Ubuntu Servers :: MAC OsX Client Cannot Mount Samba Protected Share?

Jan 12, 2010

I recently set up a Samba server (Ubuntu 8.10 desktop) in a Social Businness Office. in there have different laptops and OS.

Here is how my smb.conf file look in the share section.

[private folder]
path = /path/to/private
comment = private
valid users = user1 user2
directory mask = 0777

[Code]....

It work fine for Win and Ubuntu, but access this folder with Mac OsX gives this error:

smb_mount: open session failed!: syserr = Broken pipe

It seems that authentication is ok, but for some reason it cannot mount the device.

I know this is not the right place to talk about OsX issues.

I would like to exclude if there are some options I miss in the smb.conf.

View 4 Replies


ADVERTISEMENT

Networking :: Configure Nfs Mount Disk To Samba Share For Windows Client ?

Nov 8, 2010

I am not able to configure nfs mounted disk for shareing samba. i have a server X. which configure samba for windows XP client this is done. now i have export X server samba share disk to mount Y server using nfs. this is mount and ok. but i don't share this disk using Y server samba configure.

View 2 Replies View Related

Fedora Servers :: Failed To Mount Share On Client

Jan 23, 2010

Setting of my NFS as following and I am failed to mount client and get connected the both computer using Fedora 11; server ~(tower) and client (note book)

NFS Server setting ...
root@tomcat shylock_1]# cat /etc/sysconfig/iptables
# Firewall configuration written by system-config-firewall
# Manual customization of this file is not recommended.
*filter .....

Please make note selinux demon has been disabled.

On Client Side:
file : /etc/exports EMPTY
file : /etc/hosts.allow EMPTY
file :/etc/hosts.deny EMPTY
[root@eagle shylock_1]# cat /etc/sysconfig/iptables
# Firewall configuration written by system-config-firewall
# Manual customization of this file is not recommended.
*filter .....

After making several attempt I cannot mount share on client. What I am missing here? OR is there problem with F11 with NFS server? While throwing everything including sink... I ran tcpdump on server while issuing mount command from client; I got following tcp dump.

01:14:57.142977 IP eagle.xxxxx.co.uk.38684 > tomcat.xxxx.co.uk.sunrpc: S 593790635:593790635(0) win 5840 <mss 1460,sackOK,timestamp 38407834 0,nop,wscale 6>
01:14:57.143033 IP tomcat.xxxxx.co.uk > eagle.xxxxx.co.uk: ICMP host tomcat.xxxxx.co.uk unreachable - admin prohibited, length 68
01:15:02.142293 arp who-has eagle.xxxxx.co.uk tell tomcat.xxxxx.co.uk
01:15:02.142431 arp reply eagle.xxxxx.co.uk is-at 00:10:a7:04:d0:0d (oui Unknown)

Which reflect that client (computer - eagle) trying to make call on Server - tomcat but failing. We have a router which also server DHCP Server and issue IP but server has static IPs.

View 2 Replies View Related

Ubuntu Networking :: Samba Share : Get An Error Message "unable To Mount Location, Failed To Mount Windows Share"?

Jan 22, 2011

I have installed ubuntu 10.10 and the Samba addon to configure my shares to my Windows terminals.This is what I got

Firewall off (utf disabled)

Internal Sata /dev/sda1 (EXT4 FS)

External USB HDD /dev/sdb1 mounted at /media/SG1500GB (EXT4 FS)

I have two shares

1. //home/test - Which I can see and access with no problems (can't write to it though even though I set the share as writable?, but, I can read from it). This is available to everyone. My windows terminal can see this folder and access it. This is on my main 80GB internal drive /dev/sda1.

2. //media/SG1500GB/Music. I set this up for everyone full access and I can see it at all my Windows machines but,I can't get into the folder. Windows keeps giving me an error stating network path not found.I also try to access it via the Nautilus (Places/Network/system/music) and get an error message "unable to mount location, Failed to mount windows share". This drive is mounted per the disk utility.

