Ubuntu :: Upgraded To 9.10 From 9.04 - No Audio
Jan 7, 2010Upgraded to 9.10 from 9.04. I now hove no audio whatsoever. Nothing is muted, and audio output seems to be set to Dummy Output, with no other choice for output.
View 1 Replies
ADVERTISEMENT
Ubuntu Installation :: Upgraded Acer 2930 And Lost Audio Output
Oct 12, 2010I have upgraded my acer 2930 and I have lost my audio output
View 5 Replies View RelatedUbuntu Multimedia :: Gtk-RecordMyDesktop - Capture On-screen Audio And My Webcam Audio At The Same Time
Jan 10, 2011How I would capture on-screen audio AND my webcam audio at the same time.(My webcam seems to rely on pulse).
View 1 Replies View RelatedUbuntu Multimedia :: Error - Audio Codec Missing And Doesn't Play The Audio
Jan 30, 2011I want to listen to this audio file: [URL] but my real player 11.0.0.4028 gold desn play it, it says that there is a codec 28_8 missing, I go to relaplayer page, download the last release available for linux systems, but the message is the same : audio codec missing and doesn't play the audio.
I havev tried to play the audio with smplayer (not luck), vlc can play the audio but the pause button doesn't work so I have to listen the entire audio all the time I stop it playing. Is there any audio player capable od reproducing in the proper way this audio in ubuntu? No one of my video players totem, smplayer, realplayer or vlc are capable of playing this video: [URL]
Ubuntu :: Streaming Audio - Capture Outgoing Audio On Windows Computer - Stream It Across Wifi To Netbook
Sep 20, 2010I am fed up of listening to my (Windows XP) gaming computer through headphones so I want to get it hooked to the stereo.
Rather than use a heck of a lot of wire, I can sit my Ubuntu 9.10 netbook on top of the stereo and stream the audio across WiFi.
So, ideally what I am after is something to capture the outgoing audio on the Windows computer, stream it across the wifi to the Ubuntu netbook and finally play it through the speakers.
Ubuntu Multimedia :: Ripping Audio CDs Besides Rhythymbox And Audio CD Extractor?
Apr 9, 2011What is available for ripping audio CDs besides Rhythymbox and Audio CD Extractor?
View 6 Replies View RelatedOpenSUSE Hardware :: Why Alsamixer Recognize Default Audio Device As HDA Intel Not USB Audio
Aug 7, 2009I have behringer UCA202 usb card, after plug to usb, it just works , I have only small problem with alsamixer, which still shows by default my integrated HDA Intel, I could switch it by F6 or by alsamixer -c 1no problem, but I expect that default card is now plugged "USB audio", so why alsamixer recognize default audio device as HDA intel and not a USB Audio ?anyone who has two or more sound cards with the same issue ?
View 3 Replies View RelatedOpenSUSE Multimedia :: 11.1 Updates To Pulse Audio In Gnome Improve Audio Functionality ?
Oct 17, 2010I'm thinking of installing openSUSE-11.1 Gnome on a Fujitsu-Siemens Amilo 7400M laptop because the wireless in Gnome is much more user friendly than KDE3/KDE4 in openSUSE-11.1. The idea is to give this laptop to my 84-year old mother and things need to 'just work' for her (she currently has a desktop running openSUSE-11.1 KDE3 that uses a WIRED interface to the web).
I refuse to update this laptop to openSUSE-11.2 nor 11.3 (nor other recent distributions) because every kernel update after the 2.6.27 kernel has broken the Intel i855GM graphics drivers for that laptop. There are many bug reports and none have fixed the problem for this Fujitsu-Siemens implementation of the i855GM graphics.
Hence I am looking at Gnome.
I booted the laptop to a Gnome openSUSE-11.1 liveCD and wireless is easy and works great. But audio is very very VERY bad. It is incredibly user unfriendly and it does NOT work well. I assume that is because pulse audio in openSUSE-11.1 was very immature.
I note these updated packages in the openSUSE-11.1 update repository:
Code:
So my question is, did the updates to pulse audio (in the openSUSE-11.1 update repository) fix the pulse audio situation? Are there ANY helpful views on this?
