I have been stuck with this for quite some time now. I have installed ldap and configured it as per instructions fromI am able to query the ldap server without forcing the TLS operation to be successful.But with ldapsearch -d -1 -x -h servername -ZZ -b dc=example,dc=eduI get the error
TLS: peer cert untrusted or revoked (0x42)
TLS: can't connect: (unknown error code).
ldap_err2string
[code]....
Just installed openldap server on a VM CentOS called 'ldapsrv', it works fine, ldapsearch returns all ldap information.
Installed openldap client on another VM CentOS called 'ldapclient1', configured it with most basic configuration, no ssl/tls etc. but ldapsearch returns error:
ldapsrv is pingable:
Some outputs:
PHP Code:
PHP Code:
LDAP is endlessly not working, due to difficulties to simply configure it. I even cannot make the first steps of the installations ... It seems so difficult ... After many howto, wiki, reading, re-reading the errors are still there, always different, and not working.Is there an admin, coming from hell, that made running a LDAP server for sharing the basic configuratin files /var.. /etc... of a working LDAP Server in a tar.gz?
View 18 Replies View RelatedI have successfully installed Openldap and am able to authenticate to it, but I can not get the replication server operating correctly. I have followed all of the steps in doing so from this guide, [URL], but there are a few things i don't understand. when creating the consumer_sync.ldif file on the consumer server it says to replace ldap01.example.com to your server's hostname.
would this be the provider or consumer? My porvider is ldap@tech.local and my consumer is ldap-backup@tech.local.... so what one are they refurring to with the ldap01? And is there a way to push, or sync the two server manually? How do I know if they are backing up properly? How do I test?
Making a Samba Server with LDAP authentication. Will post as I go along. Found these sources, anything/hiccups I should know before jumping in? Figure would follow the official documentation then check the others for comparative errors.
https://help.ubuntu.com/10.04/server...ap-server.html
https://help.ubuntu.com/10.04/server...amba-ldap.html
http://tuxnetworks.blogspot.com/2010...cid-short.html
Also Do other computers that want access to server also need samba installed (or just client)?
The server is 10.04 and my proposed client is 10.10, does this create problems?
Do I need to use ACL? I see them only in certain places.
Using xfce after Ubuntu install, not sure if this matters.
(This was posted at the end of another thread, where it probably didn't belong, so reposting here)I have Active Directory set up on one machine (and I can't really adjust the settings very much) and Ubuntu Server 10.04, which I would like to use as a client.I followed the directions at https://help.ubuntu.com/community/LD...Authentication, but when I get to
Code:
getent passwd
I don't see anything from the LDAP, and ssh'ing into the box from an LDAP/AD username certainly doesn't work.
In addition, I've attempted to use Webmin's LDAP Configuration module to configure it. I can connect to the server and can browse it with the LDAP browser with my settings, but the Webmin package doesn't recognize the users (which are organized in one of four Organizational Units (OUs) within the OU that I have as my Search Base) as users,
we have a weird problem with our opensuse 11.2 server installation.
We want to set up a LDAP Server using the Yast-LDAP Server configuriation tool.
This indeed already worked weeks ago until....this week.
Maybe some updates??!
I do not know what happend exactly. The server just does not want to start again and throws following error:
Starting ldap-serverstartproc: exit status of parent of /usr/lib/openldap/slapd: 1 failed
This happend after a little check of the configuration, but without a change, with Yast. Google delivered only "reinstall your box"-answers.
So.. i did that. And now the "mystical" part: The SAME ERROR occurs with a fresh vanilla system with a brand new and simple configuration (certificats, database, pw...the first Yast config dialog...). I did not change the way i set it up.
I remember, when i did this the first time with 11.2 on that machine, when no problems occured...everything was running out of the box (except the "use commen server certificate" option...).