View 4 Replies View Related

Networking :: Samba Configuration - Cannot Mount Samba Share

Apr 26, 2011

Start>Run>\192.168.0.1storage gives me "The specified network password is not correct." It lists my domain as "ANTEC" which is the name of my computer, though I've changed the workgroup to WELLS. I've run:

setsebool -P samba_domain_controller on

Trying to connect to samba locally gives me this:

Code:

[tedward@hp-firegate ~]$ smbclient //192.168.0.1/storage -Utedafur
Password:
session setup failed: NT_STATUS_LOGON_FAILURE

[code]....

View 6 Replies View Related

Ubuntu Networking :: Samba And External Drive - Unable To Mount Location - Failed To Mount Windows Share - Dialog Box

May 25, 2010

I have been trying to share folders from my main PC which is running Ubuntu 10.04. I have been able to figure out Samba enough to get my a couple of folders shared, but I have been unable to share any folders which are on my external harddrive. After entering the path in my smb.conf file they appear on the network but I am unable to navigate to them. When trying to navigate to them through the network folder on the pc they are actually connected to I get an "Unable to mount location: Failed to mount windows share" dialog box. On the windows pc I am trying to share with I get, "Windows cannot acces \Josh-Desktop
ame of folder"

My smb.conf file looks like this:

That folders I cannot access are Music and Videos.

View 9 Replies View Related

Ubuntu Networking :: Unable To See Samba Share From Client Machines?

Feb 15, 2010

I just set up an ubuntu 9.10 server (no desktop environment, command line only) and I'm unable to see my samba share. I followed these instructions. Here are the relevant parts of my smb.conf file: Quote:

workgroup = JASONGROUP
# I un-commented this
security = user

[code]....

View 9 Replies View Related

Ubuntu Networking :: Samba Client - Failed To Retrieve Share List From Server

Apr 15, 2010

I have been using Ubuntu sense about 6.10 and never had to network with a Windows computer before. I have a decent understanding of Linux itself but I am having issues with this samba client. I have a clean install of Ubuntu 9.10 and am trying to use samba to access my shares on a Windows XP(SP3) computer. I am on the network just fine, and all the computers on the network have static IP addresses. When I go to Places->Network->Windows Network I see the "TITANNET" workgroup, (Even before I changed my workgroup to "TITANNET" in the smb.conf file.), but when I try to access it I get this error:

Code:
Unable to mount location
Failed to retrieve share list from server.

P.S.[0] I tried using /etc/init.d/samba restart but it did not work, I am not sure I am even running the samba server. (Well, it is obvious I am not, what I really mean is what am I running to (not =D)access the shares on my Windows PC.)
P.S.[1] I know that this has probably been posted before. I have searched and searched, I am about 1.5 pots of coffee and 4 hours into this.

View 2 Replies View Related

Ubuntu :: How To Mount A Samba Share

Dec 11, 2010

I need to mount two Samba shares from my Ubuntu Server to my Desktop they are:

[shared]
path = /media/share
read only = no
guest ok = yes
[www]
path = /var/www
read only = no

I made two directories in my home folder on the desktop called share and www how do I mount these now? I have to use the terminal btw.

If I run the command: smbclient -L //192.168.10.101 which is the IP of my server it works.

View 1 Replies View Related

Software :: Unable To Connect To Samba Share (XP Client, RHES5 Server)

Nov 19, 2008

OS:
Red Hat ES 5.2

Kernel:
2.6.18-92.1.18.el5

Samba version:
[root@intranet samba]# rpm -qa |grep samba
system-config-samba-1.2.39-1.el5
samba-common-3.0.28-1.el5_2.1
samba-client-3.0.28-1.el5_2.1
samba-3.0.28-1.el5_2.1

When I try to connect to the share from my XP machine, I get a "network path cannot be found" error message.