Currently my wife is using this laptop with KDE-4.4.4 (and openSUSE-11.1) so I can't just install Gnome and play with it without taking the laptop away from her for a while (note the hard drive is too small for a dual boot of KDE/Gnome).
General :: Unable To Listen To Any Audio File Due To Lack Of Corresponding Audio Driver Programs
May 10, 2011I have been using windows operating system for a long time now, but I am not well familiar with linux. Whenever I used to install Windows, I used to install the corresponding audio drivers(in order to listen to the music). The problem I am facing is that I do not know how to install the audio drivers(if they really exist in linux Mint 10 operating system). As a result I am not able to listen to any audio file due to lack of corresponding audio driver programs. make proper configurations settings so that I can listen to audio files in Linux Mint version 10.
View 4 Replies View RelatedFedora :: Getting The Pulse Audio Server To Find The Hw0 With The Common M-audio 24/96 Audiophile
Nov 18, 2009I am having trouble getting the pulse audio server to find the hw0 with the common m-audio 24/96 audiophile. This card worked with previous versions of all forms of pulse but seems to bork on the HW0 function for audio out...which is a stereo analogue simple output. Audacity sees the HW functions but pulse does not! Here is a screen shot of the pulse crap. And another screen shot of what the real card at "alsamixer -c 0" sees. There is no dac or adc detected or configured with pulse. This does not make any sense as alsa and alsamixer has all the correct device controls available to any other software that uses the ice1712 driver.
I am using Fedora 12 amd 64 as a live usb on a 16 gig stick and want to be able to record and mix audio on to HD with my reliable high end m-audio pci sound card without having to mess with the pulse crap or having to install a full HD option. BTW in the pulse sound configuration gui dropdown list there is no indication of HW0 and the only devices that are available in pulse are digital outs.....go figure, so essentially I can see all the correct connections and use programs that access alsa directly eg: audacity but have no sound through the crappy and ever borked pulse audio server! Any suggestions as to how to remove all the pulse stuff that comes with most distros that use gnome? I have done this deed before with Ubuntu but do no know how to do the deed with an rpm based system. If I install a non pulse version of xmms and let it use jackd then I should have reliable sound for cd audio etc and should be able to configure VLC, Ardour and Nted well without pulse getting in on the action and screwing up my sound.
OpenSUSE Multimedia :: Audio Choppy - Can't Play Any Audio With Amarok When Desktop Effects Are Enabled
Jun 7, 2011to start off, i'll post the specs of the machine:
dell inspiron e1505
3.2 gb ram
1.86 ghz intel core duo
ati x1400 gfx
opensuse 11.4 kde 32 bit.
okay, here are the details: can't play any audio with amarok when desktop effects are enabled because the minute a window is moved, it will distort the audio. even when disabling desktop effects, some applications still cause this. can't play videos videos even with desktop effects disabled because of the same reason.
i just switched from ubuntu and when i ran version 11.04, i had to disable kms to do anything. i tried on opensuse 11.4 and the audio was flawless but the gfx went all to hell.
Ubuntu Multimedia :: M-Audio Delta 66 And ATI HD Audio?
Jun 1, 2010I am having some issues with getting Ubuntu Studio 10.04 to work correctly on my system. Everything works fine except sound. I have a M-Audio Delta 66 audio interface and my onboard sound is disabled. When I run the command alsaconf I can see the ICE1712 card without issue. However when I run alsamixer the only option it is giving me is my HD sound from my ATI video card. For some reason it seems the ATI card has locked the audio to it with no way to remove it. I have reinstalled the alsa drivers for my card and can only see it through alsaconf. When I tell alsaconf to configure the ICE1712 card it says it configured it properly.When I run the command envy24control it says no ICE1712 cards were found.
View 9 Replies View RelatedUbuntu Multimedia :: Flv Video + Audio To Ogg Audio Only?
Dec 22, 2010Is there an application that anyone knows about that I can use to convert either an .flv or .ogg file that contains both audio and video to just an audio .ogg file (preferably vorbis+theora) without audacity? I'm fairly certain audacity could accomplish this but it seems like overkill for what I'm trying to do and the computer I'm trying to use does not run it so well.
