Ubuntu :: Software Center All Installs Stop At Applying Changes 90%?
Apr 4, 2011
I installed Iced tea to run java stuff today from Software Center. The Iced tea installed and works like it should but i get a error message when applying changes is at 90%. The same error comes with deletes and other downloads too.
Here is the message:
Code:
InstallArchives() failed: debconf: DbDriver "config": /var/cache/debconf/config.dat is locked by another process: Resource temporarily unavailable
debconf: DbDriver "config": /var/cache/debconf/config.dat is locked by another process: Resource temporarily unavailable
[code]...
View 1 Replies
ADVERTISEMENT
Nov 29, 2010
Ok I have used dropbox for a long time but never had an issue but since recently switching to Ubuntu it seems that when I download a file and drag it into my dropbox the file shows in dropbox but it doesn't seem to be applying ...after dragging it into dropbox in the upper right hand corner of the file there is a blue circle with two white arrows in it while all existing files that I out into dropbox prior to using Ubuntu are there and accessible and have a green checkmark in the upper right hand corner..
View 4 Replies
View Related
Mar 10, 2010
I just loaded ubuntu 9.10 on my laptop. Toshiba it loaded fine. So I ran update on the system and it updated to teh 9.20 kernel (dont remember act numbers) But now it wont reboot.
I get udevadm trigger is not permitted while udev is inconfigured udev settle is not permitted while udev is unconfigured
svgalib: Cannot open /dev/mem Gave up waiting for root device. Common problems:
-Boot args (cat /proc/cmdline)
- Check rootdelay= (did the system wait long enough?)
- Check root= (did the system wait long enought for device?)
- Missing modules (cat /proc modules; ls /dev)
ALERT! /dev/disk/by-uuid/e1768deb-95e0-44bd-96b0-b725c73d42af does nto exist. Dropping to a shell
Busy box v.1.13.3 (Ubuntu 1:1.1.13.3-1ubuntu7) built in shell (ash) Enter help for a list of built-in commands (initranfs)
edit: Kernel 2.6.31-20-generic. It had kernel 2.6.31-14-generic I was able to boot back into the old kernel.. so whats happening? why wont the upgraded kernel work?
View 8 Replies
View Related
Jun 18, 2010
So I just recently installed Ubuntu Lucid Lynx over my old XP system and I have been loving it so far. I did run into a problem though. Shortly after installing Ubuntu, it prompted me to install updates and I did so. After the updates had installed, my computer restarted and the whole desktop theme/look changed to a older looking version of Ubuntu. I really liked the look of Lucid Lynx and have been trying to get it back.
View 1 Replies
View Related
Mar 11, 2010
I just loaded ubuntu 9.10 on my laptop. Toshiba it loaded fine. So I ran update on the system and it updated to teh 9.20 kernel (dont remember act numbers)
But now it wont reboot.
I get udevadm trigger is not permitted while udev is inconfigured udev settle is not permitted while udev is unconfigured svgalib: Cannot open /dev/mem Gave up waiting for root device.
Common problems:
-Boot args (cat /proc/cmdline)
- Check rootdelay= (did the system wait long enough?)
- Check root= (did the system wait long enought for device?)
- Missing modules (cat /proc modules; ls /dev)
ALERT! /dev/disk/by-uuid/e1768deb-95e0-44bd-96b0-b725c73d42af does not exist. Dropping to a shell
Busy box v.1.13.3 (Ubuntu 1:1.1.13.3-1ubuntu7) built in shell (ash)
Enter help for a list of built-in commands (initranfs)
Kernel 2.6.31-20-generic.
It had kernel 2.6.31-14-generic
I was able to boot back into the old kernel.. so whats happening? why wont the upgraded kernel work?
View 9 Replies
View Related
Jul 22, 2010
I noticed that after applying updates to my ubuntu 10.4 desktop my printer was not working. I discovered that cups was no longer running and I was unable to get it to start. After re-installing cups using the below command everything is now working. This is the 2nd time I've had to re-install cups after patching.
Quote:
sudo apt-get install --reinstall cups
This appears to be a critical bug: #554172
View 2 Replies
View Related
Nov 7, 2010
I entered to gnome-art, picked 3 icon sets and downloaded them, then opened them with theme installer which installed them on the system. I pick 1 of them, the icons theme switch, but it switches to the gnome default icons. can't seem to find any solution to the situation.
View 8 Replies
View Related
Mar 17, 2011
After applying an update about two or three days ago, I restarted my system and now I'm getting a black screen at login. I can hear the brief drum sound clip that plays when the login dialog box pops up, but the screen is completely black and I can't see anything. I'm still able to access low graphics mode via the fail-safe option in the recovery mode menu. So far I've tried the following commands in the terminal:
Code:
sudo apt-get remove --purge xserver-xorg-video-ati xserver-xorg-video-radeon
sudo apt-get install xserver-xorg-video-ati
sudo apt-get install --reinstall libgl1-mesa-glx libgl1-mesa-dri xserver-xorg-
core[code]....