Below is the entry in /var/log/samba/samba.log

[2008/11/19 11:57:51, 0] smbd/service.c:make_connection_snum(1003)
'/server2/test' does not exist or permission denied when connecting to [server2] Error was Permission denied

Here is my smb.conf file:

[global]
# Server name
server string = Intranet Server (Primary)

# These are the default password settings.
; encrypt passwords = yes
; smb passwd file = /etc/samba/smbpasswd

# Define NT domain/workgroup name.
workgroup = intranet

# Security mode. (See SAMBA documentation for details.)
; security = user

# Restrict conections to specific IP addresses.
hosts allow = all

# The %m variable sets a separate log file for each
# connecting machine.
# log file = /var/log/samba-log.%m
# Keep it basic - one file!
log file = /var/log/samba/samba.log

# The number of minutes inactivity before a connection is
# disconnected. (This disconnection should be transparent to most
# clients, which an have auto-reconnect feature. Removing inactive
# connections is to preserve the server's resources.)
deadtime = 10

# These socket options are suggested in the default smb.conf file.
# Who am I to disagree?
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192

# Define both Ethernet interfaces. (Otherwise, I suspect only one
# will be configured??)
interfaces = eth0 eth1
username map = /etc/samba/smbusers
; guest ok = no
; guest account = nobody


[server2]
comment = server2
path = /server2/test
write list = @intranet
force create mode = 775
force directory mode = 2775
writeable = yes
; browseable = yes
valid users = intranet

/server2 and /server2/test are owned by user intranet and both directories have permissions set to 777.

Has anyone come across this problem in the past?

View 3 Replies View Related

CentOS 5 Server :: Openvpn Connect To Samba Share From Windows XP Client?

Sep 15, 2009

I'm trying to set up a VPN connection between our CentOS 5.3 server at work and my bosses XP computer at home. At this point, we are kinda locked into Quickbooks. I'm testing the connection from my XP boot at home to see if it works. I can log into our servicemanuals easily enough from XP at home however, the windows takes forever to update. I have the Samba server only listening on port 445 because is seems to work more efficiently at work. I connect to the Samba shares via linux from home and everything works well but, when I try to do anything with the shares from Windows client at home, it's very slow!

I'm thinking that it must have something either to do with the Windows OpenVPN client or the client.conf file. Is there anything I should look at in the .conf file for answers?

View 1 Replies View Related

Ubuntu :: Mount A Samba Share Form Another Pc?

Feb 8, 2010

I want to mount a samba share form another Ubuntu pc.

With nautilus I can do: smb://xxxxxxx;username@192.168.1.12/sharedfolder/ And i can browse the shared folder without problem

but I want to mount it. I have tried:

Code:
user@compu:~$ sudo mount -t smbfs //192.168.1.12/sharedfolder /mnt/folder -o username=username
mount: wrong fs type, bad option, bad superblock on //192.168.1.64/esco3,
missing codepage or helper program, or other error

[Code].....

Im aware I'm not passing the password and I was hoping it would ask me. Also I'd like to store all that info in my computer and try to auto mount the shared every time i use the pc.

View 3 Replies View Related

Ubuntu :: Auto Mount A NAS Samba Share

Jan 13, 2011

One problem I'm having is with getting some apps to access NAS hosted files and folder over samba. Two examples are photo managment apps and backup apps, which seem to only want to work with local files and folders.I have come across a number of articles about cifs, autofs, gigolo, fstub, etc (including the autofs community documentation). But so far I've had no luck in auto mounting a samba shared resource as local.

Can anyone point me to a definitive tutorial, or provide an explanation on how I might accomplish auto mounting samba shares?

View 7 Replies View Related

Networking :: Share A NFS Mount With Samba?

Apr 21, 2010

Can I share an NFS mount with samba?

Scenario:

ServerA has an NFS Mount to ServerB at mount point /home/qlogger/logs

I can cd to /home/qlogger/logs on ServerA and see the contents as they would be on ServerB (NFS Working with proper permissions rw).

I have a samba share setup on ServerA to share the NFS Mounted Directory (/home/qlogger/logs)

I connect with my windows host and am able to view the files and folders. I can create folders just fine however; when I go to copy a file from the windows machine to the samba share I receive a message saying the file is locked.