::EDIT:: I should also mention that I've tried looking on google. I did find downloadhelper extension for firefox which uses ffmpeg to convert the files but I don't see any obvious way to strip the video.
OpenSUSE Hardware :: 2 Audio Cards - How To Redirect Audio Streams
Feb 7, 2010on my PC I have 2 sound drivers, one from the mainboard (AC97) and one PCI card (ES1969). Because the mainboard sound path did not recording, I installed the PCI sound card and with 11.1, I managed it to play and record all audio data. With 11.2 the PCI sound path plays the system sounds (suse start-up or shut-down sounds) but not the streaming audio data (skype, flash player). But these are played by the mainboard audio instead. The audio-tests from yast->hardware->sound work for both paths. How should I configure the system to redirect the audio streams to the desired (PCI) audio path? The PCI audio is set as primary sound card and is not muted.
View 2 Replies View RelatedGeneral :: Windows - Send The Same Audio Output To Two Audio Devices?
Aug 23, 2010Say I have 2 speakers connected to 2 different sound cards. Under Windows, is it possible to have some sort of virtual device that would forward an audio stream to both sound cards? If this can't be easily done under Windows, a solution for Linux is also fine. lternatively, if the 2 speakers are connected to different channels of a sound card, is there any vendor-independent way to duplicate audio to both channels?
View 1 Replies View RelatedFedora :: Audio In - Audio Out Passthrough - Manage The Volume ?
May 18, 2011The workstation is running FC14.
I have the audio out of the media machine passed into the line in on my workstation. It's just handly to have the audio pass in this way so that i can manage the volume or headphones or whatever from one machine.
This worked, and worked well, for a very long time. I recently reinstalled the workstion, FC14 still. After the reinstall, my passthrough doesn't work.
If i start up some media on the media machine, and then open up the volume control on the workstation, i can see the volume meter moving along with the audio, but nothing plays out of my speakers.
General :: Audio Card - Unable To Get Streaming Audio
Oct 29, 2010i have opensuse 11.3 (64-bit) installed. kde version. my sound card is a creative labs sound blaster x-fi xtreme audio, pcie interface. i am able to listen to cd music without any problems but i am unable to get streaming audio when i visit any internet radio site, videos, yahoo!tv, etc. etc. for instance, when i visit videos, the video part is ok but i cannot hear anything through the speakers. something similar happens when for instance i go to [url] and select any of the music channels. a new window pops up but the music never even starts to stream.
i know for a fact that both sound card and speakers work fine because i've tested them with windows xp. so there must be some setting in opensuse that i've missed. the weird part is that i can listen to music cds without any problems...
Fedora Hardware :: Audio Devices Gone - No Audio With F12
Apr 3, 2010Right after I installed F12 on my desktop (using KDE), System Settings showed 4-5 audio devices.
At the beginning, sound wasn't working, so I promoted the Intel audio device to the top of the list and then I got audio.
Next login, the system complained that there were unmanaged audio devices and I chose to keep the configuration (or something like that...).
However, now only the "Internal Audio Analog Stereo" device is listed and I have no sound again
I also tried to promote the GStreamer backend over Xine, without luck.
Here are some specs:
Ubuntu Multimedia :: Use In Kubuntu 9.10 Audio Codec - <voxware Metasound Audio Codec>?
Jan 26, 2010how I can use in my Kubuntu 9.10, audio codec - <voxware metasound audio codec>? P.S. Sorry for my bad english. I look forward to an answer,
View 7 Replies View RelatedUbuntu :: Upgraded To 10.04 From 9.10 Without Server?
Apr 30, 2010I want to upgrade without using the on screen updates. Can I do this from the iso?
View 6 Replies View RelatedUbuntu :: Moving To LTS From Upgraded 10.04
May 18, 2010I have just got my 10.04 LTS CD from Canonical.
I was too impatient and upgraded to 10.04. The up-gradation was not without its flaws, but I have worked around a number of issues and I am happily working on it now.
I have installed a number of other software on the 10.04 upgraded version like Eclipse, GATE (NLP software), BasKet Notes, Thunderbird etc. If I install the LTS version will I have to re-download and install all of these things? Or is it portable?
