Ubuntu :: Unknown Package Error On Fresh Install
Sep 4, 2010
Just did a clean install on my desktop of 10.04. Net was working fine, until I installed GIMP and restarted. A little "NO" symbol pops up next to my wireless indicator, and it tells me to either do an apt-get check from terminal or start the package manager to find out what the problem is...so, I do the apt-get check.
Here's what I get returned from the terminal:
E: Unable to write to /var/cache/apt/
E: The package lists or status file could not be parsed or opened.
View 9 Replies
ADVERTISEMENT
May 14, 2010
I am trying to write notes for my Spanish class using LaTeX, but having loaded the spanish - babel package, am getting the following error - firdt I give an example code, then the .log file:
Code:
listfiles
documentclass{article}
usepackage[spanish]{babel}
[code]....
View 8 Replies
View Related
Jan 13, 2011
I just completed a fresh installation of Ubuntu 10.10 Desktop 64bit. Everything was pretty much left to defaults. When completed I enabled the partner repositories. Then ran apt-get update and apt-get upgrade. Everything ran perfectly. When I attempted to install db2exc it failed saying it was an unknown package. I ran apt-cache search db2, but nothing came up. Was IBM DB2 Express-C package moved to a different repository or was it removed completely? Maybe a rename? I know I'm not on the up and up about this, but after doing a google search I thought I'd see something. To make sure I haven't lost my mind entirely, I installed Lucid on a test box, fresh installation, and was fully able to do the installation of db2exc.
View 2 Replies
View Related
Nov 26, 2010
I've been having issues with the omega.cert on Pidgin and tried to upgrade to 2.7.7 today. I clicked on the link from the Pidgin site to download the ppa package "pidgin-ppa_0.0.3_all.deb" and tried to open with GDebi Package Installer but it tells me it couldn't be opened because an unknown error occurred.
View 5 Replies
View Related
Oct 20, 2010
This is my first linux install, Fresh install of Ubuntu 10.10, and first thing I do is update. I can't update because I get this message "The package System is broken Check if you are using third party repositories. If so disable them, since they are a common source of problems.
Furthermore run the following command in a Terminal: apt-get install -f"
This a brand new fresh install, how can there be problems already!?
In terminal I've tried " apt-get install -f" and get "E: Could not open lock file /var/lib/dpkg/lock - open (13: Permission denied) E: Unable to lock the administration directory (/var/lib/dpkg/), are you root?"
View 3 Replies
View Related
May 15, 2011
Sometimes httpd (the apache web server) fails to start and displays an error (98: Address already in use: make_sock: could not bind to address xxx.xxx.xxx.xxx:80). This happens even when no other service is listening on port 80, as evident from the output of "lsof -i :80" and "netstat -A inet -lnp". This is due to a configuration file mixup. Both /etc/httpd/conf/httpd.conf and /etc/httpd/conf.d/system-config-httpd.conf contain the directive "Listen :80". If you comment out the "Listen 80" in /etc/httpd/conf.d/system-config-httpd.conf, httpd will again start.
View 1 Replies
View Related
Jan 27, 2010
I have an odd problem. I custom-built a workstation:
MSI Speedster 1 mobo
2x Opteron 2352
4x DDR2 ECC 4GB
3x 150GB WD Raptor, hardware RAID 0
1x 2TB WD Green, standalone
I had Linux Mint 8 installed, but before putting the machine to real use decided to toss Windows 7 on there to see how it worked. Now I am attempting to put Mint 8 back on to get everything set up. There have been no hardware changes since I had Mint installed before.
I can successfully install, but when I reboot I get a Grub error 17. The partition table looks like:
50GB / ext4
400GB /home ext4
...
2TB /backup /ext3
Grub is installed to (hd0), which is the 450GB hardware RAID. It does not make a difference when I run the installation (and then reboot) with the 2TB drive disconnected. Thinking maybe the new ext4 format was messing with Grub, I tried:
200MB /boot ext2
50GB / ext4
400GB /home ext4
And installed again and rebooted. No dice. I'd guess Grub has issues recognizing the hardware raid, except it worked before
View 1 Replies
View Related
Jan 27, 2010
I have a dual boot machine (Win XP + Ubuntu 9.10 on separate physical drives) which was working fine. I now want to replace the Ubuntu 9.10 with LinuxMCE which is based on Ubuntu 8.10. Using the LinuxMCE install disk, I did a fresh install of Ubuntu 8.10 over the top of Ubuntu 9.10 (repartitioning the whole drive). On reboot, I now get a Grub "no such disk" error. I have run the boot info script which produced the following RESULT.txt:
Code:
Boot Info Summary:
=> Grub 2 is installed in the MBR of /dev/sda and looks for
(UUID=6a59ab9e-041f-41e2-b27c-02b8ada4c1af)/boot/grub.