I have disabled oplocks in samba and the problem still persists.

View 1 Replies View Related

Ubuntu :: Samba Share Mounting - From 'mount' To Fstab

Mar 21, 2010

I have a command line that mounts the disk of my mobile

Code:

It works, but there is a problem with it. Every folder and file has root:root ownership, so I am unable to change anything. Even when I change permissions manually, it does not work.

Now, I want to move this to fstab but have no idea how an fstab line should look like. Obviously, I want to also have rw access to the disk.

View 7 Replies View Related

Ubuntu Networking :: Permanent Mount Of A Samba Share (10.10)?

Oct 10, 2010

I have sent the last 5 hours (it is now 6am) and I am in no mood for lazy know-it-all'sI have returned begging and crawling back to Ubuntu (I waited a day for 10.10 to be released) and I have again stumbled across why I go back to Micro$oft's Windows.All I want to do it have a permanent share to my nas, which is on my Netgear DGND3300.I can reach it by Place -> Network -> Windows Network -> NAKALEEN -> NAS -> USB_Storagebut for the life of me I can't make it permanent. I need it as all my Movies/TV/eBooks are on this.I have followed every and I mean EVERY option I have found on Google with no luck. From the fstab/mount option to the gvfs option (as you can guess both failed)The reason it is *$&^%$^&%$ me off it that Windows can do it with a couple of mouse presses (Map Network drive). Making Ubuntu a joke in this area.

View 9 Replies View Related

Red Hat / Fedora :: Mount Samba Share To Windows?

Aug 31, 2010

i hav configured samba share in RHEL 5.4 , it can be accessable from other linux machine but i want to access it from windows machine, how can i do it? i also want want to know that in RHEL my partitions are in ext3 format, so how can windows can detect this partition, Is samba share is independent of filesystem on either machines

case2:---
i hav configured samba on windows server 2008 , how can i mount it on linux machine

View 9 Replies View Related

Server :: Mount A Win-share On Debian Using SAMBA?

Jan 6, 2010

"My network" is behind a firewall inside a larger windows network with AD. My network has a Debian Server with samba 3.2 running. There are 50 users on my server. Users has accounts on the win-server, but is only using this to read mail. How do I mount a windows share on my Debian server in a way that all my users can read and write there?

View 3 Replies View Related

Server :: Unable To Mount Samba Share

Nov 11, 2010

I've began to work on getting my access control, set up properly on my server, and want to create a "my documents" folder for each user I add. I do not want it being part of the home directory and have read everything and still can't seem to get it to work. I've got a second drive that is mounted at /private on my server, with a folder that is underlying on it call users and groups. Then from there is has the exact unix username that I set up in Users and Groups. Ex. /private/user/gary . With Samba, I added the following code:

Code:

[My Documents]
guest ok = no
comment = %u's Documents

[code]....

I've tried using %u,%U,%S, and the normal username and of all of them, it will only work with the username. I've even used force user. added root to the valid users list and it still gives me access denied or the multiple connections to a single share with multiple user names prohibited but nothing is mounted on this share. On Webmin, it doesn't show any connections to the share. I'm rather at a stumped state in which is frustrating me, because I want to have this so when I go from my desktop to my laptop I have "My Documents" On either unit. Security on the server is set to User because I've searched to see if I can't find a way to make shares visible by a guest but read only to them and when I access them from my log in to make it read write using the "Share" option.

View 9 Replies View Related

CentOS 5 Networking :: Can Use Samba Share But Cannot Mount It

May 27, 2010

I am trying to mount a file server directory on a client machine. I tried using NFS, but could not mount the share on the client. Several respobses were given to a post on this problem. but I still was not able mount the NFS share. I decided to try instead to mount the directory as a Samba share because I can already access it using Samba from windows, or from KDE or Gnome using smb://fileserver as a desktop location icon URL. When I try to mount the Samba share I get error messages that nearly identical those that occurred with NFS. . Here are some of the setup parameters

CentOS 5.4 on client and server behind a D-Link router
server IP: 192.168.0.44 (can ping it client)
client IP: 192.168.0.101 (can ping from server)

[code]....

