I am a relatively new user of Ubuntu and I have a question about Django 1.2 (and now we're up to 1.2.1). I currently have Django 1.1.1 installed via Synaptic.
-Generally, how long would it take for 1.2.1 to appear in a package that I can download via Synaptic?
-If I were to uninstall ver 1.1.1 and manually install ver 1.2.1, would it get installed in the same location that Synaptic installs it?
I have a problem when installing this package through synaptic package manager. this is :
libpng12-dev
the error is:
W: Failed to fetch http://security.ubuntu.com/ubuntu/po...tu2.1_i386.deb
404 Not Found [IP: 91.189.92.167 80]
my distribution is ubuntu 10.4.
I want to install CmapTools in my desktop, which runs v.10.04. I have downloaded the .bin file from their site.Is there a way to install it using Synaptic Package Manager?
View 2 Replies View RelatedE: nvidia-185-kernel-source: subprocess installed post-installation script returned error exit status 127
E: nvidia-glx-185: dependency problems - leaving unconfigured
I'm not sure what other information to post.I believe I'm using the nvidia 190 file, but I've tried to remove 185 and that made me have to boot up in "low graphics mode."
Got Karmic Koala up on running on my main computer and have been going through Beginning Ubuntu Linux, Fourth Edition. It was printed during Jaunty Jackalope, but it looks like its information applies to most areas.
However, it says I should be able to find msttcorefonts in the Synaptic Package Manage, and it's not there. I double checked Writer and Times New Roman and the other true type staples are not there, so it's not that it was installed with the boot disk.
Has the name of the package changed?
I am trying to get Ubuntu up and running on my Dell XPS 400 desktop. I verified the checksum of the iso (ubuntu-9.10-desktop-i386.iso) I downloaded, and I ran the cd check before installing. I also ran a memtest for 16 hours with no errors.
So I install Ubuntu, and everything seems ok. Now, I try to update my software packages, and the upgrade always fails after all the packages are downloaded (sometime during actual installation). So, I have to reboot, and the file system will not mount. I run fsck and reboot, and now I cannot even boot normally or to a shell... This has happened to me twice in row.
What is the best plan of attack when a package fails to install midway? I want to use Ubuntu, but this is making it pretty hard.
I'm having a problem where I can't open Synaptic Package Manager. The error message I get is this:
E: Malformed line 57 in source list /etc/apt/sources.list (dist parse)
E: The list of sources could not be read.
Go to the repository dialog to correct the problem.
E: _cache->open() failed, please report.
Here's my sources.list:
# deb cdrom:[Kubuntu 9.10 _Karmic Koala_ - Release i386 (20091028.5)]/ karmic main restricted
# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
[Code]...
Try reloading my synaptic Package manager and I get the following message after a while:-
An error occured
the following details are provided
W: Failed to fetch http://ke.archive.ubuntu.com/ubuntu/...ic/Release.gpg Could not resolve 'ke.archive.ubuntu.com'
W: Failed to fetch http://ke.archive.ubuntu.com/ubuntu/...tion-en_US.bz2 Could not resolve 'ke.archive.ubuntu.com'
W: Failed to fetch http://ke.archive.ubuntu.com/ubuntu/...tion-en_US.bz2 Could not resolve 'ke.archive.ubuntu.com'
[Code]...
I've just installed Lucid Lynx and it seems to be running fine, except the synaptic package manager is downloading things incredibly slowly. Is this just because the server is busy due to the new release?
View 4 Replies View RelatedI was running the Ubuntu Software Center when my machine froze, the mouse stopped moving etc. so I had to hard boot it.
Then I got a lot of errors and it would not boot, I got in as root and ran the fsck and fixed a lot of errors and so finally got to boot into GUI
Then I saw the red error sign which said run the sudo dpkg --configure -a to fix the problem I did, it didnt?!
It gave me the error
Code:
I found the file status-old so I copied it back into status but then I got this error:
Code:
I get this error in the X as well when I run the Synaptic Pkg Mgr:
Code:
How to re install the synaptic Pkg Mgr? Or how to get it back to run with no errors?
i am unable to open package manager or install any software, each time i try it brings up this messageE: Malformed line 5 in source list /etc/apt/sources.list (URI parse)E: The list of sources could not be read.Go to the repository dialogue to correct the problem.E: _cache->open() failed, please report.
View 9 Replies View RelatedI tried to install Redshift's PPA then an error occur, after that , my software center is not working, after i click the ubuntu software centre, nothing's happening..and also i cannot open synaptic package manager.But there is an error coming out code...
View 3 Replies View RelatedSynaptic Package Manager failed with the following error:
E: Malformed line 55 in source list /etc/apt/sources.list (dist)
E: The list of sources could not be read.
Go to the repository dialog to correct the problem.
E: _cache->open() failed, please report.
With the error dialog as modal window, the Synaptic Package Manager main screen is disabled. As soon as I click "OK" to close the error dialog, Synaptic Package Manager shuts down right away.I don't know there is the "repository dialog" is to correct the problem as suggested.
i cannot access synaptic package manager. It asks for my password and then when i enter it synaptic starts to load and gives me this error message:E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. E: _cache->open() failed, please report.
I tried entering the command listed in the terminal and got an error. Anyone know how to fix this so i can launch synaptic again?
whenever i tried to open Synaptic package Manager the following messages shows:
E: Type '.net/tualatrix/ppa/ubuntu' is not known on line 2 in source list /etc/apt/sources.list.d/tualatrix-ppa-maverick.list
E: The list of sources could not be read.
Go to the repository dialog to correct the problem.
E: _cache->open() failed, please report.
