Ubuntu :: Change Permissions On Files So Can Copy Them Freely
Apr 30, 2011
My laptop has Ubuntu as a dual boot. Many times I want to copy files from one folder to another. But I run into permissions problems.
For example, I downloaded a program that required me to put a rules file in /etc/udev/rules.d But when I tried to do that, I got an error: "permission denied"
Is there any way to change permissions on folders so that I can freely copy them from one folder to another? That would make life a lot easier.
I have a NTFS drive mounted at /media/bigbrother as my user. I have no trouble reading or writing to files here. I just created a link to /var/www using: ln -s /var/www /media/bigbrother/
The link is there however, I can't even open the folder. How should I go about getting access. So that I'm able to copy files from other systems on the network.
I have two HDDs in computer, one with ntfs and windows on it and second with btrfs. I want to get data on that btrfs disk. I boot with bootable USB stick with ubuntu on it but I found out that I cannot copy anzthing. I dont have permissions. How to change that. I am logged in as nobody here in USB stick, and files are probably locked as mz previous username when I create them.
I have a comp with Snow Leopard/Windows/Ubuntu 10.4 on it. What I'm trying to do is set permissions to let me copy files from the Snow Leopard partition. I use to be able to. Now I get Permission denied. What do I need to do to set up permissions to the hfs+ journaled partition?
I've been using Ubuntu for a few years and I am having issues trying to load .jar files and .exe files in Wine. I keep getting an error message that says my computer doesn't have permission to load these files. I've done some research and found people saying to enable the file as executable in the files properties, to enable executable in the permissions folder, and to allow source code on the Ubuntu Software screen, but whenever I try to check these boxes, they immediately revert to having a line through them instead. I remember when I was running Ubuntu a few years ago I was able to completely disable this restriction in terminal, but I can't remember what I did.
After burning files to DVD+RW, the owner is changed to root, and all permissions are read only. I want to periodically open these files, update them, and save to the DVD again, but I no longer have permission and cannot change the permissions since I am no longer the owner. I tried sudo commands, but get responses "Read only file system". I have erased and reformatted the DVD and started over but get the same results. I have Ubuntu 9.04, and have tried Brasero and Nautilus and get the same problem. Am I using the wrong kind of DVD/CD?
I've just read that I can't change the file permissions of files and folders if they are sitting in what was my old Windows D: drive. Is this correct? If so what is the work-around?
I don't want to have to cut and paste that entire D: drive's contents over to a recognised Ubuntu folder. I had in my mind that this D drive would continue to be my data dumping ground, to which I need read/write access to.
I just installed Karmic, but I can't copy an old user's home folder (/home/oldusername/) because everything is owned by root.I read but I'm concerned about messing up the system or the files in that old user's folder.So, how do I adjust the permissions of the files in /home/oldusername so that I can use openssh to copy them over my home network to my other computer? I have the ssh part figured out, but the files will not copy to the laptop due to permissions.
So i pulled some files off my buddy's computer via my wireless home network, i can access them but in the permission tab the owner is "nobody" so i can move the files. How can i change the permissions to enable me to move the files?
I have a NFS shared directory between two linux machines, one with RedHat3 and one with CentOS 5.4.On the CentOS 5.4 machine I have InfoBright installed. In that directory, I want to create files with InfoBright and then to select from them with MySQL on the RedHat3 machine.The problem is that InfoBright creates files with 660 permissions and mysql with 666, and I cannot SELECT from any file due to the fact that is not "readable by all"(this is the actual error). I can change the permissions manually, but I need them to be created with 666 permissions, so that I can import them automatically on the other side with a script.Is there any way to change the permissions of the InfoBright created files?
Something has changed all my file permissions to read only and when I try and change them back it wont let me. Is there something I can do i Nautilus to correct it?
It even effects the waste basket-all the stuff in there is now read only and when I delete items I get a file operations window, which comes and then goes like its deleted them, but they re still in the waste basket, doesnt show an error message like it does if I try and move any other file.
I would like to change the permissions for a directory and all files inside the directory how do I do this? The website is located only on my local network so I am not worried about security. Also what would be the optimal permissions for running wordpress.
I'm new to Debian. I've read the documentation on this but it is too heavy for a new user to understand. I would like to change the default permissions for newly created files/directories.
I want all newly created files by 'user1' to have the default permissions of: 1. "owner can read and write" 2. "group can read and write" 3. "other can read only"
Permission 1 and 3 are already default. But I would like number 2 to be default as well. (the current default for group is read only).
I have a Qnap 219p NAS to which I have connected a USB external harddrive. I can access the external harddrive from my windows box using the network share, but at first i couldn't access the folders. The permissions set in the NAS GUI for the external drive is correct and are identical to the permissions set to the 2 internal drives.
I ssh'ed to the nas and used 'chmod -R 770 /share/external/sds1' - this granted me access to the folders, and some files. I can open all files in the root, but if I go just 2 folders 'deeper', i can't open the files in this folder, and in the folders after that.
