Ubuntu :: Can't Change Permissions In Etc/pulse Folder?
Nov 26, 2010I'm trying to (hopefully) fix my audio glitch.I'm trying to edit my /etc/pulse/default.pa.I tried:
Code:
sudo chmod 775 /etc/pulse
and
[code]...
I'm trying to (hopefully) fix my audio glitch.I'm trying to edit my /etc/pulse/default.pa.I tried:
Code:
sudo chmod 775 /etc/pulse
and
[code]...
How do I change folder permissions without changing the permissions of the files within the folder?
View 6 Replies View RelatedIm new to these forums heres my story:Windows 7 on my acer extensa 5230e became corrupted so i installed linux Ubuntu 10.04 on a 320 gb external hdd. I have installed Mixxx and am trying to create my own skins for it. But whenever i try and paste the folder into the /usr/share/mixxx/skins folder it says that I dont have permission toam an administrator... or at least thats what it says i have trie chmod a+w it but it says operation denied: Code: chmod: changing permissions of `/usr/share/mixxx/skins'
View 3 Replies View RelatedI have a Debian Wheezy 7 installation. When I turn it on it boots to the log in screen normally. However when I type in my username/password and try to login the screen briefly turns off for about one second and returns to the log in screen. I cannot log in.
This started happening immediately after I changed the owner and permissions for the "/tmp" folder and all of its contained files/directories. This is the only change I made to the system before the problem began. Immediately after I made the change, I rebooted the system and that's when the problem began.
I am having a USB disk.I want to change the permissions of folder on it from 700 to 755 (and all subdirectories in it)ls -l showstotal 26Quote:
drwxrwxrwx 2 tkmsr tkmsr 2048 2010-02-12 04:12 HPLAUNCHER
drwx------ 7 tkmsr tkmsr 4096 1970-01-01 05:30 vol1
drwx------ 1 tkmsr tkmsr 20480 2011-01-03 17:43 vol2
[code]...
I have two drives in my computer: a 160GB and an 80GB. The 80 holds Ubuntu, the home folder, etc. The 160 is for other files. I need to change the read-write permissions on the 160, but I can't. If I do it through the GUI (right-click>permissions) it just changes back instantly. If I do it through the command line (even with sudo), it has no effect.
View 5 Replies View RelatedI've tried updating from 8 to 10 using updater and it failed. I'm currently running off a LIVE CD and want to back up my files to do a re-install. My problem is that some of my folders are showing as "unreadable", that I am "not the owner" and I cannot seem to change the permissions for them. I also cannot seem to copy them to back them up. Have I lost these folders? Is there any way to retrieve them?
View 5 Replies View RelatedThis is my 2nd time using my Ubuntu, I am using 9.10 because my laptop doesnt support 10.04 (need more RAM). So anyway I need to know a way to change it so I can edit files in there, I checked the properties and root has read only permissions how can I change this?
View 3 Replies View RelatedI'm in an organization where each user has a Windows network username, and a central windows server with a folder for each user. I can access the folder using SAMBA and my (windows) network user name. I want to change the permissions (sharing settings) for my folder on this windows server - using only Ubuntu.
Had i been using windows I would simply right-click on the folder, go to permissions settings and add/modify users in the list.First of all, is it even possible to do this using Ubuntu?
So I'm trying to put together a birthday present for my girlfriend. Here's the background. She just got back from a semester abroad in Rome. She's having a hard time getting used to living in the states again, so I want to make her a photo album with all of her pictures from Italy and the rest of Europe. Its a surprise, so I can't just get them from her. I've got her Time Machine, which has all the photos on it (I'm 'debugging' it for her, she's not so tech savvy). I've found the pictures folder, but I don't have the permissions to access it.
So the question is, I have her username and password, what do I have to do in order to read the file with all the pictures in it? I'm not a crazy stalker, in case you were wondering, I just don't know how to change my username to one that have permissions for the folder.
Recently I've tried installing Calibre from the Software Centre, but it seemed to be glitching as when I press Update Source, the 'In Progress' icon shows up, but when it finishes nothing changes - the Update Source button is still Should I report this?Anyways, I've installed Calibre from their website to .calibre in Home Folder. However, the folder is 'locked' as it requires root priveleges and I can't drop files there without being the admin. I'd like to reduce 'open as root' files to minimum, so I was wondering if there is a way to change the permissions of all the content in one operation, preferably using GUI, and not the terminal?