=> Grub 0.97 is installed in the MBR of /dev/sdb and looks on the same drive
in partition #1 for /boot/grub/stage2 and /boot/grub/menu.lst.
=> Windows is installed in the MBR of /dev/sdc
[Code]....
View 5 Replies
View Related
Apr 20, 2010
After installing ncl 2 sp2, I restarted my computer. Now when I try to login I am getting the following error:Module is unknown. I am running openSuse 11.2 64-bit.
View 2 Replies
View Related
Jan 6, 2011
I have installed Suse 11.3 on my computer yesterday but since then I have been trying to update it but unable to do so. Everytime I try I get this error message: "system management is locked by the application with pid 6953 (usr/sbin/packagekitd). close this appliaction before trying again."
View 8 Replies
View Related
Oct 19, 2009
I have just done a reinstall of Centos 5.3 on a dedicated server (via a KVM). My partition arrangement was the default presented to me by the installer:
As you can see, I'm using LVM for everything other than /boot (I need to use LVM for an app I am testing).
On reboot, I get the following:
[QUOTE]
It looks like it can't find vmlinuz-2.6.18-128.el5 in /boot.
I have rebooted using the Centos Install Disk 1 and gone in to rescue mode. Rescue mode mounted my / under /mnt/sysimage, from there I could see that /boot had been mounted from /dev/sda1 as it should be.
However, there was no initrd.image or /vmlinuz-2.6.18-128.el5 under /boot or /boot/grub. Shouldn't the CentOS installer have created these?
Is there anyway I can recover this installation?
View 1 Replies
View Related
Jul 21, 2011
I have installed Centos 5.6 on a fresh VPS. After install I ran yum update command. After update was finished I noticed a message saying "Your system kernel may have been updated. Current kernel (2.6.18-238.e15) has been changed to : 2.6.18-238.12.1.e15)". When I reboot, I see two boot option in GRUB. one is Centos 5.6 (2.6.18-238.12.1.e15) Default and other is Centos 5.6 (2.6.18-238.e15). When Centos boots from default, it fails with fatal error. But when I boot with other option, the system boots as normal.
I need to know how to resolve this situation. Why yum update results in Kernel update and 2nd option in GRUB boot loader. and why Centos refuses to boot with update Kernel.
View 10 Replies
View Related
Oct 14, 2010
I'm trying to install 10.10 64bit on a DFI X48 mainboard with 8Gb RAM, I've tried installing from the Desktop CD, Alternate CD and USB stick, but all attempts fail with
uncompression error
-- System halted
I've run memtest86 and the RAM passes OK, I've even tried running the install with just 4Gb RAM but without any luck. I've even tried three different CD/DVD drives.10.04 64bit runs from the Live CD without any problems, but 10.10 isn't playing ball...
View 1 Replies
View Related
Jun 29, 2011
I have just fresh installed Fedora 15 over my (very) old copy of Fedora 11. I wanted to play around with Linux.
Anyway, when I log in, I get the "Oh no! Something has gone wrong" (like I stated).
View 3 Replies
View Related
Mar 1, 2010
After a fresh install of Debian I came across an error Im hoping you guys can help me with. Ive searched for the error and it appears there are multiple reasons that could be causing it. To compound the problem, Im at work so I dont have the specific error messages....so I just installed Lenny (standard install, no desktop) using a USB installer and everything went very smooth. On first boot, the system paused while waiting for the root file system. After a minute or two it just errored out complaining it could not find the root file system and put me at a (vmlinuz) prompt?My guess is that I need to go into my bios and change my boot priority.. but again, thats just a guess.
View 1 Replies
View Related
Jul 25, 2014
I am currently trying out Debian in VMware Player and I installed it using the following method.
Image Used: Debian-7.6.0-amd64-netinst
In the check list where it lets you select Debian Desktop, Print Server, and System Utilities I think it was? I deselected everything.
After Debian installed and rebooted I logged in, elevated myself to su, and entered the following commands.
apt-get update
apt-get install kdm kde-plasma-desktop --no-install-recommends
reboot
startkde
and I get the error '$DISPLAY is not set or cannot connect to the X server.'