I installed and configured LDAP server and client on RHEL5 successfully. Problem is that when I add more than one user on server and clients, It shows error 'invalid user'.When I run the command:-#chown -R user:users /home/user, It shows error 'invalid user'. by step for adding and modifying more users in ldap servers.
View 1 Replies View RelatedMy slapd.conf file
# This file should NOT be world readable.
#
include /etc/openldap/schema/core.schema
include /etc/openldap/schema/cosine.schema
include /etc/openldap/schema/inetorgperson.schema
include /etc/openldap/schema/nis.schema
# Allow LDAPv2 client connections. This is NOT the default.
allow bind_v2
# Do not enable referrals until AFTER you have a working directory
code....
I've setup an openldap server, and am trying to add .ldif files to the database.
I am constantly getting the following error, no matter what I do:
I have been trying to set up an LDAP server for a development environment as part of an internship for a week now, and I cannot get past this point. I have been following the 10.04 server guide to set up LDAP here: URL...Once I get to the following point in the guide, it just hangs:"As an example of modifying the cn=config tree, add another attribute to the index list using ldapmodify:"I've been working on this for a week and can't understand why this won't work. I am fairly certain that I've followed the guide to a 'T.'Any idea why am I receiving a permission denied error? Is this a permissions issue with one of the config files?
View 9 Replies View RelatedI'm checking with a sniffer and there's activity going on between the client and the LDAP server... as a matter of fact, the sniffer shows that the search is producing one ldap item, however, php says it can't contact the ldap server (after it has bound and everything):
The script is working beautifully on another host with debian.
i have configured ldapserver on rhel4 for creating address book
following are configuration files on ldap server
/etc/openldap/slapd.conf
include /etc/openldap/schema/core.schema
include /etc/openldap/schema/cosine.schema
include /etc/openldap/schema/inetorgperson.schema
include /etc/openldap/schema/nis.schema
i am able to import this ldif file into database.also when i perform the ldapsearch on this server with command"ldapsearch �x �W �D �cn=manager, dc=example, dc =com� �b �dc=example, dc=com�" i get correct output.
but when i am trying to search from another client machine, i am getting "error ldap_sasl_bind(SIMPLE): Can't contact LDAP server (-1)"
also when i configured address book on mozilla on server., it is working fine.but not working on another machine.is any configuration is missing on client machine.both ldap server and client are configured on rhel4es without any firewall or selinux.
i have successful secure ldap replication but i could not make ldap client to direct its authentication to slave ldap
here is my config file on ldap client (i am not sure if it is the right place though)
ip : 192.168.1.183 is master ldap
ip : 192.168.1.185 is slave ldap
pico /etc/ldap/ldap.conf
#
# LDAP Defaults
code....
I am using RackMonkey to map out my lab. Unfortunately, due to RM limitations, every user who accesses the site has write access UNLESS they are logged in as a user named "guest". I currently have Apache allowing only the users (sysadmins) in an LDAP group access to RM, but I would like to allow read-only access for other users as well.I found mod_authn_anon, but I am having trouble combining the two authentication methods. I am using Apache 2.2.18 (compiled myself) on SLES 11.1.
This is the common part:
Code:
AuthType Basic
AuthBasicProvider ldap anon
Order allow,deny
Allow from all
This part by itself works for the LDAP authentication:
Code:
AuthName "System Admins"
AuthLDAPURL "ldaps://example.com/ou=ldap,o=example.com?mail" SSL
Require ldap-group cn=SysAdmins,ou=memberlist,ou=groups,o=example.com
This part works by itself for guest access:
Code:
Anonymous guest
Anonymous_VerifyEmail Off
Anonymous_MustGiveEmail Off
Anonymous_LogEmail on
Require valid-user
But if I have both of the previous blocks enabled at once, then guest access does not work. If I throw in a "Satisfy any", then I am not prompted for a username at all. How can I allow access to this LDAP group and to a user named "guest", but not allow all valid LDAP users to log in?