This is the only error message that these commands have produced in the messages log, secure log or smbd log for either machine. My immediate goal is to set up the simplest possible local mount that will allow Grsync to backup to the file server.

View 4 Replies View Related

Ubuntu Networking :: Mount A Samba Share To Access It From A Terminal?

Feb 3, 2010

I am trying to properly mount a samba share in order to access it from a terminal and run a script that I've written over a folder in the share. How could I do that? I tried smbclient but after successfully logging in I couldn't issue the sh command. Isn't it possible to have it mounted in the /mnt folder like a normal filesystem?

View 1 Replies View Related

Ubuntu Networking :: 10.04 Unable To Mount Samba Version 3 Share?

Aug 3, 2010

I've just loaded a laptop with Ubuntu 10.04, and I am unable to mount a samba share from an older Red Hat server. The problem first occurred when I tried using "Places -> Network" or "Places -> Connect to server", and the server's log gives me something like this

[2010/08/03 15:40:38, 1] auth/auth_server.c:check_smbserver_security(363)
password server 10.100.1.2 rejected the password: NT_STATUS_LOGON_FAILURE
[2010/08/03 15:40:38, 2] auth/auth.c:check_ntlm_password(319)

[code]....

View 2 Replies View Related

General :: Mount Remote Samba Share In Fstab?

Nov 19, 2009

Server: Ubuntu Server Edition 8.04
/currently firewalled to only allow client ip
Client: Ubuntu Desktop 8.04
/currently firewalled to only allow server ip

Same userid and groups set up on on both. I have taken two linux courses and can maneuver around fairly well, but am still pretty newbie at all this. We have loaded Samba on a server and created a Samba share. I AM able to access that share via Windows Vista, but have not been able to successfully mount the share on the Ubuntu desktop via the fstab file. I have tried the following ways: serverip:/path/shareddirectory /net ext3 user,sync 0 0 and the samba way..

//serverip/sharename /net smbfs username=x,password=x

After modifying fstab, I reboot. No luck since that either way.Only ONCE after modifying it samba way, I was prompted to enter credentials, but after login I was unable to view the files on the server. From this point on either way, if I run commmand 'mount -a' the response is "Special device serverip:/path/sharedirectory does not exist" Also! I am able to ping client-to-server, but not server-to-client.

View 3 Replies View Related

Server :: Mount Samba Share On Windows Permanently?

Jul 7, 2010

Client OS :- Windows XP
Server OS :- Centos 5.4
Service :- samba or smb

Actually i want to take a back of windows xp's users data which on d: or etc and that backup i want to store in samba share which i made on my centos 5.4 . To do this we need to mount samba share as local drive then any script or any software can detect that share easily in that drive.

View 4 Replies View Related

Server :: Unable To Permanently Mount Samba Share

Nov 13, 2010

my samba server is working properly but i want to mount it permanently on linux (red hat) client.i have tried /etc/fstab and also autofs service but both are not working for me.

1. /etc/fstab i made the following entry in it //192.168.0.254/myshare /temp smbfs credentials=/root/pass 0 0 and when i use comman mount -a it shows "unknown filesystem smbfs" why this is so?

2. using autofs

my auto.master file is shown below

#
# $Id: auto.master,v 1.4 2005/01/04 14:36:54 raven Exp $
#
# Sample auto.master file

[code]....

View 13 Replies View Related

Ubuntu Servers :: Share Internet Connection To Client Using NAT

Jul 19, 2011

I am back to the same issue internet connection sharing using NAT .I use the following command it work for me for an hours.

