Im really new to Linux much less Compiz. When I try to start in the terminal this is what I get. What can I do?WARNING: Application calling GLX 1.3 function "glXCreatePixmap" when GLX 1.3 is not supported! This is an application bug!WARNING: Application calling GLX 1.3 function "glXDestroyPixmap" when GLX 1.3 is not supported
View 1 RepliesWhen boot-up in Ubuntu 10.04LTS and open my webpage, I can only see 1/4 of the page. The temporary fix that I have found is 'compiz --replace', BUT IS THERE A PERMANENT FIX? Below are the warnings I get after the temp. fix. compiz --replace
WARNING: Application calling GLX 1.3 function "glXCreatePixmap" when GLX 1.3 is not supported! This is an application bug! Couldn't find a perfect decorator match; trying all decorators Starting gtk-window-decorator WARNING: Application calling GLX 1.3 function "glXDestroyPixmap" when GLX 1.3 is not supported! This is an application bug!
I have a question about calling an asm function from C....It doesn't work unless I create an asm variable to hold the value of the function in....Why?Here's the code that doesn't work...
asmfile.s - version one Code: .section .data
mydata: .ascii "this is the message!
.equ mylen, . - mydata
[code]...
I am doing a web site program and what I need is to call a C program in the PHP cloud.Do u think it would be possible? The web site would get the user input from PHP UI and pass to the C program , the C program would process the function with the user input and output the a PHP page.
View 2 Replies View Related[URL]
Code:
/* bsearch example */
#include <stdio.h>
[code]...
I read somewhere that you should not be reading config space to determine the irq value to pass as the first argument to request_irq(). What is the proper way to determine the value of the 'irq' argument before calling this function? Hope this is the correct forum. I don't see one for drivers.
View 1 Replies View Relatedlets look at code in C
Code:
#include <stdio.h>
#include <stdlib.h>
[code]...
Error while calling capget function (EINVAL)
View 1 Replies View RelatedI have a new problem; i want to call a subroutine's fortran which have a function in the argument and the compilation ran properly, but when i execute the program this shows me an "Segmentation fault". This is my c++ program:
Code: //Main.cpp
#include <stdio.h>
#include <iostream>
[code]....
This is my first post. I am unable to call some of the fftw3 library functions in a very simple fortran code. The code is as follows (the filename is trial.f):
Code:
program trial
implicit none
[code]...
My calling application will accept only strings and interger. we are replacing RSA bsafe library to openssl. using RSA bsafe, we have generated the private and public key in BER format. Then convert the keys, BER format into ASCII format to send the calling function. (these everything done by using RSA supplied bsafe library) same way i have to right using openssl..i m now able convert the RSA public and private key into DER format
rsa = RSA_generate_key(1024, 3, NULL, NULL);
{
size_t size;
[code]....
I want to call a application file in user space through a character driver running in kernel space.
View 1 Replies View RelatedI am writing device driver in which i have to call callback function from kernel space, which are saving my data. But the callback functions are in userspace. While accessing them i am getting segmentation fault.
View 1 Replies View Relatedwhen i call the "system()" function from my C program everything works well, but when i try to call it from a cgi C program it doesn't work. the server log tells me this is a permission error.i have chmod'ed 755 the cgi program but it still does not work.
View 5 Replies View RelatedI am running Fedora 12 with clean install. last updated 1/8/10 AM.Trying to install chkrootkit I get the following when running "make sense":
gcc -DHAVE_LASTLOG_H -o chklastlog chklastlog.c
gcc -DHAVE_LASTLOG_H -o chkwtmp chkwtmp.c
chkwtmp.c: In function �main�:
chkwtmp.c:95: warning: incompatible implicit declaration of built-in function �exit�
[code]....
I have the plugin installed ok and have pasted in a C source file that I know works and am getting the following errors, I think because the linker options need to be set in some way. I cannot copy the errors but they all complain of implicit declaration of functions like this: -
warning: implicit declaration of function strlen
But I have the headers included, is this a linker problem? Here is the code -
#include <stdio.h>
#include <math.h>
int main(){
[code]...
after installation of a s/w for authentication from my ISP I couldnt launch the same and the following msg appears
pradipta@linux-auem:~> sudo sifyconnect
root's password:
pradipta@linux-auem:~>
(sifyconnect:5062): Gtk-WARNING **: cannot open display:
Deskjet-F4400-series
--------------------
Type: Unknown
Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend.