I'm trying to set up a Linux server and I am new to this. I have gone through most of the configuration using SAMBA 3.0 and when I populate the ldap directory all I get this error before the password request:
Then when I perform an ldapsearch to see if the directory is populated I get this message:
I'm positive all my .conf files are done right.
I'm wondering how I can enable LDAP support for my Ubuntu 10.04 LTS server running Apache 2 and PHP 5.3.2? What I'm trying to do is allow users on my existing company's LDAP system to login to my Elgg site automatically (and possibly have their details filled automatically).
View 1 Replies View RelatedIn the past I found some great help on this forum, so here goes. Bare with me because it's a long story. I'll try to be as complete as possible. I've installed and configured OpenLdap on a virtual machine with ip 192.168.39.134. I've added 2 users via LAM. In the ou WikiUsers and the domain is wiki.local.
I've then created another host with ip 192.168.39.133 with mediawiki installed on it. Then I added the extension LDAPAuthenthication. In the LdapAuthentication file I added this code (only the last paragraph is mine, I added the others to show it's location in the script):
Quote:
$path = array( $IP, "$IP/includes", "$IP/languages" );
set_include_path( implode( PATH_SEPARATOR, $path ) . PATH_SEPARATOR . get_include_path() );
[code]...
I know I'm close because I can't register any new users or accounts on the mediawiki site. Although I could before I added the LDAP service. This is indeed all just to test and get to know how LDAP works. That's why it's all virtual in VMWare. I did not really configure anything on the LDAP, i just installed it and chose a domain (wiki.local).
can anyone tell me what is the difference between these two files of LDAP client /etc/ldap.conf and /etc/ldap/ldap.conf and for what purposes these two files gives services. Is it necessary to have these two files at a time ?
I use these files to install LDAP client to authenticate with our LDAP server by creating a symbolic link of /etc/ldap.conf to /etc/ldap/ldap.conf.
I had a machine that is using ldap, but need to remove it completely.I edited the /etc/nsswitch.conf and removed all references of ldapand renamed /etc/ldap.conf to /etc/ldap.conf.bakI can log in as root, but cannot log in as any user in /etc/passwdIn the /var/log it shows pam_ldap: missing file "/etc/ldap.conf"I am guessing I am missing something else?I never set this machine up for ldap, was here when i got here, so not sure of steps to even put ldap on.
View 2 Replies View RelatedI am aware that there is a qmail-ldap package to have ldap back end for qmail. But I need only user authentication for qmail through ldap (not the backend; i.e still keeping Mysql as the database). I am pretty new to mail server configuration. I have just configured a (q)mail server (which is currently my sand box) and am able send and receive emails. I am planning to add ldap authentication (just that) to it. Can anyone point me to the right direction?
View 6 Replies View RelatedIs it even possible to use LDAP on Ubuntu 11.04? After a full day of googling, every guide I can find is either for another version of Ubuntu or is horribly broken (including the official docs).
View 2 Replies View RelatedI've been working though [URL] tutorial trying to get openldap working.
When I get to the point where i'm setting up the client. More specifically when I do ldapaddgroup testgroup I am sent this error
"You must have OpenLDAP client commands installed before running these scripts"
I have installed the ldapscripts package along with all the required ones. Has anyone been through this, I imagine it's some little nuance that I am missing.
I've currently got Ubuntu server configured so that clients can login using LDAP user accounts that I've created using ldapadduser (from the ldapscripts package).
I've also got NFS exports working so that /home can be exported to clients. Kerberos authentication is enabled for NFS and clients require a nfs/clienthostname.domain principal to be able to mount the NFS share.
However, I now realise that for LDAP users to be able to access the mount they need their own Kerberos principal. If I run kinit dan@DANBISHOP.ORG then I can access /home/dan as user dan otherwise I get permission denied.
My question then is how best to proceed... is there a way to configure the client/server so that once a client has mounted the nfs share using Kerberos, all users can access it without their own principal?
