I am looking at switching from the 10.04 desktop version to the netbook remix version.I was wondering the easiest way to do this, and if I will lose all my files in the process.. I have an Acer Aspire One A0532H-2254 10.1" and a lot of Windows wont fit in my smaller screen, which is extremely frustrating.Also, if doing so would cause me to lose all my files, best way to back up about 56 Gigs of movies and music?
View 2 Replies
how to switch to a different version of KDE without difficulty? I've never changed desktop software in the same installation of a distro before. Pursuant to [URL] , I want to try KDE Trinity (which, when I first heard of it, I didn't realize was a version of KDE) and, if I like it, replace my KDE 3.5 with it. Obviously, I can't remove KDE 3.5 completely before installing Trinity; and even if I have 3.5 and Trinity installed simultaneously (can I?), I'm guessing that only one of them will ever be available in the "session type" option at system startup.
View 9 Replies View RelatedI need to test my code under different versions of GCC. At leat GCC 3.4 in addition to the default. I was hoping I could simply do the switch from CodeBlocks's build settings... Of course, it's not that simple.
By the way, GCC 3.4 is not even in synaptic manager. I suppose some apt-get install command can do it.
ideally I'd like to be able to switch between versions. I've heard of ccontrol, but I'm cautiously posting here before for any advice before blowing up my set up.
I have a dell inspirionB130 and I installed mandriva dual boot with windows 7.. However I was not able to connect to a wireless network, but yet I could when i switched back to windows 7. Ive also just been wanting to try other versions of Linux to see which one I would prefer.. But Im not really sure on how to uninstall Linux or replace it with different version.. I have read in this link Mandriva Installed with Windows; Looking to try another Linux Distribution Read more: URL... here and I was wondering if this was a correct way of doing it, I just didnt know if some kind of conflict would occur when doing this, or if other people suggested a different way.. Specifically talking around middle of the page under "Mandriva Installed with Windows; Looking to try another Linux Distribution"
View 2 Replies View Relatedi would like to replace my Ubuntu Desktop version with the Netbook version. I dont mind losing my current data on the desktop version but if there is a way for me not too i would love to know
View 2 Replies View RelatedI have installed Ubuntu 10.10 desktop version on my Lenovo L420 laptop. Now my friend told me that if I had installed laptop version on it then it would have recognized events related to laptop like closing down the laptop screen and all.
Q1. Is there any way by which I can upgrade it to laptop version?
Q2. What are the differences between both?
So I did a
Code:
sudo apt-get install ubuntu-desktop && sudo apt-get purge ubuntu-netbook*
To switch from UNR to the Desktop version.
Everything is fine except for the fact that when I have a maximized window, I do not have the minimize, maximize, and close buttons.
I have a feeling I just need to tweak something in gconf-editor, but I can't seem to find the correct setting.
Just got my AW M11x and I am following a thread on installation issues and work around. My question is should I install the desktop version or the Netbook version? Not sure the best location to post, if incorrect please move accordingly Wanting to run gimp, open office, wine to access MS office (use for school) and possibly install photoshop for raw work gimp cant handle.
View 5 Replies View RelatedHow can I disable the virtual desktop switching when my mouse gets close to the edge of the current desktop. I prefer to switch desktops by using the virtual desktop module in the shelf, but I would like to be able drag windows another desktop.
resource website for e17? I'm having trouble finding answers to my questions from the lack of guides provided for e17.
i cant't seem to find a way to do it.
I successfully add a keyboard shorcut to launch konsole manually with khotkeys, but i don't know what command to bind to move to right, left, up, down desktops like in ubuntu.
For example in ubuntu there is ctrl+alt+arrow and ctrl+alt+shift+arrow to move through workspaces and move windows between them. Not so in kubuntu.
I have both xmonad and Gnome installed and tend to switch between them quite often. Normally, I need to log out and log back in which is starting to become annoying because I need to open any running applications again.I have tried using "Switch User", but it doesn't work. I go to the switching screen when I am logged into Gnome and log in again after selecting Xmonad, but it brings me back to my Gnome session.