In ssh, if i navigate to the folder wher I cannot open the files and use 'ls -l', i can see that the permissions (770) hasn't been applied to these files. How can I get chmod to apply the 770 permission to all files, folders, subfolders and files in subfolders etc., without having to chmod every folder one by one?
I work with this travel company that host sites for different agents. They have ALL the sites in one directory and each site has its own search.php file. How can I locate, and change all the search.php files permissions to 644 in one shot? Is this possible maybe with the find command? I read the man page for this but I am not sure how to write out the command.
Finally I managed to install my printer/scanner drivers.The last thing I need to do is to add the following two lines to 40-libsane.rules (which is a read only file):# Brother scanners ATTRS{idVendor}=="04f9", ENV{libsane_matched}="yes".How can I change permissions for this file or add these lines without changing permissions?
i want secondary users can able to change the files permissions of primary group?user MAC is having www as a primary and httpd as secondary group. But he want to change the file permissions (chmod) httpd group files. Is it possible or not? I think its not possible. If it`s possible then let me know how?
I'm new to Ubuntu Linux but have many years on windows platform. Please can someone help me with how to change the following items.
No.1 I would like to change the HORRIBLE!! YAK!! brown background color behind the word Ubuntu in the start up screen when the machine loads up (before the login). I have located the image file for this which I have found to be: /usr/share/images/xsplash/bg_2560x1600. jpg but the OS says that root is the owner and that I don't have permission to change this. So how can I change this for a color I do like.
No.2 I would also like to change the login dialogue screen style. I know this is possible but again I'm fumbling to see how I can do this. I have tried with the start up manager but every attempt fails, the settings don't take. Once again I suspect permissions are at the bottom of the problem?
No.3 Would like to have a colorful splash screen image on boot up, I've managed to remove the old one (small white 3 ring ubuntu logo on black background) but havent been able to install or replace with a new one. Its been incredibly frustrating, I'm feel sure I'm missing something simple here. Wondering if its permissions yet again?
Anyone who can offer help on any of the above, guidance or advise me would be much appreciated. Please bear in mind that I'm still very much feeling my way with Linux so keep it simple.
just installed ubuntu couple of days back on my netbook. I am still a beginner, enjoying my adventure exploring ubuntu. I have another desktop which runs on XP. I am able to access XP shared folders through my netbook(linux). However, i wanted to copy files from XP infact folders using TERMINAL in my netbook, not copy and paste using my mouse. Are there any commands for it?
If this information excists here so sorry I was not able to find it. How to change permissions in Unbuntu for those people who are trying to change persmissions in a subdirectory.
Open the terminal and then type: Quote: sudo chmod yourpermission number /thenameofyourdirectory
I have a 160GB harddrive which I installed a F12, would like to upgrade to a bigger drive, but I hate to have to re-install everything.
Recommend a good disk copy utility? The utility should be able to not only copy files, but boot sector and everything. So I just need to make a copy, change my BIOS to boot from the new drive and run everything as before.
I backed up my "/home" and "/usr" folders from a previous installation.How can I copy them on to my new installation without losing my permissions?I tried using nautilus, but everything had "Root-only" permissions after I pasted the files.
I have a system where the permissions of many files are messed up. I have another system that has the same files, if I put that hard drive in, without simply overwriting the files, is there a way where I can recursively set the permissions of each file to that of this other directory?
I have a question regarding Samba Permissions. As the subject described, is it possible to let users read the file but can not copy the file physically? It's fine if they open and copy paste the contents but no physical copy paste and also I need to log the activity of the users. If samba will not be able to comply my needs, could you suggest some programs to meet my requirements?
I am using Joomla and a script within it. That Script is suppose to copy tables from one DB to another.
Code: Error(1) [1142] query [CREATE OR REPLACE VIEW test_users AS SELECT * FROM `localiz_master`.`jos_users`]. DB Error: CREATE VIEW command denied to user 'localiz_master'@'localhost' for table 'test_users' SQL=CREATE OR REPLACE VIEW test_users AS SELECT * FROM `localiz_master`.`jos_users` Error [1142] retrying query [CREATE OR REPLACE VIEW test_users AS SELECT * FROM `localiz_master`.`jos_users`]. DB Error: CREATE VIEW command denied to user 'localiz_master'@'localhost' for table 'test_users' SQL=CREATE OR REPLACE VIEW test_users AS SELECT * FROM `localiz_master`.`jos_users` localiz_master: name of the DB from which data is suppose to be copied. jos_users: name of the table form the main DB. localiz_master: user for the DB. localhost: host test_users: name of the table to be created.
We do have phpmyadmin but the user's table is hidden. What SSH command we might run to make localiz_master user have access to all the databases.
the permissions for my home directory were accidentally changed from 'access files' to 'create and delete files', and I changed them back, but ever since then I am not able to change any preferences/settings at all. power management, themes, panels, emerald, anything. my user account is supposed to be the administrator, and all the user privliges are checked. how to get control of my computer back?