It seems more usual to create kerberos principles for all users, but then how does one manage users? Using ldapscripts is very easy, but if the admin then has to manually create kerberos principals everytime, it could become very tedious. Furthermore how do users change their password if kerberos is used for authentication?
I need to configure the DNS server and Ldap server in ubunru 10.10.
View 1 Replies View RelatedI've got 8.10 of Ubuntu and currently running openLDAP and have SAMBA domain using this along with the PAM changes on all machines to authenticate the logins.Now I've got a situation where I need to change the organization it currently is dc=mycomp, dc=local and I need to change the "local" part.
I thought that I could slapcat it out then change all dc=local to dc=blech and then reload the LDAP database. Then go around and change all the ldap configuration points to match.I don't think its as simple as change the base dn and everything below that will update.
I've just installed Ubuntu Server for the first time with the goal as setting it up as a proxy server for our Apple computers here since I can get neither ISA of OS X Server's firewall to play properly. So far I have the machine authenticating against our OS X OpenLDAP server and multiple NIC's setup ready to be connected to the outside world. My question is does anyone have a preference on what proxy I should be using? So far my search efforts seem to of turned up Squid Proxy as a favorite among Ubuntu users but I can't seem to work out how to get it authenticating against my OpenLDAP server.
View 5 Replies View RelatedMy scenario is based on Ubuntu server guide, can be found at [URL].. Step 1: I do as chapter 6, install OPENLDAP server, populating LDAP => run ok. Step 2: do as LDAP Authentication section => run ok. Step 3: Install samba => ok. Step 4: do as OpenLDAP Configuration section => there's a problem here: when I run the command:
Quote:
ldapadd -x -D cn=admin,cn=config -W -f /tmp/cn=samba.ldif.I can't login to LDAP server, it said that:
Quote: ldap_bind: Invalid credentials (49)
I am sure that the password is correct, but I still receive this message
Ldapscripts seems to be authenticating oddly but I am not sure why. Running 'ldapadd' works without issue:
<code>root@domainator:~# ldapadd -D cn=root,dc=example,dc=home -W
Enter LDAP Password:
<CTRL-D>
root@domainator:~#
</code>
However:
<code>
root@domainator:~# ldapaddgroup test
>> 01/03/11 - 22:16 : Command : /usr/sbin/ldapaddgroup test
ldap_bind: Invalid credentials (49)
ldap_bind: Invalid credentials (49)
Error adding group test to LDAP
Error adding group test to LDAP
</code>
Here's various parts of my /etc/ldapscripts/ldapscripts.conf:
<code>
SERVER="domainator"
BINDDN="cn=root,dc=example,dc=home"
BINDPWDFILE="/etc/ldapscripts/ldapscripts.passwd"
SUFFIX="dc=example,dc=home" # Global suffix
GSUFFIX="ou=Groups" # Groups ou (just under $SUFFIX)
USUFFIX="ou=Users" # Users ou (just under $SUFFIX)
MSUFFIX="ou=Computers" # Machines ou (just under $SUFFIX)
GIDSTART="10000" # Group ID
UIDSTART="10000" # User ID
MIDSTART="20000" # Machine ID
</code>
/etc/ldapscripts/ldapscripts.passwd permissions are root:root, 0400 a
And I have quadruple checked my password is correct. Is there a way to print out debugging from ldapscripts so I know what commands it is generating?
i am taking another stab at this. The last time i attempted it, it seemed like everyone had a different way to do it, but nobody could give me an answer on how to do it...
I currently have a Domain Controller Running sme server and a domain controller, using ldap as a backend. I have two file servers runing ubuntu 10.04. My overall goal is to have it so when i create a username on the domain controller, it is then automatically copied over to the fileservers. This way everyone will have their own username and password to access the fileservers and ill be able to track what people do on the fileservers.
The next necessity is for me to be able to apply permissions to the folders on the fileserver based on the users that are created on the domain controller.