Code:
sudo iptables -A FORWARD -o eth0 -i eth1 -s 192.168.0.0/24 -m conntrack --ctstate NEW -j ACCEPT sudo iptables -A FORWARD -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT sudo iptables -A POSTROUTING -t nat -j MASQUERADE

Code:
sudo iptables-save | sudo tee /etc/iptables.sav
Edit /etc/rc.local and add the following lines before the "exit 0" line:

Code:
iptables-restore < /etc/iptables.sav

Code:
sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward"

After restarting my server NAT is not working .client system can ping to my server through the server's eth1 ip but Internet is not accessible to the client pcs.

View 2 Replies View Related

General :: Root Can't Chown Mount Point For Samba Share?

May 30, 2010

I have a samba share that I mount locally at boot through fstab. The share is writable and if I access the share directly, say with konqueror and smb (smb://hostname/sharename) then I can do anything I want (create, write, delete, edit, files/directories). I have a mount point on my local machine

Code:

/shares/mp3

and I (username dtest) was unable to do anything except read files and create directories trying to do them to the local mountpoint except as root. I figured it would be a matter of

Code:

chown -R dtest /shares/mp3

but I was unable to do that even as root, I kept getting permission denied. When I did

Code:

ls -alt /shares/ it told me the owner was 1000 and the group was root. Dtest was already a member of the root group and I was able to

Code:

chmod -R 774

as root but I still couldn't do anything except read and create directories directly via the mountpoint. Ultimately I solved this by changing the uid of user dtest via kuser and then just chowning my home directory back to dtest. It seems like as root I should be able to change the owner of the directory. I know it's because this is a samba share, but it doesn't make any sense why root couldn't just chown it. Is there another way to change the owner of a directory, or is this set by the machine hosting the samba share?

View 3 Replies View Related

General :: Unable To Mount Samba Share, DBus Error

Apr 14, 2010

Today when I try to mount a samba drive on my Ubuntu 10.04 server, which worked before, I now get the error message below:

DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus)

Any ideas is much appreciate.

View 1 Replies View Related

Ubuntu Networking :: Mount Samba Share - Connect - Read And Write From Other Apps

Mar 9, 2010

I have a networked raid drive. Thecus 2100. Its running linux, and includes samba sharing. On that I have a folder shared. I can connect to and read and write from nautilus. No problems. However, I can't use other apps through that method. Its not really "mounting" that drive in the sense you'd normally think of (afaik).

If I try to mount the folder, no matter how I have tried so far (-t cifs, smbmount, etc), I can navigate the folders, but if I try to read any file I get a permission error. Looking at the permissions with 'ls -l', everything looks OK. The weird thing is, I can write a file, then read that file back as long as its the same session.

Just now I tried 'smbclient' with no special arguments. Just the server and path url. It asked for my password. Once I was in, I had no trouble getting files. I had a thread about this a while back and there were several links and all sorts of command line options to try, which I did, with no different outcome. I think its got to be something much simpler and more obvious. smbclient and nautilus seem to have no trouble. Anybody know what they're doing differently?

View 5 Replies View Related

General :: Httpd Virtual Host Set To Mount To Samba Share Folder?

Dec 23, 2010

The scenario like this. I'm working on Ubuntu 10.10. I've enable samba sharing with full guest access enable. In my office I had another server (CentOS 5.5) installed just for me and I've created a Apache VirtualHost which root document pointed to share folder on my comp

This is my fstab setting
//my ubuntu computer name/sharing/www /media/www cifs context=system_ubject_r:httpd_sys_content_t:s0,username=username,password=******,iocharset=utf8,fi le_mode=0777,dir_mode=0777 0 0

After label the mount folder as httpd_sys_content_t the Apache web server working in correct way (duno much but at least it can index files and excute some php code so) then the troll come in : if some file was created by my ubuntu (personal comp) then the file would be listed in Apache virtualhost correctly.

But if I'm ssh to CentOS server goto /media/www which was mounted to my unbuntu computer. Then type command like $mkdir something Suprising that folder ./something could not be accessed by Apache anymore except I remount by umount and mount it again or "setenforce 0" What is wrong with my system can anyone point me out of this headache

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved