I decided to upgrade from 10.04 to 10.10 and now upgrade manager is just sitting there saying "About 1 minute remaing" with "Setting up libapache-mod-php5 (5.3.3-1ubuntu9.1) ..." in the terminal.
There is not disk or processor activity.
I would like to upgrade from PHP 5.0.x to PHP5.2.13. My box is Suse 9.3.(Pleask 9.5.2).
View 2 Replies View RelatedI'd like to use PHP5.2x instead of PHP5.3x on my Ubuntu 10.04. There is a small bug in Drupal where tweaking Views causes an error which seems to be associated with php5.3.
So, how would I regress to using 5.2x on Ubuntu?
I finally gave in tonight and upgraded to 10.04. When it went to restart, it wouldn't boot back in. I got the error: Gave up waiting for root device. Common problems:
-Boot args (cat /proc/cmdline)
- Check rootdelay= (did the system wait long enough?)
- Check root= (did the system wait for the right device?)
- Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/disk/by-uuid/6cb7dd44-88ea-4345-a661-4bbd**** does not exist. Dropping to a shell! BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built in shell (ash) (initramfs) Ok, so when I was upgrading, I chose to "keep the existing version" of the boot file or something (forget the wording, but I get the impression it's the menu.lst). This may affect things. Ok, so I'm staring at the (initramfs) line on the screen. Where should I go from here? I'm working with a normal ubuntu desktop install on a toshiba netbook (worked just fine with 9.10).
I just upgraded to 10.04 Netbook Remix.When I boot, it gets past the splash screen and to the desktop. Before it can load anything, it acts as if it is looping. The wallpaper loads, the screen blinks white and then it loads the wallpaper again... then a white screen, then the wallpaper.I've tried to bring up the terminal and can't do that. I've also rebooted in recovery mode which didn't help.I'm at a loss. I'm on a windoze machine now since I can't get on my netbook.
View 1 Replies View RelatedIm not to sure where to post this, but i upgraded from Ubuntu 10.04 to Ubuntu 10.l0 and it gets stuck at the bootscreen, i followed the instructions on how to do a upgrade. Im not to sure whats caused it or how to solve it, and i dont really want to reinstall 10.04 as i forgot to backup my files
View 5 Replies View RelatedI was running 10.04 Netbook remix on my toshiba Nb305 in a dual boot with Windows 7 Pro 32bit on a 1.7ghz atom processor. I have grub 2 running and prior to the 10.10 upgrade i had run all the 10.04 updates. The 10.10 update appeared to have run smoothly and seems to boot ok but all it does is load my old background picture from before and none of my launcher bars or top status bar(sorry if these aren't proper ubuntu terms but the side netbook bar for app launching and standard top bar), mouse or keyboard.
I do know things are running in the back as my dropbox has shown that it is updated files in the back (also telling me wifi works and settings transfered). The only thing i can do is hit the computer's power off button and get the standard menu options in ubuntu for that but i have no control as i hve no mouse or keyboard control. Also note windows still launches fine from grub so that is not corrupted at all.
Upgrade from 10.04 to 10.10 has froze on restarting SQL server. Any idea what's going on because there hasn't been any error message yet?
View 1 Replies View RelatedSo I went and downloaded the latest NVIDIA driver, then followed a guide on how to install it. That seemed to go fine, and was back in full graphical mode. however, now it boots straight into the console and I can't seem to get out. I've tried restarting gdm as well, but no luck.
View 2 Replies View RelatedJust upgraded Fedora 14 to 15 using preupgrade in Virtualbox on Windows 7. Now it sticks on progress bar and fedora 15 label. How to see fedora boot log, login to rescue shell or whatever and find out what's wrong with it?
View 1 Replies View Relatedit has said "about 6 minutes remaining" for over an hour now at"installing upgrades", more specifically at "configuring gnome-power-manager"
touchpad and keyboard unresponsive ,should I worry? or just wait? also, the capslock indicator LED is blinking
computer is an HP Pavilion dv6500 from either 2007 or 2008 (don't remember)has an AMD Turion 64 x2 processor, but was always used as a 32 bit...and an nVidia N-Force Graphics card of unknown number.
