grub2, but what I need is to load directly grub2 core without passing by bootstriping code (first 512 bytes).So, my first boot manager is grub4dos, then I can load grub2 and later I load Ubuntu. But I think I have to edit --set-root
What I dont know is how.
In hdd 0,7 (sda8) I have Ubuntu 10.10 and /boot/grub/core.img is in sda8 (hd0.7)
I tried this way:
Code:
title grub2
find --set-root /boot/grub/core.img
kernel /boot/grub/core.img
i initilally installed ubuntu 9.10 then installed windows 7 ,then i recovered grub2 using livecd as told in the post [URL] i did "sudo update-grub" and got windows 7 menu entry but when i select that entry windows 7 does not load but the grub2 is reloaded again.
i cant boot to windows 7.
Windows 7 have 100 mb partition "System Reserved" the grub2 points to that partition but still windows 7 not loaded.
sudo fdisk -l
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x3c3a81f5
[Code]....
Originally, computer had 20GB drive dual boot WinXP and LinuxMint using so-called grub legacy. I upgraded another WinXP machine by cloning its 120GB drive to a new 250GB drive. I put the 120GB in the Linux machine and gparted it to free 40GB. I tried loading Ubuntu 10.04 Studio in 10GB partition. Something went wrong during software unpacking phase and was left with commandline (c/l) 10.04. Kept 10cl in the partition. Tried again in new 10GBpartition to load Ubuntu 9 Studio - success. Grub2 is now new bootloader. Boot options = c/l 10.04, 9 Studio, XP from 120GB, LinuxMint, and XP from 20GB. The 120XP is unbootable (HardwareAbstractionLayer problem I expect). Tried to install 10.04 (regular not studio) over c/l 10.04 but managed to install in addition to i.e. did not overwrite. But otherwise 10gui install is ok. FYI: Grub2 is the initial boot loader however selecting LinuxMint on orig 20GB drive shows grub = legacy in LM (grub -v) term box, the Ubuntus on the 120 show grub 1.9x in term.
I wanted to delete 10cl from disk and grub. Originally intend to gparted->delete partition from U10gui then run grub update but could not because a partition (i.e.10gui) on the target disk was mounted. So I booted into LM and deleted 10cl partitions (ext and swap). That was a bad move! Could not boot machine - grub2 would not boot because 10cl partition was not found. It left me at the "grub rescue" prompt. I wound up reinstalling Linux to the empty partitions.
How do I delete the 10cl o/s from grub and the disk?
Later I will want to delete unbootable 120WinXP o/s from grub and the disk. However, with the WinXp, I will want to keep the data and just delete the o/s.
My Grub2 boot menu includes:
Ubuntu, Linux 2.6.31-19-generic
Ubuntu, Linux 2.6.31-19-generic (recovery mode)
Ubuntu, Linux 2.6.31-14-generic
Ubuntu, Linux 2.6.31-14-generic (recovery mode)
Q1) I only really need the latest kernel, 2.6.31-19, don't I?
Q2) So how can I get rid of the two 2.6.31-14 entries?
So I recently tried to install Ubuntu Lucid in the following configuration code...
The installation procedure went fine, and it said it had successfully installed GRUB2. But then, when I tried to boot up the fresh system, GRUB2 didn't even load!!
It's not giving me any GRUB errors, or giving me a 'grub recovery>' prompt, so I suspect that it really isn't even booting into GRUB.
I tried booting into the LiveCD, and installing grub to BOTH /dev/sda and /dev/sdb, but it still does not work, and I am at a loss.
Has anybody else had this problem?
i have just finish compiling a new kernel from source and would like to know how to load it in to grub2 i know grub the older version was easy to setup with the new kernels but i am not really in to grub2 to know how to load a new kernel to it.
View 1 Replies View Relatedi installed ubuntu / under /dev/sda1, then installed Win7 under /dev/sda2, as primary. Extended partition and its logicals are for data.
After Win7 installation, i can restore the grub2 for ubuntu, with grub-install and update-grub2. It can even probe the NTFS partition under /dev/sda2. But at restart, when i tried to go to Win7 selection, it does nothing, screen goes black, blank, with a single cursor blinking.
Some data:
Ubuntu Natty 11.04
From /etc/grub/grub.cfg:
Code:
menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(/dev/sda,msdos2)'
[Code].....
i just installed ubuntu yesterday (dual boot) and ive finally decided i wanted to wipe windows xp off my hard drive first of all i know how to delete partitions and such but then i went to g parted and saw all this crazy info (screenshot posted) im really confused and down wanna end up ruining my installation.
