Ubuntu Servers :: Set CLI Font Size (screen Resolution) From CLI
Mar 7, 2010
I've just installed Ubunter Server 9.04 (after having installed 9.10, having problems with it, and uninstalling it). Mostly, 9.04 is working well so far, but for one nuisance: the font is huge.
Well, okay, not huge, but big. On my other machine, running Ubuntu 9.04 desktop, same size monitor, I have the resolution set to 1440x900 which gives me 46 lines on the CLI (with the window maximized, but not full-screen). On the server machine, however, I'm getting only 25 lines -- and there's not even a window title-bar, menu bar, or panels taking up any of the landscape.
So my question is this: Not having a GUI nor any of the associated display-management software, how can I set the screen resolution or otherwise get my display font smaller, using the CLI?
I am using Fedora 11 and when the system booted, the screen resolution and font size were increased all of a sudden. Then I configured the screen resolution using
Quote:
system-config-display
to the actual that I had.
But the fonts in gedit are still big. Although the settings shows the default settings that I search on several blogs i.e.
Quote:
Edit -> Preferences -> Fonts & Colors -> Use the system fixed width font (Monospace 10)
I am have upgraded from 9.04 to 9.10 in my laptop. After performing the reboot, the shell/console resolution went very high and the font size went too small. How to regain the old console shell resolution as in 9.04. I require this urgently as my laptop suffers the white screen problem. Switching between Ctrl+Alt+F6 and Ctrl+Alt+F7 I could get back the screen as the change in the resolution switches off and on the screen, so that I can negotiate with the white screen problem.
I'm running Hardy 8.04.. Once in a while when I boot up my system, all of my fonts are different - everything is very large. If I go into the screen resolution, I have no choices higher than 800x600. If I restart the system, there is a good chance that the screen resolution will go back to normal. what I can do to fix it?
My Squeeze installation has the horrific 80x25 line display, and I cannot stand it. I know it can do better, because the grub screen is very tiny. I ran dpkg-reconfigure console-setup, but the offerings there aren't much better. I don't know what happened to the good ol' days of grub when all you had to do was pass vga=791 to the kernel to get a decent console size... but it seems they are gone.
I don't really understand this new v2 grub... I don't know why it was necessary to change how it was configured, when it seemed to work so exquisitely. how I would accomplish the functional equivalent of passing vga=791 (1024x768@75hz) to the kernel in grub
I feel really stupid posting this, but I can't find what I am looking for. I feel like I have a decent understanding what is going on, but I am missing something very elementary. I have several mpc clientpro machines that are all in one's with 17" monitors built in. I can't get any resolution to fill the screen. I have been playing around with settings in xrandr, to no avail.
In windows xp it is usually ran at 1024x768 resolution which is supported. However there will be about 2 1/2 inches of blank space on the right side of the scree. and then another 2 1/2 inches of blank space on the bottom followed by about 2" of what seems to be a mirror of the top 2". I can change to several different resolutions all taking up different sizes of the screen, but nothing will fill it.
I understand I can't just do anything I like, like it would be unreasonable to expect the card to output 1920x1080. But can't I get it to at least fit the screen? Whether it was 1024x768 or 1152x864 or 800x600.
I have been searching and searching, and I think I am just simply misunderstanding a key term that is not allowing me to find more information on this. Something like panning, overscan, etc.
Running new installation of 11.3 with KDE Desktop. I have sorted out text appearance and size thanks to pwabrahams in another thread but I have a big problem with screen size/resolution.
In previous installation of 11.1 on the same machine I was able to change the resolution of the graphics in order to fit the windows on the screen more comfortably. I used to use something like 1240 x 1048 but in the System Settings > Computer Administration > Display the resolution is set at 832 x 624 and no higher resolutions are offered.
I cannot find out the details of the embedded graphics controller (10 year old Dell PE6300 server) but the system information report it as ATI Mach64 GI with swrast (No 3D acceleration) version 7.8.2. I have spent several hours reading the many pages on graphics in this forum and have concluded that I should probably be using a legacy driver but have no idea how to change the driver. Of course if it were possible to increase the resolution to 1240 X 1048 without recourse to changing driver that might do it if I knew what setting to tweak.
I can't change fonts in Firefox preferences (Content).
My OS is openSUSE 11.3, KDE 4.4.4. release 8.
Any type and size of font I use, nothing happens. It's still same font which I choose for the first time I've started Firefox afer installing openSUSE 11.3.
I have a 64 bit Ubuntu 9.10 workstation with two virtualized guest OSes using KVM/QEMU. Also both 64-bit. One is Fedora 12 the other is beta of Ubuntu 10.04.
The problem is that I would like to use a larger size display that is configured by default.
Both guest OSes have a maximum screen resolution of 1024x768. I would like to increase this to something like 1280x900 or 1440x900. The resolution of the host system is 1920x1080.
This configuration appears to be a result of the installation detecting the resolution being reported by the virtual screen during installation.
The only information I have found on the subject suggests modifying the xorg.conf file in the /etc/X11 directory. Neither guest system has this file.
I tried creating one by hand in the Fedora system and managed to render it completely unusable. Not a big deal as this is recently installed and can be reinstalled easily.
am just coming from a clean install of Lucid Server x64 on a desktop configuration. No problems really but for one.With no GUI installed -something I wish to remain as is- I am having difficulties browsing through bash due to low resolution. So the question is: "how can I go to a higher screen resolution?"