Yesterday I upgraded from 9.10 to 10.04 via Update Manager. But when the upgrade procedure was finished and I made a reboot, I only come to the Ubuntu logo appears for a second, then the screen turns completely black and nothing happens. I then have to reboot via the power button.
But I can get it working with so far no problem, by booting to the third option in the boot options list. In the list there are several options, something like this code...
Now the question is; what does this mean when there are several alternatives with the same name? What is the difference between alternative 1 and 3, other than 3 is working and 1 is not? Is there any problem running alternative 3 instead of 1, and if so how do I get it to boot from alternative 3 as standard?
If this is not the right way to do it, how can I figure out what the error is on alternative 1?
I did a clean upgrade to lucid 10.04 from Karmic 9.10. After the installation, the boot was stuck at the purple screen with red and white dots.I did this on Dell XPS M1530 laptop and there was no problem in Karmic.
1. I found a temporary solution. After being stuck here, I simply go to tty1, login and startx. Now, I could work normally but if I go to tty1 and then to 'Ctrl-Alt-F7', I could still see the purple boot screen whereas 'Ctrl-Alt-F8' brings me to the normal GUI. How do I get rid of this purple boot screen ?
Searching on google suggested:
2. Remove 'quiet splash' and instead use 'nomodeset'. When I did this, I got the black screen with the messages during boot but it still got stuck. Importantly, there was no login prompt at tty1 or other ttys. Some messages towards the end where boot got stuck are below. Please help as I did like a fix to this.
System was running 9.10 just fine.
I *just* decided to upgrade to 10.04.1.
bad idea to mess w/ a working system.
Anyway my system won't go past the "ubuntu" splash screen with the five dots. The dots just keep scrolling from white to red over and over.
I can ssh into the box.
Top shows "plymouthd" is running, about 5% CPU and stuck.
I can't seem php5 work with apache2. I am getting the text openning instead of php. I think this is infamous problem, found many suggestions adding AddType application/x-httpd-php .php, did that in/etc/apache2/apache2. conf and /etc/apache2/httpd.confwith no luck, it's still opening text
View 6 Replies View RelatedOk so I have:
a)apt-get install apache2
b)apt-get install php5
c)placed a php test file into my var/www folder
d)go to 127.0.0.1 in my browser and all I see is a blank page, when I should see the php info page.
So what the heck is wrong here? I figure it's just something I'm too noob to know, yet I can't find anything about it on the net...
I have a ubuntu10.04 server 64bit, my application can under run under php5.2.x. So there anyway i can install the php5.2.x in ubutnu 10.04 without the need to source compile?
View 1 Replies View Relatedetc/php5/cli/php.ini and in the apache2 folder
View 1 Replies View RelatedI have just installed ubuntu Server with Apache2, PHP5, MySQL and PhpMyAdmin.
Everything works fine when I access the server on the LAN. I have forwarded port 80 in my router to the LAN ip of this server. (I have other windows based web servers so I am familiar with port forwarding) however when I try to access the server from the true static IP outside the LAN I cannot reach it and the connection just times out with the Ubuntu server connected if I use canyouseeme it says port 80 is closed. If I replace the Ubuntu server with another server I can reach this just fine from outside and canyouseeme says the port is open. So I am pretty darn sure the router is correct and that there is some config problem with the Ubuntu box, but I cannot find it. the ports.conf file has listen 80 in it and the apache2.conf includes the ports.conf file.
I have installed LAMP on ubuntu server 10.04. where can i find the installation folder...the extension folder and so on ? i tried the command locate php but it didnt return the path i wanted.
View 2 Replies View RelatedI already have php5 installed but when I try to install php5-curl to use magento I get this message,The following packages have unmet dependencies: php5-curl : Depends: php5-common (= 5.3.3-1ubuntu9) but 5.3.3-1ubuntu9.1 is to be installed E: Broken packages. Is there anyway around this? I'm using Ubuntu 10.10 desktop.
