I have Linux server with cent OS.I have installed tomacat6.0 and postgresSQL8.3 on it.The thing is i wanna know whether the tomcat and postgresSQL is running or not using the script.
View 1 RepliesI am trying to run Tomcat on Ubuntu System from a remote host. However, when I exit the terminal, Tomcat process shuts down.
The command I am using to run it is
nohup ./startup.sh &
I installed eclipse and tomcat with package manager. Eclipse and tomcat are running but i can't see tomcat in the eclipse. I just see 'Basic' folder. That is a screenshot [URL]
View 1 Replies View RelatedI run a script manually like/usr/lib/openoffice.org/program/soffice and when I run
:ps -ef|grep openoffice
I get the following,
root 700 1 0 10:45 ? 00:00:00 /bin/sh /usr/lib/openoffice.org/program/soffice -calc
My question is how to check whether this script is running or not (It can be checked every 10 minutes) and how to make it as a service. (I don't have root access to put this in rc.local file or somewhere else).
How do i check if NFS mounts are still up and running?
when i do the command MOUNT , i get some result, but how can i see (or check) if they still up and running? I'm not so familiar with this command, so i hope that someone can guide me
I know that there must be some NFS links mounted, so if one fails, i need to see that with like an echo or something.
I have been able to find repos that contain php 5.3.2 and Pg 8.4.4, but I can not find on that provides an RPM where php is built against Pg 8.4. It is usually 8.1. I also have not been able to figure out if yum can force a rebuild based on the fact that I actually got the correct versions installed, just not using each other. I simply would like to get php built with Pg 8.4 and have it work.
I have found and used the remi repos, but again although he has rpm for each the php is not built against the latest pg
so I wrote a small script that pretty much just takes in two numbers and counts from the first to the second, e.g.
unknown-hacker|544> count.sh 1 3
1
2
3
My problem is I want to make it so that if you input invalid parameters, such as non-numerical characters, more than 2 numbers, etc., you'd get an error message
How can I check which version of bash I'm running
View 2 Replies View RelatedI have a bash script that messages the user periodically. Is there any way in the script to check if the screensaver is running, so the script doesn't spam messages while the user is away? The xscreensaver process is always running in the background, I've noticed.
View 5 Replies View Relatedi've some trouble to write a script on java on linux to check if service(ie:smbd) is runing or not,, could you give me some example? Or if is there any source about it for me to learn? i've two days search with zero result...
View 5 Replies View RelatedI'm trying to get a Tomcat server running using the Java VM -server option on Ubuntu Karmic 9.10 (I'm using the official Karmic AMI on EC2: ami-bb709dd2)
I install Tomcat:
Code:
sudo apt-get -y install tomcat6
I set up a bit of configuration in /etc/default/tomcat6:
Code:
JAVA_OPTS="-Djava.awt.headless=true -Xms1024m -Xmx1024m -XX:PermSize=384m -XX:MaxPermSize=384m"
I can start Tomcat with no problems:
Code:
sudo /etc/init.d/tomcat6 restart
However, if I add the -server option into the JAVA_OPTS variable, like so:
Code:
JAVA_OPTS="-server -Djava.awt.headless=true -Xms1024m -Xmx1024m -XX:PermSize=384m -XX:MaxPermSize=384m"
I get this:
Code:
$ sudo /etc/init.d/tomcat6 restart
* Stopping Tomcat servlet engine tomcat6
...done.
* Starting Tomcat servlet engine tomcat6
Invalid option -server
Cannot parse command line arguments
How do I set the -server option correctly?
after executing the commands
1. ./startup.sh
2. tail -f ../logs/catalina.out
the following error comes on the terminal
.resolveValueIfNecessary(BeanDefinitionValueResolver.java:104)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(Abs tractAutowireCapableBeanFactory.java:1245)
[code]....
I am having a problem.I use Ubuntu 10.04 server edition.Two computers on LAN one with Public Ip A other with local (Class C IP)say it BWith a third computer in same subnet I can access a TomCat application running on B as http://Ip of B:8080/applicationI want to use A as a Reverse Proxy for this application to be reachable from internet.So on Googling I came across some thing known as mod_ajp I enabled that on my Server A asa2enmod proxya2enmod proxy_ajpa2enmod headersbut after that I am not able to understand as how do I define vhost to be able to forward HTTP request which come on A as www.myserver.com/appto B which I can see internally as http://Ip of B:8080/application so Tomcat on B handles this.
View 4 Replies View RelatedI am struggling with some issues Apache-tomcat is running fine, and port:8080 is also LISTEN but when am tiring to access the tomcat web_page is not up ,why ?
View 2 Replies View RelatedIs there a unique command ( common to all Linux Distros, Solaris, Windows ) to know whether a service is installed and running on my system or not??
View 5 Replies View RelatedI have a game server running using java, and it tends to crash sometimes, and only way to start it now is manually, so i thought i could create a script to check periodically if java is running, and if it isn't, run my startup script for the game server also, if it's possible it should log when it actually started the server startup script into a text file or something, so i can check why it crashed.
View 6 Replies View RelatedCannot activate Task Manager.
Message: 'Check if your dcopserver is running'
(ASUS Eee Netbook)
Due to a ton of research I believe I now understand the output of ps, top, and free better than ever, and also have a relatively decent grasp on memory management (virtual address space, etc.) than I ever did before. With that being said, my server is super low on available memory and I can't make 1+1=2 on why it is. I suspect it's Tomcat/JVM (which I admittedly know precious little about). I am rebuilding this server (for a number of reasons) and plan to install 8GB but solving this mystery is key to supporting/promoting my design plans.
Relevant info So, I have very little memory left, I am swapping pretty hardcore, and even though I suspect it's the Tomcat/JVM stuff, it sure doesn't look like it from the memory tools. For that matter though it looks like "nothing" is using memory, or certainly not enough to cause such a low memory problem. The server was rebooted 24 days or so ago because it actually ran out of all virtual memory. How do I solve this mystery? Am I using the wrong tools? Am I misunderstanding my tools? What can I do to track down the processes depleting my memory?
I am using Sphinx search on my webserver and it quits after a certain amount of time leaving my search page broken.Here is a bash script that I want to run every 10mins via cron:
Code:
#!/bin/bash
if pgrep searchd | grep "[0-9]"
[code]...
I have gotten an error message to please check that the dcopserver program is running.Where do I look to see if it is running?
View 3 Replies View Relatedfrom nmap localhost | grep mysql command i will come to know whether mysql server is running or not.my problem is i want to test whether mysql server is running or not in shell script and if it is running i need to tell the user to stop the server to run the shell script.
View 3 Replies View RelatedI want to build a NAS like mini pc to be used as a simple tomcat server (for running Jira and perhaps experimenting a bit) and as a GIT server. What kind of system requirements would I have?
Would something like this:[URL]../nas/n...sed-nas-part-2 be sufficient? And if I'd virtualized everything via VMWares would that make a lot of difference?
My first time installing centos server and adding it to xp home network. I am new to setting up my own network in general. I have a home windows wired ethernet xp network (simple linxs router) with 2 xp boxes and one centos5 box all connected to the same router. I just set up the centos box running tomcat on port 8080. I need to do two very basic things at this point, but am not sure what I need to do:
What do I need to do so I can:
1. Connect in firefox on one of my xp boxes and call the tomcat server running on my centos box?
2. Be able to ftp to centos box from either of my xp boxes?
I have six linux Centos 5.0 Servers. I had to configure the snmp client. I just created a pretty basic configuration snmpd.conf file
Code: rocommunity CompanyCom 10.1.1.10
I installed all of these
lm_sensors-2.10.7-4.el5.i386.rpm
net-snmp-libs-5.3.2.2-7.el5.i386.rpm
net-snmp-5.3.2.2-7.el5.i386.rpm
net-snmp-utils-5.3.2.2-7.el5.i386.rpm
4 of them are working fine, the application installed on 10.1.1.10 can query 4 servers but I got 2 Linux Centos that are in a DMZ, and my networking team already opened ports and configured NAT but the SNMP Server 10.1.1.10 is not able to query them how can I check the snmpd is really running apart from service snmpd status? might be related with the DMZ configuration?
How do I solve the problem of "No swap space, check if decopserver is running" Presume an increase in hidden partition required, my guess. Am using the original Xandros OS.
View 2 Replies View Relatedi was just wondering where can i check to make sure what bit system i am running. 32 or 64,
View 4 Replies View RelatedHow to check whether ssh is running or not ? (I have install ssh)
If not how to make it run ?
I'd like to know if there is a script that can check and see if an application has been closed (I don't know a great deal about bash programming).I'm running an organ programme with this script.
/usr/bin/jackd -r -t5000 -dalsa -dhw:0 -r44100 -p1024 -n2 -P &
java -jar /home/user/jOrgan/jorgan.jar &
jack-rack -s space space &
[code]....
I need a script that is able to check if a service is running or not. It has to do it automatic since it is for restarting a GameServer.
I tried to make one myself, but since the .x86 file has the same name for every server, it is hard to know a way to check if the server is running with the right process.
Is there a way to make a script which is able to check if a service is running (service has same name, but using other ports)
I am using this command (inside a bash script) to check if mailserver is running correctly (port 25)
# echo | telnet localhost 25 | grep "Connected to "
If it does not respond I receive an email alter.
It works good , but sometime it NEVER respond (neither after 1 hour) , so I receive no notification . DO you know alternative command to the command above ?