In addition I've noticed that other folders in my Home Folder like Pictures/Wallpapers require root privileges. This is really annoying as when I 'experiment' with Ubuntu I use Live CD to make sure I don't screw up the main system. When I do I can't open some files from hard disk because of those root inconsistencies
I have two users: test1 and test2 When i logged in as test1, I can not change the ownership of a file to test1:test2 it says: Operation not permitted
View 2 Replies View RelatedI just installed Karmic, but I can't copy an old user's home folder (/home/oldusername/) because everything is owned by root.I read but I'm concerned about messing up the system or the files in that old user's folder.So, how do I adjust the permissions of the files in /home/oldusername so that I can use openssh to copy them over my home network to my other computer? I have the ssh part figured out, but the files will not copy to the laptop due to permissions.
View 9 Replies View RelatedI had an old windoz 2003 server running a few recreational web sites. I've grown tired of all the hacking attempts, FTP floods, etc. Ok.. I've grown tired of windoz period.When I set the server up, I had the operating system on one physical drive and stored all of the web files on a separate physical drive just in case I ever wanted to make some changes to the operating system.in my adventurous ways, I've dumped windoz and installed ubuntu 11, 32 bit server edition on this machine. It is running fine from what I see on the server side. The first problem I've noticed is when even attempting to navigate to localhost through the server's web browser, I get a permissions issue.
So... off to the drive where the httpd.conf file points to. This is the second physical drive. When checking permissions and attempting to change them to the correct ones for the folder, I can't change them. I've tried through the GUI and the terminal as root. Neither way will change the permissions.I've stepped back and checked the permissions on the physical drive the files are stored on. I am having the same issues with the drive itself. How in the world can I change the permissions either on the drive or the folder? Is there something I should do as far as the drive's mounting?
I've migrated to Suse from Mandriva. I installed all my backup folders/files to my "home" folder but they have come up locked. I remember in Mandriva to change the permissions I pressed Alt F2 and then entered a command. How do I do it in Suse?
View 8 Replies View RelatedI own an Acer Aspire One which has Linpus Lite installed. Last night I attempted to delete a couple of files only to find they are read only and that I cannot change the permissions by right clicking and changing the drop down menu from read only.
These aren't protected files or anything, they are files I've downloaded or created myself (one using the onboard web cam to test it).
I attempted to play with Terminal for a bit but as a newbie I got easily lost, not like I can fall back on command prompt knowledge from Windows!
I think it's somehow connected with the user which accesses these docs or tries to change the permissions. I also tried with an su- which meant I was using Terminal as root, however, I wasn't sure how I could then set the permissions for a particular file/folder within the file system.
Every time I try to change file or folder permissions on a separate internal drive in ubuntu 10.10 desktop in sudo file manager, It sets it right back to the way it was before and doesn't save the permissions I want to change it to. The files aren't critical system files that are not even existent on this hard drive.
Its on a completely separate drive, Yet aren't I suppose to be in control of what gets changed to what? Instead of a Operating System doing something just for my safety? A simple AVI files permissions being changed shouldn't hurt anything. How to I stop ubuntu 10.10 from auto setting the permissions of my folders and files? Its really starting to me off right now. I've been looking around on google for Auto reset permissions for ubuntu, Haven't found one word about it. Yet I'm just going to assume someone might know how to resolve this? Or has dealed with this before.
I'm just trying to Forcefully set my folders on my separate drive all to 777 because they are all 775 and 755 and I can only access them with Write privileges if I run the SUDO file manager which I really hate having to do every so often I'm sure you can relate to how annoying it is to have to open up terminal and type something in to open a fully priviledged file manager.
I am trying to determine the frequency of a signal coming into an imx27 processor running linux os 2.6.22 If i were using a micro i would set up a timer for a set period of time and then count up the rising edges coming in. However I am not sure how to do this with C code in linux.
View 14 Replies View RelatedFinally I managed to install my printer/scanner drivers.The last thing I need to do is to add the following two lines to 40-libsane.rules (which is a read only file):# Brother scanners ATTRS{idVendor}=="04f9", ENV{libsane_matched}="yes".How can I change permissions for this file or add these lines without changing permissions?
View 2 Replies View RelatedI'm new to Ubuntu Linux but have many years on windows platform. Please can someone help me with how to change the following items.
No.1 I would like to change the HORRIBLE!! YAK!! brown background color behind the word Ubuntu in the start up screen when the machine loads up (before the login). I have located the image file for this which I have found to be: /usr/share/images/xsplash/bg_2560x1600. jpg but the OS says that root is the owner and that I don't have permission to change this. So how can I change this for a color I do like.
No.2 I would also like to change the login dialogue screen style. I know this is possible but again I'm fumbling to see how I can do this. I have tried with the start up manager but every attempt fails, the settings don't take. Once again I suspect permissions are at the bottom of the problem?