But what i want to do is remove my xp installation merge the empty partition with my linux partition and then rebuild the grub2 config file.
On Grub legacy i used a menu entry to boot from a DVD since the bios on my pc doesn't recognize my DVD burner.... So before on the old grub i can just added this menu entry and it all worked...title DVDroot(hd0,0)kernel /boot/grub/memdisk.bininitrdboot/grub/sbootmgr.dskthen grub 2 came along and that all changed..on the 40_custom file i added this
menuentry "Boot DVD Drive" {
set root=(hd0,0)
linux /boot/grub/memdisk.bin
[code]....
I am a long time ubuntu user (4.10) and have had a fair bit of experience installing ubuntu and the many mishaps along the way.
So after having no internet for a year I decide to try the new 10.04 flavour by ordering the cd from the site.
Installation went well, no hiccups. But when I restarted the comp it went straight to Xp, so I thought I'll just use the SGD to boot the partion anyway and fix this small problem later.
After SGD confused sda with sdb, I figured out that GRUB2 is now the standard boot loader.
So thats where I am lost, I have searched the forums quickly (25 pages or so..) and realise that I am not going to fix this easily or by trial and error.
here's some info
Ubuntu 10.04 LTS
WinXP SP3
Intel P4 3.0
1.5 GB RAM
[Code]....
I have a number of legacy pcs upon which I would like to install Lubuntu. None have CDROM drives, but they do have floppy drives. None can natively boot from USB devices. My goal is to boot into Grub2 from a floppy with USB support, but I'm having trouble making the floppy. I've seen recommended a few times a command string something like
Code:
grub-mkrescue --overlay=/boot/grub --image-type=floppy GRUB2.img
dd if=GRUB2.img of=/dev/fd0
But when I go to do this, grub-mkrescue has no --overlay nor --image-type option. My man grub-mkrescue page only lists --modules and --output as options. I have managed to make a floppy using the commands
Code:
grub-mkrescue --output=FILE
dd if=FILE of=/dev/fd0
This disk does boot into Grub2. The problem with this is that I need to add other files to the disk to have USB functionality in Grub2, but this process writes to the floppy in iso9660 format, which mounts as read-only. I have tried to go this route using the mount -o remount option to try to make the fs rewritable, but I also haven't been successful with that (and I think my limited knowledge is restricting me here).
Maybe I can add the correct files to the file output by grub-mkrescue --output before I write it to the floppy, but I also don't know how to do that.
Basically, I'm a little burned out and looking for some direction. Am I going about this wrong? When I try and follow other people's guides, they seem to have options available to them that I don't have. I'm doing all this from my Lubuntu 10.04 live CD, but have found similar things on my regular Ubuntu 10.04 install as well.
I' ve tried to do a iso multiboot 1gb pen stick with grub2 bootloader. I 've already readed all is it possible finding on the WWW but there are some problems i don't understand how to solve.
This is my sitution:
-koala 32bit installed on my pc with grub2 bootloader
-1gb pendrive parted as follow:
In the first fat16 partition there is installed grub2. On the second ext2 one there are iso files.
This is what i've do to install grub2 on my pen:
So i've created /boot/grub/grub.cfg file with the follow lines:
When i reboot by the pen stick, grub load up to it says me:
It seems not reding /boot/grub/grub.cfg
I've been using Ubuntu since 7.10 Gutsy Gibbon. I only recently fully switched to Linux OS's, and Ubuntu is now my primary. I currently have 9.10 installed. CURRENTLY I also have Backtrack 4, and Fedora 12 (Ugh!).Previously, I thought something was wrong with my my filesystem in Ubuntu 9.10, and after an upgrade of the linux kernel, I started to get Error: You need to load the Kernel First. That's where my problems started. I had upgraded to 9.10 from 9.04 and I still had Grub Legacy, so I went through hoops to try and get it to work, but eventually everything just kind of broke, and I completely wiped off my partitions on it and started fresh installs of all 3.
And now that the new linux kernel is released, 2.6.31-20 generic (I think... That's what the highest number on a file I can find in /boot is)I went through a few more hoops and ladders and tried to get it to work, but to no avail. I've looked the internet for a solution to this and tried just about everything but there is no unified answer, and I've seen on Launchpad there are alot of bugs that are classified as 'Fixed', but the problem still remains.I took out the 'quiet splash' part in the GRUB2 line for the newest kernel and it didn't do anything. It only changed it to "Error: Couldn't find file".This is the top two kernels (Main and Recovery for the new, and Main and Recovery for the previous working one)
Quote:
### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-20-generic" {
recordfail=1
[code].....