View 8 Replies
View Related
Nov 28, 2015
I just installed debian from debian-live-8.2.0-amd64-standard+nonfree.iso and after installation, which finished without problems, I cannot boot the system. I get the error:
Code: Select allfile '/boot/grub/i386-pc/normal.mod not found
From grub-rescue via ls command I see that I don't have the i386-pc folder inside /boot/grub. I have only two files:
unicode.pf2 and grub.cfg
View 7 Replies
View Related
Feb 21, 2010
Formated new drive with ext3 on external drive on Suse 11.1 When upgraded to 11.2, drive was not connected... Could not get mounted after that... Set up another boot drive, could not get to mount. Found post with following:
>cryptsetup luksOpen /dev/sde1 restore
>mkdir /restore
>mount /dev/sde1 /restore
Error as follows: mount: unknown filesystem type 'crypto_LUKS' Have also got to another point where superblock was incorrect. I can use terminal, but am not a linux guru... Have looked at other posts under luks, but can not find a solution.
View 6 Replies
View Related
Jan 11, 2011
It started when I wanted to dual boot Windows 7 and Opensuse off of my netbook (No DVD/CD drive) I tried install suse from an external hard drive and I botched it. I ended up erasing EVERYTHING off of my internal netbook hard drive. Windows and all.
Well, I had a couple of other computers so I studied up and eventually successfully installed OpenSUSE 11.2 on my external hard drive (11.3 being the one that I accidentally erased everything with, so kinda scared of it) and now I want to install openSUSE 11.2 on my internal netbook hard drive.
I can not use disks
I can not use a flash drive (For some reason, even if I make it bootable, it will not load up, this could be because it's actually a 8GB microSD card that is placed in a USB card reader.)
I can not use an external hard drive because that's what I'm running suse off of.
I've tried reading up on how to install suse on another drive off of the hard drive and I've gotten as far as whenever I boot up the netbook with the suse external hard drive connected it will ask to boot into OpenSUSE, the Fail Safe, or to install OpenSuse. When I select to install it it gives me the Error 18 Unknown File system.
I've tried formatting the internal hard drive twice. One as NTFS and again as EXT4. Neither seems to effect it other than when it's ext4 I can open it and it contains a Lost and Found folder.
When I interrupt the boot sequence by pressing c and going to the terminal and I use the root (hd +TAB command it tells me I have a hd0 and a hd1. The hd1 only has 1 partition which is ext4, which I'm assuming hd1 is the internal hard drive (I'm not sure how to check) and the hd0 is the external hard drive, which has three partitions. One with an unknown file system and two with ext4. When I try to enter the set up from the terminal it gives me the same error for any thing I put it (e.g. root (hd0,0) gives the same error as root (hd0,1), or root (hd0,2) and root (hd1,0)
Something like it cannot locate these two files I'm assuming it needs to boot. If anyone finds this relevant I'll retry it and post the files its missing.
I've been searching for awhile and can't find any threads that can solve my problem. From other threads, however, I have noticed that I should probably include my menu.lst, listed below
Code:
I have also ran the boot info script and received the RESULTS.txt file it generates. Listed below
Code:
View 9 Replies
View Related
May 11, 2011
error: unknown filesystem grub rescue>
Background: My mother's HP laptop had Ubuntu and Vista on it, Ubuntu my brother's doing. He decided he wanted to take off Ubuntu yesterday (he had forgotten the password), and deleted the partition that it was contained within. The computer now boots to this error.
Inventory: We no longer have the install disk for Windows Vista, he cannot tell me what version he used of Ubuntu, what partition it was on, any of the specs for the machine, or generally any information about the system. All I am aware of is that error on the boot-up screen. I have nothing else to work with.
I would like to remove Grub, and Ubuntu, and leave Windows intact (the request of the owner of the computer), but I have no idea what commands I could use to get rid of either when I can't access Windows, or how to properly remove them if I did access Windows.
View 10 Replies
View Related
Jun 24, 2010
what now trying to mount partition get this error this is the partition ubuntu 9.10 is installed on and upon reboot error no device with a long string. mount: can't find /dev/sda6/mnt in /etc/fstab or /etc/mtab
so now that I believe I've successfully mounted the partition how do I direct the bootloader to this partition /dev/sda6 on /media/11076e45-e27d-470b-bb6d-6894f7809a0c type ext4 (rw,nosuid,nodev,uhelper=devkit)
View 1 Replies
View Related
Apr 26, 2011
I have installed Ubuntu 10.04 LTS server 32 Bit. Now have to install FTP package in my sever i dont have internet connection but i have downloaded the vsftpd_2.0.4-0ubuntu4.1_i386.deb file but while installing i get the following error.
# dpkg -i vsftpd_2.0.4-0ubuntu4.1_i386.deb
(Reading database ... 42228 files and directories currently installed.)
Unpacking vsftpd (from vsftpd_2.0.4-0ubuntu4.1_i386.deb) ...
dpkg: error processing vsftpd_2.0.4-0ubuntu4.1_i386.deb (--install):
[Code]....