View 9 Replies
View Related
Jun 28, 2011
After applying Ubuntu updates i am now unable to mount volumes it tells me that i am denied.I have checked my user permissions and i am allowed to mount. I have also downgraded MountAll to no avail.
View 6 Replies
View Related
Sep 7, 2010
I've a problem applying a patch in RHEL 3.3.
In RHEL there is a problema with ACL as can be read in: [URL]
I've downloaded the patch from "Attachments". I try to apply the patch, but I receive this error:
usr/src # patch -p0 < aclPatch.txt can't find file to patch at input line 4 Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|diff -uNr acl-2.2.3.org/libacl/acl_get_file.c acl-2.2.3/libacl/acl_get_file.c
|--- acl-2.2.3.org/libacl/acl_get_file.c 2002-09-05 08:19:54.000000000 +0900
|+++ acl-2.2.3/libacl/acl_get_file.c 2004-08-25 12:49:58.000000000 +0900
--------------------------
File to patch:
========================================================
It seem that can't find acl_get_file.c, no?
- Where can I download the src file?
- Or what's the problem?
View 8 Replies
View Related
May 29, 2010
Whenever i try to apply a new theme .. everything seems to be ok except the gnome menu ... sometimes when applying icons, depending on the theme you can see it has applied almost everywhere except when u go to "Places" the icons there in the gnome menu is still on default.. have a look at the screenshot here..
View 3 Replies
View Related
Jul 6, 2010
I tried applying an emerald theme yesterday, and when I did, it somehow affected the login screen, now it looks old and crappy like win98. I tried disabling emerald and even uninstalling it, but the login screen remains crappy, how do I get it back to the way it was?
View 5 Replies
View Related
Dec 12, 2009
After applying some updates to F11, I was unable to login. After putting the username and password in, the dialog would go away and it would appear that the window manager was trying to load. Somewhere in the process the mouse and keyboard stops responding. The HD activity lights flashes for quite a while but later goes out.
Hoping that F12 would help, I upgraded. The upgrade went well but the problem still exists.
View 5 Replies
View Related
Feb 13, 2011
I updated yesterday. Main change was from kde 4.5 to 4.6. Since then when I start kmail I have always a message about the certificate not applying to the given host. I use kmail to connect to a dovecot imap server. Everything worked fine before. I know very little about certificates. I tried to generate again the certificates (running /usr/share/doc/packages/dovecot/mkcert.sh) but I don't know what else to do.
View 8 Replies
View Related
Aug 9, 2009
Is it possible to apply a rule to a specific local IP? For example lets say I have a two IP's assigned to my server, 1.1.1.1 and 2.2.2.2.;.I want to deny all connections going to 1.1.1.1 only asides from a couple of trusted IP's I will define.
View 1 Replies
View Related
Dec 2, 2010
I have built a database driven web application that has a user and group system that works in a similiar way that Linux handles user access. Breif explanation: A users can access various resources, the resources are assigned to a single group and users can have many groups.
Users
Code:
id name
-- -------
1 RedRanger
2 GreenRanger
3 BlueRanger
[code]....
Lets say that RedRanger needs to be denied access to resource a if I remove him from group 33 he can no longer access b or c which is no good. The only alternative is to change a's group and add everyone else to the new group, this isn't so bad for 3 users, but what about 3,000?
View 1 Replies
View Related
Aug 10, 2010
I'm developing some apps on my Ubuntu 10 box. Firefox appears to be applying its own theme to the web page (ex the form inputs are slightly rounded). I need to view this as a browser typically would as the users of the app will be on various hosts. The default theme appears to be uninstall-able and appears to be called Tango.
View 3 Replies
View Related
Mar 9, 2010
I don't know what happened here, but running debian lenny and all of a sudden my icon theme is rodent, a decent chunk of icons are not showing up, and when I go to the icon changing panel they all look the same - like rodent! Icon themes I put in ~/.icons don't show up, and the icons in /usr/share/icons are permission as such:
root:root
755
View 2 Replies
View Related
Jul 9, 2011
I have been running 11.4 now for quite a while. I installed maintenance to it trough Yast's Online update and now can't boot except through the failsafe mode of GRUB. How can I pinpoint where the failure is?
View 3 Replies
View Related
Nov 15, 2010
I was wondering if there is a way to tell rsync to only apply changes (delete, overwrite,create) only if all files in the file list transferred successfully.Just to clarify, this would essentially be putting a transaction around the transfer.
