Ubuntu Servers :: Installing 10.04 Into OpenVZ As Guest?

Apr 25, 2010

Anybody know how to upgrade 9.04 to 10.04 on the OpenVZ VE?

I tried to update system via dist-upgrade and scripts stoped on plymouth and upstart-udev-bridge proccess I had remove plymouth* and upstart-udev-bridge.conf from /etc/init/ but other proccess (such as /etc/init/ssh) does not start.

How to fix upstart or add sysinit (old /etc/init.d) support?

View 5 Replies


ADVERTISEMENT

Ubuntu Servers :: /etc/network/interfaces Doesn't Set IP Address With OpenVZ?

Jun 4, 2010

I'm building up a server based on 8.04 LTS. It's using OpenVZ, and as part of that it creates a virtual network interface venet0. I add a stanza to /etc/network/interfaces that looks like this:

Code:
allow-hotplug venet0
iface venet0 inet static
address 10.53.35.1
netmask 255.255.255.0

[Code].....

Looking further, I note that /etc/init.d/networking is not symlinked into anything other than the rcS.d directory. It's been a while since I've been tinkering at this level, but I understand that there should be a symlink from rc2.d/Sxxnetworking into ../etc/init.d/networking. So I wonder where eth0 is getting configured.

View 2 Replies View Related

Ubuntu :: Installing Guest Additions To Kubuntu Guest?

May 24, 2010

i've installed kubuntu 10.04 on a sun virtualbox , and when i tried to install the guest additions i got this error in the terminal:

Building the VirtualBox Guest Additions kernel modules. fail ! (Your system does not seem to be set up to build kernel modules. Look at /var/log/vboxadd-install.log to find out what went wrong) i'am running windows 7 as a host operating system .

View 1 Replies View Related

Ubuntu Servers :: Install The Guest Additions For A VM Running A Guest Lucid Lynx?

May 11, 2010

I'm trying to install the Guest Additions for a VM running a guest Lucid Lynx Server. The problem I'm encountering is this: The vboxadd-install.log for vbox says it "couldn't find the sources of your current Linux kernel" and to "Specify KERN_DIR=<directory> and run Make again."

View 4 Replies View Related

Fedora :: Installing Guest Additions Virtualbox 13 Guest?

Jun 3, 2010

I had a lot of trouble installing Guest Additions within the Fedora 13 Guest on a Linux host. I had to mount the vboxGuestadditions.iso from the Device --> CD/DVD Devices menu. Then I located the appropriate package for my system. In my case it was the AMD64 Linux version.I ran this as administrator in Terminal. I used the "bash" command followed by the package name. This was after CDing the the appropriate directory. The packaged installed, I then rebooted and it worked fine. (Something that would make this easier is to load a script into nautilus that would allow me to open a locatation as administartor at the open window. I'm sure there is something in Fedora to do this but I couldn't find it in a hurry so I used the command line way).

View 5 Replies View Related

Ubuntu :: Installing Guest Additions In Virtual Box?

Oct 12, 2010

i have installed ubuntu 10.10 on Virtual box and now am trying to install guest additions as shown [URL].Problem is when i type into the Terminal "cd /media/cdrom" it replies with "No Such File or Directory"

View 1 Replies View Related

Server :: Install Openvz On Centos 5.4 64 Bit ?

Mar 23, 2010

i want know how can install openvz on centos 5.4 64 bit ?

i'm try with defualt steps on centos 5.3 32 but not working

the server working on 16 gb ram

View 1 Replies View Related

CentOS 5 :: Minimal 5.5 X86_64 Install To Run OpenVZ

Jan 27, 2011

Looking at the various OS image download options, I see that I need to download/burn 8 ISO images for CentOS5.5 x86_64. Trying to see if it is at-all possible to avoid downloading/burning all 8 CD's, and make-do with the 1st one alone. My target platform is a commodity desktop running AMD AthlonII X2 250, with dual-channel 4GB DDR3 @1333MHz, and 500GB 7200rpm SATA (no RAID, SW or HW).

I read in another forum post that for minimal install without X, the 1st CD should suffice. Is this correct ? While I do not expect this forum to answer OpenVZ questions, but if someone happens to have experience in installing OpenVZ on such a system, how much extra I might have to download online, to get the system functional.

The guestOS in the OpenVZ partitions would be a mix of CentOS5.5 64-bit and 32-bit, and few running Ubuntu 10.04.1 32-bit. I am told that this is possible. Effectively it means I'd need the (pseudo?) 32-bit library support.

View 2 Replies View Related

Fedora :: Installing VBox Guest Additions On F11

Oct 20, 2009

Getting this error message and can't get by it........

Problems were found which would prevent the Guest Additions from installing.

