E: nvidia-185-kernel-source: subprocess installed post-installation script returned error exit status 127
E: nvidia-glx-185: dependency problems - leaving unconfigured
I'm not sure what other information to post.I believe I'm using the nvidia 190 file, but I've tried to remove 185 and that made me have to boot up in "low graphics mode."
Synaptic Package Manager failed with the following error:
E: Malformed line 55 in source list /etc/apt/sources.list (dist)
E: The list of sources could not be read.
Go to the repository dialog to correct the problem.
E: _cache->open() failed, please report.
With the error dialog as modal window, the Synaptic Package Manager main screen is disabled. As soon as I click "OK" to close the error dialog, Synaptic Package Manager shuts down right away.I don't know there is the "repository dialog" is to correct the problem as suggested.
whenever i tried to open Synaptic package Manager the following messages shows:
E: Type '.net/tualatrix/ppa/ubuntu' is not known on line 2 in source list /etc/apt/sources.list.d/tualatrix-ppa-maverick.list
E: The list of sources could not be read.
Go to the repository dialog to correct the problem.
E: _cache->open() failed, please report.
Ubuntu Software Center, Update Manager, Synaptic package Manager all are jammed and indicates the same error. Except these everything works perfectly.
When i run Synaptic Package Manager.I have an errorE: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem.
View 1 Replies View RelatedThis morning, Update manager downloaded and attempted to install linux kernel image and header files but failed with some sort of error. I'm trying to locate the error log for synaptic package manager. Anyway I rebooted and everything seems to work okay. Did anyone else have this problem? This is from the history:
Code:
Commit Log for Thu Jun 3 05:45:42 2010
Upgraded the following packages:
linux-headers-2.6.32-22 (2.6.32-22.33) to 2.6.32-22.35
linux-headers-2.6.32-22-generic (2.6.32-22.33) to 2.6.32-22.35
linux-image-2.6.32-22-generic (2.6.32-22.33) to 2.6.32-22.35
linux-libc-dev (2.6.32-22.33) to 2.6.32-22.35
Ubuntu 11.04 was working fine and then when I went to open Synaptic, I got the following error:
An error occurred
The following details are provided:
E: Encountered a section with no Package: header
E: Problem with MergeList /var/lib/apt/lists/viewizard.com_linux_debian_en
E: The package lists or status file could not be parsed or opened.
E: _cache->open() failed, please report.
I get this error when I try to load Synaptic. In addition to that, the Ubuntu Software Center does not work when I try to search for and/or look at applications.
I keep getting an error message when opening the Synaptic Package Manager. "E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. E: _cache->open() failed, please report." I also can't install any software from the software center. When I run the line in terminal, I get lost.
View 5 Replies View RelatedI am trying to update my system using synaptic but it always end with the error while reloading the package lists
Release file expired, ignoring [url] (invalid since 12d 5h 39min 10s)
I am using Debian squeeze amd64 gnome 2.30.2
Synaptic showing the error.
Screenshot.png (89.63 KiB) Viewed 687 times
Since upgrading to Natty I have a very annoying issue and since I am unable to resolveWhenever I start the synaptics package manager I get the following message:An error occurred:E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. E: _cache->open() failed, please report.Once I run sudo dpkg --configure -a from the terminal this is what I get:Setting up xulrunner-1.9.1 (1.9.1.18~hg20110309r27352+nobinonly-0ubuntu1~umd1) ...No further progress the machine hangs indefinitely on this, need to kill terminal to exit. Even hours waiting does not show any progress.
View 5 Replies View Relatedwhile trying to open synaptic package manager i get the following errer "E: The package clamav-daemon needs to be reinstalled, but I can't find an archive for it. E: Internal error opening cache (1). Please report."
View 5 Replies View RelatedI have used Debian Linux for two years, most recently the seventh or so iteration of Version 5. I use the Gnome desktop and the Synaptic Package Manager, not the Update Manager, for updates because it's easier to build a log with the former.In my most recent update, Synaptic stripped out all the xserver-xorg files�47 in all. I thought it peculiar but did not know enough to interfere. When I rebooted, the system told me I must install xserver or correct GDM configuration and restart.Have I been hacked? Am I being tested by the Linux Illuminati? Or does it have something to do with the warning message I received at the end of the update-upgrade, attachedDebian_error_msg.png? And how do I go about reinstalling xserver? With Aptitude? I have tried running apt-get -f install, to no effect.
View 1 Replies View RelatedI get an error when trying to run update manager or Synaptic - same thing from Ubuntu Tweak as well. I also tried to update via terminal
[code]...
I try to use Ubuntu Software Center, Synaptic or apt-get to install a package, it seems to give an error(okay, USC stops the install and Synaptic crashes), apt-get gives the traceback
[Code]....
I have a problem when installing this package through synaptic package manager. this is :
libpng12-dev
the error is:
W: Failed to fetch http://security.ubuntu.com/ubuntu/po...tu2.1_i386.deb
404 Not Found [IP: 91.189.92.167 80]
my distribution is ubuntu 10.4.
I want to install CmapTools in my desktop, which runs v.10.04. I have downloaded the .bin file from their site.Is there a way to install it using Synaptic Package Manager?
View 2 Replies View RelatedI have used Debian Linux for two years, most recently the seventh or so iteration of Version 5. I use the Gnome desktop and the Synaptic Package Manager, not the Update Manager, for updates because it's easier to build a log with the former.In my most recent update, Synaptic stripped out all the xserver-xorg files�47 in all. I thought it peculiar but did not know enough to interfere. When I rebooted, the system told me I must install xserver or correct GDM configuration and restart.