So is there any way to log in as the same user with two different desktop environments at the same time?
I have a question about switching between desktop environments like kde and gnome. I'm using ubuntu 10.04 with gnome 2.x and with a really cool theme I found and mixed. I would like to check kde desktop because I kinda like the appearance of it. I have also cairo dock and compiz configured for my needs. my question is whether I can switch to kde desktop without losing my customized gnome environment if I decide to switch back to gnome? (I know that to switch session you need to log out but that's not the point) the next question is how can I install kde without losing the customized gnome theme I have ?( if the answer for the first question is negative)
the final question is whether I lose data when I switch desktop and if do than what specifically.
currently i run both KDE and Ubuntu Unity 11.04 on my machine. I have encountered a little problem when switching desktop environments. With KDE, i prefer to use KWin as my windows manager (since i find it highly polished), and with Unity, compiz (not by choice). The problem is that if i don't switch the windows manager to compiz before switching over to unity, all hell breaks loose. Same with switching over from Unity to KDE.
The only solution i have found is to switch to Classic Ubuntu. and use the compiz fusion icon to select the windows manager in order to avoid any problems.
when i log onto the either KDE or Unity, how can i load the correct desktop environment in case it crashes (which it has)?
Note: this has also become a concern to me because of 11.10 removing the classic gnome. If the proper window manger can be loaded before entering the preferred desktop environment KDE, Gnome3 or Unity,
So I have decided to switch to ubuntu since xp gave out on me. Everything seemed so easy during install untill it randomly shut off. It now does this during different stages of installation but never gets further than after entering my user details and beginning the install. Its not faulty hardware as boots into xp home ed fine. I want a full install of ubuntu only though.I have tried both 10.04 and 10.10 (32 bit) booting from Live CDs (3 diff copys, as was paranoid of probs with the iso download)
The hardwares largely unknown but easily ran xp media center previously a year or 2 before. I'm very confident its not underpowered for this.As you can probably tell I'm completely new to this and not overly technical. I have looked around and some things suggest a problem with graphics cards.
When I switch viewports in 11.04, the gnome panels, desktop and stickied windows slide when they would stay put in 10.10. How do I change back to the previous behaviour? I'm using Ubuntu Classic (Gnome 2) and love that Compiz didn't carry over my settings during the upgrade.
View 1 Replies View RelatedI recently tried out the awm version of the desktop environment. When I switched back to the Gnome desktop, I found a couple of titlebar-like artifacts left on the desktop.I did some experimenting, using System Monitor and the Kill xxxx command and managed to rid myself of one of the artifacts. The remaining artifact can be taken care of by using kill xxxx comand for the gtk-window-decorator but, this basically renders window buttons useless after the command is issued.
I think I had a couple applications running at startup in Gnome desktop before I switched to awm, and they didn't start at startup when I returned to Gnome desktop, but the titlebar-like artifacts did.Is there a way to reset the state of the gtk-window-decorator in a manner that is less destructive, and which allows my desktop to be clear of this artifact?
When switching users or logging out and then back in, the unity desktop will be shifted to the right, so that the clock, power button, etc. is off-screen. This does not happen every time, but seems to be about 50% of the time.It looks to be shifted about the width of the toolbar on the left, so that there is a blank column the width of the toolbar, then the toolbar. So, maybe some screen position data is not being reset at log out
View 1 Replies View RelatedIm using xfce desktop environment in debian. I find that I can not see the desktop when using Ctrl+Alt+Tab to switch window focus. I modified /usr/share/xfce-mcs-plugins/shortcuts/defaults.xml and added Ctrl+Alt+Tab shortcut to trigger a terminal command "wmctrl -k on", then i could see the desktop, but failed to switch window focus. Also, I failed to solve this problem by editing /usr/share/themes/Default/xfwm4/keythemerc Could anybody tell me a solution that you should be able to see the desktop when switching window focus, just like in win7?
View 8 Replies View RelatedI frequently find myself accidentally switching desktops when I use the mouse scrollwheel, because the cursor isn't over a window at the time. I'd like to disable this behaviour, but I can't see any control for it in KDE System Settings.