I use only Linux on my laptop and so the stability is very important.
Ubuntu :: Upgraded From 9.10 To 10.04 And Nothings Gone Right?
Jun 22, 2010Was enjoying ubuntu 9.10 without any issues then foolishly thought an upgrade to 10.04 would be a good idea but since hav`nt been able use the internet on my linux pc due to connection problems using a 3g dongle.Thats another issue altogether what i wanted to ask here was in the terminal i keep getting [sudo] password for rjb: but then im not able to type anything
View 3 Replies View RelatedUbuntu Installation :: Upgraded To 10.10 But Can't Use 2.6.35-22
Oct 21, 2010I upgraded a week ago to ubuntu 10.10 (amd64). I was unable to boot in 2.6.35-22 so I have been using 2.6.32-25. I tried again last night after installing updates to 2.6.35-22. Still no luck.I gave up since this was much like what happened a week ago and I couldn't find any solutions then. (I ran memtest then.)
View 3 Replies View RelatedUbuntu Installation :: Upgraded To 10.04 And It's DOA?
Nov 12, 2010The software manager has been nagging me to upgrade from 9.10 to 10.04 for some time now. I finally gave in and clicked on Upgrade. After the upgrade completed, my computer won't start. It just flashes Ubuntu for a split second and goes to a black screen. I happen to have the 10.04 CD from Canonical, and I tried that, and it won't launch the installer either; just a logo and a black screen. Since I can't even get to the terminal to diagnose and fix whatever's wrong, I'm installing 9.10 from the CD that I ordered from Canonical a long time ago. I went through all the graphical options just like the first time I installed 9.10, and it's in the process of installing right now.
I don't really have time to futz with it because I need my laptop for when I go and visit my mum for Thanksgiving. Maybe I'll try after the holidays if I can get some feedback on what might have gone wrong with 10.04.
Ubuntu :: Upgraded From 10.10 To 11.04 And No Backlight?
Apr 28, 2011The title says it all. I am using an Acer Aspire laptop that I upgraded from 10.10 to 11.04 today. There is no backlight. What's the fix?
View 9 Replies View RelatedUbuntu Networking :: Upgraded To 9.10, Now Can't Get Online?
Mar 8, 2010A couple of weeks ago I connected my desktop to the internet and upgraded Ubuntu. I haven't used it since then, until today, when I took the ethernet cord out of my laptop and stuck in in the desktop. The light next to the place you plug the cord in came on and Ubuntu tried to connect, but eventually it just said "You are now disconnected." I restarted and it continued to do this. I plugged the ethernet cord into the laptop and now I am online. What is going on here??
View 4 Replies View RelatedUbuntu Installation :: Upgraded To 10.4, Now XP Won't Boot?
Apr 29, 2010I've looked in the grub.cfg file, and it has :
Code:
#
### BEGIN /etc/grub.d/30_os-prober ###
[code]....
Ubuntu :: Upgraded To 10.4, And Now Goes To Busybox While Booting?
May 1, 2010I did the update from within 9.10 to 10.4. Now when Ubuntu boots up, something happens and it goes to busybox. I tried sitting there and waiting, but nothing happened. So I tried typing exit, and then about a minute or two later it finally finished booting.
It's real nice that everyone else is reporting 20-30 second boot times, but before with 9.10 my boot time was around 60 seconds or so, and now it's around 5 minutes. So how can I fix this? Is there a way to post the boot log here? Where would it be located at on my computer?
Ubuntu :: Upgraded To 10.04.. How To Get The Default Theme
May 3, 2010I upgraded from 8.4 all the way through to 10.04. I want the default 10.04 theme and it's settings (the dark one). Cant find the actual one in my themes folder. Whats teh name of it, or is there a way to just choose default for all?
View 2 Replies View RelatedUbuntu :: 10.04 Installation Upgraded From 9.10 - Unable To Use?
May 11, 2010I have a 10.04 installation upgraded from 9.10 somewhere around the first beta.However, since a couple weeks I have the problem that I cannot use nano anymore.
Code:
mypc:~$ nano
Segmentation fault
I've tried to do apt-get remove nano then installed but stil the same,Even tried apt-get purge but with no avail.