I just upgraded to 11.04 today, and was playing around with the compiz-fusion settings. The first thing I checked was the fade to desktop box, and that froze up my computer. I let it sit for a little bit, but eventually got bored and just turned off my computer via the power button. When I started it up, both the tool bar on top and the launcher on the side had disappeared, and I don't have a clue how to get them back.
View 4 RepliesI just upgraded to unity and everything is fine. Then I accidentally enabled Desktop Cube and Cube Rotation. Suddenly, the top part of windows that you normally use to drag the window or close it etc. started disappearing. In a panic, I rebooted. Upon reboot I found myself in an even bigger mess than I could have imagined. Not only did this fail to fix the problem previously mentioned, it also caused the sidebar and the ubuntu bar at the top to disappear. Desktop icons still show, and my cursor is fully functional, but other than that, my system is unusable.
View 5 Replies View RelatedI have to say that I don't mind Unity all that much! Certainly not as much as I had expected to, given what I had been reading before the upgrade from Maverick. I'd like to go on playing around with it. However, I would also like to continue to be able to use Gnome 2 sometimes, with Compiz and Emerald, as I have done in the past.
The trouble is that whenever I log into the "Ubuntu classic" desktop, it loads compiz, complete with the Unity plugin. Then I have to disable the Unity plugin manually every time, and do the same (with no panel) whenever I log into Unity.
Is there a way I can configure it to only load the Unity plugin in the Unity desktop, but not in the Gnome 2 desktop?
The unity sidebar is supposed to dodge windows according to the default, and according to the settings in the unity prefs in compiz. This is not the case, as can be seen in this screenshot. Any idea what this could be caused by? It's sporadic when it shows up, but when it happens it does it until I reboot.
View 4 Replies View RelatedWhen logging in, I suddenly got a message saying "It appears you do not have the hardware to run Unity", and it initialized the old GNOME 2 desktop.
Ofcourse I have the hardware to run Unity (an NVIDIA GTX 580), and it has worked normally until now...
Now Unity won't come back, even after logging out / in or rebooting. The video driver works normally and NVIDIA X Server Settings does not show that there's anything wrong with my video card or drivers.
Is this a bug? Did this happen to anyone else? How do I get the Unity desktop back?
My unity toolbar has disappeared. The old style ubuntu panels have appeared in its place. This was happening on occasion before, but restarting the computer would get rid of it. This time unity has been gone for about a week, through many reboots, driver re-installations, etc.I just installed a new graphics card, which is working fine on the windows partition. Unity would fail to load on occasion with the old card, too. I know the new card works with Ubuntu, because Unity was working fine with it for about a week.
I'm running Ubuntu 11.04. The old card was a GeForce 7900 GT, the new one is a low-profile Sparkle GeForce 8400 GS.
I want to use Unity (Ubuntu 11.04). It's not anymore in the list of sessions at the login page.
I've tried to run 'unity' from the command line like was suggested in another post resulting in failure (see below).
In the Ubuntu Software it's installed. code...
I originally had the nvidia driver form the nvidia website installed instead of the = one from the repository. I uninstalled it and used apt-get to install nvidia-current. My video works fine but when ever I click the applications button all of my installed software is gone under all applications. I can still access my programs it's just under all applications nothing shows up, this is annoying. Is their any way to fix it or should I just switch back the driver?
View 8 Replies View RelatedI find that when I use Amarok my Unity side bar gets jammed in position, and won't hide away. This is really irritating as the play button is under the bar so I can't click it! The side bar is stuck in position whether Amarok is maximised, in a window or minimised, or even if I close Amarok and just leave it playing (Amarok isn't even listed on the Unity bar in this case). The only way to make the side bar vanish is to completely quit Amarok. Is there anything I can do to force the bar to hide?
View 1 Replies View RelatedI am running 10.10 Netbook Edition. I added Terminal Server Client to the Unity Menu and I typically run it in Full Screen mode to manage serveral windows based servers. The problem is that TSC displays perfect in full screen (unity tool bar hidden) but when i move the mouse over to the left side of the screen i get the pop-up text balloons from the unity below it. I cannot click on any items along the left edge of the remote desktop window including the windows start key. I want to confirm if this is a bug? and how to report it if so.
View 1 Replies View Relatedafter a lot of testing and tweaking done in natty 64 bit while running as live usb, i decided to install it clean on my laptop. everything is working fine (courtesy the time i spent to get things work in live usb)
i installed gnome shell too and now have an option of unity / gnome shell and classic.
today being the 2nd day, i got the following problems.
a) the global menu that was being displayed in unity is not working. its funny to note that firefox global menu is working but not for nautilus or any other apps.
b) conky is displayed in unity and classic desktop but not in gnome-shell. i also followed this link to get it working in start up = > [URL]
still not working. when i issue the top command, i can see that conky is listed in the processes but not displayed..
I've just noticed this morning that the number shortcuts that normally appear when holding the super key to show the Unity launcher are not there. The s, a and f shortcuts remain however. Also, just pushing the numbers that should be there doesn't do anything.
I've just upgraded from Maverick to Natty and things were mostly working fine until this. I'm not sure what changes have happened between now and then and I don't remember any major changes in that period.
I just tried to take a screenshot and opened GIMP to save it and I checked again and they have reappeared. So, I guess the new question is why did this happen? How can I solve this problem if it happens in the future? Should I mark this as solved? I don't really understand what happened either way.
I have two (or more) video files that I want to play side by side. I could do that simply by opening them in two seperate windows, but that would also seperate all the controls (play/pause/forward/...). I want to play them in a synchronized fashion so that pause/forwarding/... works on both videos simultaneously so that they always stay at the same timecode and they don't go out of sync. How would I accomplish that in Linux?
This is needed for viewing only, so compositing them into a new video file first should be avoided if possible, but if there isn't an easy way to do that, I welcome answers doing it with composition as well.
Will I be able to have a partition on my computer to run Windows Vista and Ubuntu side-by-side?
View 2 Replies View RelatedIf a file gets created in the user's Desktop folder, or if a drive is added to the machine and a Desktop icon is correspondingly created, they will by default appear on the left side of the desktop (unless, in the case of the latter, the specific drive has been created before and dragged to the right side, in which case GNOME will remember to put it in the same place).
Because I have a terminal window embedded onto my Desktop in the top left corner and occupying most of the screen), I keep my icons on the right side of the Desktop instead of the left (Mac style) - Any time I add a new drive or a file is sent to the Desktop, however, I have to kill the terminal window to be able to click on the icon, then drag it back to the right side, then restart the terminal.
Is there any way to tweak GNOME so that these icons are added from the top right corner and down instead of from the top left, automatically?
have been trying to setup a dual boot system with ubuntu and XP running side by side on my Thinkpad T41.tried it a few times and always causes the same problem. i have 40 gig HDD, on which i create a 13 gig NTFS partition and leave the rest as free space. then install XP on the NTFS partition. no problems.
then i boot from the ubuntu disk (9.10 Karmic) and install using the "use free space" option at the partition section. ubuntu installs ok, and boots fine from GRUB 2.0. BUT when i select the XP option from GRUB's list, it starts to boot XP, i get the standard XP loading screen for three seconds and then it crashes to a blue screen critical problem, and restarts the system. when i then boot from the xp cd and go into recovery mode CHKDSK will not recognise the disk, and DISKPART shows one HDD at 35 gig which it cannot access.
this means i cant run FIXBOOT and get my xp install running again. every time i do this process it produces the same problem. tried at first with xp installed on whole HDD, and reducing the xp partition size. killed XP. then tried ubuntu first and xp second - but this caused the same inaccessible disk problem - xp would not recognise the partitions and would not install. so i slipstreamed my XP install disk to SP2 hoping this would make it recognise the partitions, but no luck there. so had to format all and repartition the 13 gig NTFS for xp. installed xp again without difficulty but ubuntu install killed my xp in the same way.
How could I see stereoscopic side by side picture film using smplayer with vdpau on normal LED monitor?
View 1 Replies View Relatedwhere I can get a application to view spreadsheet files side by side to see differences or sync ?
View 3 Replies View RelatedI'm looking for a software to compare two documents (for example .odt) side by side or highlighted in graphical way. I want to do the same as Word 2010 Compare Documents (see this: Microsoft Word 2010: View Two Documents Side By Side). I found in OpenOffice something a bit similar that, see in <Edit> -->> <Compare documents>, but it's not a good visual presentation. I'm looking for a software who give me the possibility to see the differences between two documents side by side, or highlighted.
View 3 Replies View RelatedI'm wondering how much of my currently installed packages I can transfer to a new system...I have a HDD split in two. I have 10.4 on one half (/dev/sda6) - my working system for the last year or so since my last upgrade - and I have just installed 11.04 on the other half (/dev/sda. I wanted to check out the new version rather than upgrading. note I have my home folder and all stored data on other drives (zfs mirrored disks) - the boot disk is mostly OS related... I can overwrite /dev/sda8 with impunity as long as /dev/sda6 is intact....
What I want to do is capture the wide variety of packages I have installed on the old version and install them onto the new system - without using the dist-upgrade mechanism... I've had it fail too many times leaving me with a complete rebuild being required... is this (partially) possible or have too many core packages changed? I was especially thinking of something like [URL]
to obtain the list:
dpkg --get-selections | awk �$2 ~ /^install$/ {print $1}� > installedpackages
to reinstall:
cat installedpackages | xargs sudo aptitude install -y
another path would be to clone the entire /dev/sda6 onto /dev/sda8, boot into the duplicate and dist-upgrade that
I did a search but for this topic and I thought it would be discussed quite a bit, did not get any results. Maybe I did not use the correct words? Anyhow, I am running Kubuntu 9.04 and wish to switch to Ubuntu Karmic 9.10. I do still want to keep Kubuntu 9.04 as a boot up option temporarily in case I have major issues with Ubuntu. Ill also need to know how to get rid of Kubuntu after Im sure all is well with Ubuntu. Finally, there are a ton of boot options (different kernels Ive upgraded to) in Grub when Kubuntu boots up. How do I get rid of those? I also have a Windows XP partition that I boot into occasionally.
View 4 Replies View RelatedJust installed Ubuntu 10.04 on my home laptop after testing it (and loving it) on my work desktop just this morning. First time Ubuntu user and looking to be a long one, too.Anyways, I used the "install side-by-side" on both machines, but my laptop, with Vista, has a weird side effect. At the boot screen, I chose Windows Vista and it booted the recovery tool (I forgot the exact name). I was worried at first, but when I chose the actual Windows Recovery option below it to attempt to fix it, it booted Vista. So it seems in the process of partitioning the HDD for Ubuntu I somehow switched what each partition boots. Is there a way to correct this?
View 4 Replies View RelatedI would like to know how I can view two windows side by side on the same desktop (ex. have two openoffice files side by side) and be able to work on both of them at the same time rather than having to click back and forth from window to window. I have seen this done on people that have MAC computers is there anyway to do this on Ubuntu?
View 8 Replies View RelatedHow would I use a unix grep regular expression to find any two capital letters side by side and how would I find an expected comma in an expected spot?
View 2 Replies View RelatedI'm using NFS and I have the following problem. After ~100 days, the client and server lose connection, but the client doesn't know about this, it gives no error. The problem is that the changes on the server side aren't visible on the client side.
The nfs options are: "noatime, nolock, hard, udp, notcp, nosuid, nodev, rsize=8192, wsize=8192, actimeo=60"
The kernel version is: 2.6.16.27 built with 250 Hz. Is this an already corrected issue in a kernel version? Or are my options wrong?
I have installed Ubuntu 10.10 on my computer. And now for some reasons I need to install Windows 7 side by side with it. I tried it before and ended up loosing my Ubuntu partition. I wanna keep Ubuntu as my main operating system.
View 7 Replies View RelatedI am running Lucid, but i want to test Debian OS, but i don't want to run in VM, therefore i had decided to install Debian side-by-side to Ubuntu.Debian also uses Grub-2..? i am asking this because once i install it, i don't want to lose my Ubuntu, therefore i need Advice before install it,.
View 4 Replies View RelatedIt used to be a sysadmin/yast setting wherein you configured the display.It is now done under "personal settings"-->"display" meaning ordinary users can set their own preferences. That's really nice and all, but I'd rather it be sysadmin-only than have to go through several minutes of futzing around with it every blasted time I login. So, how can I make side-by-side permanent either for myself or for all the people who use my system (just me)? Thank you.
This module is only for configuring systems with a single desktop spread across multiple monitors. You do not appear to have this configuration.Since I obviously do and since I can get the desktops to spread across the monitors (after futzing for several minutes).
I am having a text file as below ;
line 1 : 123 rama 21
line 2 : dropped INDIA Remarks
i want out put as below :
line 1 line 2 ie
123 rama 21 dropped INDIA Remarks ( in one line)
which command i can use ?
The 2.6.37 kernel has proved disappointing for me on one lap top at least. The KMS disregards any boot-up parameters and bringing X on seems to be a big struggle for the lap top. The logon screen for run level 3 appears for several seconds before the lap top starts up the GUI logon. Worst of all, applications seem to take twice as long as they used to to get started.
No doubt there are some tweeks I could do but the main problem seems to be that the lap top is not powerful enough to cope with the KMS. I am even considering downgrading back to Slackware 13.1 (which this laptop had no trouble coping with).
Before doing this I thought I would try the 2.6.38.4 kernel and see if this overcame any problems. An initial trial looked promising but evidently there is more to using a new kernel than unpacking the huge 2.6.38 kernel and re-running lilo. I was unable to get past the login screen because many of the 2.6.38 directories don't exist.
Can I set up a laptop so that I can choose which kernel I want to use at boot-up time or do I have to make a total commitment with one kernel only?