Have I been hacked? Am I being tested by the Linux Illuminati? Or does it have something to do with the warning message I received at the end of the update-upgrade, attached? And how do I go about reinstalling xserver? With Aptitude? I have tried running apt-get -f install, to no effect.
I am a relatively new user of Ubuntu and I have a question about Django 1.2 (and now we're up to 1.2.1). I currently have Django 1.1.1 installed via Synaptic.
-Generally, how long would it take for 1.2.1 to appear in a package that I can download via Synaptic?
-If I were to uninstall ver 1.1.1 and manually install ver 1.2.1, would it get installed in the same location that Synaptic installs it?
Got Karmic Koala up on running on my main computer and have been going through Beginning Ubuntu Linux, Fourth Edition. It was printed during Jaunty Jackalope, but it looks like its information applies to most areas.
However, it says I should be able to find msttcorefonts in the Synaptic Package Manage, and it's not there. I double checked Writer and Times New Roman and the other true type staples are not there, so it's not that it was installed with the boot disk.
Has the name of the package changed?
I am trying to get Ubuntu up and running on my Dell XPS 400 desktop. I verified the checksum of the iso (ubuntu-9.10-desktop-i386.iso) I downloaded, and I ran the cd check before installing. I also ran a memtest for 16 hours with no errors.
So I install Ubuntu, and everything seems ok. Now, I try to update my software packages, and the upgrade always fails after all the packages are downloaded (sometime during actual installation). So, I have to reboot, and the file system will not mount. I run fsck and reboot, and now I cannot even boot normally or to a shell... This has happened to me twice in row.
What is the best plan of attack when a package fails to install midway? I want to use Ubuntu, but this is making it pretty hard.
I'm having a problem where I can't open Synaptic Package Manager. The error message I get is this:
E: Malformed line 57 in source list /etc/apt/sources.list (dist parse)
E: The list of sources could not be read.
Go to the repository dialog to correct the problem.
E: _cache->open() failed, please report.
Here's my sources.list:
# deb cdrom:[Kubuntu 9.10 _Karmic Koala_ - Release i386 (20091028.5)]/ karmic main restricted
# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
[Code]...
Try reloading my synaptic Package manager and I get the following message after a while:-
An error occured
the following details are provided
W: Failed to fetch http://ke.archive.ubuntu.com/ubuntu/...ic/Release.gpg Could not resolve 'ke.archive.ubuntu.com'
W: Failed to fetch http://ke.archive.ubuntu.com/ubuntu/...tion-en_US.bz2 Could not resolve 'ke.archive.ubuntu.com'
W: Failed to fetch http://ke.archive.ubuntu.com/ubuntu/...tion-en_US.bz2 Could not resolve 'ke.archive.ubuntu.com'
[Code]...
I've just installed Lucid Lynx and it seems to be running fine, except the synaptic package manager is downloading things incredibly slowly. Is this just because the server is busy due to the new release?
View 4 Replies View RelatedI was running the Ubuntu Software Center when my machine froze, the mouse stopped moving etc. so I had to hard boot it.
Then I got a lot of errors and it would not boot, I got in as root and ran the fsck and fixed a lot of errors and so finally got to boot into GUI
Then I saw the red error sign which said run the sudo dpkg --configure -a to fix the problem I did, it didnt?!
It gave me the error
Code:
I found the file status-old so I copied it back into status but then I got this error:
Code:
I get this error in the X as well when I run the Synaptic Pkg Mgr:
Code:
How to re install the synaptic Pkg Mgr? Or how to get it back to run with no errors?
i am unable to open package manager or install any software, each time i try it brings up this messageE: Malformed line 5 in source list /etc/apt/sources.list (URI parse)E: The list of sources could not be read.Go to the repository dialogue to correct the problem.E: _cache->open() failed, please report.
View 9 Replies View RelatedI tried to install Redshift's PPA then an error occur, after that , my software center is not working, after i click the ubuntu software centre, nothing's happening..and also i cannot open synaptic package manager.But there is an error coming out code...
View 3 Replies View Relatedi cannot access synaptic package manager. It asks for my password and then when i enter it synaptic starts to load and gives me this error message:E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. E: _cache->open() failed, please report.
I tried entering the command listed in the terminal and got an error. Anyone know how to fix this so i can launch synaptic again?
I need some assistance on getting Synaptic Package Manager to start correctly. I can start it from the command line without any errors. When I try to use the shortcut under the /System/Administration menu it ask for the password but nothing ever opens up nor is there an error. My source list is fine. I have ran "sudo apt-get update".
View 8 Replies View RelatedE: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. E: _cache->open() failed, please report. computer froze while i was downloading something and i cannot use synaptic package manager anymore. the dpkg message came up saying --configure0a was an unknow option
View 7 Replies View Relateddoing a new install of ubuntu 10.04.2 on a computer
without the boxes to check in the other software tab, i cannot install needed software, my simply shows BLANK no matter what i do:
and yes, i already checked all boxes in the Ubuntu Software thread including restricted.
This is what appears on my screen in synaptic package manager, BLANK?
This SHOULD appear by default, without doing anything, even in a freshly installed system, these boxes should appear by default:
When I try to open SYNAPTIC PACKAGE MANAGER in my ubuntu 11.04 version, it is showing error. Following error is being displayed:
E: Encountered a section with no Package: header
E: Problem with MergeList /var/lib/apt/lists/us.archive.ubuntu.com_ubuntu_dists_natty_main_bina ry-i386_Packages
E: The package lists or status file could not be parsed or opened.
E: _cache->open() failed, please report.