Ubuntu Software Center, Update Manager, Synaptic package Manager all are jammed and indicates the same error. Except these everything works perfectly.
I need some assistance on getting Synaptic Package Manager to start correctly. I can start it from the command line without any errors. When I try to use the shortcut under the /System/Administration menu it ask for the password but nothing ever opens up nor is there an error. My source list is fine. I have ran "sudo apt-get update".
View 8 Replies View RelatedE: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. E: _cache->open() failed, please report. computer froze while i was downloading something and i cannot use synaptic package manager anymore. the dpkg message came up saying --configure0a was an unknow option
View 7 Replies View Relateddoing a new install of ubuntu 10.04.2 on a computer
without the boxes to check in the other software tab, i cannot install needed software, my simply shows BLANK no matter what i do:
and yes, i already checked all boxes in the Ubuntu Software thread including restricted.
This is what appears on my screen in synaptic package manager, BLANK?
This SHOULD appear by default, without doing anything, even in a freshly installed system, these boxes should appear by default:
When I try to open SYNAPTIC PACKAGE MANAGER in my ubuntu 11.04 version, it is showing error. Following error is being displayed:
E: Encountered a section with no Package: header
E: Problem with MergeList /var/lib/apt/lists/us.archive.ubuntu.com_ubuntu_dists_natty_main_bina ry-i386_Packages
E: The package lists or status file could not be parsed or opened.
E: _cache->open() failed, please report.
I have some programs that I have already uninstalled, but that I now realize have left behind files on my computer. I went to the package manager and selected them for complete removal, but the apply button will not work. Same with ctrl P. Is there a way to get it to completely erase these programs? Is there a better way to go about this?
View 7 Replies View RelatedThe problem below is probably related to the fact that I tried to install a 32-bit version of Teamviewer on a 64 bit system. I have now downloaded the right version, but when I try to install it I get: teamviewer6: 6.0.9224 (Multi-Arch: no) is not co-installable with teamviewer6:i386 6.0.9224 (Multi-Arch: no) which is currently installed But the Synaptic Package Manager does not indicate that Teamviewer is installed, nor does it appear under installed apps in the panel. So how do I get rid of the teamviewer6:i386?
View 6 Replies View Relatedubuntu 11.04,Windows 7 dual boot. Almost total linux / ubuntu novice.I just installed ubuntu 11.04 this afternoon. The installation went smoothly but I did not get wireless internet connection. In the top panel : Network device not working (firmware missing)Some hunting indicated that one needed to remove some files and install some others using synaptic. Found synaptic, loaded it by clicking and found the file to install. However the Package Tab was completely greyed out. Any suggestions where I am going wrong?
BTW the 11.04 is different enough that I have not yet even found the terminal so any suggestions re it, please include a suggestion on how to find it.
Whenever I start Synaptic package manager it shows some changes to apply and when I click apply it shows error E: /var/cache/apt/archives/mysql-server-5.1_5.1.41-3ubuntu12.3_i386.deb: subprocess new pre-removal script returned error exit status 1.
View 9 Replies View RelatedHave a new Dell Vostro A90 that came with 8.04 and I have installed 9.10 from a CD that was mailed to me. I can connect to the internet with a wired connection, but I cannot connect wirelessly. When I've tried to install the broadcom driver by going to Synaptic Package Manager and hitting reload, I get a message that 1 of 15 packages is downloading, but nothing downloads and I get a failed message for each of the jobs. Any clues as to how to proceed from here? I am very new to Ubuntu.
View 9 Replies View RelatedIn a moment of temporary insanity I tried to install Backuppc using the synaptic package manager, but started to panic when the installer tried to set up an Apache web server on my PC (which I do not want). At that point I tried to cancel the installation, but got an error message. I then marked the package for complete removal in the package manager, but every time I click the apply I get an error message, "E: backuppc: subprocess pre-removal script returned error exit status 2" and the package, which did not install correctly in the first place, refuses to go. When I ran the update manager today, to install the latest updates, the manager tried to continue with the Apache installation stage of the Backuppc installation. How do I get rid of it?
View 2 Replies View RelatedI am not able to update at all. Update manager returned an error reading
Preconfiguring packages ...
/usr/bin/dpkg: 1: Syntax error: ")" unexpected
E: Sub-process /usr/bin/dpkg returned an error code (2)
i get the same error if i update in a terminal or from Synaptic Package Manager.
I'm trying to install Eclipse from synaptic but it only has version 3.2 while there's a version 3.5 out there. How do I get synaptic to provide the latest versions of anything?
View 6 Replies View RelatedAfter installing the 'getdeb' and 'playdeb' debian packages that automate adding those repositories for [URL] my synaptic package manager started acting up giving me this error: ould not download all repository indexes The repository may no longer be available or could not be contacted because of network problems. If available an older version of the failed index will be used. Otherwise the repository will be ignored. Check your network connection and ensure the repository address in the preferences is correct. Problem executing scripts APT::Update:re-Invoke '/usr/bin/daptup --pre'Sub-process returned an error code I am a long haul 48 state truck driver and it may be a couple days between replies until I can get to the next Wi-Fi hotspot.
View 3 Replies View RelatedEvery time when I click on reload button in synaptic package manager I get these messages:
W: Failed to fetch http://in.archive.ubuntu.com/ubuntu/...ty/Release.gpg Could not resolve '1@192.168.0.4'
my internet connection has http proxy with address 192.168.0.4 and port no. 3128. every time when i click on reload button in synaptic package manager i get a lot of above messages. btw i am using ubuntu 9.04.
When i run Synaptic Package Manager.I have an errorE: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem.
View 1 Replies View Related