View 2 Replies View RelatedI have 2 workspaces and when i switch to the 2nd one (either with Ctrl-Alt-Left or by clicking with the mouse) after loging in, the desktop freezes. I have to do a Ctrl-Alt-Backspace to kill the xserver and log in again. Removing the workspace switcher and adding it again does not solve the problem. And I can't find any message in the logs.
[code]...
As my inspirations forced me to download Kde desktop on my Fedora12 with default gnome desktop. It took me whole night to get the big download by -
"Yum install @kde-desktop"
It got installed successfully.
What I did after that was -
"switchdesk kde"
...Voila...and strange thing happened. The gnome remained there but all the kde features started getting included in there like koffice, kopete etc . Now I waited for around 3 hrs. but only lower task bar of kde got installed and that too very unstable. So I thought of logging out and starting a new session with kde but It never got logged in again. It froze at boot time with Fedora logo, damn.
I have two kernels installed and configured at boot, one is 2.6.31.X (default) and the other is 2.6.32.X which I installed to get my BCM4312 wireless activated and all the activity being done on this.
I'm using ubuntu 11.4 ,during switching bitween ubunu, xubuntu, xfce desktop environment I lost my task bar. now I have no access to all the software.the only icons I can see are the ones I had on the desktop.
View 6 Replies View RelatedLucid is not in testing but it's released.It seems it works now, with all desktop effects activated and switching users and closing sessions.The only thing I still don't know is which screensaver can I use if removing gnome-screensaver?
View 1 Replies View RelatedOk so i have a IOn based PC that i use for only xbmc. I previously had a full ubuntu 9.11 install.
I had to reformat the drive but i could not get audio working. I gave the ION Optimized live CD a go and it worked with HDMI audio running perfectly. The thing is when i close xbmc i don't have a desktop, it just goes to command line.
I need to install lirc, copy some keymap files into my xbmc folder and then setup wireless. What would be the best way? Can it all be done through command line? Can i install a desktop environment?
I got the fresh installation of Ubuntu 10.04 desktop version.But it asked for username and password to login. I didn't set any username and password.I tried tose ubuntu and blank.Try ubuntu - it still ask for username and password .Install ubuntu - it still ask for username and password .
View 9 Replies View RelatedWhere would I find the very latest (daily build) of the desktop version of Maverick ?
View 1 Replies View RelatedI have a 10.4 Remix on a 7" eeepc. It has to be the coolest desktop ever.
Just installed a 10.10 Beta on a PC, and wonder what I have to do in order to convert the stock desktop (Gnome?) into a "remix" type desktop with all those cool icons and menu organization.
The install of 10.10 Beta "just worked". Great!
I'm an absolute biginer with UBUNTU witch I just install to start trainning PHP/Mysql. I've instaled UBUNTU Desktop. Is it enough or should I install UBUNTU Server? That is, can I install PHP and MySQL on this DESKTOP version?
View 2 Replies View RelatedI'm trying to install the desktop version on my laptop but i'm having an issues. I wrote the .iso file on a CD and restart my pc to boot. So -> the pc founds the medium, i'm choosing the language, i'm choosing "Install ubuntu" and nothing happens. The dots srarts to blink and that's all. When i press anykey opens an cmd promt (something like that) and there's a lot of errors - for example: ... file failed to open due to unknown user id", some files are missing and so on. I tried "try ubuntu without installing" but the same thing. I hear a sound (i guess this the "srart sound" of ubuntu) and that's all. The orange screen, the icon in the middle and the blinking dots. I made two CDs - one burned with win 7 integrated soft - right click and "burn disk image", and other burned with infra recorder. Nothing changes.
View 1 Replies View RelatedI'm trying to install Ubuntu Netbook Remix 10.10 on my Acer Aspire One A0751h, but when I boot from my USB drive (I have multiboot ISO) I only get Ubuntu Desktop 10.10. I've tried the same USB drive on two other laptops - one netbook and one mobil workstation - and both of them boot into the Netbook Remix. Is there any rational reason for this or???
View 5 Replies View Related