View 2 Replies View Related

Fedora :: Installing VMware Tools In 12 Guest?

Feb 5, 2010

[There are quite a few outdated guides relating to older versions of Fedora, so I figured that I'll write it up specifically for Fedora 12 to make life easier for others]

This guide is based on a fully patched Fedora 12 distribution as of Feb 5 2009.

A default install of Fedora 12 as a VMware Image (Guest) will generally fail to install VMware Tools for the following reasons (In the Fedora 12 Guest Image):

1. GCC and related packages are not installed

Make sure that 'yum list gcc*' has at least the following packages installed (these are not installed by default unless you select developer configuration).

[root@localhost ~]# yum list gcc*
Loaded plugins: presto, refresh-packagekit
Installed Packages
gcc.i686 4.4.2-20.fc12 @updates
gcc-c++.i686 4.4.2-20.fc12 @updates

2. Correct kernel-devel packages are not installed. This generally manifests itself via the following prompt:
'What is the location of the directory of C header files that match your running kernel?'

Fedora 12 installs kernel-PAE by default instead of the normal kernel rpm for the i386 distribution. Consequently, the header files required by vmware-config-tools.pl are found in 'kernel-PAE-devel' and not 'kernel-devel'.

[root@localhost ~]# yum list kernel*
Loaded plugins: presto, refresh-packagekit
Installed Packages

[code]...

The symlink /lib/modules/2.6.31.12-174.2.3.fc12.i686.PAE/source should work if the correct kernel-*-devel package is installed. vmware-config-tools.pl seems to only check this link to determine if it has found a legitimate kernel header directory.

View 4 Replies View Related

Fedora :: Installing VMware Tools In 13 Guest?

May 26, 2010

I'm trying to install the vmware tools in Fedora 13. I've run the following commands as root:

yum install gcc -y
yum install kernel-devel -y
./vmware-install.pl
...

when it asks for the location of the directory of the C header files that match my running kernel I entered:

/usr/src/kernels/2.6.33.4-95.fc13.i686/include

but vmware-install.pl says:

The path to "/usr/src/kernels/2.6.33.4-95.fc13.i686/inc" is not valid..

View 14 Replies View Related

Fedora :: 14 - Does Not Boot After Installing Guest Additions

Jul 23, 2011

When I installed Guest Additions Fedora 14 will not boot anymore.

While booting I get the message:

View 1 Replies View Related

OpenSUSE :: Installing VirtualBox Guest Additions In 11.3 VM

Feb 28, 2011

I'm trying to install the Virtual Box Guest Addition for my openSUSE 11.3 VM, but I'm having some problems. The Virtual Box manual says I need to install the kernel-default-devel package, so I did that, but it also says :

Make sure that your running kernel (uname -a) and the kernel packages you have installed (rpm -qa kernel*) have the exact same version number. Proceed with the installation as described above.So I ran both commands and here is the output :

edgar@linux-t7uc:/> uname -a
Linux linux-t7uc 2.6.34-12-default #1 SMP 2010-06-29 02:39:08 +0200 i686 athlon i386 GNU/Linux
edgar@linux-t7uc:/> rpm -qa kernel*

[code]...

the devel packages are version 2.6.34.7-0.7.1 and the kernel is version 2.6.34-12. How do I install the correct version of the kernel-default-devel and kernel-devel package with zypper? I thought maybe the versions could be compatible somehow, so I tried to install the Guest Addition and here's the result :

edgar@linux-t7uc:/media/VBOXADDITIONS_4.0.4_70112> sudo sh ./VBoxLinuxAdditions.run
root's password:
Verifying archive integrity... All good.
Uncompressing VirtualBox 4.0.4 Guest Additions for Linux.........

[code]....

View 3 Replies View Related

Fedora X86/64bit :: Error - Installing Guest Additions On 14

Jan 13, 2011

Error " unable to build kernel module " see the log file /var/log/vboxadd-install.log for more details.

View 8 Replies View Related

Fedora :: Installing Virtual Guest On FC13 Host

Jun 26, 2010

FC13/KDE
How do I make a Guest img on hard drive and install Guest on a FC13 host? Is there a set of instruction for doing it on a FC13 host? I went to this website for the FC13 KVM instructions, but near the bottom of page 1 he starts off with making a Guest, Debian Lenny, on ubuntu. Chapter 4 Creating A Debian Lenny Guest (Image-Based).