So I have an MBR that is Grub legacy,(from HardyHeron) and I cannot edit/upgrade this MBR. (I won't get into the reasons, other than I will mention SafeBoot).
I have a new encrypted LucidLynx Linux installation on partition 4 and an unencrypted /boot partition on partition #3.
When I boot up, I get the "Error 15" Grub error, which is expected as Grub legacy is looking for /boot/grub/stage2 or something like that and /boot/grub/stage2 does not exist in my GRUB2 installation in /boot/grub.
I thought if I could make a link from the GRUB2 binary of interest to /boot/grub/stage2, then maybe the GRUB legacy would be tricked into loading the GRUB2 binary.
what is the binary of interest in the GRUB2 installation that is the main binary?
Very strange Grub2 issue on my Dell Mini 10.
Had Crunchbang Statler on it, and after an update, it would hang at grub, before the grub prompt. ("loading Grub, Welcome to Grub" then blinking cursor, but no prompt or ability to get into rescue)
So I booted into a liveCD, chrooted in, and reinstalled Grub2, purging everything. No dice. Same problem.
So I figured the device maps weren't right, so I pulled off any important files via the live stick, and reinstalled #!. Same problem.
Did a bit of googling, and it seemed like it was most probably not a true Grub2 error, but a bios problem, so I reinstalled XP, flashed to a new bios (A11).
Then reinstalled, this time with Zenwalk (figured it might be a debian thing). Same thing. (note I replaced lilo with Grub2 for puroposes of testing)
I've got a Lucid system (normal Ubuntu, not any of the derivative distros) which has been throwing up the following error message this morning when trying to boot:
Code:
error: couldn't read file.
error: you need to load the kernel first.
[code]....
I'm attempting to triple boot Windows 7, Mac OS X, and Ubuntu 11.04 on non-Mac hardware. Chameleon is my primary bootloader, which is supposed to chainboot into grub2, but all I get when I choose the Linux boot option is a black screen with blinking cursor. If I try to boot Ubuntu while holding shift, I get the word GRUB, followed by a space and a blinking cursor. grub2 is installed to the Ubuntu partition, and attempts to reinstall it there or to the MBR from a LiveCD result in errors. The MBR and GPT partition tables are synchronized. How do I go about making Ubuntu bootable, without breaking my other two operating systems (or at least leaving them recoverable)?
I built a new desktop computer.The goal was to triple boot the system with Windows 7, Mac OS X Snow Leopard, and Ubuntu 11.04. This endeavor has been significantly more complicated than I originally expected, but with the of a forum-goer at InsanelyMac.com, I've managed to get pretty far with a complex installation process. I've attempted to get Ubuntu running using two methods, neither of them achieving what I'm hoping. Both methods follow.
In the first method, I install Mac OS X using a specially designed install CD that boots into the Snow Leopard installation DVD. The disk is partitioned to have a FAT partition, followed by a Mac OS X journaled partition, ending in a second FAT partition. Mac OS is then installed to the second partition. The Windows boot CD is then used to format the first FAT partition as NTFS, which Windows 7 is then installed to.
As I'm sure you know, this installs Windows Boot Manager. Then I boot into OS X using the boot CD mentioned earlier, and install Chameleon, a bootloader specifically designed for Hackintosh systems, and (supposedly) capable of booting into all three operating systems I'm trying to work with. Finally, I divide and reformat the remaining FAT partition into an ext4 partition and a swap partition, and install Ubuntu to that ext4 partition, with the bootloader installed to the same partition. This will break the Windows bootloader, as now the MBR and GPT tables are no longer syncronized. Ubuntu is also unbootable; attempting to chainload into grub2 leaves me at a black screen with a blinking cursor. The former problem is solved by booting into a LiveCD and installing and running gptsync. Windows is now bootable, but Ubuntu remains in 'limbo'.
The second method I attempted is very similar, but deviates in the last few steps. After installing Windows, I instead install Ubuntu 10.04 LTS, as I thought I might have fewer bootloader issues with that distribution (don't ask why; it was a lucky hunch).This breaks Windows Boot Manager, but this time grub2 throws me into the grub> prompt.I can boot into Ubuntu just fine using the set root/linux/initrd/boot commands, but my motherboard's Ethernet port is not detected by the OS, so I can't directly download and run gptsync. Once I do manage to run it, though, Windows is then also repaired.