I've just finished installing Ubuntu Server 10.4 onto my ASRock ION330. I don't have a spare monitor lying around, so I've plugged my TV into my machince via HDMI. This works, but the text is tiny. There are too many rows and columns of characters (or equivalently, the font is too small). When I try changing the TV resolution to a smaller size, it just cuts out the rest of the text. So from the command line, how do I make the text bigger?
Trying to connect an intel atom based TC which uses the Intel D945GSEJT motherboard. We have several old AcerPower F1 PCs which connect OK but the new TC doesn't provides a weird screen resolution at the LDM - 1152x864. I've logged in and looked at the monitors section and it thinks there is a laptop monitor for some reason in addition to an undetected monitor. If I try to change anything I lose my mouse which is VERY strange.
If I boot 10.04 using a USB memory stick on the TC everything is fine - I can get 1280x1024, the monitor is detected and all is well. I've tried changing monitors, fiddling with lts.conf etc with no success. For info, my current lts.conf is as follows
The font size on Chromium for the URL and tabs is *far* too small. I went into the "Under the Hood" settings, but to no avail. How can I make this bigger? [URL] Also, the bookmarks bar seem to be inheriting system fonts, but it looks like that size is hard coded too. I love chromium but I need some accessibility here.
i was using eclipse in windows 7, th fonts are small so I can see the code good. But I want to use in Ubuntu so I setup. But here the font size is huge and windows are taking more space and I am unable to code.How to reduce the overall font size and make it small?
Does anyone know how to change the font size of the user interface elements of the chromium/chrome browser? I've searched around for a solution but only come up with how to change the font size of viewed sites. Just to be clear, I want to increase the font size of the tabs headings, bookmark menu etc, not the font size of the sites I'm viewing...Using chromium on lucid...
I am running Ubuntu 10.04. When I first installed it, the virtual terminals had a good font size. After a few weeks, I set the visual appearance setting to normal (in the gui desktop). Doing this required me to install third party graphics drivers from nvidia. in installed fine, and my gui desktop still functions as I would expect, however, all of the virtual terminals now have a much larger font size, as does the ubuntu boot logo.
I have a Mac Powerbook G4. About two months ago my font sizes changed on Firefox browser. I have searched and tried many firefox apps to fix the problem, but NONE of them work.All I want to do is go back to my old firefox with normal size fonts ALL THE TIME, ALWAYS.
I'm a student in a linux class and we just installed fedora. so far it's nice except that the work we do is in the CLI which I can barely see because it's so small on the screen! I've been squinting at the screen for a little while now but it's just proving to give me more of a headache and hurt my eyes than anything. Anyone know how to change the font size so that I can actually see the work I'm doing?
I'm running OpenSUSE 11.2 on my Acer Aspire One with a 9 inch LCD. I have configured the monitor in Sax2 to reflect the size and 1024x600 resolution, and as a result the desktop fonts are all sized correctly.
However, the fonts on the KDM log-in screen are too large, and I'd like to reduce them if possible. Looking in the KDE Control Center, I tried using the Login Manager utility to adjust the KDM theme, but any changes I made seemed to have no effect i.e. changing the font size, or even the overall theme itself, still resulted in KDM using the default green OpenSUSE theme with large fonts.
Does anyone know, therefore, how to adjust the KDM font size or DPI in OpenSUSE 11.2?
I'm running OpenSuSE 11.3, upgraded from 11.1, with the Nvidia video driver. The font size for Yast, Firefox, and several other things is too small. I've tried changing it using the Appearance section of Personal Settings. That changes the font size in some contexts such as the window titles and task manager, but not in all contexts. In Firefox I've tried something similar, but it doesn't affect the font used in the tabs, function bar on the top, etc. The font in those parts of Firefox is the same as the one in Yast. So there's some other font setting around, but I haven't been able to find it. I've tried Google and SDB, but have no success searching there.
I need to print some pdf files. I use Kpdf and, Adobe Reader. Is there a way to check the font size of the file and to set the font size I want for printing?
No matter what I do with system settings I cannot change the font size or type of font in Firefox and Thunderbird - other programs as well. Is there somewhat to change this? The fonts are too small and I have vision problems. I know I can hit ctrol ++ but with other distros I can change the deflt font size for the system. I am using openSUSE 11.3 and like it very much except for this lack of a feature.
I know, the question seems idiotic, but I accidentally changed all the 'theme fonts' to Sans 12 (a keyboard shortcut handy for switching between different display sizes) I don't know if I'm getting the font or just the size wrong but it doesn't look quite right anymore...
checking the 'correct' font name(s) and size(s) in the appearance settings under 'Fonts'.
When zooming to 100% in listview the font gets huge, but only in the listview panel (see image). Where to reconfigure this to normal behaviour (I'd like the 100% fontsize to be the same as in the treeview in the left panel). I had this behaviour already with the previous relase of Ubuntu, and upgrading to 10.04 did not solve the problem.
Is it possible to change the grub 2 menu font size? i have a higher resolution and the entries have very tiny and hard to read. I know i could lower my current resolution but i don't want to decrease the text and picture quality.
