Ubuntu :: Clear Up Some Harddrive Space?
Mar 4, 2010
i signed up for an online storage website because i want to clear up some harddrive space. the way they upload is java based and whenever i get to the upload page i get the message at the top of the screen that says "additional plugins are required to display all the media on this page." when i click on "install missing plugins" it tells me "no suitable plugins were found." obviously i need to manually install something, what should i install? i cant always understand the descriptions in synaptic.
View 2 Replies
ADVERTISEMENT
Nov 9, 2010
My system is giving me a low space on filesystem warning. When I run disk analyser, it seems that /var/lib/apt-xapian-index is using 97% of it!! That's 8.9GB. I found another post which explained that each time this package runs it builds a new index set, and how to make it only update new packages. I made that change, but this doesn't release the 8.9GB that I guess can just be cleared down somehow...
I hope it can be cleared down anyway. How to clear all this down? I do want the package to remain running on the system, I just want to clean it up and release all that space. I'm on Lucid, I also saw the warning on Jaunty but it went away after upgrade to Lucid... now it's happening again, I can't ignore and hope it goes away for ever!
View 3 Replies
View Related
Aug 3, 2010
i just got fedora 13 from the dvd 64 bit and when i looked at how much space it took up in computer in it said i only had 43 gigs left out of a 610 gig hard drive then i go to my home folder it says 504 gigs of free space but then i look at my system monitor it said i had 547 gigs is this a bug.
View 4 Replies
View Related
May 28, 2011
I tried using livecd 104 to allocate some free space to the harddrive that contains the files and the os 104
here is the gparted output:
http://pastebin.com/aZnH1m21
what should I do now? reboot? Is the data lost?
View 1 Replies
View Related
Aug 31, 2010
What can i do clear up some space?Is there any way of cleaning /tmp?
View 5 Replies
View Related
Jul 21, 2010
Closest analogy I can compare what I want to, is like the `sync` command, which writes out all stuff in the disk buffers, freeing the buffers.Instead of disk buffers, I want to 'clean out' my RAM and SWAP of any/all junk that's accumulated in there over the time my PC has been up. I've long wondered about this, but never asked, though I recall searching around several times..When I first boot it cold and log in, the memory usage bar on my desktop is near zero, and the swap is empty. But after a week or 2 or 3 or more of uptime, and with Firefox always running with a dozen tabs or so at any given time, I end up with all the memory full or 'filled with cached stuff', and the swap space is filled to capacity.Curiousity: I blame Firefox for leaking memory, but even if that's still the case today (historically it was) can this all be blamed on Firefox? Or what-all causes this, besides Firefox- just..Everything?
Here's current stats:
Code:
sasha@reactor: uptime
21:21:42 up 30 days, 10:07, 3 users, load average: 0.02, 0.05, 0.01
sasha@reactor: free
total used free shared buffers cached
[code]...
So, 3.8 of 4 Gib of RAM is occupied, and the 1 Gib swap space is jammed full 100%. This must slow things down to some degree, yes? I mean, the kernel does have to keep track of this, right?Of course closing all the applications doesn't make a difference (not an appreciable one anyhow) and the only way I have found to start fresh is to reboot.
View 14 Replies
View Related
Jul 9, 2011
Just installed and started to use the suse11.4 two weeks ago when my Win7 broke down. Now I got a new Win7 recovery disc from my laptop manufacturer, and want to install a Win7 accompanying with the suse11.4.
My question is how to clear up a free space in HD to install win7? Currently, I have 3 partitions that are sda1, sda2 and sda3 with space 2G(swap), 20G(root) and 270G(home) respectively. I want to free up half space from sda3 to install Win7, how to do it without delete the data on it? One weird thing is that my HD totally is 320G, but when I installed SUSE, only 300G was usable and the other 20G is missing until now. The fdisk -l command info. is showed below:
View 3 Replies
View Related
Mar 9, 2011
i've worked with Linux for a while now, but never in a double boot kind of way (except using wubi), and i'm still kind of a newby.i have 2 harddrivesfirst one has only 1 partition; Windows XPsecond one has 1 empty partition, simple storageand another partition where i installed fedora core, and GRUB is also located on this harddrive.I changed harddrive priority to my second harddrive, result:GRUB comes up, no problem, but when I try to boot windows, it tells mentldr is missing ctrl alt del to continueso i changed the harddisk priority back to the way it was, where the first drive containing windows is first priority... but then, no GRUB.i've tried editing the grub conf,i've tried fixboot/fixmbrtl;dr:no ntdlr when linux harddrive is main priorityno grub when windows harddrive is main priority
View 4 Replies
View Related
Jan 4, 2010
Logical Memory Space of 4GB is divided in to 3GB User Space and 1GB Kernel Space. Always. Correct?
