I just compiled mysql apache and php from source and I have apache to start up from boot but I don't exactly know how to get mysql to do the same.
Edit: Also how do I add mysql to path? Should I just symlink it to somewhere thats in the path or what? And if that is the case wheres the best place to symlink it too.
I am trying to get mysql to start at boot without any success.
The mysqld scripts works fine when run from the command line, but it does not work when i use the links created by chkconfig. I checked the boot.log and found that mysql starts but then it stops or gets shutdown. This is the log message:
Starting mysqld daemon with databases from /data/mysql [ OK ]
Starting cups: [ OK ]
STOPPING server from pid file /var/run/mysqld/mysqld.pid
starting DenyHosts: /usr/bin/denyhosts.py --daemon --config=/usr/share/denyho
sts/denyhosts.cfg
090727 04:35:47 mysqld ended
The same init script works fine in Ubuntu.
Ubuntu server 10.04 comes with a new event based startup system, and I wonder if that can be responsible for this problem. The server has been upgraded from 9.10. On reboot mysql does not always manage to start... /var/log/mysql/error.log has info similar to this:
100511 19:05:00 [ERROR] Can't start server: Bind on TCP/IP port: Cannot assign requested address
100511 19:05:00 [ERROR] Do you already have another mysqld server running on port: 3306 ?
100511 19:05:00 [ERROR] Aborting
So apparently port 3306 is not 100% unused when mysql tries to open it or somehow network connections are not ready, even if mysql start is supposed to wait for 'net-device-up' and 'local-filesystems' according to /etc/init/mysql.conf. This does not happen on all reboots. I am supposed to be able to start it manually with command 'start mysql' but that does not seem to work also. When I try start it again, it says mysql is running but no databases can be reached and mysqld is not active, reboot and good luck is all that helps...
As far as I know there are no firewalls installed, at least none I have manually configured and it has worked with no problems on 9.10. So this new upstart thing seems responsible. It simply does not let mysql wait until it can start in good way. That also explains why it's a random problem. If all starts happen when and if there is free processor time, it does not always start things in the same order on every reboot. The key here is port 3306, or whatever port mysql is configured to use. The upstart system simply needs delay the start until the port is 100% free and available for the system to use.
Recently, few days or maybe a week ago I updated mysql and now mysql service do not start at boot. I must start it manualy, before this update it start automaticly.
View 9 Replies View RelatedCurrently when the system boots, It boots jabberd2 before mysql. So jabber fails. Then, later mysql is loaded. I either want to force jabber to load mysql first, or make the system boot mysql first. I've tried changing /etc/init.d/jabberd2 to say "# Required-Start:
mysql $network $named $remote_fs"...
However, insserv says that mysql service has to be enabled... so I assume that's an issue because mysql is an upstart script.
On my Ubuntu 10.04 LTS Server, mysql does not start at boot. I tried this but does not work.
Code:
root@dev:~# chkconfig mysql ON
The script you are attempting to invoke has been converted to an Upstart job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'K02mysql' missing LSB tags and overrides
insserv: warning: script 'S10vzquota' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart job, but lsb-header is not supported for Upstart jobs .....
How to make sure mysql process comes up automatically after every reboot
I have a mysql database and i use it with apache for my webpages. And I guess it dosen't start when the computer starts so I have to manually start it with "sudo /etc/init.d/mysql start" This returns fail so i went to '/var/run/mysqld/' and the folder was empty. I don't know if this is the problem or not. How can I fix this?
View 9 Replies View RelatedI don't know. I have had tons of issues with the Linux today. Now when I try and start mysql it just fails. the syslog says code...
The command mysql results in:
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
I have even tried to uninstall mysql and reinstall it an nothing works. Any suggestions?
ive been trying to fix this for a while. i dont have the original my.cnf, but i dont even know if thats the error:
Code:
pavel@pvl1:~$ sudo service mysql start
^C
pavel@pvl1:~$ cd /var/log/[code]....
I have trouble with MySQL server on my Ubuntu 11.04.Below is what I get in Terminal
root@linux:/home/karl# /etc/init.d/mysql start
Rather than invoking init scripts through /etc/init.d, use the
service(
[code]....
I just installed a brand new ubuntu server 10.04 32-bit, choosing the LAMP option on install. Upon reboot I couldn't connect to mysql from another machine, so on this new server I changed the file at /var/mysql/my.cnf
[Code]...
I've just upgraded to 9.10, and mysql fails to start. When I do an /etc/init.d/mysql start, I just get
* Starting MySQL database server mysqld ...fail!with no additional errors or information to say what went wrong. I saw this thread http://ubuntuforums.org/showthread.php?t=1322070 but the fix mentioned does not apply, as I don't have the #skip bsd line in my config file.
I have a mysql database and i use it with apache for my webpages. And I guess it dosen't start when the computer starts so I have to manually start it with "sudo /etc/init.d/mysql start" This returns fail so i went to '/var/run/mysqld/' and the folder was empty. I don't know if this is the problem or not. How can I fix this?
View 9 Replies View Relatedmysqld not running on boot, I can start it manually with
Code:
sudo -u mysql mysqld
If I attempt to start it with Upstart I get
Code:
dom@mythbox:~$ sudo start mysql
start: Job failed to start
I want to use the my-huge.cnf file, but when I replace /etc/mysql/my.cnf with the one in /usr/share/doc/mysql-server-5.1/examples/my-huge.cnf, mysql will not start; it is just hanging the process. The only thing i'm seeing in log files is repeating
Sep 26 06:42:51 caseaware kernel: [52647.422669] type=1505 audit(1285497770.990:1240): operation="profile_replace" pid=28591 name="/usr/sbin/mysqld"
Sep 26 06:43:22 caseaware kernel: [52678.675282] type=1505 audit(1285497802.320:1241):
[code]....