He has got me so confused at this point on whether he is installing a Fedora or Ubuntu Guest. On that 1st page all steps for making a Host is completed on my Host computer. [URL]. I have got the Windows XP disk in the CD ROM ready to go. If you do a Google search on KVM. Any prior instructions just does not work for Fedora 13

View 2 Replies View Related

Ubuntu Servers :: VMWare Guest - VFS Unable To Mount

Jul 21, 2010

I've built a customized 2.6.32 kernel over Ubuntu 10.04 server (physically) -note: it is the same version that comes with the livecd-. Then I added my stuff, cloned the disk, applied it to 3 different hardware boxes and it works perfectly. But when I put that image on a VMWare Workstation 7.1 or VirtualBox machine it doesn't load... I get a "kernel panic: not syncing vfs unable to mount root fs on unknown-block 0,0". So, I've created a new vm, I've installed ubuntu and it booted without a problem.

I ran my kernel patching as I did on the physical machine, but when I rebooted with the new kernel, I got the same error. So, the problem seems to be something in the customized kernel, but specifically going over virualized copies. By the way - In a previous version, specifically Debian 5 with kernel 2.6.18, I did the same stuff about a year ago and the machine loads perfectly in any virtualized environment. Then, the only thing left to think about my problem is that some grub parameter or kernel driver or something is messing up with booting. The customization of the kernel is only the patching for IMQ stuff.

View 5 Replies View Related

Ubuntu Servers :: Getting Virtualbox Guest VM To Start On Boot?

Mar 29, 2011

I'm running the host server on Ubuntu 10.04 LTS (64bit) . I'm using virtual box. I want to automatically for one of the guest vritualboxes to start on reboot. Following is already done without a success. Please help me in solving this.

1. I have created the following shell script
#!/bin/bash
/usr/bin/nohup /usr/bin/VBoxHeadless --startvm "VMNAME" 2> /dev/null &

2.From the current logged on user I did a crontab -e and did the following

crontab -e @reboot /bin/sh /home/myaccount/shellscript.sh note that I do not encrypt the home directory and sufficient permissions are there.

View 9 Replies View Related

Ubuntu Servers :: Connecting To A Shared Folder - From The Terminal On Guest?

Feb 11, 2010

I have Ubuntu karmic as my host OS and Ubuntu Server as a guest on Virtualbox. I have set a folder on my host as shared with the guest, but how can i connect to it from the terminal on my guest? I am also using webmin as i was trying to stay away from install a desktop

View 1 Replies View Related

Ubuntu Servers :: KVM On 9.10 Host And Guest - Internet Disconnects For Some Seconds

Feb 25, 2010

I run KVM on 9.10 host and guest 9.10. Both are x64. When I halt the guest os:
My host OS looses its connection with internet for 10-15 seconds and then it comes back on. Probably something goes wrong with default gateway, as it looses only external network (I still can reach it on my internal network). I've googled a lot, but cant find anything about that. I use bridged network.

View 4 Replies View Related

Ubuntu Servers :: X Forwarding - Access Via Ssh A Virtualbox Guest Machine?

Mar 29, 2010

host - ubuntu 9.10 desktop
virtualizer - VirtualBox

What will be the easiest way to ssh connect a VM on VirtualBox, exporting its desktop to host, while it is already running ? I found; Howto Access via ssh a Virtualbox Guest machine.

[Code]...

View 4 Replies View Related

Ubuntu Servers :: Cannot Ping Host From Guest Using Vmware Server 2 / Fix It?

Apr 25, 2010

Not sure if this post belongs here, but here it is.

Host: Win server 2003
Guest: Ubuntu server

Host: IS able to ping guest. Firewall is OFF. NOT able to access guest (which is a web-server) at browser.
Guest: NOT able to ping host. Running a web server, you can check the website: (pegajosa.com) is running under that virtual Linux server.

Problem: guest needs to access host's sql database and/or any resources.

Network: is bridged.

At the Linux box ifconfig -a code...

View 7 Replies View Related

Servers :: Access MySQL In Ubuntu Guest From WinXP Host?

Jul 3, 2010

I have Virtualbox setup

WinXP Host
Ubuntu 10.04 is the guest
Mysql is installed in ubuntu and it works fine in the guest (ubuntu)
Internet works fine in the host and the guest. Bridged Network.

Now, here is the thing... i want to access mysql from my host to load some data into it.

how do i access mysql from my host Win XP?

View 3 Replies View Related

Ubuntu Servers :: Basic Guest Samba Share No Worky?

Oct 18, 2010

I've been running Samba for a couple of years now. Bumped up from 9.04 to 10.10 server (64 bit), and nothing wants to work. I have a really simple share that I want to be accessible by all Windows clients without a login (guest access). Here is my config:

Code:
[global]
security = share

[code]....

View 3 Replies View Related

Ubuntu Servers :: Image-virtual: For Host Machine Or Guest OS?

Dec 2, 2010

I couldn't find a clear answer to this, but is the linux-image-virtual package for host machines that will contain VMs, or a VM-oriented kernel for guest OS (ubuntu)? I have some guest VMs running on Microsoft's Hyper-V, and was looking for some further optimizations.