View 2 Replies View RelatedI'm doing some light web development, I installed php5 and apache on my laptop and read that when running apache your computer is technically a server and is thus vulnerable to computer wankery. I'm looking for advice on whether or not I should install a firewall or if I don't really need it. The work I'm doing is not a professional website, just a place for some experiments. All the info I found on the web was targeted to professional web-developers, not so much for amateurs like myself. What do you think?
View 6 Replies View RelatedWhen try to do a database query with php5 and mysql. I encounter this error:
Code:
Fatal error: Call to undefined function mysqli()
while phpinfo() says mysqli support is enabled? What's wrong in this picture?
i have installed php5.apt-get install php5 installed fine but when i got to a php program its looks for it in
line 90: /usr/bin/php: No such file or directory
whereis:
~# whereis php5
php5: /usr/bin/php5 /etc/php5 /usr/lib/php5 /usr/share/php5
iv added a symlink to bin as u can see above but thats no good as the php is looking for it in /usr/bin/php how can i get /usr/bin/php. drag php5 folder in there and rename it?
I used to run Apache + PHP5 + MySQL + ImageMagick locally, as a testing server for a project I'm working on. A while ago I updated a few things, with the php5-imagick library not matching dependency version numbers anymore. I decided to ignore it, since there was no update for the library. I have been without an internet connection in the meantime, but php5-imagick didn't work anymore at all. It didn't return any errors, but it simply didn't modify anything about the pictures anymore. A few minutes ago I decided to manually uninstall and reinstall the php5-imagick package.Uninstalling went fine. But when I wanted to reinstall it, the package was nowhere to be found! A quick Google search turned up no relevant results.
View 5 Replies View RelatedI can't run apache2 with php5. I follow instructions from here: SDB:Linux Apache MySQL PHP - openSUSE but seems stuck at Confirming apache2 works. It did not. I noticed that everytime I restart this 'error' will come out :
[Mon Apr 04 10:40:30 2011] [warn] module rewrite_module is already loaded, skipping
[Mon Apr 04 10:40:30 2011] [warn] module rewrite_module is already loaded, skipping
httpd2-prefork: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName Syntax OK Shutting down httpd2 (waiting for all children to terminate) done Starting httpd2 (prefork) [Mon Apr 04 10:40:32 2011] [warn] module rewrite_module is already loaded, skipping [Mon Apr 04 10:40:32 2011] [warn] module rewrite_module is already loaded, skipping httpd2-prefork: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName
Someone accidentally upgraded our PHP5 to 5.3.3. We've uninstalled it but what's the best way to install PHP5.2.14?
View 1 Replies View Relatedwant to upgrade php from 5.2 to 5.3 it can be possible with RPM and YUM but i want to know step by step how it can be upgraded using tar.gz file of PHP and from where i can download it.
View 1 Replies View Relatedmy server :
ubuntu jaunty 9.04 32bits
apache2 2.2.11-2ubuntu2.5
php5 5.2.6.dfsg.1-3ubuntu4.5
I have a problem uploading large files : from 0 to 1 048 576 000 octet (1000mega) : OK greater... KO... i mean even no file uploading temporaly in /tmp I have tried using "jyraphe" or "openupload" in the server part and from mozilla or IE in the client part.... always the same thing...
php.ini :
post_max_size = 5G
upload_max_filesize = 5G
I even set "LimitRequestBody 10000000000" in /etc/apache2/sites-available/default thinking the default value (not set OR 0) didnt work but...
I'm trying to run apache2 with mod_ssl and php support and I need curl too. When php5-curl is installed apache doesn't work with ssl and I've got this one in error.log:
Code:
[Thu Jun 03 10:00:39 2010] [notice] child pid 26013 exit signal Segmentation fault (11)
[Thu Jun 03 10:00:39 2010] [notice] child pid 26014 exit signal Segmentation fault (11)
It's strange because it works well without ssl. The problem occures only when I'm trying to access and SSl page, doesn't matter if it's a html page or php file. I'm using Ubuntu 10.06 Desktop version which is x64. Below are the packages which I've got installed related to apache php and curl. I successfully compiled php5 from source, but the problem still exists so probably it's somewhere in apache?