Since /etc/rc2.d/S19mysql does not exists anymore, and then init.d/mysql uses /sbin/start, I am unable to use mysql server anymore: me@mycomputer~#start mysql [ret] ...... for hours this command never returns so that ^C aborts...
me@mycomputer~#ps axw |grep mysql ( no results, no mysql!!! ) me@mycomputer~#stop mysql [ret] no returns either!!! This upstart [start|stop] thing seems a total failure for mysql!!!
I was installing a 2 server cluster ISPConfig3 with the help of GlusterFS. I was following this manual - Link
In the server the file /etc/glusterfs/glusterfsd.vol
Code:
# Configuration for the mysql server volume
volume posix-mysql
type storage/posix
option directory /media/big/myweb/export-mysql
[Code].....
I am not able to start mysql server...when i type command sevice mysqld start it saysMySQL Daemon failed to start.Starting mysqld: [FAILED]so how to solve this problem ?
View 10 Replies View RelatedI want to compile Mysql for embedded arm systems that has embedded linux in it. Does any body have such this experience to guide me through it step by step?
View 1 Replies View RelatedAlright, so I installed the c5-testing versions of httpd, php, and mysql, since my server is used for other daemons primarily and these aren't used as production servers I decided to test the bleeding edge versions of these, report any bugs I find, etc. The problem is, since I updated httpd and mysqld they no longer start up at boot. I tried using chkconfig --add with both of them, but both their init.d scripts have - for levels, so I did not assign any levels. They still do not start up at boot. [URL]
View 2 Replies View RelatedSo recently my MySQL server doesn't startup when Ubuntu boots (it used to) and therefore causes database errors with my Web applications. How do I add MySQL to the run at startup list?
View 1 Replies View RelatedI recently installed an Ubuntu 10.04LTS server. I have zabbix-server on that machine, and I noticed that after reboot it won't start. Probabily, the mix of upstart and old init.d scripts result in zabbix starting when mysql is not active yet, in fact in zabbix-server.log I see it cannot reach db. How can I make sure zabbix-server waits for mysql?
View 9 Replies View RelatedI managed to find an older version of the rt3572 driver to compile to get this dongle to work fine, and it did. After that I added "module rt3572sta" (or whatever it is, not on Ubuntu to check now) to the end of /etc/modules. However, when I boot up Ubuntu, most of the time the driver won't load. If I run 'modprobe rt3572sta' from the terminal, I get this message -
[Code]....
I thought that the problem is in the phpMyAdmin not in the mysql. But now i think different. It seems that the problem is right in the mysql. I think that there was no root user, when mysql was freshly installed. Unfortunately i did everything i can find on internet (some tutorials) but they don`t helped me at all, maybe i fu**ed up the mysql service. So i reinstalled it, and when i want to start it there is no file mysql.sock and i get the following:
linux-nepg:~ # service mysql restart
Restarting service MySQL
Shutting down service MySQL done
Starting service MySQL warning: /var/lib/mysql/mysql.sock didn't appear within 30 seconds
I don't want to screw up my system, but I need newer versions of packages then the ones in the apt repos. What is the community consensus on the best way to mix apt package management with building bleeding edge packages from source?
Should I build the source into a package and install it with apt? Should I avoid make install?
I would also like to be able to use multiple versions of the same package, and have some sort of sym link or something to determine which version gets executed.
I have installed Mysql in Ubuntu 9, for the use of roundcube database.After installing iam getting the error like this
* Stopping MySQL database server mysqld [ OK ]
* Starting MySQL database server mysqld [ OK ]
* Checking for corrupt, not cleanly closed and upgrade needing tables.
So because of this in the roundcube configuration its giving the error message that MYSQL is not installed. So Kindly give me a idea how to solve this.
i was trying to allow remote access to mysql by following mysql was running perfectly until i got here :
Code:
/sbin/iptables -A INPUT -i eth0 -s 192.168.1.0/24 -p tcp --destination-port 3306 -j ACCEPT
i changed my.cnf bind-address line to : "bind-address = 127.0.0.1" and nothing
[code]....
My problem is that the samba daemon does not start on boot-up anymore on my file-sharing server.Samba starts flawlessly if start it manually.If I run:
Code:
/etc/init.d/samba status
I get :
[code].....
I know Ubuntu has changed the startup system in 10.04 and I am wondering how to go about starting my liferay server at boot (instead of starting manually).
There's already a startup script, can I setup a symlink to somewhere to have it start automatically?
I've tried searching through documentation and google but most of it applies to older versions of Ubuntu.
I have recently set up my web server using the LAMPP package for Ubuntu. Now I'm running Ubuntu Server 10 so my machine boots into the console and not gdm. Also I have my machine autologin as root so I can simply turn my server on and not mess around with logins. Now I created a simple shellscript for starting lampp and then I put it into etc/init.d/, chmod -x file.sh to give it executable permissions, then I update-rc.d file.sh defaults but nothing happens on startup. It simple takes me to the console and nothing more happens. I have to manually start lampp on every bootup.
View 1 Replies View Related