Unfortunately, since I can't access the Internet, I can't do a distribution upgrade that way. Trying to upgrade from the recent release's LiveCD...well...doesn't upgrade, just overwrites. So I get the same black screen with blinking cursor problem. I've tried reinstalling grub2 through a LiveCD using grub-install both using the --root-directory flag and the chroot method.
System specifications:
Intel Core i7 (LGA1155)
Corsair VENGEANCE 4x4GB DDR3
[code]...
I'm running Ubuntu 9.10 and Windows XP on my system. After installing Ubuntu, it boots normally about once, and then the next time I try to boot, I have to wait a few minutes with it saying "GRUB Loading." I have read other threads about this that say that it is clearly a GRUB2 problem, and something about Windows overwriting something with the MBR; although I haven't booted into windows once in the process of installing Ubuntu (multiple times) or afterward. GRUB version 1.97~beta4.
View 10 Replies View RelatedI have two hard disks sda and sdb. I have Windows XP installed on sda2 and Ubuntu 10.04 on sdb5. When I installed Windows XP, Ubuntu stopped booting. I tried to repair grub2 from a Live CD unsuccessfully. Now I have completely messed up my MBR of both HDDs. I just want to configure grub2 to load both OSes in dual boot mode.
View 9 Replies View RelatedI am having problems booting a new Ubuntu 10 (server) install. My primary HD (/dev/sda) is laid out as follows:
Device Boot Start End Blocks Id System
/dev/sda1 * 1 18 144553+ 83 Linux <-- /BOOT
/dev/sda2 19 182401 1464991447+ 5 Extended
[code]....
I am trying to figure out how to load the generic kernel in Grub2.
I have run the /usr/hare/mkinitrd/mkinitrd_command_generator.sh and ran the output:
Code:
Why this will not load.
I went through so many post but I haven't found the proper answer yet hope you have an Idea1. Grub2 saves only Linux OS as last selected no Windows OS2.It is possible to boot into a cdrom (drive)?
View 2 Replies View RelatedI installed Fedora 15, which was my first real departure from Debian based Linux OSs. I absolutely love the new Gnome 3, and was able to configure F15 to work as I wanted it to. On rebooting I realized that there was no boot loader screen, that F15 just booted and didn't give me a choice as to which OS I wanted to use. Eventually I was able to configure grub to let me see the boot loader and added my old boot loader as a choice. This worked well, maybe not a perfect solution, but it worked. This weekend I installed LMDE (Linux Mint Debian Edition) to another HDD. LMDE uses grub2 and after the install F15 was not recognized.
Two questions: Is there a way for grub2 to see F15? or Can F15 be installed using grub2? I really don't mind re-installing from scratch.
Instead of moving to trash, how can i make the delete button delete? Delete is already enabled on the right click menu.
View 7 Replies View RelatedSO after using Testdisk to recover some images, the folders recup_dir.1 & 2 have saved in my FIle System area, when ever I try to press delete noting happens. I have also tried rm -f -rrm -f -fIt still dont delete, I have also deleted my user account and made a new one, but the files are still there.
View 4 Replies View RelatedI am trying to use an old box as backup server. I have tried a couple of possibilities along the lines of:
Quote:
rsync -a --delete --progress --log-file=/home/$USER/info.txt -e ssh /home /etc root@192.168.0.106:/mnt/back
The problem is it does not delete files that has been removed from my local system?
I run the command as root on the local system.
(I realize I should properly not ssh into the server as the server's root but I'm having trouble with the permissions and I want to make sure everything else works before messing around with it)
Why is there no Delete when I right click like there is with Windows in ubuntu? Pretty much everything else is there like new folder and so on Is there some way to add it? Also why when i delete something does it not ask me if I am sure that i want to delete that file?
View 6 Replies View RelatedI just can't stand knowing that there's a slight problem with my PC.I have roughly 12.5 Gigs of files, mostly movies that are multiple clones of a particular movie (which was an entirely different problem altogether) and I CANNOT DELETE THESE THINGS! There has to be a simple way to do it from terminal, problem is, I can't seem to find the trash directory in terminal.
View 3 Replies View RelatedWhen i open one of the web browsers i use and try to load a web site it's taking to long to respond and sometimes it doesnt load the website at all. I have tried with firefox,epiphany,opera with all the same results. I am sure that this is not a problem with my internet connection because i don't have these problems with windows.Also the network manager connection settings are correct
I also tried choosing the old kernel(2.6.32.24) to boot from but no success.The problem is the same as if i am using the 2.6.32.25 kernel. The strange thing is that i can download packages from synaptic with full speed. Last think.I have recently downloaded the recommended updates from the update manager but i don't remember what are the things that where updated.