View 3 Replies
View Related
Jan 6, 2011
I have installed the tux-3.2.18-9.fc6.i386.rpm succefully in CentOS 5. I have got the following error, when I apply the patch tux3-2.6.18-1 to the kernal.
[Code]...
View 4 Replies
View Related
Oct 18, 2010
Code:
find "$SOURCEDIR" -type f -name "*$ITEM" -printf "%P
"
I want to apply some shell script to the files outputed by the find command.
How can i do this.?
There are multiple files directories and also multiple files.
View 14 Replies
View Related
May 9, 2011
My self-built PC had a BT wireless adaptor in it which worked, albeit after a bit of a faff, with Ubuntu 10.10 in connecting to my BT HomeHub2.
When I came to use it last week it would not connect. I'd not changed any hardware but I had been applying regular updates via Update Manager.
Bearing in mind the "faff" factor, I decided to try a different (Edimax) wireless card but got the same result. Upgrading to 11.04 has made no difference either.
It does *try* to connect but fails, so I think the card is installed correctly. I've also tried a full reset on the HomeHub and the setup works fine with W7.
View 6 Replies
View Related
Dec 28, 2010
I'm using the serial port of a device to communicate with a hardware. (that can assume some different configurations of baud rate, data bits, etc.) Well, I can obtain that configuration, but I'm not certain in how to apply them to the serial. I'm using the struct termios to do that. I did some search, and found how to configure the baud rate and data bits. I'm doing this:
[Code]....
how I set the stop bits (1, 1.5 or 2 bits), the parity (even, odd, none, mark or space) and the flow control (hardware, software, none or xon/xoff)?
View 1 Replies
View Related
Apr 11, 2011
regarding user permissions:
I have user A who owns a .jar file
I have user B. who needs to run the .jar file
I have Java which is owned by root.
I would like to work out whether/how user B can run the .jar file, in Java, with the permissions of user A. As I understand it, a running process in Linux typically takes the permissions of the user who executes it. However, the way I'd like to configure user B, the permissions I want them to have wouldn't be sufficient for the process to successfully run.I know you can also set a process to take the permissions of the owner of that process, but in this case the actual... executing process would be Java, which runs the .jar file, and I def. don't need this, let alone every single instance of Java on my server, to execute with root priviledges. So like I said, basically I am trying to work out how to let user B run this specific process with the process elevated to this set of priviledges which user B otherwise does not have.
I recently started running a Minecraft server for myself and some friends and am running it via Linux. I'd like to set things up so that a friend of mine can, as needed, telnet into the server and restart Minecraft as needed, as well as a couple of other things, without giving this friend the same access rights I've given myself to the same files. The minecraft server process runs in a screen, and I've worked out where screen can be set up so multiple users can get into it. However, if I'm running minecraft under my own user name, then that seems like it will just end up letting my friend, from his account, screen into my own account. SO the brilliant idea I had was, what if I had one user account which only existed to run the server, which both me and my friend could screen into as needed, which wouldn't have any more rights to anything than my friend has with the exception of being able to execute this one .jar in Java.
View 1 Replies
View Related
May 29, 2010
Im having problem in configuring squid server and applying ncsa authentication
Here is my configuration in squid.cong file
View 6 Replies
View Related
Jun 8, 2011
I just put the latest updates onto My CentOS 5.6 server. It started life as a 5.4 Server, then the upgrades took it to 5.6.
The latest updates did a Kernel Update and the server sent me two messages : -
-----BEGIN MESSAGE-----
[2011-06-08T12:37:17+0200] centos54.xxx.yyyyy.com
ALERT : [2011-06-08T12:37:17+0200] msg=<START>, program=<Samhain>, userid=<0>, path=</etc/samhainrc>, hash=<256A548F71A768CC1E054F0C1E90E8674D36A09BDF9E5D13>, path=</var/lib/samhain/samhain_file>,
[Code]....
View 5 Replies
View Related
Apr 8, 2011
I'm having trouble applying a CSS file to my Apache directory listings. I am running Apache 2.2.3, and have the following lines in my httpd.conf file:IndexOptions FancyIndexing FoldersFirst IconsAreLinks IgnoreCase VersionSort NameWidth=* HTMLTable IndexStyleSheet "css/dir.css"
View 2 Replies
View Related
Feb 4, 2010
I recently updated my fc12. before the update all was well but now it takes very long to boot. when i checked the text output by pressing F3 it stops at "Applying Intel CPU microcode update".
View 1 Replies
View Related
Mar 16, 2010
Yesterday I applied the su security patch to my openSuSE 11.2 x86_64 system.After applying the patch, any attempt at su failed, and after rebooting the system earlier this morning any login (root, user, otherwise) fails with a "Permission Denied".Is it possible that the su update somehow messed up my (standard) pam settings?
View 10 Replies
View Related