No.3 Would like to have a colorful splash screen image on boot up, I've managed to remove the old one (small white 3 ring ubuntu logo on black background) but havent been able to install or replace with a new one. Its been incredibly frustrating, I'm feel sure I'm missing something simple here. Wondering if its permissions yet again?
Anyone who can offer help on any of the above, guidance or advise me would be much appreciated. Please bear in mind that I'm still very much feeling my way with Linux so keep it simple.
If this information excists here so sorry I was not able to find it. How to change permissions in Unbuntu for those people who are trying to change persmissions in a subdirectory.
Open the terminal and then type: Quote: sudo chmod yourpermission number /thenameofyourdirectory
Example:
Quote: sudo chmod 755 /directory
I cannot change directory to a more than three folder tree destination folder from ~ in terminal. I've checked everything. No Typos or misspell. The destination folder was recognized by "ls" command but when I went to it, the terminal said, "no such file or directory."
View 7 Replies View Relatedso running latest ubuntu 9.10 karmic koala. I installed from the terminal PHP and can browse to the localhost and everything looks cool.
I try to use gedit or quanta to save a file to /var/www/
Which is where the test index.php is located but I don't have the correct permissions! I am logged in as the same user I installed ubunutu under which should give me all the rights I need.
I need to give myself permission to write into this folder?
I have a 500GB iomega portable HD. I used Gparted to split the drive into two partitions, a fat32 of roughly 400GB and an EXT4 partition of roughly 100GB.
On my EXT4 partition, there is a folder called lost+found. I can't delete it because I need to be root, yet my account has administrator priviliges (but I CAN rename the folder). I can't create other folders on this partition, nor can I copy-paste and files on there either.
Basically, that partition is unuseable. In the properties of the folder, it says that I am not the owner so I cannot change the permissions. (It is definitely MY hard drive)
All options are greyed out.
How do I give myself permission to use this EXT4 partition?
There are lots of tutorials and opinions on file permissions and web hosting.
So lets say I wanted to allow write permissions to the /var/www folder.
which would be best practice?
Chown -R user... allow a specific user to have write capabailities.
use gksudo nautilus (unsure what this does)
or open the folder to all parties.
If anyone has any opinions on file permissions in general or web hosting security then feel free to throw them at me.
i have an old desktop that i have decided to use as a central point for localhost/website files. I have 2 laptops, a ubuntu and vista, and i want them both to be able to see the public_html folder on my desktop, and be able to create/update folders and files.
I have set up the samba sharing and that's working fine, but when i create folders using my laptop, they are not writeable to the desktop or other laptop because my laptop is the creator. Is there a way that I can set it so that whenever folders/files are created from either laptop, they have full permissions?
I have installed apache2, mysql, php .. they work great! but I can move, change, paste or anything in the folder sites_available (the folder for localhost) I am really confused right now! because I have used this with xampp in XP and it worked perfectly but I cant make it work in ubuntu! I cant test my php sites!
I am really noob about configuring linux! I think I don't have permission to do anything in that folder because when I try to paste my site there it show a error saying that I am not the owner! When I installed ubuntu first I created a username: "SHPETIM" and this username is administrator and has root permissions but sometimes there are somethings that I cant do!
Sometimes even in Terminal when I type in my password (the only password that I created when I installed ubuntu) it says FAILURE! I dont know what other password it may have that I don't know! I think there is a user with username ROOT and it has another password but since I am noob I dont understand this and I dont know how it works!
I opened up my Gimp brushes folder so that I can put a brushes file into the folder. Would not let me do it. Said I am not the owner and do not have permission. I right clicked inside the folder, same thing permissions grayed out, not owner. No apparent option to log in or do anything to gain permission. What can I do?
View 1 Replies View RelatedIn trying to install an update, I deleted all the programs from my Ubuntu 9.10. Now I can not get my pictures, documents and music from the computer. I tried booting from a Ubuntu Live CD but when I get to the folder of my documents it says "you do not have the permissions necessary to view the contents of "My_Folder"". I tired the nautilus command but that only lets me view the files and not copy them.
View 3 Replies View RelatedI am running ubuntu using VirtualBox on a Macbook Pro. I wanted to share my documents folder on the Mac in the virtual machine. I had no issues creating/mounting the share folder on ubuntu. However the file permissions for the shared folder are owned by root.
Code:
drwx------ 1 root root 1088 2010-02-04 10:18 Mac_Share/
I used the following command to mount the folder:
Code:
sudo mount -t vboxsf Share_Documents ~/Mac_Share/
I checked that the folder is mounted I can see what is there using
Code:
sudo ls Mac_Share/
How do I make the folder accessible to the user? Is there another -option needed to do this in the mount command?