1. How can we change it? (just changing value of PAGE_OFFSET is okay?)
2. If system have only 256MB of memory (embedded system) and suppose Kernel Modules eat away all the memory during boot. User space will be left will no memory. Is this case possible?
View 2 Replies
View Related
Mar 6, 2010
I have linux and windowsxp on one machine. I have only 3gigs free on the windowxp machine and 20gigs free on the linux machine. I want to transfer space from the linux box to the windows machine.Is this possible and what steps would I need to follow to do this?
View 1 Replies
View Related
May 25, 2010
i used gddrescure to clone an 80gb harddrive and this is the result ROFL.i guess you can only do this making sure the target drive is the same size, you see i didnt know lol so..i now have THIS problem.can anyone tell me how to turn my unallocated space into a usable 'free' space? i could play with gparted right now but i dont wanna do anything wrong, so if theres anyone who can tell me how to do this.
View 1 Replies
View Related
Jul 22, 2010
i made space by shrinking my window partition and so i have unallocated and would like to add to sda2 to have more space. Check out this pic. How can i do this?
View 1 Replies
View Related
Apr 23, 2011
I installed Ubuntu 10.10 with wubi and i have been enjoying my Ubuntu experience a lot. I installed quite a bit of programs and spent a couple hours customizing my machine. The problem is im running out of disc space. Any ideas on how i can add more space. I have gparted but i dont know where to move the free space to because wubi installed it.
View 1 Replies
View Related
Mar 20, 2010
my home partition is an extended one, and when i want to create an unallocated space the space will stay in that extended partition. but there is also an 7 gb unallocated space which i want to merge with the other unallocated space. I also cannot extend that partition over that 7 gb. how can i overcome that problem?
i m also uploading a screenshot of gparted.[URL]..
View 4 Replies
View Related
Dec 13, 2010
I am developing a I2C CDROM client driver. The CDROM firmware supports TOC information read through a I2C command. It sends the TOC information in burst ( Interrupts a GPIO pin when it is ready ) and my CPU does a I2C read to read the TOC. When the CDROM firmware finishes sending the last data burst , it informs my CPU that it is done with the TOC, by a flag in the last data burst. I would like to know, which is the most efficinet way I can send these TOC information to userspace?
View 4 Replies
View Related
Sep 22, 2009
I am writing device driver in which i have to call callback function from kernel space, which are saving my data. But the callback functions are in userspace. While accessing them i am getting segmentation fault.
View 1 Replies
View Related
Jul 7, 2009
I wanna write a file in kernel space but from my searching I can to know that instead of writeing file in kernel space ,I can write data to user space by copy_to_user space.
But link is missing ...I dont know how will my user space will access kernel space means my function in kernel space which will do copy_to_user /....How my user space function will call my kernel level function ..
Can any one of you provide me with some example file which are doing this .I know every char driver is using it ...but i could not trace back how user level function is accessing it ...i m confused between user space and kernel space.
View 2 Replies
View Related
Jan 31, 2010
Today I was installing a lot of software since I'm just setting up my Slackware system again after a fresh install, and I realized that my root partition has very little space left.
Here is the output of df -h:
Code:
As you can see, I have a 20G (19G here for some reason) root partition, 8G /var, and 86G of /home. I thought this would be plenty since many recent recommendations for / are 10-15G. Now, though, 17G are used up for some reason! How is this possible? I thought a full slackware install only had about 4G of software! I don't have any music or movies or any crazy huge files that I know of, and those would be in my /home directory anyway. Is there any way I can see which files are taking up all this space?
If it's necessary to allocate more space to my / partition, is it still possible to boot up a GParted live Cd, shrink /home a bit, move some partitions to the right, and expand my root partition? I would REALLY prefer I don't have to reinstall since I just spent a ton of time setting up my system again, but if worst comes to worst ... :'-(
In case you're curious, here's my /etc/fstab:
Code:
View 14 Replies
View Related
Jul 14, 2009
How to use execv from kernel space to call a user space program writtenfor socket prog.
I tried to write code for socket in kernel but its not working.
Socket code in kernel is also needed.
View 2 Replies
View Related
May 2, 2010
I think I have a corrupted file system on my 1TB harddrive as both Windows Vista and Ubuntu are not seeing it. How do I recover the drive. I have never experienced this sort of thing before.
View 9 Replies
View Related
Jul 15, 2010
I am running windows 7. I want to install Ubuntu 10.04 on a second harddrive. I am new at this and would like to know the correct way to do it.
View 3 Replies
View Related
Jul 5, 2011
I am running Ubuntu 10.04 and recently installed Linux Mint on an other partition. I am now finding that when I boot up I get a message that Grub is unable to find a hard-dirve that does not exist.
how to tell Grub (or is it something/where else) not to look for a non-existent hard drive?
View 1 Replies
View Related
Feb 5, 2011
I have two harddrives installed on my HTPC. I am using the smaller (120gb) to run the OS (kubuntu 10) the larger (1 tb) I want to use to store all of my media.
However....
The second hard drive has THREE linux Distros on it (from me testing and playing and making decisions) and I CANT figure out how to get them off.....
The hard drives are SATA and plugged in in the correct order.
I have tried fdisking and reformating which seemed to work, but when I boot it still asks me which OS i want to boot to.
Right now I am trying to zero out the hard drive by using ths
dd if=/dev/zero of=/dev/sdb
I typed that in as root about 15 minutes ago and hit enter. it hasn't said anything since. no command prompt or anythng. I am hoping it is working, we will see.
View 8 Replies
View Related
Jun 7, 2010
I was trying to install Fedora 13, on to my laptop. I have 30 GB of unallocated space in extended partition. When trying to install Fedora 13, I got stuck, as the installer says that there is no free space for installation.can convert the unallocated space into free space.
View 1 Replies
View Related
Aug 25, 2009
OS: RHEL AS 5 64-bit
HDD:300 GB Hardware mirror (HP blade bl460c)
While installing OS, in partition window after OS file system structure I've left 277 GB. But after installation it shows Size - 255GB and available disk space is 242 GB.
Isn't it weired? How can I use the total amount of space in Linux? I need the whole 277GB exactly. What should be my workaround?
View 6 Replies
View Related
Oct 14, 2009
I have a list of files in a directory which starts with - or have space.
I need to copy them back without the space or -?
linux1[sim]% ls linux1[sim]% cp ./-* ./*
View 8 Replies
View Related
Dec 30, 2010
I have red hat linux server and it has mysql installed whenever i write on terminal command mysql -u root it shows error "ERROR 2002 (HY000): can't connect to local MYSQL server through '/var/lib/mysql/mysql.sock (111) "
And another problem is that it is showing 0 byte free space istaed of freeing the space. it may seems that both problems are dependent on each other.
View 6 Replies
View Related
Oct 17, 2010
I have a big partition ext3 and System Monitor show me that there are 14Gb of Free space but only 4Gb of Available space.
View 4 Replies
View Related
Jun 21, 2010
In a 32-bit system, max memory addressable is 4GB. Now Linux kernel does memory mapping division of 1GB for kernel address space and 3GB for user address space. That means 4GB of virtual address space is divided between kernel (1GB) and user (3GB).
Q1. All virtual mapping utilizes the available physical RAM without any division? I mean to say that if RAM is 512MB then a page in kernel space can lie any where RAM (leave aside old PCI dma accesses)? (How this fits to fact that kernel memory is non-pageble)
Q2. If a process is created in user space, it has visibility 4GB address space or 3GB address space?
View 2 Replies
View Related
Jul 5, 2011
My system is dual boot with win7 and ubuntu. I have free space of around 10 gb. I want to add this free space to my ubuntu drive. How can i do that?
View 4 Replies
View Related