Device URI: usb://HP/Deskjet%20F4400%20series?serial=CN9C1CK70705C5
PPD: /etc/cups/ppd/Deskjet-F4400-series.ppd
[code]....
how do I get the printer installed in hplip? I can print but cannot scan. xsane will not recognize printer. Jaunty 64bit 2GB Ram 350GB HD
Cannot compile? warning: incompatible implicit declaration of built-in function "printf" I have build-essential.
View 5 Replies View RelatedHow can it be determined whether a function defined in some file of an application source-code(meant for multiple operating systems e.g., Linux, AmigaOS) is actually called when the application run on Linux?
View 9 Replies View RelatedDoes declaring variable inside a function give an extra overhead on an application? Would it be better to declare the variable globally and just reuse it? Example
Code:
#include <blah>
char mybuffer[2048];
int main()
[code]....
The only difference is the declaration of my variable. Since myfunction() will be called many times will it add an additional overhead if it will create mybuffer[2048] over and over?
Seems like I'm having a problem with libpng. I've created a simple SDL app and last night it worked perfectly. Today, I tried it out again and it gave me this error.
Code:
libpng warning: Application was compiled with png.h from libpng-1.4.3
libpng warning: Application is running with png.c from libpng-1.2.44
libpng error: Incompatible libpng version in application and library
I didn't mess with anything related to libpng and I'm not sure what the problem is. I didn't even know I had libpng-1.2.44 installed. I'm not sure if this is an SDL_image problem or libpng or if it's just my path is wrong.
Code: Warning: fsockopen() [function.fsockopen]: SSL: Success in /var/www/krai/class.smtp.php on line 105
Warning: fsockopen() [function.fsockopen]: Failed to enable crypto in /var/www/krai/class.smtp.php on line 105
Warning: fsockopen() [function.fsockopen]: unable to connect to ssl://smtp.gmail.com:465 (Unknown error) in /var/www/krai/class.smtp.php on line 105
Those 3 errors popups when i chroot my webroot dir, without chrooting it works fine and email is send.
i just tried to install Ubuntu Netbook 10.04 on my old Amilo Lifebook P Series. But after the boot screen and the choice to install Ubuntu i get stuck at the Ubuntu screen with the little dots on the bottom If I hit esc i can see the warning (process 257): GLib-WARNING **: getpwuid_(r) failed due to unknown user id (0)
View 2 Replies View RelatedI bought a multifunction stylus sx218 Espon model and I can not run the scanner function. I did some research and found a few solutions and very functional. I hope someone solves the problem. My version of openSUSE 11.2.
View 9 Replies View RelatedCode:
#include <iostream>
using namespace std;
[code]...
I am doing some Linux kernel programming for my research project. I need to record the timestamp (by using cpuid and rdtsc) when an interrupt handler (top half) is first invoked. Due to the time critical nature of the problem itself, I have to do the timestamping inside the interrupt handler itself (the first operation when the handler is called). However, I understand that tasks that are not so time critical should be deferred to a tasklet function (bottom half) for processing because other interrupts are disabled in a (top-half) interrupt handler. I am currently out of idea on how I can pass the timestamp information that I have obtained in the interrupt handler to the corresponding tasklet function.
View 2 Replies View RelatedI'm currently using OpenSuse 11.1 web server. This is bad since 11.1 is no longer supported. the reason why I am using it is because Function set_magic_quotes_runtime() was no longer being used. (so I was told)
That being said, is there a way to get Function set_magic_quotes_runtime() to function on the newer versions of OpenSuSE?
the function terminates if no key is pressed for 10 consecutive seconds. I tried using the -t option as suggested in some forums, but my version of showkey doesn't have the option of changing the timeout. The options I get are:
-h --helpdisplay this help text
-a --asciidisplay the decimal/octal/hex values of the keys
-s --scancodesdisplay only the raw scan-codes
-k --keycodesdisplay only the interpreted keycodes (default).
Is it possible to write a script to use this function and still keep the function active until an interrupt is recieved?
I looked on the net for such function or example and didin't find anything, thus after having made one i guess it would be legitimate to drop it to see what others thinks of it.
#!/bin/bash
addelementtoarray()
{
local arrayname=$1
[code]....