View 3 Replies View Related

Fedora Servers :: Unable A Virtualbox Guest To Start At Boot?

Mar 27, 2010

Can anyone help me with how to create an init.d script that will startup a vm machine in virtualbox at boot? I found this script:[URL]..But it is for ubuntu. I am running fedora 12 x386 and using it as an Amahi server. Very cool, but it would be extra cool if I had a virtual windows machine startup when I booted up this server. Then I could just rdp into it when I needed something in windows.

View 3 Replies View Related

Fedora Networking :: Samba Guest Account With Password Of 'guest'?

Mar 16, 2009

I have a local file server running Samba on Fedora 9. It's already configured and serves a few people without any problems. I am now trying to set up a new read-only share with the username 'guest' and the password 'guest'. However, with no success so far! If I log on as 'guest' with the password 'guest' like so:

Code:

su - guest
No problem. Once logged in, if I try:

Code:

smbclient //samba/share

I'm prompted for a password. If I enter 'guest' I get:

Code:

session setup failed: NT_STATUS_LOGON_FAILURE

If I enter nothing (null) I get:

Code:

Anonymous login successful
Domain=[RIVER] OS=[Unix] Server=[Samba 3.2.8-0.26.fc9]
tree connect failed: NT_STATUS_LOGON_FAILURE

View 8 Replies View Related

OpenSUSE :: Virtualbox Guest Additions: Set A Shared Folder In 11.2 Guest

Mar 4, 2010

OpenSUSE installed in a Virtualbox Virtual Machine and I want to set a shared folder.

1 - Set up a Virtual Machine and install OpenSUSE 11.2

2 - Create a shared folder on host (HostFolder)

3 - Setup the shared folder in Virtualbox Via the Virtual Machine details or via Devices > Shared Folders...

4 - Install dependencies for running the Virtualbox installer You need to install the right development kernelpackage for your machinetype (use 'zypper search -i kernel' to see what's installed) sudo zypper make gcc kernel-source kernel-hosttype/default-devel

5 - Run the Virtual Machine and go to Devices > Guest Additions This mounts an iso image in your OpenSUSE guest.

6 - Open a root terminal and run

cd /usr/src/linux
make oldconfig && make prepare && make scripts && make dep
cp ../linux-obj/$HOSTTYPE/default/Module.symvers .
make prepare

* A commenter on previously mentioned thread says this step is unnecessary but it doesn't work without on my system. I suggest trying step 7 first and returning to step 6 if that fails. *

7 - Run ./VirtualboxLinux yourhosttype .run from the mounted iso image.

8 - Create shared folder in OpenSUSE (GuestFolder)

9 - Test with sudo mount -t vboxsf HostFolder /home/user/GuestFolder It works? Great! Let's set up the system so it automounts for your regular useraccount instead of root-only access.

10 - Add this line to /etc/fstab HostFolder /home/user/GuestFolder vboxsf defaults,uid=1000,gid=1000 0 0

11 - It works for me but if it still doesn't automount after a reboot; sudo mount -a

View 1 Replies View Related

General :: Install VirtualBox Guest Additions On Fedora 14 Guest?

Apr 3, 2011

I installed a Fedora 14 guest on a Fedora 14 host with Virtualbox, then i run these commands on the guest:yum install kernel-devel kernel-headersbut if i try to install the virtualbox-guest additions on the guest, is still complains about that it's unable to find the kernel source directory?Ha anyone succeded installing the guest additions on a guest Fedora 14?

View 2 Replies View Related

Server :: Run An Openvpn Server On A Openvz VPS - Packets Doesn't Reach The Client

Oct 23, 2010

I'm trying hard to run an openvpn server on a openvz VPS, the problem is packets sent from openvpn server process, doesnt reach the client, so connection is never stablished (I run tcpdump on server and wireshark on client to carefully investigate whats wrong), the first guess is that a kind of firewall is blocking traffic (I tried connecting to server through different ISP's but it's possible the national network provider applied some filtering but it cant be on IP,src port or dst port as I'd tried different configuration.

what about deep packet inspection technics, is it possible to block my traffic?) but at exactly the same time I can transmit UDP packets using netcat from server to the guest. there is no firewall enabled in between, I had tried, tcp and udp, tried both open vpn and openvpnAS and tried any thing one can imagine! the VPN is configured as a routed (TUN) type on debian

View 9 Replies View Related

Ubuntu Servers :: When Installing Server Ask About Installing DNS Server?

Jan 4, 2011

I am trying to install a ubuntu server to serve sites. More than one, so Ill use Apache VirtualHost.When installing ubuntu server ask me about installing DNS Server? do i need it?

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved