I am running ubuntu-9 on i686 and cross compiled simple hello.c program with arm-linux-gcc (handheld/arm-linux-gcc-3.3.2.tar.bz2]) for arm , but unable to run it on openmoko neo free runner phone.
View 1 RepliesI've trying to run openmoko thru qemu, i went thru the tutorial given at openmoko home page and did install and other things as given there and when i start the qemu, the emulator brings up a GUI which shows "openmoko" logo and then asks to select 1 out of 4 option[the options are like boot-up, enable some usb devices ,one more i dont remember the name, boot off] when i select boot-up i shows a new console and that shows some 4/5 lines os something[it just vanishes in less than a sec and show something like "checksum " blah blah blah] and then it again goes back to the same startup page and displays those 4 boot options. i tried the other options too but it never worked, not able to come up with any coclusion why this occurs. Has anyone faced this kind of problem ? Please help me out fix this problem as google dint help much. BTW i'm running Fedora9 2.6.26 kernel and qemu-0.9.1-6.fc9.
View 2 Replies View RelatedI'm trying to test whether wget is working still or not. While [ wget is still running ] <----- but how should this look please?
do
codes
done
My aim is to test on my computer some .jar games for cell phone before installing them on my Samsung GT-S5230. Unfortunately, the result of the following commands is not so happy:
Code:
java -jar ./The-Crow.jar
Failed to load Main-Class manifest attribute from
./The-Crow.jar
Code:
manolo@manolo-laptop:/media/DV/GIOCHI$ jarwrapper ./WSC20093D.jar
[Code]...
It is not detected, not even as a file tree (let alone the stupid outlook stuff that doe not get me my addresses).
is there out there some program to connect this phone?
Have Ubuntu & it was working well, but has become slow, 'greys out' on me regularly - eg. pic loses colour & nothing will respond for a few or more seconds. Also 'Ubuntu Software Centre' & "Synaptic' thingy come up with errors, saying can't install or uninstall progs. Although it seems they may do it OK despite saying they can't. Have Computer Janitor installed, but this is no longer working at all. So... is there a program or such that I can use to test/clean out the system?? For that matter, is there a program for testing hardware, as I'm not sure if it's an indication of unhealthy hard drive or such?
View 1 Replies View RelatedI'm in doubt whether my dvd burner is working properly. Do you know of a free of charge program to test it fully?
View 2 Replies View RelatedI wrote a test program to get the CPU utilisation. I hope to extend it to take cpu utilisation on multi core machines. Hear I used the equation for taking cpu utilisation given at [url] of JmSchanck post. But when I match the output of my program against 'top' and 'system monitor' output it seems quite high. Sometimes cpu utilisation goes more than 100%.
So the given equation in that url is correct? can anyone give me the equation to take CPU utilisation?
Code:
Basically, it is a Bluetooth scanner that is designed to do just one thing, scan for discoverable devices in range and record their MAC, name, and the time/date they were found to a log file. There are only a few options, it is pretty much a set it and forget it sort of thing. The only requirements are BlueZ (3.x or 4.x), and that your computer has a Bluetooth device that is supported by Linux.
Obviously you will also need at least one device to scan for, and the more the better. If you want to take a walk through your mall while running it and seeing what you found, I would be ecstatic. A word of warning, I am not a very good C programmer and I have no doubt that there are mistakes in the code and improvements that could be made. You can download the source and get a little more specific information about it from: [URL].
I started to run a C++ my program in Linux and I don't know how to test my program that works fine with a text file. This is a project for my uni and to explain more clear, My program is a sample database for modify or add and search and it read data from a binary file and also write into a binary file. I have got an input from my lecture and she said after compiling in Linux I must write:
1-to compile:
Code:
g++ (files with cpp)
2-to see the output:
Code:
./a.out
3-to test with input:
Code:
./a.out < input.txt >
My problem is in step three. What I must write in the command part after" step2" to see the output?
if anyone here could recommend a cellphone. My main requirement is that it should tether as a 3.5g modem via USB to a PC running Fedora 13. I have previously used a Nokia to good effect, but their standpoint on privacy is making me look for a different brand.
View 11 Replies View RelatedI haven't used my XP partition for two years, but recently found that I could not program my phone using VirtualBox or Wine. So I tried booting to XP but it just comes up with a flashing cursor. update-grub2 and it sees the part, but same problem.
[Code]...
For some reason I'm suspicious of the Winduhs boot files, but I've run fixboot and the boot repair utility in Winduhs. Do I have to reinstall Winduhs?
I was windering, if you are writing a C program, I don't think you are supposed to commit the .o files and executables. How can you test your program without making a copy outside the git working dir?
View 3 Replies View RelatedI presume there is something in the JWM window manager - or Puppy Linux Lupu 5.01 itself that is conflicting with the normal loading of GMPLAYER....
I would like to know how to troubleshoot, and fix this problem if possible (even a workaround would be great).
I am in the process of running a set of performance tests for the latest Sun JVM 1.6.0_20. I am using for that the dacapo test suite: [URL]
I ran the test suite very often with all sorts of settings, but recently it happened once that my Ubuntu system froze. I could still ping the machine, but nothing else was responding any more, no screen output, no ssh login, not possible to switch consoles. After rebooting the system the system logs were quiet. No single trace of any problem.
I am using a custom compiled kernel 2.6.34: Linux i7 2.6.34-custom-201005231602 #1 SMP PREEMPT Sun May 23 16:06:01 CEST 2010 x86_64 GNU/Linux and I am experimenting around with the -XX:+UseLargePages JVM switch the requires to set-up the hugetlbfs on the Linux system: [URL]
A similar issue happened in March 2010 on one of our CentOS 5.4 systems where we run a heavy load Java application on, where we had to hard power off the machine and after the reboot there was no trace of the problem in the logs. On that server we used JDK 1.6.0_17 and did not use hugetlbfs.
My first question would be what to do so that next time something like that happens I have more information available after the incident to debug and analyse the problem?
I have Centos 5.3 installed on my pc. I have mysql, PHP and apache server running on my computer too.Is there any way I can test my website on my pc without running any stack ( lampp )?
View 10 Replies View RelatedI'm looking for a Linux program that will do some simple network performance/stress testing.
View 3 Replies View RelatedI'm trying to compile and link a program to test parapin.
Code:
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include "parapin.h"
int main(int argc, char *argv[])
{ ...
[Code]....
It looks like the library is found (no error anyway) but the functions in it are not seen. Text at the beginning of libparapin.a includes function names as used in the test program, and parapin.h declares them.
The disk I obtained from a seller runs fine in live mode (no installation) on my Windows XP. I liked what I saw. However, when trying to run cd live on my Linux PC it won't run. Linux pc currently has Kubundu 9.1 installed. Previous to that I had Mint 8 installed, but again Fedora 12 cd would not run. After getting an initial Fedora startup screen, I next receive a bunch of text, ending with a text screen of about 30 lines with "OK" in green to right of each line. At bottom is blinking cursor. That ends my machine's live running of cd.
Obviously, if I can not get cd to run live on linux pc, I'm not going to be able to install. (I should add that ubuntu, kubuntu, mint 8 and pclinuxos all ran successfully live on machine and three of them were installed successfully.) Perhaps, Fedora is at war with Ubuntu et al.
I need to run "Selenium" test scripts (written inside TestNG) on a headless linux server (Red Hat Enterprise Linux Server release 5.3) using Xvfb. while executing the script, I get the following warnings in the "server.log" file.Warning: Cannot allocate colormap entry for "#c0c0c0"Warning: Cannot allocate colormap entry for default background.This warnings occurs when the script try to launch Firefox. Firefox is not getting launched and the code gets hanged in the middle, without executing any test case.I suspect the problem could be with the Xvfb's screen resolution. screen resolution might be lesser than firefox'sexpected resolution.we can be able to specify our own display in POM file using <display> tag.
View 2 Replies View RelatedI have tried to install this package with yum and also directly - download the rpm, then rpm -Uvh ....
Both yum and rpm hang - yum when running the transaction test.
Any ideas about this package.
This is running F12, uname -r => 2.6.31.9-174.fc12.i686
I want to simulate a serial protocol in user space program to test reception algorithm. The protocol is similar to UART protocol but frame format is different. The duration of 1 bit is 114,46 us. In my main function I'm creating two threads. Tx for simulating transmitting data and Rx for reception data. For measure time I use create_timer() function and signals. Each thread has its own timer and signal handler. Tx timer uses SIGUSR1 and Rx timer uses SIGUSR2. Tx thread sets the global variable and Rx reads it.
The timers are set to sample with 114,46 us period. When they reach this value signal handler should set the flag. Flag is check in thread and some operation are made. When I set the timers period for longer time (100 ms) everything works fine but when I change it to default value (114,46 us) the Rx thread doesn't receive the proper data. I am wondering if the 114,46 timer period is possible to simulate in user space? Whether the time will give me the proper resolution ? Theoretically it should provide 1 ns resolution.
It's installed as a mobile broadband connection. Only works if my phone is plugged in during boot, otherwise plugging in my phone does nothing. For example, I booted my netbook earlier today but my phone wasn't plugged in. Tethering did not work, it just acts as if it isn't present. I rebooted (with my phone still attached) and now tethering magically works.
View 5 Replies View Relatedam currently using Windows 7 across my networked PCs at home.
I've just received my new Samsung N250 Plus Netbook which comes with Windows 7 Starter (yuk). I read a post on Ebuyer from someone who has installed ubuntu on his N250 so thought I'd give it a go tonight.
My main concern is whether my wi-fi card (Broadcom 802.11n according to windows) will work when I remove windows and install ubuntu. I intend to use the netbook for internet use only while working abroad.
Is it possible to test it works by running ubuntu from my USB stick first (without removing windows 7)?
I have a mobile phone (T68i) attached to my server and everything works fine. But sometimes the phone craches and needs to be rebooted wich is quite annoying.So I want to use a newer phone that is not 10+ years old :-)But when using a K610i or C702 the phone does not appear on /dev/ttyUSB0 as expected.When inserting the usb cable a dmesg gives this:
Code:
[5924924.451033] usb 1-3: new high speed USB device using ehci_hcd and address 19
[5924924.576728] usb 1-3: New USB device found, idVendor=0fce, idProduct=d0d9
[code]....
I am trying to install mysql 5.1.44..so i downloaded the binary package, i extracted it and then followed the instructions that were in the manual but i keep getting this error when running this command
Code:
scripts/mysql_install_db --basedir=/home/mosty/mysql
the error is
Code:
Installing MySQL system tables...
100315 20:07:27 [Warning] Can't create test file /var/lib/mysql/mosty.lower-test
100315 20:07:27 [Warning] Can't create test file /var/lib/mysql/mosty.lower-test
[code]....
You can try to start the mysqld daemon with:
shell> /home/mosty/mysql/bin/mysqld --skip-grant &
and use the command line tool /home/mosty/mysql/bin/mysql to connect to the mysql database and look at the grant tables:
shell> /home/mosty/mysql/bin/mysql -u root mysql
mysql> show tables
I have installed Postfix + Amavisd-new, then I am started all services (and configured main.cf and master.cf to use amavis).
The questions are:
1) I am trying to test antivirus scan using eicar test virus
Code:
And the message is successfully delivered to mailbox with mark "CLEAN" in maillog. But I cant see any attachment using
Code:
Where is my mistake?
2) Should I update clam and how I can do it?
3) Is spamassassin enabled by default in amavis (I have started daemon)?
4) Where configuration files of spamassassin is stored?
I installed an RPG platform (Fantasy Grounds) on my system via Win7. Once installed, and known to be working, I logged off Win and back to Ubuntu and ran the program via Wine. Once it starts, I hear my PC rev up, see the system monitor crank up the CPU and see that "Fantasy Grounds" is running and using about 40% of my CPU usage... but I don't see it. There is no GUI, no nothing. I can end process and the CPU drops down to normal. Anyone have any idea as to why a program would be running, but I have no visible evidence that it is?
View 2 Replies View RelatedI spent some time on this issue and I just wanted to share a resolution that was difficult to find (at least for me).Yum was working fine for me for a long time on my Fedora 12 installation x64, when suddenly it stopped during transaction checks. It didn't matter which package I was installing, or if I performed an update or anything. Always in the same place, and it always required a kill -9 to stop the process. Even with debugging turned on in yum (-d 10 -e 10 --rpmverbosity=10) it would not display an error...just hang during the transaction check. I tried the following to no avail:
Code:
# rm -f /var/lib/rpm/__db.*
# yum clean all
# rpm -v -v rebuilddb
Still, it would lock after the transaction test. The only thing that solved my issue was running:
Code:
# strace yum -y update This showed me that I had a stale NFS mount that was in a hung state. I tried umount but it just showed that the device was busy and would not unmount. The only way to fix it was to perform:
Code:
# umount -l /mnt/data which allowed the stale mount to be removed. Once that was cleaned up, everything worked. I struggled with this because there were no debugging messages, and I had no idea the transaction check would go through all of my mounted drives. However I just wanted others to know about this, because it was a rare issue, and I had trouble finding the solution.
Here's the error message I get when trying to run Thunderbird 3.Thunderbird is already running, but is not responding. To open a new window, you must first close the existing Thunderbird process, or restart your system.I can't find it running anywhere.
View 9 Replies View Related