View 9 Replies
View Related
Oct 4, 2010
Whenever I try to change a user full name, through System / Administration / Users and Groups, I get the following error: The configuration could not be saved - An unknown error occurred. Running Ubuntu 10.04.1 LTS 64 bit, freshly installed.
View 2 Replies
View Related
Nov 28, 2010
Whenever I try to run the software centre or synaptic package manager, all the other programs that are currently running hang(reminiscent of the Vista days) and even if I try to install a package using terminal an error message "Bus dependency error" is displayed.
View 2 Replies
View Related
Aug 6, 2011
I always get these:
-Reading package lists... Error!
- when trying to install through Terminal.
And my Software Center doesnt work.
View 1 Replies
View Related
Jul 26, 2011
I am try to install a package using yum,i got the following error:
I am using centos 5.5
View 7 Replies
View Related
Jul 9, 2010
System os: CentOS 5.2 32 bitI installed squid and it is proxy server.Later, i install sarg to monitor web log of client...But when i install from rpm package, it show errorQuote: #rpm -ivh sarg-2.2.3-1.el5.rf.i386.rpm error: sarg-2.2.3-1.el5.rf.i386.rpm:pmReadSignature failed: region trailer: BAD, tag 15872 type 2047 offset 28672 count 4238 error: sarg-2.2.3-1.el5.rf.i386.rpm cannot be installed
View 7 Replies
View Related
Mar 18, 2011
i first noticed when i tried to get mono via sudo apt-get install mono i got the error
[Code]...
E: Package 'mono' has no installation candidate then i tried to get it through the software center and i noticed the software center wasn't opening.... so i tried searching to find if someone else had the proroblem, they did, one solution was to reinstall python but if i open syapitic software i get the error
[Code]...
View 6 Replies
View Related
Mar 16, 2010
Is the ubuntu keyserver broken? I am trying to install a package and every time I try to install the key I get a time out error.
apt-update give me
Code:
W: GPG error: [URL karmic Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 932062C9CD30EE56
Then if I try to install the key I get this?
Code:
sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys CD30EE56
Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /etc/apt/secring.gpg --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --keyserver keyserver.ubuntu.com --recv-keys CD30EE56
gpg: requesting key CD30EE56 from hkp server keyserver.ubuntu.com
gpg: keyserver timed out
gpg: keyserver receive failed: keyserver error
Can I tell ubuntu not to bother with the key. I know the package is good and safe to install. I should be the one to judge if its ok to install not ubuntu.
View 1 Replies
View Related
Mar 17, 2010
tl;dr - sudo make -> operation not permitted, sudo chown -R 777
* -> operation not permitted on some of the files
I am trying to install a library. Sudo make is getting permission denied on file 1, while using regular make I am getting permission denied on file 2. I have noticed some of the directories in the library are under nobody:nogroup. I tried chown and sudo chown, both didn't work. Sudo chown got permission errors, while chown didn't change ALL the files. (operation not permitted once again) Tried sudo su, and working from there, that also did not work. (permission once again). Using lsattr returned "lsattr: Inappropriate ioctl for device While reading flags on".
Code:
sudo chmod -R 777 *
chmod: changing permissions of `Makefile': Operation not permitted
chmod: changing permissions of `Makefile.am': Operation not permitted
chmod: changing permissions of `Makefile.in': Operation not permitted
chmod: changing permissions of `queue.c': Operation not permitted
chmod: changing permissions of `queue.h': Operation not permitted
chmod: changing permissions of `ucutil.h': Operation not permitted
Note the .libs folder not having write permission....
Code:
chmod -R 777 *
constantin@Nadfadfo:~/network_home/constantin/libraries/unicap/libunicap-0.9.8/common$ ls -la
total 68
drwxrwxrwx 4 constantin constantin 4096 2010-03-17 11:31 .
drwxrwxrwx 8 constantin constantin 4096 2010-03-17 11:31 ..
drwxrwxrwx 2 constantin constantin 4096 2010-03-17 11:31 .deps
drwxr-xr-x 2 nobody nogroup 4096 2010-03-17 11:31 .libs
-rwxrwxrwx 1 constantin constantin 15295 2010-03-17 11:31 Makefile
-rwxrwxrwx 1 constantin constantin 130 2010-01-17 08:17 Makefile.am
-rwxrwxrwx 1 constantin constantin 15262 2010-01-17 08:17 Makefile.in
-rwxrwxrwx 1 constantin constantin 6101 2010-01-17 02:49 queue.c
-rwxrwxrwx 1 constantin constantin 1667 2010-01-17 02:49 queue.h
-rwxrwxrwx 1 constantin constantin 125 2010-01-17 02:49 ucutil.h
System: Karmic Koala 64-bit
View 1 Replies
View Related
